ram mounts ram gds dock ze20pu gds ez roll

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE20PU GDS EZ-Roll

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE21PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE21PDU GDS EZ-Roll

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PD2U holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PD2U GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE21PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE21PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab A9 A7 Lite 8.7 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80-MMU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab Active2, Active3 Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62-MMU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 S9 FE in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM76CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the No Battery Mode function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ S10+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+- in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5 (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5 (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C 3.1 Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM76CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM76CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ 12.4 (SM-T970), S8+, S9 FE+, S9+ S10+ in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM78CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“)

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“)

This RAM Mounts GDS Desktop Dock with Power Delivery is suitable for smartphones and tablets in IntelliSkin Next Gen, IntelliSkin IntelliSkin HD protective sleeves. The charging station offers data connectivity via USB-C and the charging function. It is also ideal for permanent use (insertion/removal). Product features RAM Mounts RAM-GDS-DOCK-D2CM-NDU-GRY: Only compatible with IntelliSkin Next Gen protective sleeve Easy insertion and removal Power Delivery DeX Support (Next Gen) Input Connector: USB-C Output Voltage: 5V @ 2A 5V @ 3A 12V @ 1.5A 12V @ 3A Output Power: 48W Total Product dimensions: Height: 5,08 cm Width: 7,62 cm Depth: 10,41 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-D2CM-NDU-GRY Dock is supplied.

Objev podobné jako RAM Mounts GDS Desktop Dock mit Power Delivery for Smartphones and Tablets - In IntelliSkin Next Gen Protective Sleeve - DeX Support (Next Gen) - USB-

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9 A7 Lite 8.7 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CU: Compatible with GDS hand-stand more Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Transfer Speed: 5Gbps Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab Active3

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A7 Lite (8.7“) A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A7 Lite (8.7“)

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5 (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5 (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C 3.1 Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: This product will not support the No Battery Mode function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active2, Active3

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, S9 S9 FE in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM76CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7, S9

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, S9 S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM76CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM76CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7, S9

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, Tab S9 Tab S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 35 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM78CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A7 Lite (8.7“) A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A7 Lite (8.7“)

RAM Mounts GDS Tough-Dock Samsung Tab Active5 3 in IntelliSkin Charging/Protective Cases - USB-C, 15W Output, AMPS Mounts

Objev podobné jako RAM Mounts GDS Tough-Dock

RAM Mounts GDS Tough Dock with Snap Lock for Zebra ET4x 10 Inch Tablet in IntelliSkin Charging/Protective Cases - 5.5mm Jack, AMPS/VESA Mounts

Objev podobné jako RAM Mounts GDS Tough Dock

RAM Mounts GDS Charging Dock for Zebra EC50 EC55 - USB-C Input, 2-Hole AMPS Mounts

Objev podobné jako RAM Mounts GDS Charging Dock

RAM Mounts GDS Charging Dock for Zebra EC50 EC55 - lockable, USB-A/-C input, 2-hole AMPS mount

Objev podobné jako RAM Mounts GDS Charging Dock

RAM Mounts GDS Charging Dock for Zebra EC50 EC55 - lockable, USB-C input, 2-hole AMPS mount

Objev podobné jako RAM Mounts GDS Charging Dock