locking module et401 8 10

Locking Module - Zebra ET401 8“, 10” with Rugged Frame + Expansion Back

Objev podobné jako Locking Module, ET401 8" & 10"

Lock module / 2 keys Zebra ET401 8“, 10” with rugged frame + expansion back

Objev podobné jako Lock Module with 2 Keys, ET401 8" & 10"

Keystone modul RJ45 stíněný, 10 Gb, třída Ea, 4PPoE Tento produkt je stíněný Keystone modul RJ45 s podporou přenosové rychlosti až 10 Gb. Je kategorizován jako Cat.6A/10 Gb a splňuje normy třídy Ea. Navíc je kompatibilní s 4PPoE. Technické specifikace Délka: 41,00mm Šířka: 17,00mm Výška: 26,00mm Váha: 0,03kg Minimální teplota okolí: -10°C Maximální teplota okolí: 60°C SCHRACK Formát: SFA Počet portů: 1 Další informace Pro více informací o tomto produktu, navštivte web výrobce.

Objev podobné jako Keystone modul RJ45 stíněný, 10 Gb, třída Ea, 4PPoE

Expansion module, SE4770 barcode scanner (1D, 2D), range: 1.6 inch to 36.3 inch, rotating hand strap, fits for: ET5X (Android, 10'').

Objev podobné jako Zebra ZBK-ET5X-10SCN7-02 expansion module, 2D, Android, 10''

Deko-Light Grumium – hranaté nástěnné venkovní svítidlo, CCT, 10 W, tmavě šedéNástěnné přisazené svítidlo Deko-Light Grumium v hranatém provedení je ideální volbou pro moderní a funkční osvětlení venkovních prostor. Jeho minimalistický design a robustní tělo z tlakově litého hliníku v tmavě šedé barvě perfektně doplní fasády, vstupy do domu nebo terasy. Díky vysokému krytí IP54 je svítidlo odolné vůči prachu a stříkající vodě, což zajišťuje dlouhodobou spolehlivost v exteriéru.Klíčové vlastnosti Nastavitelná teplota chromatičnosti (CCT): Jednoduché přepínání mezi teplým (3000 K) a neutrálním bílým světlem (4000 K) v závislosti na požadované atmosféře. Energeticky úsporné LED: Integrovaný LED modul s příkonem 10 W a světelným tokem 440 lm pro efektivní osvětlení bez vysoké spotřeby energie. Široký úhel vyzařování: Svítidlo svítí do stran v úhlu 150°, což zajišťuje rovnoměrné rozložení světla. Kvalitní materiály: Tělo z hliníku a difuzor z mléčného plastu pro příjemné rozptýlení světla a dlouhou životnost. Univerzální použití: Vhodné pro venkovní zdi domů, vstupy, chodby, terasy i balkony. Bezúdržbový provoz: LED zdroj není nutné měnit, svítidlo je navrženo na dlouhou životnost.Technické parametry Vstupní napětí: 220–240 V AC / 50–60 Hz Příkon: 10 W Světelný tok: 440 lm Teplota chromatičnosti: 3000 K (teplá bílá) / 4000 K (neutrální bílá) Index podání barev CRI: ≥ 80 Energetická třída: F Rozměry: 100 × 70 × 200 mm Hmotnost: 812 g Stupeň krytí: IP54 Materiál: Hliník, plast Barva: Tmavě šedá Montáž: Nástěnná, přisazená Provozní teplota: -20 °C až +40 °C Životnost: 30 000 hProč zvolit toto svítidlo?Deko-Light Grumium je univerzální řešení pro každého, kdo hledá spolehlivé a designové venkovní osvětlení s možností volby barvy světla. Vysoká kvalita zpracování, nízké provozní náklady a jednoduchá instalace činí z tohoto modelu favorita pro moderní exteriéry.Trust badges & garance Životnost LED: 30 000 hodin Záruka: 2 roky Certifikace: CE Krytí: IP54 – odolné vůči prachu a voděFAQ – Často kladené otázky Lze svítidlo stmívat?Ne, tento model není stmívatelný. Je možné vyměnit LED zdroj?LED zdroj není uživatelsky vyměnitelný, případnou výměnu provádí autorizovaný technik.

