ram mounts rap 400u tough claw retaining clip

RAM Mounts Tough-Claw Retaining Clip (Medium) with Locking Screw - C-Ball (1.5"), Diameter 25.4-40.6mm

Objev podobné jako RAM Mounts RAP-404U Tough-Claw Retaining Clip

RAM Mounts Tough-Claw Retaining Clip (Small) with Locking Screw - C-Ball (1.5"), Diameter 15.9-29.0mm

Objev podobné jako RAM Mounts RAP-400U Tough-Claw Retaining Clip

RAM Mounts Tough-Claw Retaining Clip (Large) with Locking Screw - C-Ball (1.5"), Diameter 25.4-55.9mm

Objev podobné jako RAM Mounts RAP-401U Tough-Claw Retaining Clip

RAM Mounts Tough-Claw Retaining Clip (Small) with Locking Screw - B-Ball (1 inch), Diameter 15.9-29.0 mm

Objev podobné jako RAM Mounts RAP-B-400U Tough-Claw Retaining Clip

RAM Mounts Tough-Claw Retaining Clip (Large) with Locking Screw - B-Ball (1 inch), Diameter 25.4-55.9 mm

Objev podobné jako RAM Mounts RAP-B-401U Tough-Claw Retaining Clip

RAM Mounts Tough-Claw Retaining Clip (Small) with Locking Screw - B-Ball (1 inch), Additional C-Ball (1.5 Inch), Diameter 15.9-29.0 mm

Objev podobné jako RAM Mounts RAP-BC-400U Tough-Claw

RAM Mounts Tough-Claw Set - C-Ball (1.5 inches), Tough-Claw Large (Diameter 25.4-55.9 mm), Center Link Arm (approx. 145 mm)

Objev podobné jako RAM Mounts RAP-401-202U Tough-Claw Set

RAM Mounts Tough-Ball with M8 - 1.25 x 10 mm Threaded Pin - C-Ball (1.5 inches), in a poly bag

Objev podobné jako RAM Mounts RAP-379U-M812510 Tough-Ball

RAM Mounts Tough-Ball with M10 - 1.5 in. x 25 mm Threaded Pin - B-Ball (1 Inch)

Objev podobné jako RAM Mounts RAP-B-379U-M10-JD1 Tough-Ball

RAM Mounts Tough-Ball with M6-1 x 6 mm Threaded Pin - B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-379U-M616 Tough-Ball

RAM Mounts Universal Composite Tough-Clamp (large) - diameter 19.1-28.6 mm, B-ball (1 inch), in poly bag

Objev podobné jako RAM Mounts RAP-B-397-2U Universal Composite Tough-Clamp

RAM Mounts RAM-A-CAN II Universal Composite Bracket with Diamond Connection (Trapezoid) - for Vehicle Cup Holders, Base with Rubber Lips, 2x Diamond Base Plate (Trapezoid), Middle Connection Arm

Objev podobné jako RAM Mounts RAP-299-3-B-102U RAM-A-CAN II Universal Composite Bracket

RAM Mounts Composite Mounting Set - 2x Diamond Base Plate (Trapezoid), Middle Connecting Arm, B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-102U Composite Mounting Set

RAM Mounts Composite Set for Cup Holders (Vehicles) - Cup Holder Base, Middle Link Arm, B Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-299-4-201U Composite Set

RAM Mounts Composite Cup Holder Base with Rubber Lips - B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-299-4U Composite Cup Holder Base

RAM Mounts Triple Suction Base with Round Base Plate (AMPS) - Each Twist Cap, Not Assembled, Plastic Plate, C-Ball (1.5"), in Poly Bag

Objev podobné jako RAM Mounts RAP-365-224-1U Triple Suction Base with Round Base Plate

RAM Mounts Composite Suction Base Set with Diamond Attachment - Middle Connecting Arm, 2x Diamond Base Plate (Trapezoid), B-Ball (1 Inch), in Poly Booty

Objev podobné jako RAM Mounts RAP-B-166U Composite Suction Base Set

RAM Mounts Composite Suction Base Set with Diamond Connection - Short Connection Arm, 2x Diamond Base Plate (Trapezoid), B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-166U-A Composite Suction Base Set

RAM Mounts Composite Connection Arm with 360° and 180° Swivels - for B-Balls (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-200-2U Composite Connection Arm

RAM Mounts Medium Composite Connection Arm - Approx. 90 mm long, for B-balls (1 inch), in poly bag

Objev podobné jako RAM Mounts RAP-B-201U Medium Composite Connection Arm

RAM Mounts Short Composite Connection Arm - approx. 60 mm long, for B-balls (1 inch), in poly bag

Objev podobné jako RAM Mounts RAP-B-201U-A Short Composite Connection Arm

RAM Mounts Suction Cup with Diamond Base Plate (Trapezoid, Composite) - Twist Cap, Not Mounted, B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-224-1U Suction Cup with Diamond Base Plate

RAM Mounts Composite Track Ball with T-Slot - B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-375U Composite Track Ball

RAM Mounts Composite Replacement Ball for Tough-Clamp - B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAP-B-397BU Composite Replacement Ball

RAM Mounts Composite Mounting Set - 2x Round Base Plate, Middle Connecting Arm, C-Ball (1.5"), in Poly Bag

Objev podobné jako RAM Mounts RAP-101U Composite Mounting Set

RAM Mounts Medium Composite Link Arm for C-Balls (1.5 inches) - Approx. 140 mm long, in poly bag

Objev podobné jako RAM Mounts RAP-201U Medium Composite Link Arm

RAM Mounts Round Composite Base Plate - C-Ball (1.5"), in Poly Bag

Objev podobné jako RAM Mounts RAP-202U Round Composite Base Plate

RAM Mounts Keyboard Mount with Rotatable Tablet Connection - Composite

Objev podobné jako RAM Mounts RAP-TAB-KB1-300U Keyboard Mount

RAM svěrka s ručním upínáním pro průměr 15,9 – 38,1 mm s 1" čepem se dokonale hodí pro rychlé upnutí vašeho zařízení například na řídítka motocyklu, berany v kokpitu letadla, sedlovku kola, madla na kajaku atd. Bezpečně udrží například mobilní telefon, GPS navigaci, tablet, videokameru, fotoaparát atd. Gumové polštářky chrání povrch před poškozením a zajišťují stabilitu. Čelisti svěrky jsou navrženy pro kulaté, ploché i nerovné povrchy. Pro průměr tyče: 15,9 – 38,1 mm Pro rovné plochy- desku: 0 – 28,9 mm Přednosti úchytu: Jednoduchá a rychlá montáž Vhodný pro oblé, ploché i nerovné povrchy Gumové polštářky zabraňují poškození povrchu Kompatibilní se systémem ramen a držáků RAM mount Doživotní záruka RAM mount Materiál: Vysokopevnostní plast Nerez ocel Velikost kulového čepu: Průměr 1", velikost „B“, pryžový Váha: 159 g Poznámka: „U“ v čísle dílu znamená, že výrobek je balený v PU sáčku.

Objev podobné jako RAM Mounts Tough-Claw malá svěrka s ručním upínáním pro průměr 15,9-38,1 mm, s 1"čepem, RAP-B-400U

RAM Mounts X-Grip Retaining Clip for Smartphones Large up to 114.3 mm Width - B-Ball

Objev podobné jako RAM Mounts X-Grip Retaining Clip

RAM Mounts Universal Printer Retaining Clip for Portable Printers - AMPS Connection (Bottom)

Objev podobné jako RAM Mounts Universal Printer Retaining Clip

RAM Mounts Universal Printer Retaining Clip for Portable Printers with Rear Paper Feeder - AMPS Connection (Bottom)

Objev podobné jako RAM Mounts Universal Printer Retaining Clip

RAM Mounts Tough-Claw Retaining Clip Base (Small) without Ball - Diameter 15.9-29.0 mm

Objev podobné jako RAM Mounts Tough-Claw

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM76CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+- in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C 3.1 Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active2, Active3 & Active5 - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM76CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM76CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM76CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Case - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, Tab S9 & Tab S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 35 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM78CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ in IntelliSkin Protective Sleeve - USB-C Power Supp

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9 & A7 Lite 8.7" - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector