ram mounts aluminum tube

RAM Mounts Aluminum Tube - Length 228.6 mm, 1/2" NPT thread on both sides

Objev podobné jako RAM Mounts Aluminum Tube

RAM Mounts Aluminum Flex-Arm (18 inch), Double-Sided Composite Base - B-Ball (1 Inch), in Poly Bag

Objev podobné jako RAM Mounts Aluminum Flex-Arm

RAM Mounts Tube Clamp for C-Balls (1.5 inches) - for 12.7-50.8 mm diameter, in poly bag

Objev podobné jako RAM Mounts RAM-108BU Tube Clamp

snadno udržovatelná židle Duo Tube
židle Duo Tube v barvě Stone
žehlící prkno Rolser K-S Black Tube S
kompaktní žehlicí prkno Black Tube
rolser com polar 8 black tube černá
rolser com polar 8 black tube šedá
žehlicí prkno Rolser K-SURF BLACK TUBE 130x37 cm
Faunica zvířátka figurky sada v tubě
hama h8790 korálky a podložky v tubě
přenosná stavebnice v tubě
koně v uzavíratelné plastové tubě
stavebnice v tubě na cesty
100 barevných dílků v tubě
240 dílků v tubě pastelové barvy
100 plastových dílků v tubě
Faunica Zvířátka figurky v tubě

RAM Mounts Double Tube Clamp - C-Ball (1.5"), Diameter 31.8-38.1mm

Objev podobné jako RAM Mounts RAM-235-1U Double Tube Clamp

RAM Mounts Double Tube Clamp - C-Ball (1.5"), Diameter 25.4-31.8mm

Objev podobné jako RAM Mounts RAM-235U Double Tube Clamp

RAM Mounts X-Grip Tube Bracket for Tablets (10 inches) - C-Ball (1.5 inches), Double Screw Terminal (up to 31.8 mm Diameter), Middle Connection Arm

Objev podobné jako RAM Mounts RAM-HOL-UN9-235U X-Grip Tube Bracket

RAM Mounts Swivel Arm with Vertical Tube Base - Arm Length approx. 150 mm, Connecting Arm, Round Base Plate, C-Ball (1.5 inches), in Poly Bag

Objev podobné jako RAM Mounts RAM-VB-110V-2U Swivel Arm with Vertical Tube Base

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-CAU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-1AU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-A 1.1 (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support ... Unknown localization key: "more"

Objev podobné jako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-CAU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product ... Unknown localization key: "more"

Objev podobné jako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C and USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CAU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C (Peripheral output - 500mAh) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Power & Data Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. The included RAM NFC extender supports the NFC function with a range of up to 30 cm. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, GDS Roto-Mag and side accessory attachments. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKL-NFCU: Compatible with accessories Including RAM NFC-Extender Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Potential interference of NFC functionality may occur when positioned close ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form- Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLNU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLNU holder is supplied.

Objev podobné jako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral & data support is provided by the built-in dual USB-A & RJ45 (ethernet) cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-RJ45AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A & RJ45 (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & Dual USB-A & RJ45(Ethernet) Conne

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLTU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLTU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-1AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible ... Unknown localization key: "more"

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad mini (A17 Pro & mini 6) with rear pogo pads - designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP36-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP36-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad mini 6 & mini (A17 Pro) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad mini (A17 Pro & mini 6) - designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible - including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP36-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP36-TCD is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad mini 6 & mini (A17 Pro) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 12.9 (3.-5. Gen.) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP37-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP37-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 12.9 (3.-5. Gen.) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 12.9 (3.-5. Gen.) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP37-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP37-TCD is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 12.9 (3.-5. Gen.) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad 10 & 11 Gen. (A16) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP40-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP40-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad 10 & 11 Gen. (A16) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad 10 & 11 Gen. (A16) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP40-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP40-TCD is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad 10 & 11 Gen. (A16) - GDS-Technology - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Air 11 (M2 & M3) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M2-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M2-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Air 11 (M2 & M3) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Air 11 (M2 & M3) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M2-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M2-TCD is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Air 11 (M2 & M3) - GDS-Technology - External USB-C Connector

The RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is the ideal solution for the Apple iPad Air 11 (M2 & M3) – designed for demanding environments where reliability and versatility are essential. This slim yet durable case offers reliable protection against daily wear and tear while enabling flexible connectivity with the GDS Uni-Conn docking platform. Thanks to its smart dual-connectivity design, the case provides two connection options: Rear pogo pads allow for quick and cable-free docking, while an additional D-Shape connector at the bottom offers another interface for power and data – depending on the docking solution available. An extra USB-C port at the bottom also allows the device to be charged without a dock. Its thoughtful design ensures that all tablet functions remain fully accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M2-TCDB: Only compatible with GDS Uni-Conn Pogo pads at the bottom & back Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External ... Unknown localization key: "more"

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Air 11 (M2 & M3) - GDS-Technology - Rear Pogo-Pads & D-Shape - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 11 (M4) with rear pogo pads – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. The flat, ruggedized pogo pad contacts are optimized for frequent docking and are easy to clean. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M4-TCB: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 2.0 @ 480Mbps (via External USB-C Port) Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M4-TCB is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 11 (M4) - GDS-Technology - Rear Pogo-Pads - External USB-C Connector

This RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is a slim, durable case for the Apple iPad Pro 11 (M4) – designed specifically for the GDS Uni-Conn docking platform. It offers reliable protection combined with convenient charging functionality. An additional USB-C port at the bottom allows the device to be charged even without a dock. Thanks to its thoughtful design, all tablet functions remain accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M4-TCD: Only compatible with GDS Uni-Conn Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port) Additional information: *USB 3.1 is the maximum transfer speed that the IntelliSkin can support, but actual transfer speeds will vary based on selected docks, chargers, and device limitations. Devices shown are not included in the delivery. Only the RAM-GDS-SKIN-AP45-M4-TCD is supplied.

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 11 (M4) - GDS-Technology - External USB-C Connector

The RAM Mounts GDS IntelliSkin Thin-Case charging protective cover is the ideal solution for the Apple iPad Pro 11 (M4) – designed for demanding environments where reliability and versatility are essential. This slim yet durable case offers reliable protection against daily wear and tear while enabling flexible connectivity with the GDS Uni-Conn docking platform. Thanks to its smart dual-connectivity design, the case provides two connection options: Rear pogo pads allow for quick and cable-free docking, while an additional D-Shape connector at the bottom offers another interface for power and data – depending on the docking solution available. An extra USB-C port at the bottom also allows the device to be charged without a dock. Its thoughtful design ensures that all tablet functions remain fully accessible – including the camera and buttons. The IntelliSkin Thin-Case is exclusively compatible with GDS Uni-Conn mounts and docks. Product features RAM Mounts RAM-GDS-SKIN-AP45-M4-TCDB: Only compatible with GDS Uni-Conn Pogo pads at the bottom & back Compatible with hand- & shoulder strap Continued access to camera and buttons Charging function Easy insertion and removal Ports: External USB-C 2.0 Transfer Speed: USB 3.1 @ 5 Gbps (via D-Shape-Contacs)* USB 2.0 @ 480 Mbps (via External USB-C Port ... Unknown localization key: "more"

Objev podobné jako RAM Mounts IntellìSkin Thin Case for Apple iPad Pro 11 (M4) - GDS-Technology - Rear Pogo-Pads & D-Shape - External USB-C Connector