Objev podobné jako Light Impressions Deko-Light nástěnné přisazené svítidlo Grumium hranaté CCT V 220-240V AC/50-60Hz 10,00 W 3000/4000 K 440 lm 100 mm tmavěšedá 620127

LUCIS CHARON PMMA – stropní a nástěnné svítidlo s akrylátovým sklem, 10,7 W LED, 3000KLUCIS CHARON PMMA S26.L3.CA2 je moderní stropní i nástěnné svítidlo, které v sobě spojuje minimalistický design a vysokou funkčnost. Díky elegantnímu polokulovému tvaru a matnému akrylátovému sklu působí decentně a zároveň poskytuje rovnoměrné, příjemně rozptýlené světlo vhodné do komerčních i rezidenčních interiérů.Klíčové vlastnosti svítidla Úsporný LED zdroj – integrovaný LED modul o příkonu 10,7 W s nízkou spotřebou energie a dlouhou životností 50 000 hodin. Vysoká kvalita světla – index podání barev Ra >90 zajišťuje realistické a věrné zobrazení barev. Příjemná barva světla – teplá bílá 3000K podporuje útulnou atmosféru v domácnosti i reprezentativních prostorách. Univerzální využití – možnost montáže na strop i stěnu, ideální pro chodby, vstupní haly, kanceláře nebo školy. Odolné materiály – stínítko z akrylátového skla PMMA, těleso z bíle lakovaného ocelového plechu. Rozměry – průměr 300 mm, výška 115 mm, hmotnost 1,2 kg.Proč zvolit LUCIS CHARON PMMA?Toto svítidlo je synonymem pro spolehlivost a moderní design. Nabízí vynikající světelné parametry a vysokou odolnost vůči nárazům i běžnému provozu. Jeho snadná údržba a dlouhodobá životnost z něj činí ideální volbu nejen do domácností, ale také do veřejných a komerčních prostor, kde je kladen důraz na kvalitu osvětlení a design.Technické specifikace Příkon: 10,7 W Světelný tok: 1143 lm Barva světla: 3000K (teplá bílá) Index podání barev: Ra >90 Rozměry: ø 300 mm, výška 115 mm Materiál: akrylátové sklo (PMMA), ocelový plech Montáž: stropní i nástěnná Stmívatelné: ne Včetně světelného zdroje: anoTrust badges & garance Životnost LED: 50 000 h Záruka výrobce: 5 let Certifikace: CEDoporučení architektaDíky svému neutrálnímu designu je svítidlo LUCIS CHARON PMMA perfektní volbou do minimalistických interiérů, kde vynikne kvalita světla a čistota linií. Doporučuji jej instalovat do větších prostor, kde vyžadujete rovnoměrné a příjemné osvětlení – například vstupní haly, chodby, kanceláře nebo čekárny. Kombinace s dalšími svítidly z kolekce CHARON zajistí stylovou jednotu celého prostoru.FAQ – Často kladené otázky Je toto svítidlo stmívatelné? Ne, svítidlo není stmívatelné. Je navrženo pro stabilní, kvalitní osvětlení. Jaký je doporučený způsob údržby? Doporučujeme pravidelné čištění suchým nebo mírně navlhčeným hadříkem. Nepoužívejte agresivní čistící prostředky, abyste zachovali kvalitu materiálu.

Objev podobné jako LUCIS stropní a nástěnné svítidlo CHARON PMMA 10,7W LED 3000K akrylátové sklo S26.L3.CA2

Zebra internal standard battery, 7,600 mAh, fits for: ET401 (10")

Objev podobné jako Zebra BTRY-ET401-10INC-01 internal Standard Battery, 10"

Rugged Boot, fits for: ET401 (10" with Scanner)

Objev podobné jako Zebra SG-ET401-10EXO-01 Rugged Boot, 10"

Rugged Boot, fits for: ET401 (10" without Scanner)

Objev podobné jako Zebra SG-ET401-10EXO-02 Rugged Boot, 10"

Passive Mount - Zebra ET401 10" with Rugged Frame + Expansion Back

Objev podobné jako Passiv Mount, ET401 10"

Active mount with cigarette lighter plug + USB HOST - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, cigarette lighter plug, USB-Host, ET401 10"

Active mount with cigarette lighter plug - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, cigarette lighter plug, ET401 10"

Active mount for fixed installation + USB HOST - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, Fixed installation, USB-Host, ET401 10"

Active mount for fixed installation - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, Fixed installation, ET401 10"

Active mount with lockable cigarette lighter plug + USB HOST - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, lockable cigarette lighter plug, USB-Host, ET401 10"

