honeywell ct37 pb std protective boot

Protective Boot, compatible with universal docks, color: black, fits for: CT37

Objev podobné jako Honeywell CT37-PB-STD Protective Boot

Protective Boot, Grey, fits for: CT37

Objev podobné jako Honeywell CT37-PB-GRY Protective Boot, Grey

Protective Boot, fits for: CT32

Objev podobné jako Honeywell CT32-PB-STD Protective Boot

Protective boot, fits for: CT40XP.

Objev podobné jako Honeywell CT40-PB-XP protective boot

Protective Boot, fits for: CT47

Objev podobné jako Honeywell CT47-PB-1 Protective Boot

Protective Boot, extra protection of the side keys, fits for: CT45

Objev podobné jako Honeywell CT45-PB-XP Protective Boot

Rubber boot, fits for: CT30 XP.

Objev podobné jako Honeywell CT30P-PB-XP, rubber boot

Protective rubber boot, fits for: CK67

Objev podobné jako Honeywell CK67-PB-1 rubber boot

Honeywell CT37 – Scan Handle, Booted Skenovací rukojeť určená pro zařízení Honeywell CT37 s nasazeným ochranným krytem. Umožňuje pohodlné snímání čárových kódů při delší práci. Kompatibilní pouze s booted verzemi zařízení a příslušenství. Není určeno pro zdravotnické modely CT37-Hx. *Kompatibilita: Honeywell CT37 (s ochranným krytem) *Provedení: booted *Nekompatibilita: nelze použít s modely CT37-Hx (Healthcare)

Objev podobné jako CT37 - scan handle with protective boot

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (key-locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub-Anschluss

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11U: Compatible with OEM hand strap Easy insertion and removal With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot

Carrying Clip, Black, fits for: CT37 (WLAN configurations CT37-X0N-xxxxxDx)

Objev podobné jako Honeywell CT37-CLIP-LAN-STD Carrying Clip, Black

Spare Battery, standard, disinfectant ready, 3846mAh, color: white, fits for: CT37 (CT37-XXX-XXXXXWX und CT37-XXX-XXXXXHX)

Objev podobné jako Honeywell CT37-BTSC-002 Spare Battery, Standard

Carrying Clip, White, Healthcare, fits for: CT37-HC (WLAN-Configurations CT37-X0N-xxxxxHx and CT37-X0N-xxxxxWx)

Objev podobné jako Honeywell CT37-CLIP-LAN-HC Carrying Clip, White

Standard, rechargeable battery, CT37 DRH, disinfectant-capable battery pack, 3846mAh

Objev podobné jako Honeywell CT37-BTSC-001 Standard, Battery, CT37 DRH

Spare Battery, Disinfectant ready, 5500mAh, fits for: CT37 (CT37-XXX-XXXXXDX)

Objev podobné jako Honeywell CT37-BTEC-001 Spare Battery, Disinfectant ready

Protective boot, fits for: TC20/TC25 (not for TC20k, power pack)

Objev podobné jako Zebra SG-TC2X-BOOT-01, protective boot

Protective Boot, incl.: Hand Strap, fits for: TC21, TC26

Objev podobné jako Zebra SG-TC2Y-BOOT-01, Protective Boot

Charging-/communication station, USB, incl.: power supply, order separately: power cord, fits for:CT37

Objev podobné jako Honeywell CT37-HB-UVB-2 charging-/communication station, USB

Scan Handle, compatible without protective boot, fits for: CT37

Objev podobné jako Honeywell CT37-SH-UVN Scan Handle

portable data collection device, screen size: 15.2 cm (6''), Projected Capacitive, multi touch, resolution: 2280x1080 Pixel, micro SD-Slot, desinfectable housing, speaker, Camera (13 MP), front camera (8 MP), hot swappable, Push to talk, brightness 600cd, connection: USB-C, Bluetooth (BLE), Wi-Fi 6E, 5G, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.4 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Device Client Pack, (1 year), Google Mobile Services, battery, 3846 mAh, hand-strap, order separately: power supply unit, interface cable, IP65, IP68, MIL-STD 810H, colour: black

Objev podobné jako Honeywell CT37 CT37-X1N-50S10DG, Projected Capacitive, hot-swap, PTT, USB-C, BT (BLE), 5G, NFC, Android, GMS, black

portable data collection device, healthcare, 2D, imager (standard range, S0703), screen size: 15.2 cm (6''), Projected Capacitive, multi touch, resolution: 2280x1080 Pixel, micro SD-Slot, desinfectable housing, speaker, Camera (13 MP), front camera (8 MP), hot swappable, Push to talk, brightness 600cd, connection: USB-C, Bluetooth (BLE), Wi-Fi 6E, 5G, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.4 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Device Client Pack, (1 year), Google Mobile Services, battery, 3846 mAh, hand-strap, order separately: power supply unit, interface cable, IP65, IP68, MIL-STD 810H, colour: white

Objev podobné jako Honeywell CT37 CT37-X1N-57S10WG, 2D, SR, Projected Capacitive, hot-swap, PTT, USB-C, BT (BLE), 5G, NFC, Android, GMS, white

portable data collection device, healthcare, 2D, imager (high density, S0703), screen size: 15.2 cm (6''), Projected Capacitive, multi touch, resolution: 2280x1080 Pixel, micro SD-Slot, desinfectable housing, speaker, Camera (13 MP), front camera (8 MP), hot swappable, Push to talk, brightness 600cd, connection: USB-C, Bluetooth (BLE), Wi-Fi 6E, 5G, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.4 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Device Client Pack, (1 year), Google Mobile Services, battery, 3846 mAh, hand-strap, order separately: power supply unit, interface cable, IP65, IP68, MIL-STD 810H, colour: white

