Signal converter/disconnector, screw connection weidmüller was4 ccc dc 4-20/0-20ma 8445010000 1 ks

The externally supplied ACT20M-CI-CO, MAS RPS/RPSH, MCZ CFC and WAS/WAZ 4/5 C signal converters/supply isolators can transmit, isolate and convert standardised DC current signals. They are optionally available in widths of 6 mm (ACT20M/MCZ), 12.5 mm (WAS/WAZ4) or 17.5 mm (WAS/WAZ5). The input and output circuits are completely electrically isolated, as is the power supply. The input signal is converted into a DC current/voltage value (ACT20M, WAS/WAZ) or into a proportional frequency (MCZ CFC) between 0–1/4/8/16 KHz. The WAVESERIES signal converters are available with a limiting frequency of either 10 Hz (WAS/WAZ4) or 20 KHz (WAS/WAZ5) so that they can process signals quickly. The MAS/RPS/RPSH supply isolator can supply 2-wire sensors externally. They can also be used optionally to transmit the HART protocol (MAS RPSH). The 24 VDC supply voltage can be cross-connected on the module side via the CH20M BUS profile (ACT20M series) or using the ZQV4N (MAS/MCZ) or ZQV 2.5N (WAS/WAZ) pluggable jumpers. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Co4 CCC DC 4-20 / 0-20MA (conrad.cz)

The externally supplied ACT20M-CI-CO, MAS RPS/RPSH, MCZ CFC and WAS/WAZ 4/5 C signal converters/supply isolators can transmit, isolate and convert standardised DC current signals. They are optionally available in widths of 6 mm (ACT20M/MCZ), 12.5 mm (WAS/WAZ4) or 17.5 mm (WAS/WAZ5). The input and output circuits are completely electrically isolated, as is the power supply. The input signal is converted into a DC current/voltage value (ACT20M, WAS/WAZ) or into a proportional frequency (MCZ CFC) between 0–1/4/8/16 KHz. The WAVESERIES signal converters are available with a limiting frequency of either 10 Hz (WAS/WAZ4) or 20 KHz (WAS/WAZ5) so that they can process signals quickly. The MAS/RPS/RPSH supply isolator can supply 2-wire sensors externally. They can also be used optionally to transmit the HART protocol (MAS RPSH). The 24 VDC supply voltage can be cross-connected on the module side via the CH20M BUS profile (ACT20M series) or using the ZQV4N (MAS/MCZ) or ZQV 2.5N (WAS/WAZ) pluggable jumpers. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. WAZ4 CVC DC 4-20/0-10 V (conrad.cz)

The ACT20M-CI-CO-OLP, WAS/WAZ5 OLP signal isolator/splitter (2-wire system) is supplied via the output current loop and has an analogue DC current input. The 1- and 2-channel signal isolators are supplied from the current loop. They are available in the 6.1 mm (ACT20M series) or 17.5 mm (WAVESERIES) housings. The input and output circuits are electrically isolated from each other. The power is supplied via the 4–20 mA current loop on the output side. The devices come optionally in a splitter version with two loop-fed outputs. The devices can be mounted on a DIN rail and consume minimal power. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Signal converters with output-loop power supplies are used in a variety of application processes as signal isolators and signal multipliers (splitters) and signal amplifiers. They can be used to eliminate measurement errors caused by differences in earth potentials. ACT20M-CI-CO-OLP-S (conrad.cz)

The ACT20M-CI-CO-OLP, WAS/WAZ5 OLP signal isolator/splitter (2-wire system) is supplied via the output current loop and has an analogue DC current input. The 1- and 2-channel signal isolators are supplied from the current loop. They are available in the 6.1 mm (ACT20M series) or 17.5 mm (WAVESERIES) housings. The input and output circuits are electrically isolated from each other. The power is supplied via the 4–20 mA current loop on the output side. The devices come optionally in a splitter version with two loop-fed outputs. The devices can be mounted on a DIN rail and consume minimal power. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Signal converters with output-loop power supplies are used in a variety of application processes as signal isolators and signal multipliers (splitters) and signal amplifiers. They can be used to eliminate measurement errors caused by differences in earth potentials. ACT20M-2CI 2CO-OLP-S (conrad.cz)

The MCZ VFC and WAS/WAZ4/5 signal converters can transmit, isolate and convert analogue DC voltages. They are optionally available in widths of 6 mm (MCZ), 12.5 mm (WAS/WAZ4) or 17.5 mm (WAS/WAZ5). The input and output circuits are completely electrically isolated, as is the power supply. The input signal is converted into a DC current/voltage value (WAS/WAZ) or into a proportional frequency (MCZ VFC) between 0–1/4/8/16 KHz. The WAVESERIES signal converters are available with a limiting frequency of either 10 Hz (WAS/WAZ4) or 20 KHz (WAS/WAZ5). The 24 VDC supply voltage can be cross-connected on the module side using ZQV4N (MCZ) or ZQV 2,5N (WAS/WAZ) jumpers. WAZ5 VCC 0-10 V / 4-20MA (conrad.cz)

The ACT20M-CI-CO-ILP, MCZ CCC and WAS5 CCC LP are 1/2-channel passive isolators that are supplied via the input loop current. They are optionally available in 6 mm (ACT20M/ MCZ series) or 17.5 mm (WAS5 CCC LP) housings. The input and output circuits are completely, electrically isolated from each other. The passive isolators are designed with 1 or 2 channels. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Passive isolators are used to electrically isolate normalised signals (from 0/4 to 20 mA).The modules get their power supply from the current loop on the input side. The power for signal transmission and supply comes from the active 0/4–20 mA signal. They have very low current consumption and can be used anywhere in the field where no suitable power supply is available. These devices are used in a variety of application processes as signal isolators and signal multipliers. They can be used to eliminate measurement errors caused by differences in earth potentials. Co5 CCC LP 0-20 / 0-20mA (conrad.cz)

The ACT20M-CI-CO-ILP, MCZ CCC and WAS5 CCC LP are 1/2-channel passive isolators that are supplied via the input loop current. They are optionally available in 6 mm (ACT20M/ MCZ series) or 17.5 mm (WAS5 CCC LP) housings. The input and output circuits are completely, electrically isolated from each other. The passive isolators are designed with 1 or 2 channels. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Passive isolators are used to electrically isolate normalised signals (from 0/4 to 20 mA).The modules get their power supply from the current loop on the input side. The power for signal transmission and supply comes from the active 0/4–20 mA signal. They have very low current consumption and can be used anywhere in the field where no suitable power supply is available. These devices are used in a variety of application processes as signal isolators and signal multipliers. They can be used to eliminate measurement errors caused by differences in earth potentials. Co5 CCC LP 0-20 / 0-20mA (conrad.cz)

WAS/WAZ6 TTA is a universal signal converter and trip amplifier that can be configured on the PC. Combines the functions of isolation, transmission, linearisation and trip amplification in a single module. These exceptional characteristics and outstanding configurability combine to make the TTA truly unique. The TTA functions with stability and precision under a wide range of voltages and ambient temperatures. It is compatible with all standard sensor types. Universal input signals: temperature signals such as resistance thermometer, thermocouple, potentiometer, frequency transmitter, DC voltage signals and current signals Loop-powered or passive input Wide-range power supply: 18 – 264 V AC/DC User-defined linearization Inputs and outputs can be configured on PC Combined analogue and relay output Ambient temperature range: -40 °C …70 °C The CBX200 USB interface is used to connect to the PC. The WAS/WAZ6 TTA is also offered as an option with ATEX Zone 2 and UL C1D2 approvals. Co6 TTA EX (conrad.cz)

