Adapter, micro-interface, iec 60603/din41612 plug-in connectors, screw connection weidmüller mi8a-i/o s subd15b 8800220000 10 ks

The MICROINTERFACE MI8A-I/O S-SUBD15B analogue adapter is mounted to the connection terminals of the MICROSERIES analogue signal converter. It offers the option to transmit the signals from 8 analogue converters and two MI-A-PSM24 VDC power-feed modules via pre-assembled cables directly to the controller. Thus, the byte-wise block structure of the MICROSERIES MAS analogue signal converters can be set up with only 60 mm of width. Power is supplied via the signal line and can be optionally cross-connected using ZQV 4/N bridges. (conrad.cz)

The line of RS RJ45 interfaces provides a convenient, simple alternative for connecting modems, routers, PCs or other communications equipment with existing components within the electrical cabinet. They can be used to adapt the shielded, 8-pole RJ-45 contact inserts to a screw connection or two data cables. The modules can be attached to standard, TS32 or TS35 mounting rails. (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F10 LP3R 3/12 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F10 LPK 2H/12 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD15S LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD25S LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD3 7S LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD50S LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD9S LP3R (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks RS F40 LP2N 5/40 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks RS F64 LP2N 5/64 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F14 LP3R 3/14 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. LP3R 3/18 RS F16 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F20 LP3R 3/21 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F26 LP3R 3/27 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F64 LP3R 3/66 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F40 LP3R 3/42 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F60 LPK 2H/62 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F16 LPK 2H/18 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F14 LPK 2H/16 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F34 LP3R 3/36 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F50, LP3R 3/51 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Longer attachment hooks Pin for the earth connection. RS F60 LP3R 3/63 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F64 LPK 2H/66 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F26 LPK 2H/28 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F40 LPK 2H/42 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F34 LPK 2H/36 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F20 LPK 2H/22 (conrad.cz)

Passive interfaces for signal transmission on a flat-cable connector equipped with a clamping-yoke connection in accordance with IEC 603-1 / DIN 41651. The main features include: Group with 10- to 64-pole connectors One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Longer attachment hooks Pin for the earth connection. RS F50 LPK 2H/52 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD15S UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD9S UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD25S UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD3 7S UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD9B LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD15B LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD25B LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD37B LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Very compact triple-level modules can be attached to conventional TS35 or TS32 mounting rails. Pin on SubD for the earth connection. RS SD50B LP3R (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules for attachment to standard TS35 or TS32 rail. RS SD9S UNC 4.40 LP2N (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules for attachment to standard TS35 or TS32 rail. RS SD50S UNC 4.40 LP2N (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules for attachment to standard TS35 or TS32 rail. RS SD25S UNC 4.40 LP2N (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules for attachment to standard TS35 or TS32 rail. RS SD15S UNC 4.40 LP2N (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules for attachment to standard TS35 or TS32 rail. RS SD3 7S UNC 4.40 LP2N (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD50S UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD15B UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD9B UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD25B UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules in RS 45 section for installation on standard TS35 mounting rail. Pin for the earth connection. RS SD37B UNC LPK2 (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules for attachment to standard TS35 or TS32 rail. RS SD9B UNC 4.40 LP2N (conrad.cz)

Passive interfaces for signal transmission on a SubD connector equipped with a clamping-yoke connection in accordance with IEC 807-2 / DIN 41652. The main features include: Group with 9-, 15-, 37- and 50-pole male and female connectors. One-to-one electrical connection between controller and field connections. Extremely compact modules for attachment to standard TS35 or TS32 rail. RS SD50B UNC 4.40 LP2N (conrad.cz)