honeywell ct32 pb std protective boot

Protective Boot, fits for: CT32

Objev podobné jako Honeywell CT32-PB-STD Protective Boot

Protective Boot, compatible with universal docks, color: black, fits for: CT37

Objev podobné jako Honeywell CT37-PB-STD Protective Boot

Protective boot, fits for: CT40XP.

Objev podobné jako Honeywell CT40-PB-XP protective boot

Protective Boot, fits for: CT47

Objev podobné jako Honeywell CT47-PB-1 Protective Boot

Protective Boot, extra protection of the side keys, fits for: CT45

Objev podobné jako Honeywell CT45-PB-XP Protective Boot

Protective Boot, Grey, fits for: CT37

Objev podobné jako Honeywell CT37-PB-GRY Protective Boot, Grey

Non-booted Scan Handle, compatible with CT32 without protective boot

Objev podobné jako Honeywell CT32, Scan Handle without boot

Rubber boot, fits for: CT30 XP.

Objev podobné jako Honeywell CT30P-PB-XP, rubber boot

Protective rubber boot, fits for: CK67

Objev podobné jako Honeywell CK67-PB-1 rubber boot

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (key-locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub-Anschluss

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11U: Compatible with OEM hand strap Easy insertion and removal With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot

Protective boot, fits for: TC20/TC25 (not for TC20k, power pack)

Objev podobné jako Zebra SG-TC2X-BOOT-01, protective boot

Protective Boot, incl.: Hand Strap, fits for: TC21, TC26

Objev podobné jako Zebra SG-TC2Y-BOOT-01, Protective Boot

Screen Protector, box of 10, fits for: CT32

Objev podobné jako Honeywell CT32-SP-10PK Screen Protector

Single Cradle Charger, incl.: USB-C cable, order separately: Power Supply, compatible with scan handle, fits for: CT32 (non-booted)

Objev podobné jako Honeywell CT32-SC-UVN-0 Single Cradle Charger

Protective boot, fits for: EC50, EC55.

Objev podobné jako Zebra SG-EC5X-BOOT1-01 protective boot

Protective boot, fits for: RK25, RK26

Objev podobné jako Cipherlab protective boot

Protective Boot, fits for: Memor 30/35

Objev podobné jako Datalogic 94ACC0374 Protective Boot

Protective Boot, fits for: Memor 12/17

Objev podobné jako Datalogic 94ACC0404 Protective Boot

Datalogic protective boot fits for: Memor K20-K25

Objev podobné jako Datalogic Protective Boot

Brodit passive mount, tilt swivel, Brodit passive mount, fits for: Datalogic Memor 30, 35 with protective-Boot

Objev podobné jako Brodit passive mount, Datalogic Memor 30, 35 with protective-Boot

Protective Boot, fits for: TC501

Objev podobné jako Zebra Protective Boot

Protection boot, compatible with and without handle, colour: charcoal, for Honeywell CK7X

Objev podobné jako Honeywell 203-961-001, protection boot

Honeywell CT32 - 6/128GB, Standard range, Nano & ESim EAN: CT32-X1N-37S1FBG Obecný popis Honeywell CT32 je zařízení pro retail, dopravu a logistiku. Podporuje 5G a Wi-Fi 6E, má vysokou odolnost IP65/IP68 a dlouhou životnost. Skenovací modul Standard Range a výdrž 12+ hodin zajišťují efektivní provoz. Parametry Rozměry: 166 × 76.9 × 13.9 mm Hmotnost: 269g se standardní baterií Barva: černá Systém: Android 14 aktualizovatelný až na Android 18 Procesor: osmijádrový procesor Qualcomm 4490, až 2,4GHz Paměť: 6/8GB RAM, 128GB Flash (v závislosti na variantě) Displej: 6\\\" FULL HD (2160x1080), Corning Gorilla Glas 5, LED 450 nitů Kamery: 13mpx zadní, 8mpx přední Baterie: Li-Ion 4500 mAh standardní Vlastnosti baterie: inteligentní baterie s integrovanými diagnostickými nástroji, méně než 3.5 hodiny k úplnému nabití, výdrž 12+ hodin (liší se podle případu použití) Rozšíření úložiště: karta microSD až 2 TB Skenovací moduly: Honeywell FlexRange S0803 (extended range), Honeywell S0703 (standard range) (v závislosti na variantě) Senzory: Světelný senzor, senzor přiblížení, akcelerometr, gyroskop, magnetometr Okolní prostředí Provozní teplota: –20°C – 50°C Skladovací teplota: –30°C – 70°C Vlhkost: 5 až 95 % nekondenzující Odolnost: MIL–STD–810H – 1.8m s krytem / 1.5m bez krytu při provozní teplotě Krytí: IP65 a IP68 Elektrostatický výboj: ±8 kV Contact, ±15 ... Unknown localization key: "more"

