ram mounts gds roto mag

RAM Mounts GDS Roto-Mag for Zebra ET4x 8 Inch Enterprise Tablet - 3-in-1 Accessories with Handle, Strap and Magnets

Objev podobné jako RAM Mounts GDS Roto-Mag

RAM Mounts GDS Roto-Mag for Zebra ET4x 10 Inch Enterprise Tablet - 3-in-1 Accessory with Handle, Strap and Magnets

Objev podobné jako RAM Mounts GDS Roto-Mag

RAM Mounts GDS Roto-Mag for Zebra ET60 / ET65 Tablets - 4-in-1 Accessory with Stand, Holding Loop, Magnets & Rotating Handle

Objev podobné jako RAM Mounts GDS Roto-Mag

zahradní nábytek Magnus set 4 ks
nábytek Magnus pro balkon a zahradu
Wenko Magna černá
vertikální podpěra pro truhlík Magnus 100 cm
zelená zeď Magnus pro velkoobjemové truhlíky
příslušenství k truhlíku Magnus vertikální systém
velkoobjemový truhlík Magnus 100 cm terakota
truhlík Magnus pro zeleninu a okrasné rostliny
truhlík Magnus s možností koleček
zelená stěna z truhlíku Magnus
truhlík Magnus pro vertikální zahradničení
T-spojka pro MAG LOW kolejnicový systém
LED2 MAG IN CORNER-H W DALI bílá
rohové spojení pro MAG TRACK osvětlení
MSI MAG 321UPX QD-OLED s HDMI 2.1
MSI MAG 321UPX ergonomický stojan VESA

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Left) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Right) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Right) - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CP-CU holder ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPDU holder ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Key locking Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock mit Schlüsselverriegelung - 2-Hole AMPS Pattern - USB-C Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the dual USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CD2U: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & Dual USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-C port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5 - 12V ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-C port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CP-CU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C & USB-C (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CP-CU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPDHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The heated pogo pins ensure a reliable connection and effectively prevent the contacts from freezing or becoming blocked by ice. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPHU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Heated Pogo-Pins Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPHU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Heated Pogo-Pins - Screw-Set

The RAM Mounts GDS Uni-Conn Holder with Key-Locking (Rechts) is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder with key-locking is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCKL-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Key locking Charging function Input Connector: USB-C Ausgangsleistung: 15W Ausgangsspannung: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-U1CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock With Key-Locking - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. With the USB-A port, you can integrate a peripheral device into your setup. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CDU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function & data transfer Input Connector: USB-C Power Output: 15W Output voltage: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw Set

The RAM Mounts GDS Uni-Conn Holder is a universal docking station specifically designed for devices in an IntelliSkin protective sleeve with a Uni-Conn adapter. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the IntelliSkin protective sleeve and mounted GDS Uni-Conn adapter into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. For the docking station to function, the GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted on the designated IntelliSkin protective case. Currently, the following devices are compatible with this fixed docking height: Samsung Tab A7 Lite, Tab A 8.4, Tab S9 FE, Tab S9 FE+, Tab Active5, Tab Active3, and Tab A9+. This holder provides a reliable solution for charging and data transfer across various applications. Product features RAM Mounts RAM-GDS-DOCK-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output voltage: 5 - 12V @ 3A Input Cable Length: ca. 215 mm Product dimensions: Overall Width: 8,02 ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. An additional USB-A port allows you to integrate a peripheral device into your setup. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPDU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C & USB-A (Peripheral output - 500mAh) Power Output: 15W Output Voltage: 5V - 12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C & USB-A Connector - Screw-Set

The RAM Mounts GDS Uni-Conn spring-loaded holder is a universal docking station specifically designed for devices enclosed in an IntelliSkin case with a Uni-Conn adapter. The spring-loaded quick-release mechanism securely holds your device in place while enabling fast charging via the integrated pogo pins, with power supplied through a USB-C connection. The GDS Uni-Conn adapter (RAM-GDS-U1U) must be mounted onto the designated IntelliSkin case for use with this docking station. To place the device with the IntelliSkin case into the dock, the GDS Uni-Conn adapter must be inserted into the octagon connector and pushed upward until the bottom can be seated into the dock. Product features RAM Mounts RAM-GDS-DOCK-V12-U1CPU: Only compatible with IntelliSkin & Uni-Conn adapter Easy insertion and removal Charging function Input Connector: USB-C Power Output: 15W Output Voltage: 5V-12V @ 3A Input Cable Length: ca. 100 mm Additional information: GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as forklifts. Consider the GDS Tough-Dock for extreme applications. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-U1CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Uni-Conn Spring Loaded Charging Dock - 2-Hole AMPS Pattern - USB-C Connector - Screw-Set

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-B1B: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-B1B adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets without Cases - Rear Pogo Pads

The RAM Mounts GDS Tab-Conn Adapter for Otterbox Defender cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-OTD1B: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-OTD1B adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for OtterBox Defender Cases - D Shape & Rear Pogo Pads

The RAM Mounts GDS Tab-Conn Adapter for Otterbox Defender cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-OTD1B-GRY: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-OTD1B-GRY adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for OtterBox Defender Cases - Rear Pogo Pads - Light Gray

The RAM Mounts GDS Tab-Conn Adapter for Otterbox Defender cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-OTD1DB: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts) / up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-OTD1DB adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets in Otterbox Defender Cases (D-Shape & Rear Pogo Pads)

The RAM Mounts GDS Tab-Conn Adapter for Otterbox Defender cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-OTD1DB-GRY: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts) / up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-OTD1DB-GRY adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets in OtterBox Defender Cases - D Shape & Rear Pads - Light Gray

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-B1B-GRY: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-B1B-GRY adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets without Case - Rear Pogo Pads - Light Gray

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-B1D: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts), up to USB 2.0 @ 480 Mbps (via external USB-C port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-B1D adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets Without Case - D Shape Pogo Pads

The RAM Mounts GDS Tab-Conn Adapter enables the benefits of IntelliSkin technology for tablets without a protective case. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution allows GDS technology integration without the need to invest in new devices. Product features RAM Mounts RAM-GDS-TABC-B1DB: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap IExternal USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts), up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-B1DB adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets without Case (D-Shape & Rear Pogo Pads)

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-B1DB-GRY: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts) / up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-B1DB-GRY adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets without Cases - D Shape & Rear Pads - Light Gray

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-F1B: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-F1B adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Folio Style Cases - Rear Pogo Pads

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-F1B-GRY: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-F1B-GRY adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Folio Style Cases - Rear Pogo Pads - Light Gray

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-F1DB: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts), up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-F1DB adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Tablets with Folio-Style Cases (D-Shape & Rear Pogo Pads)

The RAM Mounts GDS Tab-Conn Adapter for folio-style cases allows the benefits of IntelliSkin technology to be applied to tablets with folio-style cases. By installing this self-adhesive adapter, the USB-C port of the device is protected via an integrated Pogo-Pin connection, making the tablet compatible with the GDS system. An external USB-C 2.0 port at the bottom of the adapter allows device charging, even without a GDS Uni-Conn docking station. The GDS Tab-Conn Adapter is exclusively compatible with all GDS Uni-Conn Docks. This cost-effective solution enables the integration of GDS solutions without the need to remove existing protective cases or invest in new devices. Product features RAM Mounts RAM-GDS-TABC-F1DB-GRY: Compatible with USB-C Integrated hand strap Compatible with GDS shoulder strap External USB-C 2.0 port Transfer Speed: up to USB 3.1 @ 5 Gbps (via D-Shape contacts), up to USB 2.0 @ 480 Mbps (via external USB-C port or rear contacts) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-TABC-F1DB-GRY adapter is supplied.

Objev podobné jako RAM Mounts GDS Tab-Conn for Folio Style Cases - D Shape & Rear Pogo Pads - Light Gray

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9 & A7 Lite 8.7" - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

The RAM Mounts GDS Uni-Conn Snap-In Docking Station is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCK-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open cockpit applications, such as ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Dock - USB-C Connector - 2-Hole AMPS

The RAM Mounts GDS Uni-Conn Snap-In Docking Station is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCK-U3EU: Only compatible with IntelliSkin Thin-Case and Rear Pogo-Pads Snap-In function Easy insertion and removal Charging function Input Connector: JST / RJ45 (Ethernet) Connector Power Output: 20W max Output Voltage: USB PD 3.0 - 5V @ 3A / 9V @ 2.2A / 12V @1.67A Input Cable Length: ca. 800 mm Includes PoE to PD Charging Module Weight: ca. 226 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Dock - 2-Hole AMPS Pattern - RJ45 Connector - PoE to PD Charging Modul - Screw Set

The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Left) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCKLL-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Left) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

The RAM Mounts GDS Uni-Conn Snap-In Docking Station with Key-Locking (Rechts) is a versatile solution for devices equipped with an IntelliSkin Thin-Case protective sleeve with rear Pogo-Pads. This Snap-In holder securely holds your device while enabling fast charging via integrated Pogo-Pins, with power supplied through a USB-C connection. The docking and undocking process is simple: Insert the tablet with the compatible IntelliSkin Thin-Case protective sleeve into the base of the dock and push it back until it snaps into place. To remove it, simply press the lever to release the tablet. The back of the dock is designed to accommodate a Diamond (Trapezoid) base plate (not included). This holder provides a reliable charging solution for various applications. Product features RAM Mounts RAM-GDS-DOCKLR-U3CPU: Only compatible with IntelliSkin and Rear Pogo-Pads Snap-In function Key-Locking Easy insertion and removal Charging function Input Connector: USB-C Power Output: 60W max Output voltage: 5 - 20V @ 3A max Input Cable Length: ca. 800 mm Weight: ca. 150 g Additional information: The Lever Stop included with this dock is required in order to function properly. Warranty on dock is void if dock is used without Lever Stop. GDS Uni-Conn Snap-In docks are not recommended for open ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Dock with Key-Locking (Rechts) - 2-Hole AMPS Pattern - USB-C Connector - Screw Set

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM76CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector