Pre-assembled cable, pac, cable liycy, 0,25 mm² weidmüller pac-s300-sd37-v2-1m 7789231010, 1 ks

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V2, 3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V25M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V2 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V2 2M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V4 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V32M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V02M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V03M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V10M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD37-V1 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V3, 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V3, 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V1 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V2 2M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V2 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V2, 3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V24M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V2 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V2 2M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V2, 3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HE20-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-RV24-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-UNIV SD37-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S400-SD37-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-GF30-SD37-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-M340-SD37-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HE20-S-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-HESD-V01M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-CTLX SD25-V2 1M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V35M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V3 7 M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V310M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V32M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V3 3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V3 4M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-UNIS-V02M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V3 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V32M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V12M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V15M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V17M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V32M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V3 3M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V3 4M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD15-V35M (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V1 1M5 (conrad.cz)

The pre-assembled PAC cable provide the electrical and logical connection between the PLC and the PLC interfaces. These cables consist of the following elements: PLC connection from the manufacturer. Multi-pole LIYY or LY YCY (shielded) cable with 0.14 mm² or 0.25 mm² cross-section. SubD or RSV connectors for the connection to the interface. The cables are automatically tested for continuity and isolation in order to guarantee their special functionalityfor which they were developed. PAC-S300-SD25-V12M (conrad.cz)