ram mounts tab tite bracket

RAM Mounts Tab-Tite Bracket 10-11 Inch Tablets / Panasonic Toughpad FZ-G1 AMPS Mount, Screw Set

Objev podobné jako RAM Mounts Tab-Tite Bracket

RAM Mounts Tab-Tite Universal Mounting Bracket for RAM GDS Keyboard - AMPS Mount, Screw Set

Objev podobné jako RAM Mounts Tab-Tite Universal Mounting Bracket

RAM Mounts Tab-Tite End Caps for Apple iPad 1-4 (in LifeProof & Lifeedge Protective Cases) - Screw Set

Objev podobné jako RAM Mounts Tab-Tite End Caps

tvrdé pouzdro Samsung Tab A8 2021
elegantní kryt pro Galaxy Tab A8
Quercetti Fantacolor Tab Basic mix
ochranná fólie Samsung Galaxy Tab S6 Lite celé tělo
originální zavírací pouzdro Samsung Galaxy Tab A7
šedé pouzdro pro Samsung Tab A7
pouzdro EF-BT500PJEGEU pro Galaxy Tab A7
ochranná folie Paper Feeling Samsung Galaxy Tab S9
ochranné sklo pro Samsung Galaxy Tab S10+
ochranné sklo 0.33 mm pro Galaxy Tab S9 FE+
Quercetti Fantacolor Tab Basic
barové židle s kovovým rámem a tkaninou Babyface
rozkládací gauč s kovovým rámem
židle s kovovým rámem a chromovými nohami
boho stylové jídelní židle s kovovým rámem
barové židle s kovovým rámem a umělou kůží

RAM Mounts Universal Laptop Bracket for Vehicles - Vehicle Base, Double Swivel Arm, Tough-Tray Bracket

Objev podobné jako RAM Mounts Universal Laptop Bracket

RAM Mounts Quick Release Bracket for Zebra ZQ320 Series - 2-Bolt AMPS Mounts

Objev podobné jako RAM Mounts Quick Release Bracket

RAM Mounts Quick Release Bracket for Zebra ZQ511 Series - 2-Bolt AMPS Mounts

Objev podobné jako RAM Mounts Quick Release Bracket

RAM Mounts Form-Fit Bracket for Honeywell RT10 Tablets - VESA 75x75 Mounts

Objev podobné jako RAM Mounts Form-Fit Bracket

RAM Mounts Universal Scanner Bracket (Composite) - Diamond Side Attachment (Trapezoid), Screw Set, in Poly Bag

Objev podobné jako RAM Mounts Universal Scanner Bracket

RAM Mounts Tough-Dock Bracket for Zebra ET4x 10 Inch Tablets in Zebra Protective Frame - lockable, power connection 5.5 mm jack plug, dual USB-A, AMPS and VESA mount

Objev podobné jako RAM Mounts Tough-Dock Bracket

RAM Mounts Tough-Dock Bracket for Zebra ET4x 10 inch tablets in Zebra protective frame - power connection 5.5 mm jack plug, dual USB-A, AMPS and VESA mount

Objev podobné jako RAM Mounts Tough-Dock Bracket

RAM Mounts X-Grip Bracket for Tablets (10 inches) - AMPS Connection

Objev podobné jako RAM Mounts X-Grip Bracket

RAM Mounts Form-Fit Bracket for Getac ZX10 - lockable, 4-bolt AMPS and VESA mount

Objev podobné jako RAM Mounts Form-Fit Bracket

RAM Mounts Form-Fit Bracket for Getac ZX70 - lockable, temp module compatible, 4-bolt AMPS mount

Objev podobné jako RAM Mounts Form-Fit Bracket

RAM Mounts Form-Fit Bracket for Getac ZX70 - lockable, NFC reach compatible, 4-bolt AMPS mount

Objev podobné jako RAM Mounts Form-Fit Bracket

RAM Mounts X-Grip Bracket for Tablets (12 inches) - AMPS Connection

Objev podobné jako RAM Mounts X-Grip Bracket

RAM Mounts X-Grip Bracket for Smartphones Small to 82.6mm Width - B-Ball

Objev podobné jako RAM Mounts X-Grip Bracket

RAM Mounts Universal Mounting Bracket (Composite) for Small Electronic Devices - Diamond Connection (Trapezoid), Screw Set, in Poly Bag

Objev podobné jako RAM Mounts Universal Mounting Bracket

RAM Mounts Universal Tab-Tite Mounting Bracket for Panasonic FZ-G2 & FZ-A3 - AMPS Mounts

Objev podobné jako RAM Mounts Universal Tab-Tite Mounting Bracket

RAM Mounts Universal Tab-Lock Bracket (lockable) for Panasonic Toughpad FZ-G1 - AMPS mount, screw set

Objev podobné jako RAM Mounts Universal Tab-Lock Bracket

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, Tab S9 & Tab S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 35 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM78CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ in IntelliSkin Protective Sleeve - USB-C Power Supp

