ram mounts ram d 201u mi1 connecting arm medium with lock nut

RAM Mounts Connecting Arm Medium with Lock Nut - approx. 213 mm, for D-Balls (2.25 inches), in poly bag

Objev podobné jako RAM Mounts RAM-D-201U-MI1 Connecting Arm Medium with Lock Nut

RAM Mounts Connecting Arm Long (approx. 154 mm) - for B-Balls (1 inch)

Objev podobné jako RAM Mounts RAM-B-201U-C Connecting Arm

RAM Mounts Connecting Arm Short (approx. 61 mm) - for B-Balls (1 inch)

Objev podobné jako RAM Mounts RAM-B-201U-A Connecting Arm

RAM Mounts Connection Arm Short - approx. 129 mm, for D-Balls (2.25 inches), in a poly bag

Objev podobné jako RAM Mounts RAM-D-201U-C Connection Arm Short

RAM Mounts connection arm long - approx. 330 mm, for D-balls (2.25 inches), in a poly bag

Objev podobné jako RAM Mounts RAM-D-201U-E connection arm

RAM Mounts Connecting Arm Short with Lock Nut - approx. 129 mm, for D-Balls (2.25 inches), in poly bag

Objev podobné jako RAM Mounts RAM-D-201U-C-MI1 Connecting Arm

RAM Mounts Connecting Arm Medium (approx. 94 mm) - B-Balls (1 inch)

Objev podobné jako RAM Mounts RAM-B-201U Connecting Arm

RAM Mounts Connection Arm medium - approx. 213 mm, for D-balls (2.25 inches), in a poly bag

Objev podobné jako RAM Mounts RAM-D-201U Connection Arm medium

RAM Mounts Swivel Arm with Vertical Tube Base - Arm Length approx. 150 mm, Connecting Arm, Round Base Plate, C-Ball (1.5 inches), in Poly Bag

Objev podobné jako RAM Mounts RAM-VB-110V-2U Swivel Arm with Vertical Tube Base

RAM Mounts Suction Base Set with Diamond Connection - long connecting arm, 2x Diamond base plate (trapezoid), B-ball (1 inch), in a poly bag

Objev podobné jako RAM Mounts RAM-B-166U-C Suction Base Set with Diamond Connection

RAM Mounts Base Plate for Crown Forklift - D-Ball (2.25"), in Poly Bag

Objev podobné jako RAM Mounts RAM-D-202U-CRO1 Base Plate

RAM Mounts Round Base Plate (Steel Reinforced) - 120° Hole Grid, 93.5mm Diameter, D-Ball (2.25"), in Poly Bag

Objev podobné jako RAM Mounts RAM-D-202U-IN1 Round Base Plate

RAM Mounts Base Plate Round - B-Ball (1 Inch), Plate Diameter 63.5 mm, AMPS Hole Grid

Objev podobné jako RAM Mounts RAM-B-202U Base Plate Round

RAM Mounts Base Plate Rectangular (1.5 x 2.5 inches) - B-Ball (1 inch)

Objev podobné jako RAM Mounts RAM-B-202U-1525 Base Plate Rectangular

RAM Mounts Base Plate Round - D-Ball (2.25"), 120° Hole Grid, 93.5mm Diameter

Objev podobné jako RAM Mounts RAM-D-202U Base Plate Round

RAM Mounts Rectangular Base Plate (2 x 3 inches) - D-Ball (2.25 inches), in poly bag

Objev podobné jako RAM Mounts RAM-D-202U-23 Rectangular Base Plate

RAM Mounts Rectangular Base Plate (2 x 5 inches) - D-Ball (2.25 inches), in poly bag

Objev podobné jako RAM Mounts RAM-D-202U-25 Rectangular Base Plate

RAM Mounts Connecting Arm Long - C-Ball (1.5"), approx. 230 mm

Objev podobné jako RAM Mounts RAM-201U-D Connecting Arm

RAM Mounts Connecting Arm - 1/2" NPT Female Thread (Single Sided), C-Ball (1.5"), in Poly Bag

Objev podobné jako RAM Mounts RAM-200-1U Connecting Arm

RAM Mounts Connection Arm medium - approx. 140 mm, for C-balls (1.5 inches), in a poly bag

Objev podobné jako RAM Mounts RAM-201U Connection Arm medium

RAM Mounts Medium Composite Connection Arm - Approx. 90 mm long, for B-balls (1 inch), in poly bag

Objev podobné jako RAM Mounts RAP-B-201U Medium Composite Connection Arm

RAM Mounts Medium Composite Link Arm for C-Balls (1.5 inches) - Approx. 140 mm long, in poly bag

