zebra keyboard

Keyboard, layout: US, IP65, fits for: L10

Objev podobné jako Zebra keyboard

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

dětská postýlka Elsa Zebra bílá mátová
slunečník TUCSON s ocelovými žebry
olejový radiátor s 11 žebry
plastové figurky lva, žirafy, slona a zebry
povlečení s motivy slona žirafy lva zebry
slunečník s 6 žebry a polyesterovým potahem
olejový radiátor s 9 žebry
olejový radiátor s 11 žebry a ventilátorem
čtvercový slunečník s 8 ocelovými žebry

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDU Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHU Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2HU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PD2HU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PD2HU Form-Fit Holder for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25LU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2U:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PD2U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PD2U Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHU Form-Fit Holder (Latch) for Zebra ET60/65

Dětské křesílko s motivem zebry je vyrobeno z měkkého materiálu a má snímatelný bavlněný potah, který lze prát. Doporučuje se jako oblíbený doplněk do dětského pokoje. Technické parametry zahrnují výšku opěradla cca 29 cm a šířku sedadla cca 25 cm.

• Měkký a pohodlný materiál pro děti
• Snímatelný a pratelný bavlněný potah
• Atraktivní design s motivem zebry
• Vhodné do dětského pokoje jako doplněk

Objev podobné jako New Baby Zebra dětské křesílko šedá

Compact 62 keys QWERTY keyboard for stand-alone operation of Zebra printers, 2-line LCD display, RS232 interface, direct power supply from the printer, EPL/ZPL support.

Objev podobné jako Zebra ZKDU-001-00 keyboard display unit ZKDU

Zebra AZERTY Keyboard Spare Elastomer fits for: VC8300

Objev podobné jako Zebra VC83KYBD-AZ-SP-01 Keyboard

22 cm USB VC80 cable for Keyboard. Typically used when keyboard is mounted away from the VC.

Objev podobné jako Zebra CBL-VC80-KBUS1-01, USB VC80 cable for Keyboard

Keyboard support bracket, Keyboard VESA: 75x75, AMPS, cradle VESA: 100 x 100, 75 x 75, fits for: ET60, ET65 vehicle cradles

Objev podobné jako Zebra KT-KYBDTRAY-ET6X-01 keyboard support bracket

Keyboard, 34 keys, Functional-Numeric, fits for: MC9300.

Objev podobné jako Zebra KYPD-MC9334FNR-01 keyboard, 34 keys

Keyboard, 43 keys, Functional-Numeric, fits for: MC9300.

Objev podobné jako Zebra KYPD-MC9343FN-01 keyboard, 43 keys

Keyboard, 53 keys, 5250-Layout, fits for: MC9300.

Objev podobné jako Zebra KYPD-MC93535250-01 keyboard, 53 keys 5250

Keyboard, 53 keys, Alpha-Numeric , fits for: MC9300.

Objev podobné jako Zebra KYPD-MC9353ANR-01 keyboard, 53 keys

Keyboard, 10 pcs., 58 keys, Alpha Numeric, fits for: MC9300.

Objev podobné jako Zebra KYPD-MC9358ANR-10 keyboard, 58 keys, 10 pcs

Keyboard, 58 keys, Alpha Numeric, fits for: MC9300.

Objev podobné jako Zebra KYPD-MC9358ANR-01 keyboard, 58 keys

Keyboard, 29 keys, Numeric, fits for: MC9300.

Objev podobné jako Zebra KYPD-MC9329NMR-01 keyboard, 29 keys

Keyboard, layout: QWERTY, incl.: Y-USB cable, fits for: VC70.

Objev podobné jako Zebra KYBD-QW-VC70F-S-1 Keyboard

Keyboard trey, incl.: tilting arms, screws, fits for: VC70.

Objev podobné jako Zebra KT-KYBDTRAY-VC70-3 keyboard trey

Keyboard protection grill, QWERTY/AZERTY, fits for: VC70.

Objev podobné jako Zebra KT-KYBDGRL1-VC70-R keyboard protection grill

Keyboard, heated, USB, cable length: 22 cm, fits for: VC80.

Objev podobné jako Zebra KYBD-QW-VC80-S-1 keyboard, USB, QWERTY

Keyboard trey, incl.: tilting arms, screws, fits for: VC80.

Objev podobné jako Zebra KT-KYBDTRAY-VC80-R keyboard trey

Keyboard, layout: AZERTY, IP66, order separately: connection cable, fits for: VC70, VC80.

Objev podobné jako Zebra KYBD-AZ-VC-01 keyboard

Keyboard, alphanumeric, incl.: mount for the right side, fits for: WT6000, WT6300

Objev podobné jako Zebra KYPD-WT6XANFASM-01 keyboard

Keyboard, iKey, layout: QWERTY, red backlit keys, AMPS mounting pattern

Objev podobné jako Zebra 420026 keyboard, iKey

Keyboard Bracket, order separately: scres, fits for: ET8X

Objev podobné jako Zebra CRD-ET8X-M-KBBK1-01 Keyboard Bracket

Keyboard, 2-in-1, layout: GER, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

Objev podobné jako Zebra KYB-ET8X-2IN1-DE1-01 keyboard, GER

Keyboard, 2-in-1, layout: ES, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

Objev podobné jako Zebra KYB-ET8X-2IN1-ES1-01 keyboard, ES

Keyboard, 2-in-1, layout: FR, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

Objev podobné jako Zebra KYB-ET8X-2IN1-FR1-01 keyboard, FR

2-in-1 Keyboard, 82 keys, 6 programmable keys, layout: Nordic, fits for: ET8X

Objev podobné jako Zebra KYB-ET8X-2IN1-NO1-01 2-in-1 Keyboard

Keyboard, 2-in-1, layout: UK, 82 keys, multi-color backlight, 6 additional programable keys, fits for: ET8X

Objev podobné jako Zebra KYB-ET8X-2IN1-UK1-01 keyboard, UK

Rugged 82 Key Keyboard, US-Layout QWERTY, for: ET8X

Objev podobné jako Zebra KYB-ET8X-2IN1-US1-01 Keyboard

Keyboard, layout: DE, IP65, fits for: L10

Objev podobné jako Zebra 420097 keyboard

Keyboard, layout: ES, IP65, fits for: L10

Objev podobné jako Zebra 420099 keyboard

Keyboard, layout: DE, IP65, fits for: L10

Objev podobné jako Zebra 420098 keyboard

Keyboard, layout: UK, IP65, fits for: L10

Objev podobné jako Zebra 420096 keyboard

Attachable keyboard, Layout: US, fits for: ET40/45 (10")

Objev podobné jako Zebra 3PTY-GJ-7160-1789-00 attachable keyboard, US

Attachable keyboard, Layout: FR, fits for: ET40/45 (10")

Objev podobné jako Zebra 3PTY-GJ-7160-1789-03 attachable keyboard, FR

Attachable keyboard, Layout: SP, fits for: ET40/45 (10")

Objev podobné jako Zebra 3PTY-GJ-7160-1789-04 attachable keyboard, SP

Attachable keyboard, Layout: UK, fits for: ET40/45 (10")

Objev podobné jako Zebra 3PTY-GJ-7160-1789-01 attachable keyboard, UK

Attachable keyboard, Layout: DE, fits for: ET40/45 (10")

Objev podobné jako Zebra 3PTY-GJ-7160-1789-02 attachable keyboard, DE

2-in-1 attachable rugged Keyboard, layout: DE, 78 keys, with multi-color dimmable backlight, fits for: ET60, ET65

Objev podobné jako Zebra KYB-ET6X-2IN1-DE1-01 2-in-1 Keyboard, DE

2-in-1 attachable rugged Keyboard, layout: ES, 78 keys, with multi-color dimmable backlight, fits for: ET60, ET65

Objev podobné jako Zebra KYB-ET6X-2IN1-ES1-01 2-in-1 Keyboard, ES

2-in-1 attachable rugged Keyboard, layout: FR, 78 keys, with multi-color dimmable backlight, fits for: ET60, ET65

Objev podobné jako Zebra KYB-ET6X-2IN1-FR1-01 2-in-1 Keyboard, FR