ram mounts ram 263u base plate

RAM Mounts Suction Base Set with AMPS Connection - Long Connecting Arm, Diamond Base Plate (Trapezoid), Round Base Plate (AMPS), B-Ball (1 Inch), in Polyb

Objev podobné jako RAM Mounts RAM-B-166-C-202U Suction Base Set

2250 Kč

Detail koupit

RAM Mounts RAM-224-3U Composite Suction Base Set

RAM Mounts Composite Suction Base Set with C-Ball (1.5 inches) - Round Base Plate (AMPS), in Poly Bag

Objev podobné jako RAM Mounts RAM-224-3U Composite Suction Base Set

2550 Kč

Detail koupit

RAM Mounts RAM-B-166U Suction Base Set

RAM Mounts Suction Base Set with Diamond Connection - Middle Connecting Arm, 2x Diamond Base Plate (Trapezoid), B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts RAM-B-166U Suction Base Set

1220 Kč

Detail koupit

RAM Mounts RAM-B-166U-C Suction Base Set with Diamond Connection

RAM Mounts Suction Base Set with Diamond Connection - long connecting arm, 2x Diamond base plate (trapezoid), B-ball (1 inch), in a poly bag

Objev podobné jako RAM Mounts RAM-B-166U-C Suction Base Set with Diamond Connection

2250 Kč

Detail koupit

RAM Mounts RAM-B-189B-202U Double Suction Base

RAM Mounts Double Suction Base with Round Base Plate (AMPS) - B-Ball (1 inch), Unmounted

Objev podobné jako RAM Mounts RAM-B-189B-202U Double Suction Base

1749 Kč

Detail koupit

RAM Mounts RAM-VB-110V-2U Swivel Arm with Vertical Tube Base

RAM Mounts Swivel Arm with Vertical Tube Base - Arm Length approx. 150 mm, Connecting Arm, Round Base Plate, C-Ball (1.5 inches), in Poly Bag

Objev podobné jako RAM Mounts RAM-VB-110V-2U Swivel Arm with Vertical Tube Base

4225 Kč

Detail koupit

RAM Mounts RAM-217-1U Round Double Ball Base

RAM Mounts Round Double Ball Base - C-Ball (1.5 inches), in Poly Bag

Objev podobné jako RAM Mounts RAM-217-1U Round Double Ball Base

2750 Kč

Detail koupit

RAM Mounts RAM-B-166-UN7U Composite Suction Base Bracket

RAM Mounts Composite Suction Base Bracket with X-Grip Retaining Clip for Smartphones up to 82.6 mm Width - B-Ball (1 Inch), Middle Connection Arm (approx. 90 mm)

Objev podobné jako RAM Mounts RAM-B-166-UN7U Composite Suction Base Bracket

1786 Kč

Detail koupit

RAM Mounts RAM-B-367U Motorcycle Base Attachment

RAM Mounts Motorcycle Base Attachment Handlebar Head - B-Ball (1 Inch), M8 Bolts

Objev podobné jako RAM Mounts RAM-B-367U Motorcycle Base Attachment

549 Kč

Detail koupit

RAM Mounts RAM-B-166-UN9U X-Grip Suction Base Holder

RAM Mounts X-Grip Suction Base Holder for Tablets (10 inches) - B-Ball (1 Inch), Medium Connection Arm

Objev podobné jako RAM Mounts RAM-B-166-UN9U X-Grip Suction Base Holder

5751 Kč

Detail koupit

RAM Mounts RAM-B-166-UN8U X-Grip Suction Base Bracket

RAM Mounts X-Grip Suction Base Bracket for Tablets (7 inches) - B-Ball (1 Inch), Medium Link Arm

Objev podobné jako RAM Mounts RAM-B-166-UN8U X-Grip Suction Base Bracket

3750 Kč

Detail koupit

RAM Mounts Triple Suction Base

RAM Mounts Triple Suction Base with AMPS Holder - each with twist cap, metal plate, in poly bag

Objev podobné jako RAM Mounts Triple Suction Base

1265 Kč

Detail koupit

RAM Mounts Triple Suction Base

RAM Mounts Triple Suction Base with AMPS Holder - each screw cap, not mounted, plastic plate, in poly bag

Objev podobné jako RAM Mounts Triple Suction Base

1974 Kč

Detail koupit

RAM Mounts Composite Octagon Base

RAM Mounts Composite Octagon Base (Round) - B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts Composite Octagon Base

599 Kč

Detail koupit

RAM Mounts RAM-101-B-225B2U Set with Mating Plate

RAM Mounts Set with Mating Plate - C-Ball (1.5"), Short Link Arm, 4-Bolt AMPS

Objev podobné jako RAM Mounts RAM-101-B-225B2U Set with Mating Plate

1631 Kč

Detail koupit

RAM Mounts RAM-2461U-IN1 VESA Plate

RAM Mounts VESA Plate (75x75 mm Hole Grid) with C-Ball (1.5 Inch) - Steel Reinforced, in Poly Bag

Objev podobné jako RAM Mounts RAM-2461U-IN1 VESA Plate

1249 Kč

Detail koupit

RAM Mounts RAM-246-AD1U VESA Plate

RAM Mounts VESA Plate (75x75 & 100x100 mm Hole Grid) - C-Ball (1.5 inches), in poly bag

Objev podobné jako RAM Mounts RAM-246-AD1U VESA Plate

1133 Kč

Detail koupit

RAM Mounts RAM-D-246U VESA Plate

RAM Mounts VESA Plate (120.7 x 120.7 mm) - D-Sphere (2.25 inches), 75x75 & 100x100 mm Hole Grid

Objev podobné jako RAM Mounts RAM-D-246U VESA Plate

1098 Kč

Detail koupit

RAM Mounts RAM-D-246U-IN1 VESA Plate

RAM Mounts VESA Plate (Steel Reinforced, 120.7 x 120.7 mm) - 75x75 & 100x100 mm Hole Grid, D-Ball (2.25 inches), in Poly Bag

Objev podobné jako RAM Mounts RAM-D-246U-IN1 VESA Plate

1849 Kč

Detail koupit

RAM Mounts RAM-D-2461U VESA Plate

RAM Mounts VESA Plate (3.625 x 3.625 inches) - 75 x 75 mm Hole Grid, D-Ball (2.25 inches), in Poly Bag

Objev podobné jako RAM Mounts RAM-D-2461U VESA Plate

916 Kč

Detail koupit

RAM Mounts Weighted Platform Base with 4-Hole Pattern for GDS® Pedestal Docks - 9" x 9"

The RAM® Weighted Platform Base with 4-Hole Pattern for GDS® Pedestal Docks (RAP-251-2U) is a no-drill solution that allows the GDS® Pedestal Dock to be placed on any flat surface. The 8-pound cast iron insert provides a secure foundation for the mounted device.FeaturesNo-drill platform base with 8lb cast iron weightHole pattern - 2.625" x 2.625"Material(s) - Cast iron, High strength composite

Objev podobné jako RAM Mounts Weighted Platform Base with 4-Hole Pattern for GDS® Pedestal Docks - 9" x 9"

5558 Kč

Detail koupit

RAM Mounts RAM-HOL-ZE22U Form-Fit Holder (Latch) for Zebra ET80/85

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Frame and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22U:Compatible with accessoriesEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22U Form-Fit Holder (Latch) for Zebra ET80/85

4035 Kč

Detail koupit

RAM Mounts RAM-HOL-ZE25PDHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PDHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

10379 Kč

Detail koupit

RAM Mounts RAM-HOL-ZE25PHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderHeated Pogo-PinsLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25PHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

7924 Kč

Detail koupit

RAM Mounts RAM-HOL-ZE22PLU Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22PLU Form-Fit Holder (Key-Locking) for Zebra ET80/85

6120 Kč

Detail koupit