The RAM® Safe-Case™ for Samsung Galaxy Tab S9 & S9 FE (RAM-TE-SAM86) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S9 & S9 FE, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button—enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S9 & S9 FE Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 12.02", Overall Width 7.84", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objev podobné jako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab S9 & S9 FE - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Galaxy Tab S9 & S9 FE - Gray (RAM-TE-SAM86-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S9 & S9 FE, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S9 & S9 FE Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab S9 & S9 FE - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Samsung Galaxy Tab S10 & S10+ (RAM-TE-SAM87) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S10 & S10+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S10 & S10+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 13.24", Overall Width 8.61", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objev podobné jako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab S10 & S10+ - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Galaxy Tab S10 & S10+ - Gray (RAM-TE-SAM87-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab S10 & S10+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab S10 & S10+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Safe-Case™ for Samsung Galaxy Tab S10 & S10+ - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Samsung Galaxy Tab A9+ (RAM-TE-SAM88) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab A9+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab A9+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 12.13", Overall Width 7.95", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objev podobné jako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab A9+ - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Galaxy Tab A9+ - Gray (RAM-TE-SAM88-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab A9+, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab A9+ Precision cutouts for ports, buttons & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - Overall Height 12.13", Overall Width 7.95", ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Safe-Caseâ„¢ for Samsung Galaxy Tab A9+ - Key-Lock, several Hole Pattern, light gray

The RAM® Safe-Case™ for Samsung Tab Active5 & 3 (RAM-TE-SAM99) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab Active5/3, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab Active5/3 Precision cutouts for ports, buttons, & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Product dimensions - Overall Height 10.47", Overall Width 6.35", Overall Thickness 0.79" Material(s) - Powder Coated Steel

Objev podobné jako RAM Mounts Safe-Caseâ„¢ for Samsung Tab Active5 & 3 - Key-Lock, several Hole Pattern

The RAM® Safe-Case™ for Samsung Tab Active5 & 3 - Gray (RAM-TE-SAM99-GRY) is a rugged, modular enclosure designed for high-security environments. Built from durable two-piece steel, this key-locking tablet case protects against theft, tampering, and tough environmental conditions - ideal for demanding field or industrial applications. Custom-fit for the Samsung Galaxy Tab Active5/3, the Safe-Case™ features precision cutouts for full access to the device’s lock button, USB-C port, and rear camera. Ventilation slots and speaker openings maintain device functionality without compromising protection. The smooth gray finish not only blends well into professional and industrial settings but also adds a clean, modern aesthetic. The enclosure features versatile mounting options with integrated hole patterns for flush mounting, compatibility with RAM® double ball mounts, or 75x75mm VESA stands. For added docking functionality, the Safe-Case™ supports the installation of a GDS® Uni-Conn™ button - enabling rear pogo pin charging when paired with any compatible GDS® dock. Features Key-locking, 2-piece enclosure for Samsung Galaxy Tab Active5/4 Precision cutouts for ports, buttons, & camera Secure to RAM® ball mounts with VESA and AMPS pattern; or flush mount Made of high-strength steel for ultimate durability Colour - light gray Product dimensions - Overall Height 10.47", Overall Width ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Safe-Caseâ„¢ for Samsung Tab Active5 & 3 - Key-Lock, several Hole Pattern, light gray

This RAM Mounts GDS IntelliSkin Next Gen protective sleeve is designed for the Samsung Galaxy Tab Active3 and offers reliable protection combined with convenient charging functionality.The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use.This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available.Thanks to its thoughtful design, all tablet functions remain fully accessible: the camera, buttons, and ports can still be used without restriction.The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations, making it ideal for professional use – whether in vehicles, at the workplace, or on the move.Product features RAM Mounts RAM-GDS-SKIN-SAM74-NG:Compatible with GDS DocksHolder for Stylus PenContinued access to camera and buttonsCharging functionEasy insertion and removalInput Connector: USB-C 2.0Transfer Speed:Up to USB 3.1 @ 5Gbps (via D-Shape Contacts*)Up to USB 2.0 @ 480Mbps (via External USB-C Port)Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations.This product will not support the "No ... Unknown localization key: "more"

Objev podobné jako RAM Mounts IntellìSkin Next Gen for Samsung Galaxy Tab Active3 - GDS-Technology

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS IntelliSkin Hard Case protective sleeve is designed for the Samsung Galaxy Tab Active3 & Active5 and offers reliable protection combined with convenient charging functionality. The integrated GDS connector is located within the inner frame of the case, allowing the device to be charged or continuously powered even while in use. This IntelliSkin also features an external USB-C port, so that your device can be plugged in, even when a GDS Dock is not available. Thanks to its thoughtful design, all tablet functions remain fully accessible: the camera, buttons, and ports can still be used without restriction. The IntelliSkin case is compatible with a wide range of GDS mounting systems and docking stations, making it ideal for professional use – whether in vehicles, at the workplace, or on the move. Product features RAM Mounts RAM-GDS-SKIN-SAM89-HC: Compatible with GDS Docks Holder for Stylus Pen Continued access to camera and buttons Charging function Easy insertion and removal Input Connector: USB-C 2.0 Transfer Speed: Up to USB 3.1 @ 5Gbps (via D-Shape Contacts*) Up to USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer ... Unknown localization key: "more"

Objev podobné jako RAM Mounts IntellìSkin Hard Case for Samsung Galaxy Tab Active3 & Active5 - External USB-C Port - GDS-Technology

RAM Mounts Bracket for Honeywell CT40/45/47 - 2-Bolt AMPS Mounts

Objev podobné jako RAM Mounts Bracket

RAM Mounts Form-Fit Mounting Bracket for Panasonic FZ-A3 - Power Connection, AMPS 4-Hole / VESA 75x75 Mounts

Objev podobné jako RAM Mounts Form-Fit Mounting Bracket

RAM Mounts Form-Fit Mounting Bracket for Zebra TC73 & TC78 - 2-Bolt AMPS Mounts

Objev podobné jako RAM Mounts Form-Fit Mounting Bracket

RAM Mounts Form-Fit Mounting Bracket for Zebra ET5x 10.1 Series - AMPS 4-Bolt / VESA 75x75 Mounts

Objev podobné jako RAM Mounts Form-Fit Mounting Bracket

RAM Mounts Form-Fit Mounting Bracket for Zebra TC53 & TC58 - 2-Bolt AMPS Mounts

Objev podobné jako RAM Mounts Form-Fit Mounting Bracket

RAM Mounts Form-Fit Mounting Bracket for Zebra ET60 / ET65 Tablets - 4-Hole AMPS & VESA Mounts

Objev podobné jako RAM Mounts Form-Fit Mounting Bracket

RAM Mounts Quick Release Mounting Bracket for Zebra ZQ310 Series - 2-Bolt AMPS Mounts

Objev podobné jako RAM Mounts Quick Release Mounting Bracket

RAM Mounts Quick Release Mounting Bracket for Zebra ZQ521 Series - 2-Bolt AMPS Mounts

Objev podobné jako RAM Mounts Quick Release Mounting Bracket

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads is designed for the Samsung Galaxy Tab A9+ and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab A9+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM88-TCB: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM88-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab A9+ - Rear Pogo-Pads - External USB-C - GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab A9+ and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab A9+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM88-TCB-GRY: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Colour - light gray Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM88-TCB-GRY is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab A9+ - GDS-Technology, Rear Pogo-Pads, External USB-C, light gray

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab Active3 & Active5 and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab Active3 & Active5 is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM93-TCB: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM93-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab Active3 & Active5 - Rear Pogo-Pads - External USB-C - GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab Active3 & Active5 and and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab Active3 & Active5 is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM93-TCB-GRY: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Colour - light gray Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM93-TCB-GRY is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab Active3 & Active5 - GDS-Technology, Rear Pogo-Pads, External USB-C, light gray

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab S9 FE+, S9+ & S10+ and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab S9 FE+, S9+ & S10+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM96-TCB: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM96-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab S9 FE+/S9+/S10+ - Rear Pogo-Pads, External USB-C, GDS-Technology

This RAM Mounts GDS IntelliSkin Thin-Case protective sleeve with read Pogo-Pads is designed for the Samsung Galaxy Tab S9 FE+, S9+ & S10+ and is a slim, two-piece enclosure developed specifically for use with the GDS Uni-Conn docking platform. The GDS connector integrates a USB-C plug that routes through the case to the rear pogo pads located in the GDS Uni-Conn adapter. The flat, rugged pogo contacts are designed for frequent docking, protect the device’s port, and collect less dirt, making them easier to clean. An integrated USB-C port at the bottom of the case allows the device to be charged even when no GDS Uni-Conn docking station is available. Thanks to its thoughtful design, all tablet functions remain fully accessible: camera, buttons, and ports can still be used without restriction. The IntelliSkin Thin-Case for the Samsung Tab S9 FE+, S9+ & S10+ is only compatible with GDS Powered Uni-Conn docks. Product features RAM Mounts RAM-GDS-SKIN-SAM96-TCB-GRY: Compatible with GDS Uni-Conn Docks Continued access to camera and buttons Charging function Input Connector: USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps Colour - light gray Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-SAM96-TCB-GRY is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin-Case for Samsung Galaxy Tab S9 FE+/S9+/S10+ - Rear Pogo-Pads, External USB-C, GDS-Technology, light gray

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-B1B: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-B1B adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets without Cases - Rear Pogo Pads

The RAM Mounts GDS Tab-Conn Adapter for Otterbox Defender cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-OTD1B: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-OTD1B adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for OtterBox Defender Cases - D Shape & Rear Pogo Pads

The RAM Mounts GDS Tab-Conn Adapter for Otterbox Defender cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-OTD1B-GRY: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-OTD1B-GRY adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for OtterBox Defender Cases - Rear Pogo Pads - Light Gray

The RAM Mounts GDS Tab-Conn Adapter for Otterbox Defender cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-OTD1DB: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts) / up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-OTD1DB adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets in Otterbox Defender Cases (D-Shape & Rear Pogo Pads)