Act20x, ex signal isolating converter, 1-channel version, weidmüller act20x-hai-sao-s 8965430000 1 ks

The ACT20X-HAI-SAO/2HAI-2SAO HART-protocol transparent current-supply isolators are capable of transmitting 4...20 mA signals from Ex zone 0 into the safe zone. External sensors can be supplied with power through the device. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted current-supply isolators are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-HAI-SAO-S (conrad.cz)

The ACT20X-HTI-SAO / 2HTI-2SAO temperature transducers record temperatures from PT100 sensors and thermocouples from Ex zone 0. Current loops from 0(4) to 20 mA can also be connected on the input side. On the output side, there are active and passive current loops available for the safe zone. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail-mounted current output isolators are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-HTI-SAO-S (conrad.cz)

The ACT 20X HUI-SAO-S/ SAO-LP universal measurement and signal isolating converters can be configured individually. Temperature signals from PT100 sensors and thermocouples as well as analogue DC current and voltage signals can be recorded from Ex zone 0. On the output side, optional current/voltage (SAO-S) or 4...20 mA current loop signals (SAO-LP / SAO-S) are provided for the safe zone. The ACT20X-HUI-SAO-S also has a relay output for configuring its switching threshold. An integrated alarm contact is available on this device for issuing an alert in the event of a malfunction. This makes troubleshooting easier and also increases system availability. The power supply of the signal isolating converter is either done using the integrated power supply (SAO-S) or alternatively over the output-side current loop (SAO-LP). The rail mountable devices are designed with one channel, and are optionally available in widths of 12.5 mm (SAO-LP) or 22.5 mm (SAO-S). ACT20X-HUI-SAO-S (conrad.cz)

The ACT20X HDI SDO S / 2HDI-2SDO-S isolating switch amplifiers are specially designed for recording NAMUR sensor signals and digital switching signals which originate from Ex zone 0. Negative-switching (NPN) transistor outputs are used to transmit the signals to applications in the safe zone. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. [!-- ACT20X-HDI-SDO-S (conrad.cz)

The ACT20X-SAI-HAO/2SAI-2HAO current output isolators are suitable for controlling field devices in Ex areas, up to Zone 0. The input/output-side HART protocol transparent signal connection is implemented using 4 to 20 mA current loops. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail-mounted current output isolators are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-SAI-HAO-S (conrad.cz)

The ACT20X-HTI-SAO / 2HTI-2SAO temperature transducers record temperatures from PT100 sensors and thermocouples from Ex zone 0. Current loops from 0(4) to 20 mA can also be connected on the input side. On the output side, there are active and passive current loops available for the safe zone. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail-mounted current output isolators are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-2HTI-2SAO-S (conrad.cz)

The ACT20X HDI SDO S / 2HDI-2SDO-S isolating switch amplifiers are specially designed for recording NAMUR sensor signals and digital switching signals which originate from Ex zone 0. Negative-switching (NPN) transistor outputs are used to transmit the signals to applications in the safe zone. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. [!-- ACT20X-2HDI 2SDO-S (conrad.cz)

The ACT20X-HAI-SAO/2HAI-2SAO HART-protocol transparent current-supply isolators are capable of transmitting 4...20 mA signals from Ex zone 0 into the safe zone. External sensors can be supplied with power through the device. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted current-supply isolators are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-2HAI-2SAO-S (conrad.cz)

The ACT20X-SAI-HAO/2SAI-2HAO current output isolators are suitable for controlling field devices in Ex areas, up to Zone 0. The input/output-side HART protocol transparent signal connection is implemented using 4 to 20 mA current loops. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail-mounted current output isolators are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-2SAI-2HAO-S (conrad.cz)

The ACT20X-HDI-SDO/ 2HDI-2SNO RNO/RNC isolating switch amplifiers are specially designed for recording NAMUR sensor signals and digital switching signals which originate from Ex zone 0. Switching relays, optionally available with NO or NC contacts, transfer output signals to the safe zone. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-HDI-SDO-RNC-S (conrad.cz)

The ACT20X-HDI-SDO/ 2HDI-2SNO RNO/RNC isolating switch amplifiers are specially designed for recording NAMUR sensor signals and digital switching signals which originate from Ex zone 0. Switching relays, optionally available with NO or NC contacts, transfer output signals to the safe zone. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-HDI-SDO-RNO-S (conrad.cz)

The ACT20X-SDI-HDO/2SDI-2HDO valve control modules are controlled from the safe zone on the input side by the switching signals (NPN, PNP) and provide digital outputs to switch actuators (solenoids, alarms) in Ex zone 0. Depending on the module, the output current is limited for the ignition protection groups IIC/IIB to 35 mA or 60 mA (only one channel). Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-SDI HDO-L-S (conrad.cz)