Objev podobné jako Honeywell CT37 CT37-X1N-56S10HG, 2D, HD, Projected Capacitive, hot-swap, PTT, USB-C, BT (BLE), 5G, NFC, Android, GMS, white

portable data collection device, 2D, imager (standard range, S0703), screen size: 15.2 cm (6''), Projected Capacitive, multi touch, resolution: 2280x1080 Pixel, micro SD-Slot, desinfectable housing, speaker, Camera (13 MP), front camera (8 MP), hot swappable, Push to talk, brightness 600cd, connection: USB-C, Bluetooth (BLE), Wi-Fi 6E, 5G, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.4 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Device Client Pack, (1 year), Google Mobile Services, battery, 3846 mAh, hand-strap, order separately: power supply unit, interface cable, IP65, IP68, MIL-STD 810H, colour: black

Objev podobné jako Honeywell CT37 CT37-X1N-57S10DG, 2D, SR, Projected Capacitive, hot-swap, PTT, USB-C, BT (BLE), 5G, NFC, Android, GMS, black

portable data collection device, 2D, imager (standard range, S0703), screen size: 15.2 cm (6''), Projected Capacitive, multi touch, resolution: 2280x1080 Pixel, micro SD-Slot, desinfectable housing, speaker, Camera (13 MP), front camera (8 MP), hot swappable, Push to talk, brightness 600cd, connection: USB-C, Bluetooth (BLE), Wi-Fi 6E, 5G, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.4 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Device Client Pack, (1 year), Google Mobile Services, battery, extended, hand-strap, order separately: power supply unit, interface cable, IP65, IP68, MIL-STD 810H, colour: black

Objev podobné jako Honeywell CT37 CT37-X1N-57E10DG, 2D, SR, Projected Capacitive, hot-swap, PTT, USB-C, BT (BLE), 5G, NFC, Android, GMS, ext. bat., black

Spare Armband, pack of 3, fits for: CT37

Objev podobné jako Honeywell CT37-WS-KIT-01 Spare Armband

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37 (non-booted)

Objev podobné jako Honeywell CT37-5CB-UVN-BAT-0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37-HC (non-booted)

Objev podobné jako Honeywell CT37-5CB-UVN-HC0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37-HC (booted)

Objev podobné jako Honeywell CT37-5CB-UVB-HC0 5-Slot Charging Cradle

5-Slot Charging Cradle, charge up to 4 devices and 4 batteries, order separately: power cord, fits for: CT37 (booted)

Objev podobné jako Honeywell CT37-5CB-UVB-BAT-0 5-Slot Charging Cradle

Ethernet Home Base, incl. power supply and power cord (EU), fits for: CT37 (non-booted)

Objev podobné jako Honeywell CT37-EB-UVN-2 Ethernet Home Base, EU

Ethernet Home Base, incl. power supply and power cord (UK), fits for: CT37 (non-booted)

Objev podobné jako Honeywell CT37-EB-UVN-3 Ethernet Home Base, UK

Scan Handle, booted, fits for: CT37

Objev podobné jako Honeywell CT37-SH-UVB Scan Handle, booted

Spare Rubber Pad, pack of 2, fits for: CT37

Objev podobné jako Honeywell CT37-WS-KIT-02 Spare Rubber Pad

Wearable Kit, includes Armband, Rubber Pad and Sled, fits for: CT37 (non-booted)

Objev podobné jako Honeywell CT37-WS-KIT Wearable Kit

Spare Sled, box of 2, fits for: CT37

Objev podobné jako Honeywell CT37-WS-KIT-03 Spare Sled

Hand Strap, Grey, Healthcare, pack of 3, fits for: CT37-HC

Objev podobné jako Honeywell CT37-HS-HC-3PK Hand Strap, Grey

portable data collection device, 2D, imager (standard range, S0703), screen size: 15.2 cm (6''), Projected Capacitive, multi touch, resolution: 2280x1080 Pixel, micro SD-Slot, desinfectable housing, speaker, Camera (13 MP), front camera (8 MP), hot swappable, Push to talk, brightness 600cd, connection: USB-C, Bluetooth (BLE), Wi-Fi 6E, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.4 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Device Client Pack, (1 year), Google Mobile Services, battery, extended, 5300 mAh, hand-strap, order separately: power supply unit, interface cable, IP65, IP68, MIL-STD 810H, colour: black

Objev podobné jako Honeywell CT37 CT37-X0N-57E10DG, 2D, SR, Projected Capacitive, hot-swap, PTT, USB-C, BT (BLE), Wi-Fi, NFC, Android, GMS, ext. bat., black

Homebase Kit, incl.: Power Supply, Power Cord (EU) and cups, charges up to one device and one spare battery (standard or extended), USB-B port, fits for: CT37

Objev podobné jako Honeywell CT37-HB-UVN-2 Homebase Kit, EU

Screen Protector, fits for: CT37

Objev podobné jako Honeywell CT37-SP-1PK Screen Protector

4-Slot Battery Charger, incl.: Power Supply, order separately: Power Cord, fits for: CT30 XP, CT37

Objev podobné jako Honeywell CT37-QBC-0 4-Slot Battery Charger

Protective boot, fits for: EC50, EC55.

Objev podobné jako Zebra SG-EC5X-BOOT1-01 protective boot

Protective boot, fits for: RK25, RK26

Objev podobné jako Cipherlab protective boot