High-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/16/180F 3.2SN BK BX 1031540000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Jst zásuvkový konektor na kabel xh počet pólů 4 rastr (rozteč): 2.50 mm 800140 (800140)Obsahuje: 1 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Zásuvkový konektor do DPS econ connect CGD16, pólů 16, rozteč 2.54 mm, 1 ks , Jst zásuvkový konektor na kabel xh počet pólů 6 rastr (rozteč): 2.50 mm 800170 (800170)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Phoenix Contact MC 1,5/16-GF-3,5-LR 1817754, 66.3 mm, pólů 16, rozteč 3.5 mm, 1 ks , Vrták do dřeva, 16 x 600 mm (120740)Obsahuje: 1 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS TE Connectivity 827539-1 827539-1, pólů 16, rozteč 5 mm, 1 ks , Vrták do dřeva, 16 x 400 mm (120734)2řadé připojení kabelu k DPS, které lze znovu rozpojit Při zasunutí pouzdra na blokovací lištu se ozve cvaknutí. Obvodový žlábek na pinové liště zajišťuje ochranu proti přepólování. Snadné připájení díky pozinkované pinové liště. Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS JST S16B-PASK-2 (LF)(SN), pólů 16, rozteč 2 mm, 1 ks , Ron 442 16 mm - balení 100 ks (20400001)High-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/16/90G 3.2SN BK BX 1973790000, 31.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Pletivo rabicové pletené, 16 x 16 x 1000 mm x 50 m (142312)High-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/16/90F 3.2SN BK BX 1974240000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Vrták hadovitý do dřeva 16 x 300 mm (120899)High-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/16/180G 3.2SN BK BX 1031020000, 31.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Kreator vrták do betonu 16 x 400 mm (krt010421)The SC pin header has a perpendicular (standing) plugging direction in relation to the PCB. It is available in closed (G) and screw flange (F) versions. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 1·Počet pólů: 8 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SC 3.81/08/180G 3.2SN GN BX 1793660000, 31.88 mm, pólů 8, rozteč 3.81 mm, 50 ks , Kreator vrták do betonu 16 x 600 mm (krt010427)Two-tier SCD pin header for wave soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 180° (standing). Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD 3.81/16/180F 3.2SN BK BX 1030850000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Kreator vrták do betonu 16 x 150 mm (krt010411)High-temperature-resistant two-tier SCDV-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at two offset levels and open access to each row. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCDV-THR 3.81/16/180F 3.2SN BK BX 1036020000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Meister bambusová tyč tonkin, 14-16 mm, 1800 mm, 1 ks (wu9966460)High-temperature resistant, double level, laterally offset, male connector with flange or solder flange. 1.5 mm solder pin is suitable for reflow soldering. 3.2 mm solder pin suitable for reflow and wave soldering. The pin headers provide space for labelling and can be coded. 400 V (IEC) / 300 V (UL) 15 A (IEC) / 10 A (UL) Obsahuje: 20 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SLDV-THR 5.00/16/180F 3.2SN BK BX 1882990000, 50 mm, pólů 16, rozteč 5 mm, 20 ks , List do lupénkové pily na dřevo g, 165 mm, rozteč 1,5 mm, 5 ks (124452)Two-tier SCD pin header for wave soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 180° (standing). Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD 3.81/16/180F 3.2SN OR BX 1030510000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , List do lupénkové pily na dřevo e, 165 mm, rozteč 1 mm, 5 ks (124451)Počet pólů 16·Počet řádků 2·Obsahuje 1 ks (conrad.cz)
Podobné produkty ako Konektor do DPS Phoenix Contact SDDC 1,5/ 8-PV-3,5 1848707, počet pólů 16, rastr (rozteč) 3.50 mm, 1 ks , Jst pinová lišta (standardní) xh počet pólů 6 rastr (rozteč): 2.50 mm 800194 (800194)Two-tier SCD pin header for wave soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD 3.81/16/90F 3.2SN BK BX 1973640000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Jst pinová lišta (standardní) xh počet pólů 2 rastr (rozteč): 2.50 mm 800943 (800943)Two-tier SCD pin header for wave soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD 3.81/16/90G 3.2SN BK BX 1973160000, 31.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Klíč očkoplochý 16 mm crv (117579)Two-tier SCD pin header for wave soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 180° (standing). Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD 3.81/16/180G 3.2SN BK BX 1030340000, 31.87 mm, pólů 16, rozteč 3.81 mm, 50 ks , Krt011203 - kuželový záhlubník 16 mm (krt011203)Počet pólů 16·Počet řádků 2·Obsahuje 1 ks (conrad.cz)