The ACT20X-SDI-HDO/2SDI-2HDO valve control modules are controlled from the safe zone on the input side by the switching signals (NPN, PNP) and provide digital outputs to switch actuators (solenoids, alarms) in Ex zone 0. Depending on the module, the output current is limited for the ignition protection groups IIC/IIB to 35 mA or 60 mA (only one channel). Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-SDI HDO-H-S (conrad.cz)

The ACT20X-HDI-SDO/ 2HDI-2SNO RNO/RNC isolating switch amplifiers are specially designed for recording NAMUR sensor signals and digital switching signals which originate from Ex zone 0. Switching relays, optionally available with NO or NC contacts, transfer output signals to the safe zone. Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-2HDI 2SDO-RNC-S (conrad.cz)

ACT20X is a product line of signal converters for the Ex zone. With 11 mm width per channel, these compact devices need little space in the electrical cabinet. The signal converters have been specifically developed for process automation applications in hazardous (Ex) and non-hazardous zones The ACT20X series is capable of processing all standard input signals (2-wire HART, NAMUR, RTD, thermocouple and DC signals) from Ex zone 0. Alternatively, it can provide digital and analogue signals to control the field devices located within the explosion risk zone. Faults and error messages can be forwarded via the integrated relay outputs. This helps identify errors quickly and increases system availability. The WI-Manager configuration software is based on FDT (Field Device Tool) technology. The software allows you to configure all ACT20X devices with your PC so that they can be custom-fit to a wide variety of process applications. Weidmüller provides a Device Type Manager (DTM) that can be used in any FDT-based frame. International approvals such as IECEx, ATEX, FM and UL allow for use around the world. ACT20X-2HDI 2SDO-RNO-S (conrad.cz)

The ACT20X-SDI-HDO/2SDI-2HDO valve control modules are controlled from the safe zone on the input side by the switching signals (NPN, PNP) and provide digital outputs to switch actuators (solenoids, alarms) in Ex zone 0. Depending on the module, the output current is limited for the ignition protection groups IIC/IIB to 35 mA or 60 mA (only one channel). Integrated alarm contacts issue an alert in the event of a malfunction; this makes troubleshooting easier and increases system availability. The rail mounted disconnect-switch amplifiers are optionally available in one- or two-channel versions. With 11 mm width per channel, the devices need little space in the electrical cabinet. ACT20X-2SDI-2HDO-S (conrad.cz)

Connection terminals for the ACT20X thermal modules for external cold-junction compensation ACT20X-CJC HTI-S PRT 21 (conrad.cz)

Connection terminals for the ACT20X thermal modules for external cold-junction compensation ACT20X-CJC HTI-S PRT 11 (conrad.cz)

Weidmüller ACT20X-HUI-SAO-P 2456200000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-HTI-SAO-P 2456180000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-HUI-SAO-LP-S 1318220000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-2SDI-2HDO-P 2456130000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-2HAI-2SAO-P 2456150000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-SAI-HAO-P 2456160000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-2HTI-2SAO-P 2456190000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-2SAI-2HAO-P 2456170000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-HDI-SDO-P 2456070000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-2HDI-2SDO-P 2456100000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Signálový měnič signálu Weidmüller ACT20M-AI-AO-E-S 1176010000, 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-SDI-HDO-L-P 2456110000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-SDI-HDO-H-P 2456120000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-HDI-SDO-RNO-P 2456050000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-2HDI-2SDO-RNO-P 2456080000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-2HDI-2SDO-RNC-P 2456090000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

Weidmüller ACT20X-HDI-SDO-RNC-P 2456060000 1 ks od výrobce Weidmüller v kategorii Měniče, ostatní za skvělou cenu u Conrada. (conrad.cz)

(fitvyziva.cz)

Převádí drát pro signály sítě v optických signály·10/100/1000 Base-TX do 1000Base-LX·Konektory: 1x RJ45, 1x SC Duplex·Dosah až 10km Mediakonvertor; návod pro rychlé spuštění; síťový zdroj; síťový adaptér; (conrad.cz)

Konektory: 1x RJ45, 1x ST Duplex·10/100/1000 Base-TX do 1000Base-SX·Vysoká kvalita a maximální zabezpečení proti selhání·Dosah až 0,5km Mediakonvertor; návod pro rychlé spuštění; síťový zdroj; síťový adaptér; (conrad.cz)

Udržuje standardy IEEE 802.3ab a IEEE 802.3z.·FX port lze přepínat mezi Force a automatický režim.·Přenosová vzdálenost až 0,5km skelnými vlákny (conrad.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)

(fitvyziva.cz)