Objev podobné jako RAM Mounts RAP-201U Medium Composite Link Arm

RAM Mounts Mounting Set - D-Ball (2.25"), Round Base Plate (93.5mm Diameter), Short Link Arm, VESA Plate (75x75mm Hole Grid)

Objev podobné jako RAM Mounts RAM-D-101U-C-MI1-2461 Mounting Set

RAM Mounts Link Arm Short - C-Ball (1.5"), Approx. 90mm

Objev podobné jako RAM Mounts RAM-201U-B Link Arm

RAM Mounts Short Composite Connection Arm - approx. 60 mm long, for B-balls (1 inch), in poly bag

Objev podobné jako RAM Mounts RAP-B-201U-A Short Composite Connection Arm

RAM Mounts Connection Arm Long - approx. 230 mm, for C-Balls (1.5 inches), with Metal Twist Cap, in Poly Bag

Objev podobné jako RAM Mounts RAM-201MU-D Connection Arm

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CP-CU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPDHU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C Ausgangsleistung: 15W Ausgangsspannung: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PDKLU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionLockable with keyPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PDKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PDKLU Form-Fit Holder (with key-locking) for Honeywell RT10

RAM Mounts Pod I Seat Rail Adapter with AMPS Connection - Flexible Rod (Approx. 450mm), Round Base Plate, B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAM-B-316-1-202U Pod I Seat Rail Adapter with AMPS Connection

RAM Mounts Set with Mating Plate - C-Ball (1.5"), Short Link Arm, 4-Bolt AMPS

Objev podobné jako RAM Mounts RAM-101-B-225B2U Set with Mating Plate

RAM Mounts Suction Base with Diamond Base Plate (Trapezoid) - Twist Cap, Not Mounted, B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAM-B-224-1U Suction Base with Diamond Base Plate

RAM Mounts rectangular base plate (50.8 x 76.2 mm) with C-ball (1.5 inches) - in poly bag

Objev podobné jako RAM Mounts RAM-202U-23 rectangular base plate

RAM Mounts Rectangular Base Plate (25.4 x 50.8 mm) with C-Ball (1.5 inches) - in poly bag

Objev podobné jako RAM Mounts RAM-202U-12 Rectangular Base Plate

RAM Mounts rectangular base plate (38.1 x 50.8 mm) with C-ball (1.5 inches) - in poly bag

Objev podobné jako RAM Mounts RAM-202U-152 rectangular base plate

RAM Mounts Round Base Plate (AMPS) - C-Ball (1.5"), in Poly Bag

Objev podobné jako RAM Mounts RAM-202U Round Base Plate

RAM Mounts rectangular base plate (50.8 x 63.5 mm) with C-sphere (1.5 inches) - in poly bag

Objev podobné jako RAM Mounts RAM-202U-225 rectangular base plate

RAM Mounts rectangular base plate (50.8 x 127 mm) with C-ball (1.5 inches) - in poly bag

Objev podobné jako RAM Mounts RAM-202U-25 rectangular base plate

RAM Mounts Pod HD Universal Vehicle Mount with AMPS Connection - Ratchet System, Max 80cm High, Center Link Arm, Round Base Plate, C-Ball (1.5")

Objev podobné jako RAM Mounts RAM-316-HD-18-202U Pod HD Universal Vehicle Mount

RAM Mounts Pod HD Universal Vehicle Mounting with AMPS Connection - Ratchet System, MAX. 65 CM HIGH, Center Connection Arm, Round Base Plate, C-Ball (1.5 inch)

Objev podobné jako RAM Mounts RAM-316-HD-202U Pod HD Universal Vehicle Mounting

RAM Mounts Triple Suction Base with Round Base Plate (AMPS) - Each Twist Cap, Not Assembled, Plastic Plate, C-Ball (1.5"), in Poly Bag

Objev podobné jako RAM Mounts RAP-365-224-1U Triple Suction Base with Round Base Plate

RAM Mounts Handlebar Set - B-Ball (1 Inch), Screw Clamp, Middle Link Arm, Round Base Plate (AMPS)

Objev podobné jako RAM Mounts RAM-B-149Z-202U Handlebar Set

RAM Mounts Suction Base Set with AMPS Connection - Long Connecting Arm, Diamond Base Plate (Trapezoid), Round Base Plate (AMPS), B-Ball (1 Inch), in Polyb

Objev podobné jako RAM Mounts RAM-B-166-C-202U Suction Base Set

RAM Mounts Double Suction Base with Round Base Plate (AMPS) - B-Ball (1 inch), Unmounted

Objev podobné jako RAM Mounts RAM-B-189B-202U Double Suction Base

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Frame and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22U:Compatible with accessoriesEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22U Form-Fit Holder (Latch) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22PLU Form-Fit Holder (Key-Locking) for Zebra ET80/85