RAM Mounts rameno pro 1,5\" kulové čepy EAN: 793442001215 Přehled RAM Mounts rameno s celkovou délkou 143 mm je navrženo pro 1,5\" kulové čepy. Pružina a utahovací šroub na rameni umožňují rychlé a pevné připevnění. Specifikace Rozměry: celková délka 14,3 cm, délka mezi svorkami 11,4 cm Materiál: povlakovaná slitina hliníku Váha: 322 g Velikost kulového čepu: 1,5\", pryžový, velikosti \"C\" Řady a nosnosti RAM vyrábí svůj systém úchytů a ramen v několika řadách, odstupňovaných podle nosnosti. Díly v řadě \"C\" jsou určeny pro zařízení do hmotnosti 4,5 kg. O systému držáků RAM mount Systém RAM poskytuje jedinečnou variabilitu díky patentovanému systému kulových čepů a ramen se svorkami. Uživatel si tak může sestavit držák pro své zařízení podle své potřeby. Kovový vs. plastový díl Výhodou dílů z vysokopevnostního plastu je nižší hmotnost a cena, zatímco díly z povlakované slitiny hliníku nabízejí prémiový vzhled. RAM mount garantuje pro oba typy dílů stejné pevnostní parametry a poskytuje na ně stejnou doživotní záruku. O RAM mount Produkty RAM mount jsou navrženy tak, aby bezpečně uchytily elektronické přístroje tam, kde je lidé potřebují. Výrobce klade důraz na vysokou kvalitu a spolehlivost.

Objev podobné jako RAM Mounts rameno pro 1,5" kulové čepy (celková délka: 143 mm),

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Frame and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22U:Compatible with accessoriesEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22U Form-Fit Holder (Latch) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PHLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PHLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PLU Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PDU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDU Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM NFC Extender can be used to expand the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3NU:Easy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for the RAM NFC ExtenderAdditional information: This holder version will not support the Getac Rotating Hand Strap & Kickstand accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE3NU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE3NU Form-Fit Holder for Getac ZX70

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PDHU:Compatible with Zebra KeyboardEasy insertion and removalWith LatchAdditional mounting ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PDHU Form-Fit Holder (Latch) for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PD2U:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp- Right or NFC-RepeaterInput Connector: 5.5mm DCOutput ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PD2U Form-Fit Holder (Latch) for Zebra ET80/85

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET8x 2-in-1 Tablet with or without Rugged Boot and Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22PDLU:Compatible with accessoriesEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right or NFC-RepeaterLockable with keyInput Connector: 5.5mm DCOutput ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE22PDLU Form-Fit Holder (key-locking) for Zebra ET80/85

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET80 & ET85 2-in-1 Tablet with or without Rugged Boot and Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cut-out on the inside of the cradle allows tablet accessories such as Zebra Expansion Back, GDS Roto-Mag and GDS Hand-Stand to be used here as well.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET8x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE22LU:Compatible with accessoriesEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right or NFC-RepeaterAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE22LU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE22LU Form-Fit Holder (Key-Locking) for Zebra ET80/85

This RAM Mounts Form-Fit holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PD2HU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PD2HU Form-Fit Holder for Zebra ET60/65

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4U:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4U Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM Vent-Temp can utilize the vehicle's air vents to direct hot or cold air to the Getac ZX70.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3FU:Compatible with the Getac tablet accessoiresEasy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-TempAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-GE3FU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE3FU Form-Fit Holder for Getac ZX70

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablets with or without Zebra Keyboard.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25PLU:Compatible with Zebra KeyboardEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp-Right, NFC-Repeater or Zebra CAC ReaderLockable with keyInput Connector: 5.5mm DCInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: RoHS, IC, FCC, WEEE, CE & UKCAAdditional information: Devices shown are ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-ZE25PLU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET60 & ET65 Tablet with or without Zebra Keyboard.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The 2-in-1 latch secures the tablet and also allows the keyboard to be opened and closed independently.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the ET6x.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE25LU:Compatible with Zebra KeyboardEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesUsable with RAM Vent-Temp, Temp Right, NFC-Repeater or Zebra CAC ReaderAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE25LU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE25LU Form-Fit Holder (Key-Locking) for Zebra ET60/65

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PDKLU Form-Fit Holder (Key-Locking) for Getac ZX10