The MCZ VFC and WAS/WAZ4/5 signal converters can transmit, isolate and convert analogue DC voltages. They are optionally available in widths of 6 mm (MCZ), 12.5 mm (WAS/WAZ4) or 17.5 mm (WAS/WAZ5). The input and output circuits are completely electrically isolated, as is the power supply. The input signal is converted into a DC current/voltage value (WAS/WAZ) or into a proportional frequency (MCZ VFC) between 0–1/4/8/16 KHz. The WAVESERIES signal converters are available with a limiting frequency of either 10 Hz (WAS/WAZ4) or 20 KHz (WAS/WAZ5). The 24 VDC supply voltage can be cross-connected on the module side using ZQV4N (MCZ) or ZQV 2,5N (WAS/WAZ) jumpers. WAZ4 VVC DC 0-10/0-10 V (conrad.cz)

The MCZ VFC and WAS/WAZ4/5 signal converters can transmit, isolate and convert analogue DC voltages. They are optionally available in widths of 6 mm (MCZ), 12.5 mm (WAS/WAZ4) or 17.5 mm (WAS/WAZ5). The input and output circuits are completely electrically isolated, as is the power supply. The input signal is converted into a DC current/voltage value (WAS/WAZ) or into a proportional frequency (MCZ VFC) between 0–1/4/8/16 KHz. The WAVESERIES signal converters are available with a limiting frequency of either 10 Hz (WAS/WAZ4) or 20 KHz (WAS/WAZ5). The 24 VDC supply voltage can be cross-connected on the module side using ZQV4N (MCZ) or ZQV 2,5N (WAS/WAZ) jumpers. WAZ5 VVC 0-10 V / 0-10 V (conrad.cz)

The ACT20M-CI-CO-ILP, MCZ CCC and WAS5 CCC LP are 1/2-channel passive isolators that are supplied via the input loop current. They are optionally available in 6 mm (ACT20M/ MCZ series) or 17.5 mm (WAS5 CCC LP) housings. The input and output circuits are completely, electrically isolated from each other. The passive isolators are designed with 1 or 2 channels. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Passive isolators are used to electrically isolate normalised signals (from 0/4 to 20 mA).The modules get their power supply from the current loop on the input side. The power for signal transmission and supply comes from the active 0/4–20 mA signal. They have very low current consumption and can be used anywhere in the field where no suitable power supply is available. These devices are used in a variety of application processes as signal isolators and signal multipliers. They can be used to eliminate measurement errors caused by differences in earth potentials. WAZ5 CCC LP 0-20 / 0-20mA (conrad.cz)

The configurable WTS4/WTZ4 PT100 temperature signal converter with external power supply in 12.5 mm width, for recording and transforming PT100 sensors in standardised DC current and voltage signals. 2-, 3- and 4-wire PT100 sensors can be connected on the input side. The temperature ranges can be selected using DIP switches. The input and output circuits are not electrically isolated from each other. The output is used for the 24 VDC power supply. The WTS4/WT/4 Thermo comes with either a screw or tension-clamp wire connection. The 24 VDC supply voltage can be bridged using pluggable ZQV 2,5N jumpers on the module side. WTS4 PT100/4 C 0/4 až 20 mA (conrad.cz)

The configurable MAS/MAZ DC/DC select and MAS DC/DC select HI: DC signal isolating converters with external power supply in 6.1 mm width, for transmitting and isolating standardised analogue DC current and voltage signals. The input and output parameters can be configured as required using DIP switches. The isolating transformers are designed with 0.5 kV or 2.5 kV (DC/DC select HI) of complete electrical isolation. The 24 V DC voltage supply can be bridged module by module using the ZQV 4N plug-in cross-connectors. The MI 8 A-I/O S-SUBD15Binterface module makes it easy to carry out byte-wise system wiring with pre-assembled cables on the inputs or outputs. They can be used in many applications around the world because of their international approvals (cULus, C1D2 and ATEX Zone2). MAZ DC/DC select (conrad.cz)

Frequency signal converter, Screw connection Weidmüller DK F-U DK5 0-16KHZ 24V 8283810001 10 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

