Interface converter, screw connection weidmüller wds2 rs232/rs485/422 8615700000 1 ks

The constantly increasing demand for automation technology means that ever larger amounts of data have to be processed. A highly diverse range of interface converters in serial and digital form are used in such instances. They are primarily used to adapt different data protocols and for converting analogue signals into digital ones or vice versa. WDS2 RS232/RS485/422 (conrad.cz)

The constantly increasing demand for automation technology means that ever larger amounts of data have to be processed. A highly diverse range of interface converters in serial and digital form are used in such instances. They are primarily used to adapt different data protocols and for converting analogue signals into digital ones or vice versa. WDS2 RS232/TTY (conrad.cz)

Kolíková lišta je součástí dodávky (není pájena)·Umožňuje přístup až 128 zařízení ke stavovým LED diodám sběrnice na vysílacím a přijímacím vedení (conrad.cz)

Použití rozhraní konvertoru lze ovládat Speeddome kamera (752777, 752790, 752804) pomocí vašeho PC. Konvertor rozhraní je připojen přes sériový port (RS232) na PC, Speed dome připojení pomocí 2drátového vedení RS485 sběrnice rozhraní. Celkem můžete nastavit až 31 Speeddome kamer počítačem. Speeddome-kamera je připojena přímo na konvertor, ostatních 30 kamer připojte mezi sebou. Maximální dosah přenosu je až 1200 m. Konvertuje RS-232 na RS-485, poloviční-duplex (conrad.cz)

Frequency signal converter, Screw connection Weidmüller DK F-U DK5 0-16KHZ 24V 8283810001 10 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

The ACT20M-CI-CO-OLP, WAS/WAZ5 OLP signal isolator/splitter (2-wire system) is supplied via the output current loop and has an analogue DC current input. The 1- and 2-channel signal isolators are supplied from the current loop. They are available in the 6.1 mm (ACT20M series) or 17.5 mm (WAVESERIES) housings. The input and output circuits are electrically isolated from each other. The power is supplied via the 4–20 mA current loop on the output side. The devices come optionally in a splitter version with two loop-fed outputs. The devices can be mounted on a DIN rail and consume minimal power. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Signal converters with output-loop power supplies are used in a variety of application processes as signal isolators and signal multipliers (splitters) and signal amplifiers. They can be used to eliminate measurement errors caused by differences in earth potentials. ACT20M-CI-CO-OLP-S (conrad.cz)

The ACT20M-CI-CO-OLP, WAS/WAZ5 OLP signal isolator/splitter (2-wire system) is supplied via the output current loop and has an analogue DC current input. The 1- and 2-channel signal isolators are supplied from the current loop. They are available in the 6.1 mm (ACT20M series) or 17.5 mm (WAVESERIES) housings. The input and output circuits are electrically isolated from each other. The power is supplied via the 4–20 mA current loop on the output side. The devices come optionally in a splitter version with two loop-fed outputs. The devices can be mounted on a DIN rail and consume minimal power. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Signal converters with output-loop power supplies are used in a variety of application processes as signal isolators and signal multipliers (splitters) and signal amplifiers. They can be used to eliminate measurement errors caused by differences in earth potentials. ACT20M-2CI 2CO-OLP-S (conrad.cz)

WAS/WAZ6 TTA is a universal signal converter and trip amplifier that can be configured on the PC. Combines the functions of isolation, transmission, linearisation and trip amplification in a single module. These exceptional characteristics and outstanding configurability combine to make the TTA truly unique. The TTA functions with stability and precision under a wide range of voltages and ambient temperatures. It is compatible with all standard sensor types. Universal input signals: temperature signals such as resistance thermometer, thermocouple, potentiometer, frequency transmitter, DC voltage signals and current signals Loop-powered or passive input Wide-range power supply: 18 – 264 V AC/DC User-defined linearization Inputs and outputs can be configured on PC Combined analogue and relay output Ambient temperature range: -40 °C …70 °C The CBX200 USB interface is used to connect to the PC. The WAS/WAZ6 TTA is also offered as an option with ATEX Zone 2 and UL C1D2 approvals. Co6 TTA EX (conrad.cz)

The externally supplied ACT20M-CI-CO, MAS RPS/RPSH, MCZ CFC and WAS/WAZ 4/5 C signal converters/supply isolators can transmit, isolate and convert standardised DC current signals. They are optionally available in widths of 6 mm (ACT20M/MCZ), 12.5 mm (WAS/WAZ4) or 17.5 mm (WAS/WAZ5). The input and output circuits are completely electrically isolated, as is the power supply. The input signal is converted into a DC current/voltage value (ACT20M, WAS/WAZ) or into a proportional frequency (MCZ CFC) between 0–1/4/8/16 KHz. The WAVESERIES signal converters are available with a limiting frequency of either 10 Hz (WAS/WAZ4) or 20 KHz (WAS/WAZ5) so that they can process signals quickly. The MAS/RPS/RPSH supply isolator can supply 2-wire sensors externally. They can also be used optionally to transmit the HART protocol (MAS RPSH). The 24 VDC supply voltage can be cross-connected on the module side via the CH20M BUS profile (ACT20M series) or using the ZQV4N (MAS/MCZ) or ZQV 2.5N (WAS/WAZ) pluggable jumpers. International approvals (such as ATEX Zone 2, UL C1D2 and FM Div2) permit use in explosion-risk zones. Co4 CCC DC 4-20 / 0-20MA (conrad.cz)

