Device markers, multicard, 12 x 27 mm, polyamide 66, colour: white weidmüller počet markerů: 50 dmc 12/27 mc ne wsmnožství: 50 ks

The DMC markers can be used for labelling switching devices or sub-assemblies. The large (12 x 27 mm) marking surface offers sufficient room for information describing the device and its function. Only one tag size for cable cross-sections from 0.5 - 10 mm² enables use on both multi-core control cables and single cores. (conrad.cz)

The DMC markers can be used for labelling switching devices or sub-assemblies. The large (12 x 27 mm) marking surface offers sufficient room for information describing the device and its function. Only one tag size for cable cross-sections from 0.5 - 10 mm² enables use on both multi-core control cables and single cores. (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags (conrad.cz)

SlimFix X are conductor and cable markers with a space-saving design. The markers can be fitted even after the conductor has been installed. They consist of halogen-free material and comply with flammability rating V0. SlimFix is an acknowledged and accredited marker type for traffic engineering applictions. The SF tool allows easy installation, even in case of small markers. Halogen-free material Flammability rating V0 Approved and accredited markers for traffic engineering applications, etc. Has to be fixed with cable ties if the conductor cross-section is larger than 16.0 mm² Markers in proven MultiCard format (conrad.cz)

CLI TM is the right sleeve for large conductor cross-sections. The sleeve's transparent pocket protects the inlay tags against environmental influences. Cable ties are used to fix the transparent CLI TM sleeve in place. Marking is carried out with TM-I 18 for CLI TM 10/33 or ESG 9/17 for CLI TM20/33. Both inlay tags are designed in the proven MultiCard format and and can be comfortably labelled with SMark laser, PrintJet, plotter or MC-Mobilo. The CLI F 2/17,5 tag is suitable for CLI TM 20/66. Secure attachment with cable ties Professional labelling thanks to Weidmüller's marking devices for MultiCards (conrad.cz)

The SlimFix Clip combines two advantages: its unique closure mechanism offers the reliability of a closed marker with the ease of installation of an open marker. The clip mechanism allows quick and convenient installation of the marker even after the conductor has been installed. SlimFix Clips are suitable for conductors and cables with an outside diameter of up to 5 mm. The large marking surface - up to 30 mm - enables long character strings. The material is halogen-free and complies with flammability rating V2. Halogen-free material Flammability rating V2 Fast installation without tools Markers in proven MultiCard format Available in the lengths of 12 mm, 21 mm and 30 mm (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

The CC 15/45 MC is optimally designed for the 45 mm wide auxiliary contactors and motor circuit breakers, and enables clear, large-format labelling in the cabinet. Can be mounted using the adhesive film already fitted or using a CC-rail 1000 tag rail. (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags (conrad.cz)

ClipCard O4mm MC are device markers in MultiCard format. These special versions can be easily fixed using screws or rivets through the 4.2 mm holes drilled on both sides. (conrad.cz)

The new SwitchMark markers have been designed for identifying rotary selector switches from ABB (SM 19/42 K MC) as well as control and signalling devices from Siemens (SM 18/9.5 K MC). Suitable for: SM 18/9.5 K MC: Siemens, type 3SB SM 19/42 K MC: ABB, tag carrier type ONFB72 (conrad.cz)

The CC DIA 30 MC is used for labelling hydraulic hoses, lights and indicators. Variants with 4.2 mm holes for M4 screws or cable ties can be used for mounting. The variant with 3.5 mm holes is for 3.2 mm blind rivets. According to DIN V VDE V 0108 Part 100 from 01.2010, safety illumination and connection / branch-off point lights which are part of a safety illumination system must be easily and reliably identifiable and marked in red or green. The distributor, electric circuit and lamp ID numbers must be attached next to the lamps. (conrad.cz)

The CC DIA 30 MC is used for labelling hydraulic hoses, lights and indicators. Variants with 4.2 mm holes for M4 screws or cable ties can be used for mounting. The variant with 3.5 mm holes is for 3.2 mm blind rivets. According to DIN V VDE V 0108 Part 100 from 01.2010, safety illumination and connection / branch-off point lights which are part of a safety illumination system must be easily and reliably identifiable and marked in red or green. The distributor, electric circuit and lamp ID numbers must be attached next to the lamps. (conrad.cz)

The SM 45/45-24 MC can be used to label size T0 rotary selector switches from Eaton Moeller. (conrad.cz)

The new SwitchMark markers have been designed for identifying rotary selector switches from ABB (SM 19/42 K MC) as well as control and signalling devices from Siemens (SM 18/9.5 K MC). Suitable for: SM 18/9.5 K MC: Siemens, type 3SB SM 19/42 K MC: ABB, tag carrier type ONFB72 (conrad.cz)

