zebra ram 246u ram mount

RAM mount, VESA100, C-size 1.5 inch ball, 4.75 SQ.

Objev podobné jako Zebra RAM-246U RAM Mount

RAM mount kit, for flexible mounting of the vehicle cradle/ printer, fits for: ZQ500 series.

Objev podobné jako Zebra AK17463-002 RAM mount kit

Jednolůžkový rám postele SHUMEE z borovicového masivu a překližky o rozměrech 69,5 × 125,5 × 205,5 cm. Disponuje čelem poskytujícím oporu pro sezení a je dodáván včetně roštu. Vhodný pro větší děti i dospělé, dostupný v černé matné barvě.

• Masivní konstrukce z borovicového dřeva a překližky pro dlouhou životnost
• Praktické čelo postele poskytující oporu pro sezení
• Dodáván včetně roštu, není třeba dokupovat zvlášť
• Černá matná barva a design SHUMEE se hodí do moderních interiérů

Objev podobné jako Rám postele černý masivní dřevo 120 × 200 cm, 810678 (810678)

24 diamantů a 24 spon do vlasů
slunečník s 6 žebry
dětské křesílko s motivem zebry
slunečník s osmi ocelovými žebry
závěsný slunečník s ocelovými žebry
dětská postýlka Elsa Zebra bílá mátová
slunečník TUCSON s ocelovými žebry
olejový radiátor s 11 žebry
plastové figurky lva, žirafy, slona a zebry
povlečení s motivy slona žirafy lva zebry
slunečník s 6 žebry a polyesterovým potahem
olejový radiátor s 9 žebry
olejový radiátor s 11 žebry a ventilátorem
čtvercový slunečník s 8 ocelovými žebry
dětské křesílko zebra bílá
měkké dětské sezení zebra motiv

Manželský rám postele SHUMEE z masivního borovicového dřeva s rozměry 100 × 140,5 × 195,5 cm. Součástí balení je rošt a čelo postele sloužící jako opora. Vhodný pro dvoulůžko s dekorem medově hnědé borovice.

• Masivní konstrukce z borovicového dřeva pro dlouhou životnost
• Čelo postele slouží jako praktická opora pro sezení
• Součástí balení je rošt, není třeba dokupovat zvlášť
• Medově hnědý dekor dřeva dodává teplý a přírodní vzhled

Objev podobné jako Rám postele medově hnědý masivní borovice 135 × 190 cm Double, 3103626 (3103626)

Jednolůžkový rám postele SHUMEE z borovicového dřeva, masivu a překližky s rozměry 77 × 108 × 208 cm. Součástí je rošt a čelo postele poskytující oporu. Dekor dřeva borovice v medově hnědé barvě.

• Vyrobeno z kvalitního borovicového dřeva, masivu a překližky
• Dodává se včetně roštu
• Čelo postele poskytuje pohodlnou oporu pro sezení
• Vhodný pro dospělé i větší děti

Objev podobné jako Rám postele medově hnědý masivní borovice 100 × 200 cm, 322189 (322189)

Zebra RAM Mount quick-release printer mount, fits for: ZQ630 series

Objev podobné jako Zebra RAM Mount Quick-Change Printer Mount

RAM Mount holder, incl.: 1x Twist Lock Suction Cup, 1x Diamond Base Adapter, 1x Double Socket Arm, fits for: vehicle cradles.

Objev podobné jako Zebra RAM-B-166U RAM Mount holder

TC8000 cart mount RAM 2,5'' Round Ball Base

Objev podobné jako Zebra TC8000 MNT-RAM-B202U cart mount RAM 2,5'' Round Ball Base

P-Series RAM Mount Kit, fits for: P4T, RP4T, QLn, ZQ600.

Objev podobné jako Zebra P1010338 RAM Mount

RAM mount, 12'' arm, fits for: VC80, VH10.

Objev podobné jako Zebra MT4302 RAM mount, 12'' arm

RAM-Mount basis plate, plate (dimensions: 2 x 3 inch), ball (dimensions: D - 2.25 inch), incl.: screws, fits for: VC80x, VC8300.

