richter loxx transmitter holder

Držák na vysílačku Toto pouzdro pro kytarovou/baskytarovou vysílačku je výsledkem spolupráce dvou renomovaných německých firem – Richter a Loxx. Kdo tyto firmy zná, jistě ví, že o kvalitu a funkčnost jejich produktů se opravdu nemusí obávat. Pouzdro je vyrobeno z prémiové, extra robustní kůže a vybaveno pohodlným a bezpečným rychloupínacím systémem, který stačí nainstalovat na váš oblíbený popruh. Pouzdro je vhodné pro vysílačky s délkou do 11 cm. Součástí balení je kromě samotného pouzdra také sada tří suc

Objev podobné jako Richter LOXX Transmitter Holder

Poštovní schránka Richter Czech BK.38.R.AM je venkovní ocelový model určený k zazdění do sloupku nebo zdi. Disponuje rozměry 11 × 28,5 × 53 cm a antracitovou barvou. Součástí je jmenovka pro označení jména nebo firmy.

• Kvalitní ocelová konstrukce pro venkovní použití
• Stylový antracitový design vhodný k zazdění
• Integrovaná jmenovka pro osobní označení
• Odolná povrchová úprava chránící obsah

Objev podobné jako Richter Czech BK.38.R.AM (0824-41125 )

Dveřní kování Richter RK.E16.BERGAMO.WC.AS kombinuje zamakovou konstrukci s madlem z černého ořechu ve starostříbrné povrchové úpravě. Je vybaveno vratnou pružinou a dodává se se dvěma sadami montážních šroubů pro dveře tloušťky 32–58 mm. WC varianta obsahuje čtyřhran s redukcí pro zvýšenou univerzálnost.

• Kombinace robustního zamaku s madlem z přírodního černého ořechu ve starostříbrné úpravě
• Vratná pružina zajišťující plynulý a pohodlný chod kliky
• Dvě sady montážních šroubů pro dveře tloušťky 32–58 mm bez nutnosti zkracování
• WC varianta obsahuje čtyřhran 6 × 6 mm s redukcí 6/8 mm pro univerzální použití

Objev podobné jako Richter Ekonomické kování RK.E16.BERGAMO.WC.AS

sejf Richter 45 litrů s nouzovým klíčem
šedý sejf RICHTER RS.30.K s vnitřní policí
samozamykací zámek Richter Z.302
Richter kování WC varianta
Richter RS.23.DE.FIN ocelový sejf
Richter sejf 32 litrů černý
Richter klika RK.S2.LIBERA.CE
Richter dveřní kování Bergamo starostříbrná
kompaktní bezpečnostní schránka Richter KB.G13
pokladnička Richter LC.250.CE 25 cm
Richter EXR.30/35.NI cylindrická vložka 30+35 mm
Richter EURO XStar vložka s identifikační kartou
Richter EXR.30/35K.NI vložka s 6 klíči
poštovní schránka Richter BK.38.N s montážním materiálem
šedý sejf RICHTER RS.25.FK
kompaktní požární skříňka Richter

Ocelové dveřní kování Richter RK.LOPAR.WC.CE v matné černé barvě je ekonomické a praktické řešení pro interiérové dveře. Je vybaveno vratnou pružinou klik a dodává se s montážní sadou pro dveře tloušťky 38–60 mm. WC varianta obsahuje čtyřhran 6×6 mm s redukcí pro univerzální použití.

• Moderní matná černá povrchová úprava odolná proti opotřebení
• Vratná pružina zajišťující hladký a pohodlný chod klik
• Univerzální montáž pro dveře tloušťky 38–60 mm se dvěma sadami šroubů
• WC varianta s čtyřhranem 6×6 mm a redukcí 6/8 mm

Objev podobné jako Richter Ocelové kování RK.LOPAR.WC.CE

Dveřní kování Richter RK.E16.BERGAMO.PZ.AS kombinuje zamakovou konstrukci s madlem z černého ořechu ve starostříbrné úpravě. Konstrukce obsahuje vratnou pružinu pro plynulý chod a je dodávána se dvěma sadami montážních šroubů pro dveře tloušťky 32–58 mm. Balení zahrnuje kompletní montážní sadu s vrtací šablonou a návodem.

