Pre-assembled cable, pac, cable liyy, 0,14 mm² weidmüller pac-univ-he20-lcf-1m 7789388010, 1 ks

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-LCF-1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE10-LCF-1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-LCH-1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-LCH-2M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-LCH-3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-LCH-4M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-LCH-5M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-LCH-6M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 6M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 8M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 0M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 2M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 2M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 5M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F 9 M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-F-10M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-1:1-0M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-1:1-2M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-1:1-3 M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE20-1:1-1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE10-LCF-3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE10-LCF-2M (conrad.cz)

In comparison to conventional point-to-point cabling, the new PLC (FAD) front adapters combined with the passive (RSF PLC) and the active (RSF PLC) interfaces offer an improved, more efficient method of field wiring. PLC (FAD) front adapters are connected to the PLC and to a standard cable which is connected to the interface or the MICROSERIES relay. PAC-UNIV-HE20-S25 1M (conrad.cz)

In comparison to conventional point-to-point cabling, the new PLC (FAD) front adapters combined with the passive (RSF PLC) and the active (RSF PLC) interfaces offer an improved, more efficient method of field wiring. PLC (FAD) front adapters are connected to the PLC and to a standard cable which is connected to the interface or the MICROSERIES relay. PAC-UNIV-HE40-FD11M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. Univerzální-RV PAC36-F 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV-HE40-F 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CJ1W-U20-V9, 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CJ1W-U20-V101M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CJ1W-U20-V111M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CMLX-HE20-V6 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HE20-V3 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-TWDO-HE20-V3 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-M340-HE20-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CJ1W-U20-V3 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HE20-V6 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HE20-V7 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HE20-V4 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-GF30-HE20-V1 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S400-HE20-V1 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S400-HE20-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-STOP-HE20-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CMLX-HE20-V5, 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CMLX-HE20-V4 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HE20-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-SLC5-HE20-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CTLX-HE20-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CTLX-HE20-V01M (conrad.cz)