ram mounts ram gds dockl ze20pu gds form fit holder key locking for zebra et40 45 8

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PD2U GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

bezlepkové pečené medvídky v silikonové formě
knihovna Forme White s upevněním na stěnu
knihovna Forme White 188 cm výška
antiadhezní glazura na keramické formě
knihovna Form White and Walnut rozměry 90x132x32 cm
knihovna Form Cream and Walnut rozměry
recept na vánočku v keramické formě
moderní bílá knihovna Form White
kování RK.C-FORM.WC.CE
šest minerálů v chelátové formě
kompletní krmivo pro cichlidy ve formě tyčinek
noční světélko ve formě plyšáka
kreatinové doplňky stravy v želé formě
japonská literatura v komiksové formě
chytré hodinky Trevi T-FIT 230 CALL černá
Trevi T-FIT 230 CALL monitor srdečního tepu a spánku

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE21PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC73 & TC78.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE17L-NP-1U:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated Stylus holderLockable with keyAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE17L-NP-1U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE17L-NP-1U Form-Fit Holder (key-locking) for Zebra TC73/78

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE20PU GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts Quick-Draw Form-Fit holder is suitable for Zebra TC8000 & TC8300.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE9U:Spring-loaded design for easy insertion and removalAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE9U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE9U Quick-Draw Form-Fit Holder for Zebra TC8300

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE21PDU GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied through a Power over Ethernet (PoE) connection over a RJ45 port to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-7-U3E: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67A Power Output: 24W max Transfer Speed: 10/100Mbps Input Connector: JST Male Connector Input Cable Length: ca. 150 cm Includes RAM PoE to PD Charging Module Product Dimensions: Height from ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection - RJ45 Connec

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied through a Power over Ethernet (PoE) connection over a RJ45 port to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-7-U3E-GRY: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67A Power Output: 24W max Transfer Speed: 10/100Mbps Input Connector: JST Male Connector Input Cable Length: ca. 150 cm Includes RAM PoE to PD Charging Module Product Dimensions: Height from ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection - RJ45 Connec

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied through a Power over Ethernet (PoE) connection over a RJ45 port to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-14-U3E: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67A Power Output: 24W max Transfer Speed: 10/100Mbps Input Connector: JST Male Connector Input Cable Length: ca. 150 cm Includes RAM PoE to PD Charging Module Product Dimensions: Height from ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection - RJ45 Conne

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied through a Power over Ethernet (PoE) connection over a RJ45 port to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-14-U3E-GRY: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @ 1.67A Power Output: 24W max Transfer Speed: 10/100Mbps Input Connector: JST Male Connector Input Cable Length: ca. 150 cm Includes RAM PoE to PD Charging Module Product Dimensions: Height from ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection - RJ45 Conne

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CP-CU holder ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPDU holder ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C Ausgangsleistung: 15W Ausgangsspannung: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied via a USB-C connection to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-7-U3C: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: 60W max Input Connector: USB-C Input Cable Length: ca. 150 cm Includes USB-C 2.0 cable (1 meter) Product Dimensions: Height from base to tilt bolt: 18.4 cm Base Width: 9.7 cm Base Depth: 9.7 cm Weight: approx. 905 g Additional information: The Lever Stop included ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied via a USB-C connection to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-7-U3C-GRY: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: 60W max Input Connector: USB-C Input Cable Length: ca. 150 cm Includes USB-C 2.0 cable (1 meter) Product Dimensions: Height from base to tilt bolt: 18.4 cm Base Width: 9.7 cm Base Depth: 9.7 cm Weight: approx. 905 g Additional information: The Lever Stop included ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection - Gray