• Kombinace robustního zamaku s madlem z přírodního dřeva (černý ořech) ve starostříbrném provedení
• Vratná pružina zajišťující plynulý a pohodlný chod kliky
• Dvě sady montážních šroubů bez nutnosti zkracování pro dveře tloušťky 32–58 mm
• Odolný materiál s přesným opracováním zaručujícím dlouhou životnost

Objev podobné jako Richter Ekonomické kování RK.E16.BERGAMO.PZ.AS

Dveřní kování Richter RK.E16.BERGAMO kombinuje zamakový korpus s madlem z černého ořechu ve starostříbrné úpravě. Je vybaveno vratnou pružinou a dodáváno jako kompletní sada včetně montážních šroubů, šablony a návodu. Je určeno pro dveře o tloušťce 32–58 mm.

• Elegantní kombinace kovového povrchu starostříbrné barvy a madla z přírodního černého ořechu.
• Vratná pružina zajišťuje plynulý a pohodlný chod kliky.
• Dvě sady montážních šroubů nevyžadují zkracování, usnadňují instalaci na dveře tloušťky 32–58 mm.
• Odolný zamakový materiál a přesné opracování zaručují dlouhou životnost.

Objev podobné jako Richter Ekonomické kování RK.E16.BERGAMO.BB.AS

Zámky na popruh Německé bezpečnostní zámky na popruh Loxx představují maximálně praktické a funkční řešení pro vaši kytaru a živá vystoupení. Zámky Loxx jsou vyráběny společností Schaeffertec , která vyrábí zámky pro automobilový či lodní průmysl již od roku 1928. 100% nerezové a bezpečné! Zámky Loxx používají například kytaristé Richard Z. Kruspe (Rammstein), Axel Ritt (Grave Digger) nebo Victor Smolsky (Almanac, ex

Objev podobné jako Loxx Sophia - Antique Copper

Zámky na popruh Německé bezpečnostní zámky na popruh Loxx představují maximálně praktické a funkční řešení pro vaši kytaru a živá vystoupení. Zámky Loxx jsou vyráběny společností Schaeffertec , která vyrábí zámky pro automobilový či lodní průmysl již od roku 1928. 100% nerezové a bezpečné! Zámky Loxx používají například kytaristé Richard Z. Kruspe (Rammstein), Axel Ritt (Grave Digger) nebo Victor Smolsky (Almanac, ex

Objev podobné jako Loxx Black

FM Transmitter - do auta s USB, Bluetooth, displej, hudební přehrávač a bezdrátové připojení, 2× USB port, maximální kapacita USB flash disku 64 MB, vstupní napětí 12 V, černá barva Bluetooth FM transmitter Scosche je vychytávka pro starší autorádia, na kterých si chcete přehrát hudbu z různých zdrojů, aniž byste si museli koupit nové rádio. Pro připojení flash disku je vybaven 2 USB porty. FM transmitter do auta Scosche má navíc i displej, a vy tak uvidíte potřebné informace. Zvládne přečíst a reprodukovat formáty MP3 a WMA. Zásadní přednosti FM transmitteru Scosche Bluetooth handsfree a FM transmitter 3v1 Bluetooth FM transmitter Scosche vám přehraje hudbu z různých zdrojů Zařízení je vybaveno Bluetooth Nechybí mu ani 2 USB porty FM transmitter do auta Scosche má vstupní napětí 12 V Má přehledný displej Bez problémů přehraje formáty MP3 a WMA Barva FM transmitteru Scosche je černá

Objev podobné jako Scosche Bluetooth handsfree a FM transmitter 3v1 (BTFM4)

FM Transmitter - do auta s USB, Bluetooth a čtečkou paměťových karet, displej, FM rádio a bezdrátové připojení, 2× USB port, možnost vložení paměťové karty do velikosti 128 GB, černá barva Bluetooth FM transmitter Energy Sistem vám pomůže s přehráváním hudby na starších autorádiích, aniž byste museli investovat do nového rádia. K připojení flash disku slouží 2 USB porty. FM transmitter vám dále nabídne čtečku paměťových karet. FM transmitter do auta Energy Sistem vás zaujme svým displejem zobrazujícím veškeré potřebné informace. Přehraje formáty MP3, FLAC a WAV. Rozměry FM transmitteru Energy Sistem jsou 100 × 70 × 41 mm (V׊×H). Hlavní vlastnosti FM transmitteru Energy Sistem Car Transmitter FM XTRA Bluetooth Bluetooth FM transmitter Energy Sistem vám zpestří obyčejnou jízdu autem Zařízení s funkcí Bluetooth Součástí vybavení jsou 2 USB porty Dále nabízí čtečku paměťových karet S přehledným displejem Poradí si s formáty MP3, FLAC a WAV Barva FM transmitteru...

Objev podobné jako Energy Sistem Car Transmitter FM XTRA Bluetooth (455249)

Autonabíječka FM Radio Transmitter Autonabíječka s PD 3.0 USB-C 30W, QC 3.0 USB-A 18W, Bluetooth 5.3 a FM radio transmitter ve stříbrné barvě je moderní multifunkční zařízení pro nabíjení a zábavu na cestách. S vysokým výkonem a pokročilými funkcemi vám poskytne maximální pohodlí při cestování a zajistí, že vaše zařízení budou vždy nabitá. Hlavní vlastnosti: Výkonné nabíjení: Nabíječka disponuje USB-C portem s technologií PD 3.0 (30W) a USB-A portem s technologií QC 3.0 (18W), což umožňuje rychlé nabíjení vašich zařízení. Bluetooth 5.3: Bezdrátové připojení k vašemu telefonu pro přehrávání hudby, handsfree hovory a ovládání přímo z nabíječky. FM transmitter: Umožňuje vysílání hudby z vašeho telefonu přes autorádio, což zajišťuje vysokou kvalitu zvuku a snadné propojení s autorádiem. Kompaktní design: Elegantní a stylové provedení ve stříbrné barvě, které dokonale zapadne do interiéru každého vozu. Víceúčelové použití: Kromě nabíjení je zařízení vybaveno funkcemi pro přehrávání hudby, volání handsfree a vysílání zvuku přes FM rádio. Specifikace: USB-C (PD 3.0): 30W pro rychlé nabíjení kompatibilních zařízení USB-A (QC 3.0): 18W pro rychlé nabíjení Bluetooth: Verze 5.3 pro stabilní připojení a kvalitní přenos zvuku FM radio transmitter: Přenos zvuku přes frekvence FM do vašeho autorádia (87.5 Mhz-108.0 Mhz. Rozsah frekvencí, na kterých lze naladit FM ... Unknown localization key: "more"

Objev podobné jako WG - Nabíječka do auta, Transmitter FM, USB-A QC 3.0 18W + USB-C PD 30W, stříbrná

FM transmitter s bluetooth připojením do auta, 2x USB + handsfreeBluetooth FM transmitter – hudba, nabíjení a handsfree v jednom. Tento Bluetooth FM transmitter umožňuje bezdrátové přehrávání hudby z mobilních zařízení, MP3 přehrávačů nebo USB disků (až 64 GB). Disponuje LED displejem, dvěma USB porty (5V/2.4A + 5V/1A) pro rychlé nabíjení a podporou AUX audio vstupu. Umožňuje HiFi stereo přenos s frekvenčním rozsahem 87,5 – 108 MHz a podporuje formáty MP3/WMA/A2DP. Napájení 12–24V, ideální pro osobní i nákladní vozy.bluetooth FM transmitter pro přehrání hudby z multimediálních zařízení, mp3 přehrávač, autonabíječka + handsfreevstup: 12-24VLED displej2 × USB portvýstup 1: DC 5V/2.4A, Výstup 2: DC 5V/1AUSB disk: max. 64GBformát hudby: MP3/WMA, podpora A2DP, HiFi stereo systemfrekvence FM pásma: 87,5 - 108MHzAUX audio vstup

Objev podobné jako Solight FM transmitter s bluetooth připojením do auta, 2x USB + handsfree BT02

FM Transmitter - do auta s USB, Bluetooth a čtečkou paměťových karet, mikrofon, handsfree, USB nabíjení a bezdrátové připojení, 2× USB port, Bluetooth 5,0, obsah balení nabíječka, vstupní napětí 12 V, černá barva Bluetooth FM transmitter JOYROOM je ideálním nástrojem, díky kterému si budete moct na starších autorádiích poslechnout vaši oblíbenou hudbu, aniž byste si museli do auta pořizovat nové rádio. Zařízení dostalo do výbavy technologii Bluetooth 5.0 pro jednoduché přehrávání hudby z telefonu či tabletu. Pro připojení flash disku je opatřen 2 USB porty. USB konektor využijete i jako nabíječku pro váš telefon. Jako další vymoženost vám FM transmitter nabízí čtečku paměťových karet. Pro snadné a rychlé vyřízení telefonních hovorů je zařízení vybaveno funkcí handsfree. Integrovaný mikrofon se pak postará o co nejkvalitnější přenos hovoru. Součástí balení je nabíječka. Hlavní vlastnosti FM transmitteru Joyroom FM Transmitter autonabíječka 2x USB QC 18W 3A,...

Objev podobné jako Joyroom FM Transmitter autonabíječka 2x USB QC 18W 3A, černá (JOY07442)

WG - Nabíječka do auta s FM Transmitterem Praktická a multifunkční, WG nabíječka do auta je ideální společník pro každou cestu. FM Transmitter Přenášejte hudbu z flash disku přímo do autorádia pomocí FM signálu. Rychlé nabíjení Díky podpoře Quick Charge 3.0 nabíjí vaše zařízení rychle a efektivně. Maximální výkon S výstupem 18W je vaše zařízení vždy plně nabitý. Bezdrátová technologie Bluetooth 5.3 umožňuje bezdrátové připojení a handsfree hovory. LED displej LED displej pro snadné ovládání a přehled o stavu zařízení. Specifikace: Vstup: 12V-24V Výstup: 1x USB-A pro flash disk, 1x USB-A QC 3.0 (18W) Barva: Stříbrná Obsah balení: Autonabíječka s FM transmitterem Manuál Poslechněte si hudbu z různých zdrojů a užívejte si pohodlnou jízdu s WG nabíječkou do auta.

Objev podobné jako WG - Nabíječka do auta, Transmitter FM, QC 3.0, stříbrná

FM transmitter pracuje jako nabíječka, handsfree sada a hudební přehrávač v jednom. Snadno tak lze nabíjet zařízení pomocí USB rozhraní, zároveň poslouchat hudbu z paměťové karty a v neposlední řadě telefonovat. Spárování s mobilním telefonem je řešeno pomocí Bluetooth. Pro telefonování je zařízení opatřeno integrovaným mikrofonem, zvuk hovoru je přenášen do rádia. Transmitter je vybaven LCD displejem a ovládacími tlačítky pro snadnou obsluhu funkcí. Tělo je úhlově nastavitelné. Zařízení je kompatibilní se všemi 12/24V zásuvkami cigaretového zapalovače v osobních i nákladních automobilech. Technické údaje: Napájení: 12 / 24V USB výstup: 5V Příkon: 45 mA (max) Příkon: (stand-by) 25 mA (max) Bluetooth verze: (protokol) 4,2 + EDR (A2DP) RF výstup: 4 dbm Dosah vysílání: 5 m SNR: 85 dbm Frekvence: 20 hZ ~ 20 KhZ Max. kapacita: SD / USB 32 Gb Obsah balení: 1 x transmitter

