ct37 scan handle with protective boot

Honeywell CT37 – Scan Handle, Booted Skenovací rukojeť určená pro zařízení Honeywell CT37 s nasazeným ochranným krytem. Umožňuje pohodlné snímání čárových kódů při delší práci. Kompatibilní pouze s booted verzemi zařízení a příslušenství. Není určeno pro zdravotnické modely CT37-Hx. *Kompatibilita: Honeywell CT37 (s ochranným krytem) *Provedení: booted *Nekompatibilita: nelze použít s modely CT37-Hx (Healthcare)

Objev podobné jako CT37 - scan handle with protective boot

Brodit passive mount, tilt swivel, Brodit passive mount, fits for: Datalogic Memor 30, 35 with protective-Boot

Objev podobné jako Brodit passive mount, Datalogic Memor 30, 35 with protective-Boot

Trigger Handle, requires Protective Boot, fits for: TC22, TC27

Objev podobné jako Zebra TRG-TC2L-SNP1-01 Trigger Handle

Trigger Handle, requires Protective Boot, fits for: TC22, TC27

Objev podobné jako Zebra TRG-TC2L-SNP1-01 Trigger Handle

Active holder with cigarette lighter plug (pogo pin charging) fits for: CT30XP, CT37 with Protective Boot (CT30P-PB-XP)

Objev podobné jako Active bracket with cigarette lighter

Scan Handle, compatible without protective boot, fits for: CT37

Objev podobné jako Honeywell CT37-SH-UVN Scan Handle

Scan Handle, booted, fits for: CT37

Objev podobné jako Honeywell CT37-SH-UVB Scan Handle, booted

Protective Boot, compatible with universal docks, color: black, fits for: CT37

Objev podobné jako Honeywell CT37-PB-STD Protective Boot

Protective Boot, Grey, fits for: CT37

Objev podobné jako Honeywell CT37-PB-GRY Protective Boot, Grey

Non-booted Scan Handle, compatible with CT32 without protective boot

Objev podobné jako Honeywell CT32, Scan Handle without boot

Honeywell CK67 – Scan Handle Ergonomická rukojeť se spouští pro skenování určená pro zařízení Honeywell CK67. Umožňuje pohodlnější a rychlejší práci při častém snímání čárových kódů. • Kompatibilita: Honeywell CK67 • Provedení: nasazovací rukojeť pro skenování • Typ: příslušenství – scan handle

Objev podobné jako CK67 SCAN HANDLE

Holster CK65/CK3R/CK3X with Scan Handle. Pouzdro s opaskem, podporuje CK65, CK3R a CK3X se skenovací rukojetí.

Objev podobné jako Holster, CK65/CK3R/CK3X w/Scan Handle

Scan handle, snap-on, fits for: CN80

Objev podobné jako Honeywell CN80-SH-DC, scan handle

Scan handle, fits for: CT45/XP (with protective case).

Objev podobné jako Honeywell CT45-SH-UVB, scan handle

Scan handle, fits for: CT45/XP (without protective case).

Objev podobné jako Honeywell CT45-SH-UVN, scan handle

Scan handle, fits for: for CT60 XP DR, it is not compatible with previous releases of the CT60, it allows the device to bedocked and charged while mounted.

Objev podobné jako Honeywell CT60-XP-SCH-DR, scan handle

Scan Handle, fits for: CK62

Objev podobné jako Honeywell CK62-SH Scan Handle

CT70 booted scan handle; Compatible with CT70 (w/ standard and extended battery) with protective bootorder separately: Protective boot

Objev podobné jako Scan Handle, for CT70 booted

Scan Handle for CT70, compatible with CT70 (with standard battery or extended battery) without protective boot

Objev podobné jako Scan Handle, for CT70 non booted

Protective boot, fits for: TC20/TC25 (not for TC20k, power pack)

Objev podobné jako Zebra SG-TC2X-BOOT-01, protective boot

Protective Boot, incl.: Hand Strap, fits for: TC21, TC26

Objev podobné jako Zebra SG-TC2Y-BOOT-01, Protective Boot

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, tmavě modrá, velikost 27/28

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, žlutá, velikost 33/34

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, růžová, velikost 33/34

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, růžová, velikost 28/29

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, zelená, velikost 25/26

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, tmavě modrá, velikost 32/33

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, zelená, velikost 28/29

Protective boot, fits for: CT40XP.

Objev podobné jako Honeywell CT40-PB-XP protective boot

Protective boot, fits for: EC50, EC55.

Objev podobné jako Zebra SG-EC5X-BOOT1-01 protective boot

Protective Boot, fits for: CT47

Objev podobné jako Honeywell CT47-PB-1 Protective Boot

Protective Boot, extra protection of the side keys, fits for: CT45

Objev podobné jako Honeywell CT45-PB-XP Protective Boot

Protective boot, fits for: RK25, RK26

Objev podobné jako Cipherlab protective boot

Protective Boot, fits for: Memor 30/35

Objev podobné jako Datalogic 94ACC0374 Protective Boot

Protective Boot, fits for: Memor 12/17

Objev podobné jako Datalogic 94ACC0404 Protective Boot

Protective Boot, fits for: CT32

Objev podobné jako Honeywell CT32-PB-STD Protective Boot

Datalogic protective boot fits for: Memor K20-K25

Objev podobné jako Datalogic Protective Boot

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 & DB9 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2-DB9KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (key-locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub-Anschluss

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PDU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 & DB9 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2-DB9U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PDKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11U: Compatible with OEM hand strap Easy insertion and removal With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot

Protective Boot, fits for: TC501

Objev podobné jako Zebra Protective Boot

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, růžová, velikost 29/30

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, růžová, velikost 32/33

Z bláta rovnou do louže. Díky modelu Crocs HANDLE IT RAIN BOOT KIDS to naštěstí není neštěstí a rodiče malých nezbedů mohou s klidem pozorovat dovádění v odlehčených holínkách Crocs.

Objev podobné jako Crocs HANDLE IT RAIN BOOT KIDS Dětské holínky, žlutá, velikost 32/33