ClipCard O4mm MC are device markers in MultiCard format. These special versions can be easily fixed using screws or rivets through the 4.2 mm holes drilled on both sides. (conrad.cz)

ClipCard O4mm MC are device markers in MultiCard format. These special versions can be easily fixed using screws or rivets through the 4.2 mm holes drilled on both sides. (conrad.cz)

The CC 15/45 MC is optimally designed for the 45 mm wide auxiliary contactors and motor circuit breakers, and enables clear, large-format labelling in the cabinet. Can be mounted using the adhesive film already fitted or using a CC-rail 1000 tag rail. (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags 10 kusů (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

The halogen-free, transparent pocket of the WKM offers outstanding protection against environmental influences. Thanks to firm fixation with cable ties, it is suitable for almost all wire cross-sections. The pre-printed tags are simply inserted into the WKM holder and secured with a clip. WKM cable markers are the right solution for maximum efficiency in on-site marking. Your advantage when using WKM cables Paper and polyester labels can be printed individually with conventional office printers The robust design in combination with MultiCard ELS tags guarantees maximum protection against environmental influences (conrad.cz)

The halogen-free, transparent pocket of the WKM offers outstanding protection against environmental influences. Thanks to firm fixation with cable ties, it is suitable for almost all wire cross-sections. The pre-printed tags are simply inserted into the WKM holder and secured with a clip. WKM cable markers are the right solution for maximum efficiency in on-site marking. Your advantage when using WKM cables Paper and polyester labels can be printed individually with conventional office printers The robust design in combination with MultiCard ELS tags guarantees maximum protection against environmental influences (conrad.cz)

The halogen-free, transparent pocket of the WKM offers outstanding protection against environmental influences. Thanks to firm fixation with cable ties, it is suitable for almost all wire cross-sections. The pre-printed tags are simply inserted into the WKM holder and secured with a clip. WKM cable markers are the right solution for maximum efficiency in on-site marking. Your advantage when using WKM cables Paper and polyester labels can be printed individually with conventional office printers The robust design in combination with MultiCard ELS tags guarantees maximum protection against environmental influences (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

ESG is the tried-and-tested marker in MultiCard format for use on many well-known electrical devices. The result is high-quality device marking with a high-contrast appearance. Various types are available for devices from the following manufacturers: Siemens Télémecanique ABB Beckhoff Lumberg Tags for all-purpose usage; self-adhesive or clip-on tags, depending on the type Advantages at a glance: Tags for universal usage, self-adhesive or clip-on tags, depending on type For aligned equipment, e.g. circuit breakers, we supply ESG markers for clipping onto tag rails Individual laser-quality printing according to specifications (conrad.cz)

ESG is the tried-and-tested marker in MultiCard format for use on many well-known electrical devices. The result is high-quality device marking with a high-contrast appearance. Various types are available for devices from the following manufacturers: Siemens Télémecanique ABB Beckhoff Lumberg Tags for all-purpose usage; self-adhesive or clip-on tags, depending on the type Advantages at a glance: Tags for universal usage, self-adhesive or clip-on tags, depending on type For aligned equipment, e.g. circuit breakers, we supply ESG markers for clipping onto tag rails Individual laser-quality printing according to specifications (conrad.cz)

Device markers, MultiCard, 15 x 6 mm, Polyamide 66, Colour: White, pluggable Weidmüller Počet markerů: 200 ESG 6/15 F MC NE WSMnožství: 200 ks od výrobce Weidmüller v kategorii Systémy označování kabelů za skvělou cenu u Conrada. (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

ClipCard device markers in MultiCard format are used for labelling electrical installations and switchgear systems, and offer an interesting alternative to engraving. Thanks to the proven MultiCard format, labelling is possible with PrintJet PRO, the MCP Plus plotter, MCP Basis and MC-Mobilo. Highly resistant printing quality when using the PrintJet as a substitute for engraving Universal fixing Carrier (screwable or with cable ties) Tag rail (self-adhesive or screw fixing) Or self-adhesive tags (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)

SM is a MultiCard marker for labelling control and signalling devices. The tags are clipped into the carriers or attached by means of the adhesive film already fitted to them. Customised tags can be created with the PrintJet PRO, MCP Plus plotter, MCP Basic or MC-Mobilo marking systems. Users can quickly produce tags to suit their needs No need to stock expensive standard tags Highly resistant printing quality when using the PrintJet as a substitute for engraving For extreme demands, we recommend the ETO SM protective film Holders can be used for the 22-mm-diameter push-buttons from Siemens, ABB, Moeller and Télémécanique (conrad.cz)