Objev podobné jako CT32 - 6/128GB, Standard range, Nano & ESim

Honeywell CT32 - 8/128GB, Flex Range, Nano & ESim Honeywell CT32 je ideálním zařízením pro retail, dopravu a logistiku. Nabízí podporu 5G a Wi-Fi 6E, vysokou odolnost IP65/IP68 a dlouhou životnost. Skenovací modul Standard Range a výdrž 12+ hodin zajišťují efektivní provoz. Parametry *Rozměry dך×h [mm]: 166 × 76.9 × 13.9 *Hmotnost: 269g se standardní baterií *Barva: černá *Systém: Android 14 aktualizovatelný až na Android 18 *Procesor: osmijádrový procesor Qualcomm 4490, až 2,4GHz *Paměť: 6/8GB RAM, 128GB Flash (v závislosti na variantě) *Displej: 6" FULL HD (2160x1080), Corning Gorilla Glas 5, LED 450 nitů *Kamery: 13mpx zadní, 8mpx přední *Baterie: Li-Ion 4500 mAh standardní *Vlastnosti baterie: inteligentní baterie s integrovanými diagnostickými nástroji, méně než 3.5 hodiny k úplnému nabití, výdrž 12+ hodin (liší se podle případu použití) *Rozšíření úložiště: karta microSD až 2 TB *Skenovací moduly: Honeywell FlexRange S0803 (extended range), Honeywell S0703 (standard range) (v závislosti na variantě) *Senzory: Světelný senzor, senzor přiblížení, akcelerometr, gyroskop, magnetometr Okolní prostředí *Provozní teplota: –20°C – 50°C *Skladovací teplota: –30°C – 70°C *Vlhkost: 5 až 95 % nekondenzující *Odolnost: MIL–STD–810H – 1.8m s krytem / 1.5m bez krytu při provozní teplotě *Krytí: IP65 a IP68 *Elektrostatický výboj: ±8 kV Contact, ±15 kV Air ... Unknown localization key: "more"

Objev podobné jako CT32 - 8/128GB, Flex Range, Nano & ESim

Protective case, fits for: SPP-R210

Objev podobné jako Bixolon PPC-R210/STD, protective case

Protective case, fits for: SPP-R310

Objev podobné jako Bixolon PPC-R310/STD, protective case

protective case, fits for: EDA52.

Objev podobné jako Honeywell EDA52-RB-0, protective case

Rubber boot, fits for: CN80 (Standard range)

Objev podobné jako Honeywell CN80-RB-00, rubber boot

Rubber boot, fits for: CN80 (Extended range)

Objev podobné jako Honeywell CN80-RB-01, rubber boot

Rubber boot, fits for: CN80 (Standard range, scan handle)

Objev podobné jako Honeywell CN80-RB-SHC, rubber boot

Rubber boot, fits for: CN80 (Extended range, scan handle)

Objev podobné jako Honeywell CN80-RB-SHC1, rubber boot

Rubber boot, fits for: CT40

Objev podobné jako Honeywell CT40-RB-00, rubber boot

TPU rubber boot, fits for: EDA51.

Objev podobné jako Honeywell 50141376-001 TPU rubber boot

Protective Rubber Boot, fits for: CK65 with 6703 scan engine.

Objev podobné jako Honeywell 213-064-001 rubber boot

Protective rubber boot, fits for: CK65 Computers with EX20 engine.