Objev podobné jako Zebra MT4510 RAM-Mount basis plate

MOUNT, XC6, RAM FORKLIFT MOUNTING KIT

Objev podobné jako Zebra 350025 Ram-mount

The RAM® 14" Pedestal Mount with 100mm & 75mm VESA Patterns - Gray (RAP-D11-14-V100-GRY) is a free-standing, 14-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, allowing for optimal viewing, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm and 100mm patterns for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Made in a light gray color, the mount blends seamlessly into clean, modern, and aesthetic environments where subtlety and professional appearance matter. Features 14-inch pedestal stand with 100mm & 75mm VESA patterns VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Colour - light gray Product dimensions - Height ... Unknown localization key: "more"

Objev podobné jako RAM Mounts 14" Pedestal Mount with 100 mm & 75 mm VESA Patterns - light gray

The RAM® 7" Pedestal Mount with 100mm & 75mm VESA Patterns - Gray (RAP-D11-7-V100-GRY) is a free-standing, 7-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, allowing for optimal viewing, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm and 100mm patterns for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Made in a light gray color, the mount blends seamlessly into clean, modern, and aesthetic environments where subtlety and professional appearance matter. Features 7-inch pedestal stand with 100mm & 75mm VESA patterns VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Colour - light gray Product dimensions - Height ... Unknown localization key: "more"

Objev podobné jako RAM Mounts 7" Pedestal Mount with 100mm & 75mm VESA Patterns - light gray

The RAM® 14" Pedestal Mount with 75mm VESA Pattern - Gray (RAP-D11-14-V75-GRY) is a free-standing, 14-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, allowing for optimal viewing, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm pattern for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Made in a light gray color, the mount blends seamlessly into clean, modern, and aesthetic environments where subtlety and professional appearance matter. Features 14-inch pedestal stand with 75mm VESA pattern VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Colour - light gray Product dimensions - Height from Base to Tilt Bolt 13.73", ... Unknown localization key: "more"

Objev podobné jako RAM Mounts 14" Pedestal Mount with 75 mm VESA Pattern - light gray

The RAM® 7" Pedestal Mount with 75mm VESA Pattern - Gray (RAP-D11-7-V75-GRY) is a free-standing, 7-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, allowing for optimal viewing, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm pattern for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Made in a light gray color, the mount blends seamlessly into clean, modern, and aesthetic environments where subtlety and professional appearance matter. Features 7-inch pedestal stand with 75mm VESA pattern VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Colour - light gray Product dimensions - Height from Base to Tilt Bolt 7.24", ... Unknown localization key: "more"

Objev podobné jako RAM Mounts 7" Pedestal Mount with 75 mm VESA Pattern - light gray

The RAM® 14" Pedestal Mount with 100 mm & 75 mm VESA Patterns (RAP-D11-14-V100) is a free-standing, 14-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, allowing for optimal viewing, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm and 100mm patterns for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Features 14-inch pedestal stand with 100mm & 75mm VESA patterns VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Product dimensions - Height from Base to Tilt Bolt 13.73", Base Width 3.8", Base Depth 3.8" Hole pattern - 100 x 100 mm VESA, 75 x 75 mm VESA Material(s) ... Unknown localization key: "more"

Objev podobné jako RAM Mounts 14" Pedestal Mount with 100 mm & 75 mm VESA Patterns

The RAM® 7" Pedestal Mount with 100mm & 75mm VESA Patterns (RAP-D11-7-V100) is a free-standing, 7-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, allowing for optimal viewing, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm and 100mm patterns for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Features 7-inch pedestal stand with 100mm & 75mm VESA patterns VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Product dimensions - Height from Base to Tilt Bolt 7.24", Base Width 3.8", Base Depth 3.8" Hole pattern - 100 x 100 mm VESA, 75 x 75 mm VESA Material(s) - High ... Unknown localization key: "more"

Objev podobné jako RAM Mounts 7" Pedestal Mount with 100 mm & 75 mm VESA Patterns

The RAM® 14" Pedestal Mount with 75mm VESA Pattern (RAP-D11-14-V75) is a free-standing, 14-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, allowing for optimal viewing, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm pattern for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Features 14-inch pedestal stand with 75mm VESA pattern VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Product dimensions - Height from Base to Tilt Bolt 13.73", Base Width 3.8", Base Depth 3.8" Hole pattern - 75 x 75 mm VESA Material(s) - High strength Composite

