Držák zásuvných karet weidmüller 0690660000, (d x š x v) 69 x 131 x 144 mm, skh e48 lp2/lp, 1 ks

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Rukojeť Mentor 268.1, (d x š x v) 69 x 12.2 x 40 mm, hliník, 1 ks od výrobce Mentor v kategorii Nábytkové úchytky, madla za skvělou cenu u Conrada. (conrad.cz)

Bateriový držák na 4x AA Velleman BH341BS, (d x š x v) 69 x 65 x 19 mm od výrobce Velleman v kategorii Držák baterií za skvělou cenu u Conrada. (conrad.cz)

Plast odolný proti kyselinám·Vyšší teplotní rozsah (conrad.cz)

L=pájecí vývod, D=kontakt Plast odolný proti kyselinám·Lehký a odolný (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Prázdné pouzdro Axxatronic CBCSC3GY-CON CBCSC3GY-CON, (d x š x v) 150 x 69 x 54 mm, šedá, 1 ks od výrobce Axxatronic v kategorii Příslušenství pro spínače, nouzové vypínače, tlačítka s osvětlením a kont. prvky za skvělou cenu u Conrada. (conrad.cz)

Šroubové svorky jsou na zadní straně rozvaděče. Pouzdro se pak pomocí integrovaného šroubu pevně přitlačí na stěnu rozvaděče. 1x pouzdro, 1x hliníková ochranná destička, 2x šroubovací svorky (conrad.cz)

Prázdné pouzdro Axxatronic CBCSC2YW-CON CBCSC2YW-CON, (d x š x v) 105 x 69 x 54 mm, šedá, žlutá, 1 ks od výrobce Axxatronic v kategorii Příslušenství pro spínače, nouzové vypínače, tlačítka s osvětlením a kont. prvky za skvělou cenu u Conrada. (conrad.cz)

Držák nářadí Gedore 1879219, (d x š x v) 95 x 300 x 11 mm, 1 ks od výrobce Gedore v kategorii Perforované panely za skvělou cenu u Conrada. (conrad.cz)

Držák nářadí Gedore 2008696, (d x š x v) 145 x 124 x 66 mm, 1 ks od výrobce Gedore v kategorii Perforované panely za skvělou cenu u Conrada. (conrad.cz)

Držák nářadí Gedore 1920626, (d x š x v) 60 x 147 x 227 mm, 1 ks od výrobce Gedore v kategorii Perforované panely za skvělou cenu u Conrada. (conrad.cz)

Držák nářadí Gedore 2008645, (d x š x v) 37 x 200 x 60 mm, 1 ks od výrobce Gedore v kategorii Perforované panely za skvělou cenu u Conrada. (conrad.cz)

Držák trubek Gedore 2008629, (d x š x v) 74 x 58 x 67 mm, 1 ks od výrobce Gedore v kategorii Perforované panely za skvělou cenu u Conrada. (conrad.cz)

Jednoduše nastavitelný držák DPS. Nastavitelný úhel podle velikosti DPS. Snadno nastavitelný·Nastavitelný úhel·Rozpětí 220 mm (conrad.cz)

Tloušťka stěn 3,1 mm (conrad.cz)

Tloušťka stěn 3,1 mm (conrad.cz)

Montážní deska Spelsberg TG MPI-1608, (d x š x v) 131 x 73 x 2,5 mm od výrobce Spelsberg v kategorii Montážní deska za skvělou cenu u Conrada. (conrad.cz)

Montážní deska Spelsberg TG MPI-1612, (d x š x v) 131 x 113 x 2,5 mm od výrobce Spelsberg v kategorii Montážní deska za skvělou cenu u Conrada. (conrad.cz)

Zaoblené rohy pro pohodlné uchopení a lehce sestavitelné díky zacvakávacímu mechanismu. (conrad.cz)

Zaoblené rohy pro pohodlné uchopení a lehce sestavitelné díky zacvakávacímu mechanismu. (conrad.cz)

Rychlá a jednoduchá montáž příslušenství. Vč. upevňovacího materiálu. (conrad.cz)

Držák zásuvných karet Weidmüller 0106161001, (d x š x v) 56 x 148 x 166 mm, SKH D32 LP 5/16, 1 ks od výrobce Weidmüller v kategorii Držáky a osazovací rámy DPS za skvělou cenu u Conrada. (conrad.cz)

Držák zásuvných karet Weidmüller 0107661001, (d x š x v) 74 x 148 x 168 mm, SKH D32 LP 5/16, 1 ks od výrobce Weidmüller v kategorii Držáky a osazovací rámy DPS za skvělou cenu u Conrada. (conrad.cz)

Držák nářadí 1553636, (d x š x v) 83 x 12 x 9 mm, ocel, Nylon®, 1 ks od výrobce No Name PL v kategorii Perforované panely za skvělou cenu u Conrada. (conrad.cz)

Sada 4 ks Desky by měly být přiletovány na zástrčky a zásuvky, pokud jsou zasunuty. 4ks (conrad.cz)

Parapetní lišta distanční držák (d x š x v) 30 x 12 x 10 mm Schneider Electric INS12910 1 ks zelená od výrobce Schneider Electric v kategorii Zásuvkové a kabelové lišty za skvělou cenu u Conrada. (conrad.cz)

Kufřík na nářadí VISO WAT140, (d x š x v) 239 x 144 x 70 mm od výrobce VISO v kategorii Kufry na nářadí za skvělou cenu u Conrada. (conrad.cz)

Pouzdro s našroubovatelným těsněním víka a neztratitelnými šrouby Vhodné také pro montáž na stěnu. Dodávka bez svorkového bloku. (conrad.cz)

TG lišta Spelsberg NS 35/146mm, (d x š x v) 144 x 35 x 7,5 mm od výrobce Spelsberg v kategorii DIN lišty, montážní lišty za skvělou cenu u Conrada. (conrad.cz)

2x držák serva (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Držák zásuvných karet Weidmüller 0550160000, (d x š x v) 60 x 138 x 160 mm, SKH SAEULE PBTP20GV OR, 10 ks od výrobce Weidmüller v kategorii Držáky a osazovací rámy DPS za skvělou cenu u Conrada. (conrad.cz)

Po nalepení na plechy karoserie působí jako zvuková izolace. Zvukotěsná·Ohnivzdorná·Jednostranně samolepicí Optimální účinek pomocí navrstvení asfaltové rohože na jednu vrstvu protihlukového obložení obj.č.: 84 11 29. (conrad.cz)

Servotester (conrad.cz)

Rukojeť Cliff CP3016, (d x š x v) 65.7 x 12.4 x 21.4 mm, 1 ks od výrobce Cliff v kategorii Nábytkové úchytky, madla za skvělou cenu u Conrada. (conrad.cz)

Optimální ochrana·Kompaktní a praktický·Ideální na cesty i do domácnosti (conrad.cz)

Držák (d x š x v) 117 x 70 x 20 mm Laser Components od výrobce Laser Components v kategorii Příslušenství pro laserovou techniku za skvělou cenu u Conrada. (conrad.cz)