Podobné produkty ako Konektor do DPS TRU COMPONENTS TC-02800-16-50-7,5, řádků 2, pólů 16, 1 ks , List pilový, 300 mm, rozteč 3 mm (124160)High-temperature resistant, double level, laterally offset, male connector with flange or solder flange. 1.5 mm solder pin is suitable for reflow soldering. 3.2 mm solder pin suitable for reflow and wave soldering. The pin headers provide space for labelling and can be coded. 400 V (IEC) / 300 V (UL) 15 A (IEC) / 10 A (UL) Obsahuje: 20 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SLDV-THR 5.08/16/180F 3.2SN BK BX 1828830000, 50.8 mm, pólů 16, rozteč 5.08 mm, 20 ks , List pilový, 300 mm, rozteč 4 mm (124161)High-temperature resistant, double level, laterally offset, male connector with flange or solder flange. 1.5 mm solder pin is suitable for reflow soldering. 3.2 mm solder pin suitable for reflow and wave soldering. The pin headers provide space for labelling and can be coded. 400 V (IEC) / 300 V (UL) 15 A (IEC) / 10 A (UL) Obsahuje: 20 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SLDV-THR 5.08/16/180F 1.5SN BK BX 1828950000, 50.8 mm, pólů 16, rozteč 5.08 mm, 20 ks , Sekáč plochý, 16 x 350 mm (119404)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Konektor do DPS econ connect CGV3, pólů 3, rozteč 3.96 mm, 1 ks , Canon rf 16 mm f2.8 stm (5051c005)Patice do DPS, 17.8 mm, pólů: 16, 1 ks od výrobce No Name PL v kategorii IO patice, IO objímky za skvělou cenu u Conrada. (conrad.cz)
Podobné produkty ako Patice do DPS, 17.8 mm, pólů: 16, 1 ks , Klíč nástrčný 1/2", 16 mm (117261)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Zásuvkový konektor do DPS Connfly DS1020-03RT1D, 6.75 mm, pólů 3, rozteč 2.54 mm, 1 ks , Sekáč plochý, 16 x 250 mm (119401)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Zásuvkový konektor do DPS Connfly DS1020-03ST1D, 4.50 mm, pólů 3, rozteč 2.54 mm, 1 ks , Nikon z30 + z dx 16–50 mm f/3,5–6,3 vr (voa110k001)The SC pin header has a perpendicular (standing) plugging direction in relation to the PCB. It is available in closed (G) and screw flange (F) versions. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 1·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SC 3.81/16/180F 3.2SN BK BX 1793780000, 71.56 mm, pólů 16, rozteč 3.81 mm, 50 ks , Gardena mds-rozdělovací trubka 4,6 mm (3/16"), 50 m (1348-20)Male headers made from glass-fibre-reinforced plastic with straight wire outlet; optimised for wave soldering. The flange variant (F) can be screwed onto the mating connector or the circuit board. There is no need for an extra screw connecting the circuit board when the solder flange version is used. This also protects the solder points from mechanical strain. All male headers can be manually coded or ordered as pre-coded headers. Obsahuje: 50 ks·Počet řádků: 1·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SL 5.08HC/16/180F 3.2SN BK BX 1148920000, 91.28 mm, pólů 16, rozteč 5.08 mm, 50 ks , Nikon z50 + z dx 16–50 mm f/3,5–6,3 vr (voa050k001)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Konektor do DPS TE Connectivity 643488-1, kontakty v řadě 3, pólů 3, rozteč 5.08 mm, 1 ks , Hoteche pneumatická sponkovačka 6-16 mm - hta831214 (hta831214)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Konektor do DPS TE Connectivity 350210-1, kontakty v řadě 3, pólů 3, rozteč 5.08 mm, 1 ks , Pritt refill permanent 8,4 mm × 16 m (9000101103175)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Konektor do DPS DECA 1188480, počet pólů 3, rastr (rozteč): 5 mm, 1 ks , Compass stěrač zadní flat 16"/410 mm (10180)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Konektor do DPS DECA 1307123, počet pólů 3, rastr (rozteč): 3.50 mm, 1 ks , Klíč imbus, 2 mm, 16 x 81 mm, prodloužený, crv, festa (118511)Obsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Konektor do DPS econ connect CSV3G/2, pólů 3, rozteč 2 mm, 1 ksObsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Zásuvkový konektor do DPS econ connect CGM3, pólů 3, rozteč 3.96 mm, 1 ksObsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Zásuvkový konektor do DPS econ connect CG3, pólů 3, rozteč 2.54 mm, 1 ksObsahuje: 1 ks·Počet řádků: 1·Počet pólů: 3 (conrad.cz)
Podobné produkty ako Zásuvkový konektor do DPS econ connect CV3, pólů 3, rozteč 2.54 mm, 1 ksHigh-temperature-resistant male header, packed in box or tape. In tape with 1.5 mm solder pin optimised for automatic assembly. 3.2 mm solder pin suitable for reflow and wave soldering. These male connectors provide space for labelling and can be coded. 400 V (IEC) / 300 V (UL) 19 A (IEC) / 15 A (UL) Obsahuje: 50 ks·Počet řádků: 1·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SL-SMT 5.08/16/180F 3.2SN BK BX 1820640000, 91.28 mm, pólů 16, rozteč 5.08 mm, 50 ksHigh-temperature-resistant two-tier SCDV-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at two offset levels and open access to each row. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCDV-THR 3.81/16/180G 3.2SN BK BX 1035540000, 31.87 mm, pólů 16, rozteč 3.81 mm, 50 ksExtra flat high-temperature-resistant two-tier SCDN-THR pin header for reflow soldering. Two compact interfaces are used with the flat BCF 3.81 (PUSH IN) socket block. Available as 90° (recumbent). Connections on a single level, allowing access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCDN-THR 3.81/16/90G 3.2SN BK BX 1039020000, 31.87 mm, pólů 16, rozteč 3.81 mm, 50 ksExtra flat high-temperature-resistant two-tier SCDN-THR pin header for reflow soldering. Two compact interfaces are used with the flat BCF 3.81 (PUSH IN) socket block. Available as 90° (recumbent). Connections on a single level, allowing access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCDN-THR 3.81/16/90F 3.2SN BK BX 1039550000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCDV-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at two offset levels and open access to each row. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCDV-THR 3.81/16/90F 3.2SN BK BX 1034040000, 40.87 mm, pólů 16, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCDV-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at two offset levels and open access to each row. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 16 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCDV-THR 3.81/16/90G 3.2SN BK BX 1033560000, 35.67 mm, pólů 16, rozteč 3.81 mm, 50 ksObsahuje: 1 ks·Počet řádků: 1·Počet pólů: 5 (conrad.cz)
Podobné produkty ako Zásuvkový konektor do DPS TE Connectivity 640901-3, 13.97 mm, pólů 5, rozteč 6.35 mm, 1 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 10 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/10/180F 3.2SN BK BX 1031510000, 29.44 mm, pólů 10, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 12 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/12/180F 3.2SN BK BX 1031520000, 33.25 mm, pólů 12, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 4 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/04/180F 3.2SN BK BX 1031460000, 25.10 mm, pólů 4, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 6 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/06/180F 3.2SN BK BX 1031470000, 25.10 mm, pólů 6, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 8 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/08/180F 3.2SN BK BX 1031490000, 25.63 mm, pólů 8, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 24 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/24/180F 3.2SN BK BX 1031610000, 56.11 mm, pólů 24, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 14 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/14/180F 3.2SN BK BX 1031530000, 37.06 mm, pólů 14, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 18 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/18/180F 3.2SN BK BX 1031560000, 44.68 mm, pólů 18, rozteč 3.81 mm, 50 ksHigh-temperature-resistant two-tier SCD-THR pin header for reflow soldering. It allows you to use two interfaces on only one surface and with only one step in the work flow. Outlet direction: 90° (recumbent) Connections at the same level and with access that is flush over the front board. Space for labelling and coding Packed in cardboard box. Weidmüller's 3.81-mm-pitch (0.15 inch) plug-in connectors are compatible with the layouts of standard connectors and offer space for labelling and coding. 320 V (IEC) / 300 V (UL) 17.5 A (IEC) / 10 A (UL) Obsahuje: 50 ks·Počet řádků: 2·Počet pólů: 20 (conrad.cz)
Podobné produkty ako Konektor do DPS Weidmüller SCD-THR 3.81/20/180F 3.2SN BK BX 1031570000, 48.49 mm, pólů 20, rozteč 3.81 mm, 50 ks