Objev podobné jako Compass 93218 Hands free FM transmitter MULTI

FM Transmitter - výstupy USB-C a USB-A, Bluetooth 5.0, čtečka Micro SD karet, mikrofon, displej, měřič napětí, handsfree, hudební přehrávač, ovládací tlačítko pro výběr frekvence / hlasitost zvuku, USB-C 18 W, nabíjení s podporou PD a QC3.0, max. velikost paměťové karty a max. kapacita USB flash disku 32 GB, vstupní napětí 12 a 24 V Výběr značky AlzaPower AlzaErgo AlzaGuard Blackmont Eternico Ferrida La Proromance AlzaCafé Perfektně vybavený FM transmitter s podporou rychlonabíjení Hudební přehrávač, nabíječka, měřič napětí či handsfree. To vše nabízí parádně vybavený FM Transmitter AlzaPower F100, který je skvělou volbou pro každého, kdo chce snadno a rychle do svého automobilu přidat multimediální funkce. Stačí vám k tomu jediné – volná cigaretová zástrčka...

Objev podobné jako AlzaPower FM Transmitter F100 černý (APW-FMTV1)

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PHU Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PDHU Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON12PLU Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PDU Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PHLU Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PDHLU Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

3mk Steel Bike Holder™ - Držák na kolo pro vaše dobrodružství Bezpečně projíždějte město i krajinu s naším spolehlivým držákem na kolo. Odolnost, kterou oceníte Držák 3mk Steel Bike Holder™ je symbolem odolnosti. Je vyroben z kvalitního hliníku a nerezové oceli. Vašemu smartphonu na míru Držák je připraven na každý rozměr dobrodružství. Montáž zařízení o šířce 60-90 mm je možná. Stabilita je základ Užijte si jízdu bez vibrací s 3mk Steel Bike Holder™. Telefon zůstává stabilní i při těch nejnáročnějších expedicích. Perfektní pohled Úplné nastavení polohy držáku umožňuje upravit pozorovací úhel telefonu tak, abyste se mohli plně soustředit na cestu. Styl, který upoutá Design držáku 3mk Steel Bike Holder™ kombinuje funkčnost s elegancí. Každý držák zdobí logo 3mk a náš charakteristický vzor. Přidejte se k elitnímu klubu Vyberte si 3mk Steel Bike Holder™ a zažijte jízdu na zcela nové úrovni. Objednejte nyní a pociťte rozdíl.

Objev podobné jako 3mk držák na kolo - Steel Bike Holder

ERGOTRON THIN CLIENT CPU HOLDER, BLACK TEXTURED, držák pro tenkého klienta, kompatibilní s rameny a držáky This versatile holder offers an easy method for integrating a thin client or small computer into your workspace. The universal design adapts to the dimensions of the box, while its mounting interface attaches to a variety of surfaces: a VESA plate, directly to a desk, clamped to a pole or fastened to Ergotron Wall Track. The Thin Client Mount is not just for thin clients; it’s perfect for small CPUs, the Mac mini, or other peripherals. Extremely versatile: Includes hardware for attachment to several surfaces and Ergotron mounts‡ Size-adjustable holder fits a wide range of small computers Accommodates most all thin clients on the market Perfect holder for Mac mini from Apple® (compatible with all generations) Efficiently integrates a small computer into a display-mount configuration, creating a complete workstation solution Universal VESA interface attaches to any VESA mount that includes a 100 or 75 mm hole pattern Steel construction for strength and durability Saves space Part Number: 80-107-200 Description: Thin Client Mount (black) Includes holder, mounting hardware, mounting pads, strap ‡ Mounting Options: VESA mount; between monitor and VESA plate interfaces Pole with diameter ... Unknown localization key: "more"

Objev podobné jako ERGOTRON THIN CLIENT CPU HOLDER, BLACK TEXTURED, držák pro tenkého klienta, kompatibilní s rameny a držáky

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE20PU GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE21PDU GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PDU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PHLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PHLU Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PLU Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 with Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PLU:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with KeysInput Connector: USB-A Input Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE24PLU Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PHU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PHU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PHU Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 without Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PL-1U:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with keyInput Connector: USB-AInput Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PL-1U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE24PL-1U Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PDU Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PD2U GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PDKLU Form-Fit Holder (Key-Locking) for Getac ZX10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDHLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PDHLU Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDHU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDHU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PDHU Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PDLU Form-Fit Holder (Key-Locking) for Zebra MC9300/9400

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE21PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2U: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC & USB-A Connector