Objev podobné jako Honeywell 213-063-001 rubber boot

Rubber boot, fits for: EDA10A

Objev podobné jako Honeywell EDA10A-RB-0 rubber boot

Honeywell CT32 - 8/128GB, Standard range, Nano & ESim Optimální zařízení pro retail, dopravu a logistiku. Podporuje 5G a Wi-Fi 6E. Odolnost IP65/IP68 a dlouhá životnost. Skenovací modul Standard Range. Výdrž 12+ hodin pro efektivní provoz. Parametry Rozměry: 166 × 76.9 × 13.9 mm. Hmotnost: 269g se standardní baterií. Barva: černá. Systém: Android 14, aktualizovatelný až na Android 18. Procesor: osmijádrový Qualcomm 4490, až 2,4GHz. Paměť: 6/8GB RAM, 128GB Flash. Displej: 6\" FULL HD (2160x1080), Corning Gorilla Glas 5, LED 450 nitů. Kamery: 13mpx zadní, 8mpx přední. Baterie: Li-Ion 4500 mAh standardní. Vlastnosti baterie: inteligentní s integrovanými diagnostickými nástroji. Úplné nabití za méně než 3.5 hodiny. Výdrž 12+ hodin (liší se podle případu použití). Rozšíření úložiště: karta microSD až 2 TB. Skenovací moduly: Honeywell FlexRange S0803, Honeywell S0703. Senzory: Světelný, senzor přiblížení, akcelerometr, gyroskop, magnetometr. Okolní prostředí Provozní teplota: –20°C – 50°C. Skladovací teplota: –30°C – 70°C. Vlhkost: 5 až 95 % nekondenzující. Odolnost: MIL–STD–810H – 1.8m s krytem / 1.5m bez krytu. Krytí: IP65 a IP68. Elektrostatický výboj: ±8 kV Contact, ±15 kV Air. Bezdrátové připojení WWAN: 4G, 5G – 1× eSIM, 1× nano SIM. WLAN: IEEE 802.11 a/b/g/n/ac/ax (2.4GHz, 5GHz, 6GHz3, 2X2 MU–MIMO, DBS supported, IPv4, IPv6; 802.11 ... Unknown localization key: "more"

Objev podobné jako CT32 - 8/128GB, Standard range, Nano & ESim

Honeywell CT37 – Scan Handle, Booted Skenovací rukojeť určená pro zařízení Honeywell CT37 s nasazeným ochranným krytem. Umožňuje pohodlné snímání čárových kódů při delší práci. Kompatibilní pouze s booted verzemi zařízení a příslušenství. Není určeno pro zdravotnické modely CT37-Hx. *Kompatibilita: Honeywell CT37 (s ochranným krytem) *Provedení: booted *Nekompatibilita: nelze použít s modely CT37-Hx (Healthcare)

Objev podobné jako CT37 - scan handle with protective boot

Wearable set, integrated ring scanner, fits for: CT40 with protective boot, order separately: CT40, protective boot, arm band.

Objev podobné jako Honeywell CT40-WS-PB wearable set

Univerzální nabíječka pro akumulátory 4–120 Ah automaticky rozpozná napětí 6V nebo 12V. Po nabití přechází do udržovacího režimu s pulzním nabíjením. Nabíjí všechny typy olověných akumulátorů včetně GEL a AGM s proudem 1A a krytím IP65.

• Automaticky rozpozná 6V nebo 12V akumulátor a přepne do udržovacího režimu po nabití.
• Nabíjí všechny typy olověných akumulátorů včetně GEL, AGM, MF, VRLA, PbWet a PbCa.
• Pulzní dobíjení prodlužuje životnost baterie a udržuje ji v optimální kondici.
• Kompaktní velikost a krytí IP65 umožňují použití v různých podmínkách (doma, na cestě, v garáži).

Objev podobné jako Compass Nabíječka mikroprocesor 1Amp 6/12V PB/GEL max. 120Ah

CT70 protective boot, gray

Objev podobné jako Rubber Boot for CT70, standard

Charging station, 4 slots, incl.: power supply, order separately: power cord, fits for: CT40 (protective boot).

Objev podobné jako Honeywell CT40-CB-UVB-0 charging station, 4 slots