Objev podobné jako RAM Mounts 14" Pedestal Mount with 75 mm VESA Pattern

The RAM® 7" Pedestal Mount with 75mm VESA Pattern (RAP-D11-7-V75) is a free-standing, 7-inch pedestal that allows you to mount any RAM® powered dock or passive holder to create a workstation that maintains the mobility of your tablet. Designed for flexibility and stability, this solution features a 180-degree swivel base and 180-degree device tilt, positioning, and screen-sharing with co-workers or customers. Ideal for retail, hospitality, food service, and other point-of-sale or customer-interaction environments, this mount supports VESA 75mm pattern for broad device compatibility alongside RAM® docks and holders. A drill-down base ensures a secure, fixed installation - making it perfect for high-traffic or semi-permanent setups. Features 7-inch pedestal stand with 75mm VESA pattern VESA hole pattern supports connection to a wide variety of devices, RAM® docks, and RAM® holders Dock swivels 180 degrees and enables connected devices to tilt 180 degrees Made of high-strength composite and stainless steel hardware for durability and reliability in the most demanding environments Product dimensions - Height from Base to Tilt Bolt 7.24", Base Width 3.8", Base Depth 3.8" Hole pattern - 75 x 75 mm VESA Material(s) - High strength Composite

Objev podobné jako RAM Mounts 7" Pedestal Mount with 75 mm VESA Pattern

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDU Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHU Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2HU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PD2HU Form-Fit Holder for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25LU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2U:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PD2U Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHU Form-Fit Holder (Latch) for Zebra ET60/65

Zebra Back of Hand Mount, fits for: WS501

Objev podobné jako Zebra SG-WS5X-BHMT-02 Back of Hand Mount

Zebra back-of-hand mount with integrated trigger, for left-handed users, fits for: RS5100 / RS6100

Objev podobné jako Zebra back of hand mount

Zebra back of hand mount with integrated trigger, for left-handers, pack of 10 fits for: RS5100 / RS6100

Objev podobné jako Zebra Back of Hand Mount

Zebra back of hand mount with integrated trigger, for right-handed users, fits for: RS5100 / RS6100

Objev podobné jako Zebra Back of Hand Mount

Zebra Back of Hand Mount with integrated trigger, for right-handed users, pack of 10 fits for: RS5100 / RS6100

Objev podobné jako Zebra Back of Hand Mount

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

Handi-Mount, incl.: RAM Mount Arm, without Base Plate, fits for: ZQ600.

Objev podobné jako Zebra P1050667-033 Handi Mount

Handi-Mount incl.: RAM Mount Arm, Base Plate, fits for: ZQ600.

Objev podobné jako Zebra P1050667-032 Handi-Mount

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Frame and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22U:Compatible with accessoriesEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22U Form-Fit Holder (Latch) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PLU Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PD2U:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp- Right or NFC-RepeaterInput Connector: 5.5mm DCOutput ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PD2U Form-Fit Holder (Latch) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PDLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCOutput ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PDLU Form-Fit Holder (key-locking) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22LU:Compatible with accessoriesEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22LU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22LU Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 10“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE21PNLLU:Compatible with PowerPack batterieEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE21LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE21PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE21PNLLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE21PNLLU Form-Fit Holder (Latch) for Zebra ET40/45 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Lockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.This dock is not compatible with IntelliSkin.For IntelliSkin ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE20PDKLU Form-Fit Holder (key-locking) for Zebra ET40/45 (8")

This RAM Mounts EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: RoHS, WEEE, CE & UKCAAdditional informations: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20U.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE20PDU EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE21PKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged BootLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Frame, see RAP-INSERT-ZE21LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE21PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE21PKLU Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts Form-Fit (latch) holder is suitable for Zebra ET4x 8“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE20PNLLU:Compatible with PowerPack batterieEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged Frame (Boot)Input Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Boot, see RAP-INSERT-ZE20LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKNLL-ZE20PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE20PNLLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE20PNLLU Form-Fit Holder (Latch) for Zebra ET40/45 (8")