WAS/WAZ5 DC/Alarm analogue DC current/voltage signal converters with integrated limit-value monitoring and external power supply. The input and output parameters can be configured. During operation, the analogue value on the input side is continuously monitored. The upper and lower operating points can be adjusted and are switched via relays. Various monitoring functions such as fail-safe, non fail-safe, high-/low trip and hysteresis can be adjusted via DIP switches. The WAS/WAZ5 DC/Alarm is constructed with 3-way isolation. Either screw or tension-clamp wire connections are available for the monitoring modules. The 24 VDC supply voltage can be bridged using pluggable ZQV 2.5N cross-connectors on the module side. The 17.5 mm wide monitoring components can be used anywhere within the electrical cabinet or in process and industrial automation applications. DC/alarm CO5 (conrad.cz)

The constantly increasing demand for automation technology means that ever larger amounts of data have to be processed. A highly diverse range of interface converters in serial and digital form are used in such instances. They are primarily used to adapt different data protocols and for converting analogue signals into digital ones or vice versa. WDS2 RS232/TTY (conrad.cz)

The constantly increasing demand for automation technology means that ever larger amounts of data have to be processed. A highly diverse range of interface converters in serial and digital form are used in such instances. They are primarily used to adapt different data protocols and for converting analogue signals into digital ones or vice versa. WDS2 RS232/RS485/422 (conrad.cz)

Connection terminals for the ACT20X thermal modules for external cold-junction compensation ACT20X-CJC HTI-S PRT 21 (conrad.cz)

Connection terminals for the ACT20X thermal modules for external cold-junction compensation ACT20X-CJC HTI-S PRT 11 (conrad.cz)

Univerzální žárovky pro perfektní zalícování jako signálky v elektronice nebo v modelářství. čirá·12 V·Připojení mini lampy: T1 1/4 (conrad.cz)

Nastavitelné výstupní napětí·Možnost obrácení polarity·Vč. 8 DC adaptér Máte univerzální napájecí zdroj pro notebooky značky Hama, ale vhodný adaptér pro váš notebook byl nejsou součástí dodávky? Pro většinu běžných modelů etablierter značek jsou k dispozici adaptér, doporučujeme elegantním vás tato během několika dní na.de/adaptér servisní zdarma ke! kostenlos zu! DC/DC měniče · 8 adaptérů · . (conrad.cz)

The configurable WTS4/WTZ4 PT100 temperature signal converter with external power supply in 12.5 mm width, for recording and transforming PT100 sensors in standardised DC current and voltage signals. 2-, 3- and 4-wire PT100 sensors can be connected on the input side. The temperature ranges can be selected using DIP switches. The input and output circuits are not electrically isolated from each other. The output is used for the 24 VDC power supply. The WTS4/WT/4 Thermo comes with either a screw or tension-clamp wire connection. The 24 VDC supply voltage can be bridged using pluggable ZQV 2,5N jumpers on the module side. WTZ4 PT100/4 C 0/4 až 20 mA (conrad.cz)

DC/f transformer, Screw connection Weidmüller DK U-F DK5 0-10V 8242040000 10 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

The configurable WTS4/WTZ4 PT100 temperature signal converter with external power supply in 12.5 mm width, for recording and transforming PT100 sensors in standardised DC current and voltage signals. 2-, 3- and 4-wire PT100 sensors can be connected on the input side. The temperature ranges can be selected using DIP switches. The input and output circuits are not electrically isolated from each other. The output is used for the 24 VDC power supply. The WTS4/WT/4 Thermo comes with either a screw or tension-clamp wire connection. The 24 VDC supply voltage can be bridged using pluggable ZQV 2,5N jumpers on the module side. WTZ4 PT100/3 C 0/4 až 20 mA (conrad.cz)

The configurable WTS4/WTZ4 PT100 temperature signal converter with external power supply in 12.5 mm width, for recording and transforming PT100 sensors in standardised DC current and voltage signals. 2-, 3- and 4-wire PT100 sensors can be connected on the input side. The temperature ranges can be selected using DIP switches. The input and output circuits are not electrically isolated from each other. The output is used for the 24 VDC power supply. The WTS4/WT/4 Thermo comes with either a screw or tension-clamp wire connection. The 24 VDC supply voltage can be bridged using pluggable ZQV 2,5N jumpers on the module side. WTZ4 PT100/2 C 0/4 až 20 mA (conrad.cz)

The ACT20M-CI-CO-ILP, MCZ CCC and WAS5 CCC LP are 1/2-channel passive isolators that are supplied via the input loop current. They are optionally available in 6 mm (ACT20M/ MCZ series) or 17.5 mm (WAS5 CCC LP) housings. The input and output circuits are completely, electrically isolated from each other. The passive isolators are designed with 1 or 2 channels. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Passive isolators are used to electrically isolate normalised signals (from 0/4 to 20 mA).The modules get their power supply from the current loop on the input side. The power for signal transmission and supply comes from the active 0/4–20 mA signal. They have very low current consumption and can be used anywhere in the field where no suitable power supply is available. These devices are used in a variety of application processes as signal isolators and signal multipliers. They can be used to eliminate measurement errors caused by differences in earth potentials. (conrad.cz)

Weidmüller WQV 4/4 1054660000-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)

WAS/WAZ5 DC/Alarm analogue DC current/voltage signal converters with integrated limit-value monitoring and external power supply. The input and output parameters can be configured. During operation, the analogue value on the input side is continuously monitored. The upper and lower operating points can be adjusted and are switched via relays. Various monitoring functions such as fail-safe, non fail-safe, high-/low trip and hysteresis can be adjusted via DIP switches. The WAS/WAZ5 DC/Alarm is constructed with 3-way isolation. Either screw or tension-clamp wire connections are available for the monitoring modules. The 24 VDC supply voltage can be bridged using pluggable ZQV 2.5N cross-connectors on the module side. The 17.5 mm wide monitoring components can be used anywhere within the electrical cabinet or in process and industrial automation applications. WAZ5 DC/alarm (conrad.cz)

Pojistka DC ESKA 522623, 522623, (Ø x d) 5 mm x 20 mm 4 A 250 V/DC T pomalá, 1 ks od výrobce ESKA v kategorii Pojistky za skvělou cenu u Conrada. (conrad.cz)

WAS / 2 VMR 1ph/3ph: AC/DC voltage monitoring components with digital output and external supply Depending on the version, the input side can be used to measure and monitor single-phase voltages up to 260 VAC/DC or three-phase voltages up to 400 VAC/DC. There are one or two digital switching outputs for direct under-voltage or surge voltage monitoring available on the output side. The switching thresholds, low/high trip limits and hysteresis can be adjusted as required. The input and output circuits have 4 kV of electrical isolation. The monitoring components can be mounted on a DIN rail and are integrated in a 22.5 mm wide housing. Co2 VMR 3ph (conrad.cz)

RS I-D8 A/D converters digitize analogue current signals and have 8-bit accuracy. All modules are equipped with a hold function, so that the momentary output value is maintained even during a change to the input value. You can find additional information describing the input/output characteristics of the A/D converter on our web site at weidmueller.com/54103/Downloads/Printmedien/HandbuecherBeipackzettel/ cw_index.aspx RS I-D8 0...20 MA (conrad.cz)

{Reference (Object) not found: prod27560759870516} RS D8-I 0...20 MA (conrad.cz)

Signálový měnič signálu Weidmüller ACT20M-AI-AO-E-S 1176010000, 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Output current loop fed AC current monitoring components WAS/WAZ1 CMA LP. They can measure single-phase 50/60 Hz AC currents of up to 10 A using the Root Mean Square (RMS) method on the input side. They can also be switched between three ranges. No external power supply is used; the supply is only via the 4...20 mA current loop on the output side. The input and output circuits are securely isolated with 4 kV. The monitoring components come in a 17.5-mm-wide WAVEBOX housing. These devices can be used in many process automation applications because they are not dependent on an external power supply. International approvals (such as ATEX Zone 2 and UL C1D2) also permit usage in explosion-risk zones. Co1 CMA LP 1/5/10 A EX (conrad.cz)

Output current loop fed AC current monitoring components WAS/WAZ1 CMA LP. They can measure single-phase 50/60 Hz AC currents of up to 10 A using the Root Mean Square (RMS) method on the input side. They can also be switched between three ranges. No external power supply is used; the supply is only via the 4...20 mA current loop on the output side. The input and output circuits are securely isolated with 4 kV. The monitoring components come in a 17.5-mm-wide WAVEBOX housing. These devices can be used in many process automation applications because they are not dependent on an external power supply. International approvals (such as ATEX Zone 2 and UL C1D2) also permit usage in explosion-risk zones. Co1 CMA LP 1/5/10 A ac (conrad.cz)

Configurable RTD signal isolator/converter WAS5/WAZ5 PRO RTD with external power supply with 17.5 mm width, for recording, transforming and isolating RTD sensors in standardised DC current and voltage signals 2-/3-/4-wire PT100, PT1000, Ni100, Ni10000, Cu10/25/50/100, potentiometers or fixed resistors can optionally be connected on the input side. The input and output parameters (e.g. sensor type, temperature range and standardised output signal) can be configured using the DIP switches. The input/output channels and 24 V DC power supply are completely isolated with 4 kV. The PRO RTD isolating transformers come with either a screw or tension-clamp wire connection. The 24 V DC supply voltage can be bridged using pluggable ZQV 2.5N jumpers on the module side. Most models can be adjusted and set using the WAVETOOL program available from Weidmüller's website. They can be used in many applications around the world because of their international approvals such as cULus, CULusEX and GL. Co5 PRO RTD Cu (conrad.cz)

Analogový výstup s přepínačem Hand/Auto (manual/auto) a zpětnou vazbou (conrad.cz)

Interfaces with diodes for surge voltage protection, lamp testing or protection against reversed polarity. 20 RSD LP/LP (conrad.cz)

PS DC/DC converter fo 9 to 60V trucks Technické parametry *Typ produktu: Vlastní zdroj napájení *Výstupní výkon: 60 W *Typ vstupního napětí: DC *Rozsah vstupního napětí: 9 V DC až 60 V DC (patro.cz)

Weidmüller KLBUE 10-20 SC 1712321001-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)

Upravený zástrčkový konektor pro senzory - aktory Escha AL-WAS4-5/S370 8043818 zástrčka, rovná, 5.00 m, 1 ks od výrobce Escha v kategorii Konektory pro senzory/aktory za skvělou cenu u Conrada. (conrad.cz)

Kvalitní průmyslové provedení v těle z nerezové oceli. Normovaný signál linearizovaný a s teplotní kompenzací. Oblasti použití: pneumatické, hydraulické a jiné průmyslové aplikace. Napájení (napětí) pomocí smyčkového proudu. 4pólová připojovací zástrčka, DIN 43650. (conrad.cz)

Kvalitní průmyslové provedení v těle z nerezové oceli. Normovaný signál linearizovaný a s teplotní kompenzací. Oblasti použití: pneumatické, hydraulické a jiné průmyslové aplikace. 4pólová připojovací zástrčka, DIN 43650. (conrad.cz)

Kvalitní průmyslové provedení v těle z nerezové oceli. Normovaný signál linearizovaný a s teplotní kompenzací. Oblasti použití: pneumatické, hydraulické a jiné průmyslové aplikace. Napájení (napětí) pomocí smyčkového proudu. 4pólová připojovací zástrčka, DIN 43650. (conrad.cz)

Weidmüller WQV 10/4 1055060000-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)

Weidmüller WQV 6/4 1054860000-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)

Weidmüller WQV 4/2 1051960000-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)

Weidmüller WQV 4/10 1052060000-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)

Weidmüller FM 4/TS35 687900000-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)

Weidmüller KLBUE 4-13.5 1592810000-1, 1 ks od výrobce Weidmüller v kategorii Příslušenství pro řadové svorkovnice Weidmüller za skvělou cenu u Conrada. (conrad.cz)