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied via a USB-C connection to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-14-U3C: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: 60W max Input Connector: USB-C Input Cable Length: ca. 150 cm Includes USB-C 2.0 cable (1 meter) Product Dimensions: Height from base to tilt bolt: 34.87 cm Base Width: 9.7 cm Base Depth: 9.7 cm Weight: approx. 1.22 kg Additional information: The Lever Stop included ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Thin-Case with Rear Pogo Pads. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. It features an adapter plate for drill-down mounting, providing a stable base. Power is supplied via a USB-C connection to the rear pogo pads integrated into the IntelliSkin Thin-Case. It also supports an easy docking and undocking process: The device in the IntelliSkin protective case is simply inserted into the base of the dock and pushed until it snaps into place. To remove it, a simple press of the lever releases the tablet. Product features RAM-GDS-DOCKLR-D11-14-U3C-GRY: Only compatible with IntelliSkin Thin-Case (Rear Pogo Pads) Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: 60W max Input Connector: USB-C Input Cable Length: ca. 150 cm Includes USB-C 2.0 cable (1 meter) Product Dimensions: Height from base to tilt bolt: 34.87 cm Base Width: 9.7 cm Base Depth: 9.7 cm Weight: approx. 1.22 kg Additional information: The Lever Stop included ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14") with Key Locking (Right) for Rear Pogo Pins - Rotatable & Tiltable - USB-C Connection - Gray

The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Left) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Rechts) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-7-U1C-GRY: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection - Gray

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-7-U1E: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7“) with Key Locking (Right) - Rotatable & Tiltable - RJ45 Connection - PoE (Power over Ethernet)

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-7-U1E-GRY: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7“) with Key Locking (Right) - Rotatable & Tiltable - RJ45 Connection - PoE (Power over Ethernet) - Gra

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-14-U1C: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-14-U1E: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14“) with Key Locking (Right) - Rotatable & Tiltable - RJ45 Connection - PoE (Power over Ethernet)

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-14-U1C-GRY: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection - Gray

The RAM Mounts GDS Uni-Conn docking station (14“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a Power over Ethernet (PoE) connection over a RJ45 port. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-14-U1E-GRY: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (14“) with Key Locking (Right) - Rotatable & Tiltable - RJ45 Connection - PoE (Power over Ethernet) - Gr

The RAM Mounts GDS Uni-Conn docking station (7“) with Key-Locking (Right) is a free-standing dock designed for devices enclosed in an IntelliSkin Next-Gen, IntelliSkin Hard Case, or IntelliSkin Thin-Case with a mounted GDS Uni-Conn adapter. This solution can swivel 180 degrees and allows the device to tilt 180 degrees, making it ideal for customer-centric industries like retail, hospitality, food service, and more. The snap-in holder keeps your device securely in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The docking station is mounted using a screw-down attachment, which provides a stable base for the tall pedestal. It also supports an easy docking and undocking process: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the compatible IntelliSkin protective sleeve. Product features RAM-GDS-DOCKLR-D11-7-U1C: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Output Voltage: 5-20V @ 3A max Power Output: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Stand Docking Station (7“) with Key Locking (Right) - Rotatable & Tiltable - USB-C Connection

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE21PKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged BootLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Frame, see RAP-INSERT-ZE21LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE21PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE21PKLU Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.This dock is not compatible with IntelliSkin.For IntelliSkin ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE20PDKLU Form-Fit Holder (key-locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25LU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDHLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PDHLU Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PLU Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC8300.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE26PHLU:Spring-loaded design for easy insertion and removalCharging functionHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 5.4VInput Cable Length: ca. 100 cmCertification: FSS, CE, RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE26PHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE26PHLU Form-Fit Holder (Key-Locking) for Zebra TC8300

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PDLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCOutput ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PDLU Form-Fit Holder (key-locking) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 with Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PLU:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with KeysInput Connector: USB-A Input Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE24PLU Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 without Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PL-1U:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with keyInput Connector: USB-AInput Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PL-1U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE24PL-1U Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts EZ-Roll‘r (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE20PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE20PKLU EZ-Roll’r Holder (key-locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PD2KLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PD2KLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE10PD2KLU Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra XSLATE L10.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE15PDKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE15PDKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE15PDKLU Form-Fit Holder (key-Locking) for Zebra L10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE11PKLU Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE10PKLU Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22LU:Compatible with accessoriesEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22LU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22LU Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 8.3“ & 8.4“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE10PDKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5 mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE10PDKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE10PDKLU Form-Fit Holder (Key-Locking) for Zebra ET51/56 (8")