Praktický konvertor pro převod z rozhraní RS-232 na 2vodičové vedení. Tento konvertor se jednoduše zapojí do sériového portu a poskytuje tak 2vodičové vedení až do vzdálenosti 1 200 metrů. Konvertuje sériový signál na 2vodičový RS485·Rychlost až 115 200 baud·Vzdálenost až 1 200 metrů Konvertor·Svorkovnice·Síťový zdroj 5 V, 2 A·Návod. (conrad.cz)

Distributor module with 2 each of 8-, 16- or 72-pole voltage potentials (P1, P2). RS VERTIKÁLNÍ16 LPK2 (conrad.cz)

Distributor module with 2 each of 8-, 16- or 72-pole voltage potentials (P1, P2). RS VERTIKÁLNÍ8 LPK2 (conrad.cz)

Interfaces with diodes for surge voltage protection, lamp testing or protection against reversed polarity. 10 RSD LP/LP (conrad.cz)

Interfaces with diodes for surge voltage protection, lamp testing or protection against reversed polarity. 20 RSD LP/LP (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 1W R S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 1W R S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 1W H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 1W H S (conrad.cz)

The analogue interfaces are equipped with SubD connectors. Thus they offer sufficient shielding for analogue signal transmission. They are also equipped with very useful isolators and test sockets for measuring voltage or current. RS 8 AI1AO MICRO SD S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 2W H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 3W H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 2W R S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 2W R S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 3W H S (conrad.cz)

Distributor module with 4 voltage potentials (P1,P2,P3,P4) in 20P1,20P2,20P3and 20P4 for tension-clamp or screw connection. RS VERTIKÁLNÍ 4P 20X4 S (conrad.cz)

Distributor module with 6 voltage potentials (P1,P2,P3,P4,P5,P6) in 12P1,12P2,12P3 ,12P4,12P5 and 12P6 for tension-clamp or screw connection. RS VERTIKÁLNÍ 6P 12X6 S (conrad.cz)

Digital output interface per-relay for electrical signal transmission between the PLC and the field. Electrical isolation by pluggable relays. Integrated LED status display. Screw or tension clamp-connection. Additional functions: in-series fuse or isolator 2 versions available: compact (RSS relay) or standard (RCL relay). RSM-12 C 1 CO S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 1W L H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 1W L H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 1W I R S (conrad.cz)

Interfaces with diodes for surge voltage protection, lamp testing or protection against reversed polarity. RSD K22 LP/LP (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 3W I R S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 2W F R S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 2W F R S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 2W L H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 2W F H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 8 IO 2W L H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 12 IO 2W L H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 3W L H S (conrad.cz)

Interfaces with diodes for surge voltage protection, lamp testing or protection against reversed polarity. 40 RSD LP/LP (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 2W L H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 2W F H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 3W L H S (conrad.cz)

Interface converter, for the isolation of RS-232 (V.24) interfaces, 4 channels, rail-mountable (conrad.cz)

Compact interfaces for transmitting 32 digital input/output signals (RSF SPS). Signals optionally with byte grouping (can be set using jumper). Can be switched between positive or negative signal (set with jumper) An optional LED status display shows the status and the operating voltages. Each circuit can be protected by 5x20 mm individual fuses. Available with tension-clamp or screw connection. RSF PLC 1W 32 IO LED (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 32 IO 1W I-L H S (conrad.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 1W I-L H S (conrad.cz)

The MICROINTERFACE MI8A-I/O S-SUBD15B analogue adapter is mounted to the connection terminals of the MICROSERIES analogue signal converter. It offers the option to transmit the signals from 8 analogue converters and two MI-A-PSM24 VDC power-feed modules via pre-assembled cables directly to the controller. Thus, the byte-wise block structure of the MICROSERIES MAS analogue signal converters can be set up with only 60 mm of width. Power is supplied via the signal line and can be optionally cross-connected using ZQV 4/N bridges. (conrad.cz)

Sériové rozhraní Interface Star Micronics IFT BD400D je určené pro tiskárny STAR řady TSP400. (patro.cz)

The digital direct input/output interfaces are supplied with flat cable connectors to facilitate connection. They are available in tension clamp or clamping yoke connection, with elements such as fuses, disconnectors or LEDs. RS 16 IO 2W I-L H S (conrad.cz)