Držák zásuvných karet weidmüller 0586861001, (d x š x v) 50.8 x 131 x 144 mm, skh f32 (z&b) lp rh2, 1 ks

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

2 držáky 5 cm·2 šrouby·2 hmoždinky (conrad.cz)

Bez zesílení. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)

Univerzální hadřík IWH 072012 1 ks (d x š x v) 50 x 60 x 0.5 cm od výrobce IWH v kategorii Houbičky, kartáče, utěrky za skvělou cenu u Conrada. (conrad.cz)

Držák přístrojů pro lišty na nářadí Berger & Schröter 30118, (d x š x v) 50 x 55 x 40 mm od výrobce Berger & Schröter v kategorii Lišty na nářadí za skvělou cenu u Conrada. (conrad.cz)

Instalační krabička Spelsberg AL 55-3 15000101, (d x š x v) 50 x 45 x 30 mm, hliník, stříbrnošedá, 1 ks od výrobce Spelsberg v kategorii Nástěnné a instalační rozváděče za skvělou cenu u Conrada. (conrad.cz)

Rychlá a jednoduchá montáž příslušenství. Vč. upevňovacího materiálu. (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Univerzální pouzdro ABS Hammond Electronics, (d x š x v) 50 x 50 x 15 mm, modrá od výrobce Hammond Electronics v kategorii Univerzální pouzdro za skvělou cenu u Conrada. (conrad.cz)

Univerzální pouzdro ABS Hammond Electronics, (d x š x v) 50 x 50 x 20 mm, modrá od výrobce Hammond Electronics v kategorii Univerzální pouzdro za skvělou cenu u Conrada. (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Nastavení dobré/špatné nálady·Možné blikající oči Přiložená přední strana z překližky může být libovolně dekorována. Co je potřeba: Páječka, pájecí cín, baterie 9 v Block, boční štípací kleště was a lepidlo na dřevo (conrad.cz)

Malé pouzdro se šroubovacím uzávěrem. (d x š x v) 50 x 38 x 14 mm Pouzdro se šrouby. (conrad.cz)

Univerzální pouzdro ABS Fibox, (d x š x v) 50 x 65 x 45 mm, šedá od výrobce Fibox v kategorii Univerzální pouzdro za skvělou cenu u Conrada. (conrad.cz)

Celokovové provedení zajišťuje výborné EMC stínění. Pouzdro je dodáváno nenalakované a tím pádem jej lze lakovat podle přání. Vrchní a spodní část je sešroubována šrouby, které jsou součástí dodávky. Velmi dobré EMV stínění (conrad.cz)

Celokovové provedení zajišťuje výborné EMC stínění. Pouzdro je dodáváno nenalakované a tím pádem jej lze lakovat podle přání. Vrchní a spodní část je sešroubována šrouby, které jsou součástí dodávky. Velmi dobré EMV stínění (conrad.cz)

Šroubové svorky jsou na zadní straně rozvaděče. Pouzdro se pak pomocí integrovaného šroubu pevně přitlačí na stěnu rozvaděče. 1x pouzdro, 1x hliníková ochranná destička, 2x šroubovací svorky (conrad.cz)

Pasivní chladič SEPA PB50-50-10-169-AL 111111167, (d x š x v) 50 x 50 x 10 mm od výrobce SEPA v kategorii Axiální ventilátory za skvělou cenu u Conrada. (conrad.cz)

Robustní pouzdro z hliníkové tlakové slitiny·K dispozici v přírodní vibra nebo v černém práškovlakování·Nabízí vylepšené EMI/EMC/RFI stínění·(d x š x v) 50 x 50 x 31 mm;IP54 (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Miniaturní plastový plášť vysoké jakosti. Ideálně vhodné pro utěsnění obvodů až na stupeň krytí 54 (ochrana proti škodlivým usazeninám prachu a proti odstřikující vodě). (conrad.cz)

Univerzální pouzdro ABS Hammond Electronics, (d x š x v) 50 x 35 x 15 mm, modrá od výrobce Hammond Electronics v kategorii Univerzální pouzdro za skvělou cenu u Conrada. (conrad.cz)

Univerzální pouzdro ABS Hammond Electronics, (d x š x v) 50 x 35 x 20 mm, modrá od výrobce Hammond Electronics v kategorii Univerzální pouzdro za skvělou cenu u Conrada. (conrad.cz)

Přerušovač blikače pro žárovky s nastavitelným sledem blikání. Ideální pro reklamní tabule, modelové světelné věže, osvětlení na párty atd. Pro žárovky od 25 do 300 W (conrad.cz)

S velkými koly; sklopná rukojeť (conrad.cz)

Univerzální pouzdro hliníkové Hammond Electronics 1590Z060, (d x š x v) 50 x 45 x 30 mm, hliníková od výrobce Hammond Electronics v kategorii Univerzální pouzdro za skvělou cenu u Conrada. (conrad.cz)

Univerzální pouzdro hliníkové Hammond Electronics 1550Z101, (d x š x v) 50 x 45 x 30 mm, přírodní od výrobce Hammond Electronics v kategorii Univerzální pouzdro za skvělou cenu u Conrada. (conrad.cz)

Plug-in card holders are used to adapt cards from the Euro format (19") to connectors in compliance with IEC 603/DIN 41612 and DIN 41617. Plug-in card holders consist of the following components: Circuit board with standard connectors and inserts with clamping-yoke connection. Flange housing and holder/pull-out mechanism for the circuit card. Plug-in card and mounting foot for attaching to mounting rail or directly to panel. The plug-in card holders are normally used in the following cases: For quick adaptation in industrial applications of different 19" modules, and for avoiding the expense of a 19"rack. When there are only a few cards to install and connect. The circuit board is located in a remote position where the cabling cannot be easily handled. An older system needs to be updated with additional electronics modules. For test devices, production processes and laboratories: where circuit boards needs to be swapped out quicklyand connections must be easy to handle. (conrad.cz)