Active mount with lockable cigarette lighter plug - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, lockable cigarette lighter plug, ET401 10"

Active mount with lock, USB-C with cigarette lighter adapter - Zebra ET401 10" (without rugged frame)

Objev podobné jako Active Mount with Lock, USB-C Cigarette lighter adapter, ET401 10"

Active mount for fixed installation, lockable + USB HOST - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, Fixed installation, lockable, USB-Host, ET401 10"

Active mount for fixed installation, lockable - Zebra ET401 10" with rugged frame + expansion back

Objev podobné jako Active Mount, Fixed installation, lockable, ET401 10"

Active mount with lock, USB-C for fixed installation - Zebra ET401 10" (without rugged frame)

Objev podobné jako Active Mount with Lock, USB-C, fixed Installation, ET401 10"

Passive mount with lock - Zebra ET401 10" (without rugged frame)

Objev podobné jako Passive Mount, with Lock, ET401 10"

Passive mount with retention lock - Zebra ET401 10" (without rugged frame)

Objev podobné jako passive Mount, retention Lock, ET401 10"

Active mount with retention lock, USB-C with cigarette lighter adapter - Zebra ET401 10" (without rugged frame)

Objev podobné jako Active Mount, Retention Lock, USB-C, Cigarette lighter adapter, ET401 10"

Active mount with retention lock, USB-C for fixed installation - Zebra ET401 10" (without rugged frame)

Objev podobné jako Active Mount, Retention Lock, USB-C, Fixed Installation, ET401 10"

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PCLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PCLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE11PCLU Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PDCLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PDCLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE11PDCLU Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11PKLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keyInput Connector: 5.5mm DCAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE11PKLU Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11KLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with keysAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11KLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE11KLU Form-Fit Holder (Key-Locking) for Zebra ET51/56 (10")

This RAM Mounts Form-Fit (combo-locking) holder is suitable for Zebra ET5x 10.1“ Series with rugged boot.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a scanner, hand strap or PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE11CLU:Compatible with the Zebra tablet accessoiresEasy insertion and removalPrepared for mounting additional devices such as handheldsLockable with combo-lockingAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE11CLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE11CLU Form-Fit Holder (Combo-Locking) for Zebra ET51/56 (10")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE21PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE21PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra ET40 & ET45 10“ series with Rugged Boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-ZE21PKLU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesOnly for Zebra Tablets within Rugged BootLockable with keyInput Connector: 5.5mm DCInput Cable Length: ca. 100 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To support the tablet without the Rugged Frame, see RAP-INSERT-ZE21LU.This dock is not compatible with IntelliSkin.For IntelliSkin with GDS Tech, see RAM-GDS-DOCKL-ZE21PU.Devices shown are not included in the delivery.Only the RAM-HOL-ZE21PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE21PKLU Form-Fit Holder (Key-Locking) for Zebra ET40/45 (10")

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

Příslušenství pro modeláře Pinzeta pro uchycení Fine Serrated Locking Tweezers 50821 ve stříbrném provedení od předního výrobce Italeri dobře poslouží všem příznivcům modelářství. Jedná se o speciální nástroj pro jemnou manipulaci s dílky. Modelářská pinzeta je dodávána v blistru. Klíčové vlastnosti pinzety pro uchycení Fine Serrated Locking Tweezers 50821Pinzeta pro uchycení Fine Serrated Locking Tweezers 50821 ve stříbrném provedeníIdeální na jemnou manipulaci s dílky nebo jejich uchyceníVhodné příslušenství pro všechny modelářské nadšenceBalena v praktickém blistruDélka:160 mm

Objev podobné jako Fine serrated locking tweezers - 160mm 50821 - pinzeta pro uchycení (8001283508216)

Zebra internal standard battery, 6,100 mAh, fits for: ET401 (8")

Objev podobné jako Zebra BTRY-ET401-08INC-01 internal Standard Battery, 8"

Rugged Boot, fits for: ET401 (8" with Scanner)

Objev podobné jako Zebra SG-ET401-08EXO-01 Rugged Boot, 8"

Rugged Boot, fits for: ET401 (8" without Scanner)

Objev podobné jako Zebra SG-ET401-08EXO-02 Rugged Boot, 8"

Tablet PC, screen size: 25.4 cm (10''), capacitive, multi touch, resolution: 1920x1200 pixels, speaker, Camera (16 MP), front camera (8 MP), vibration, brightness 600cd, connection: USB-C, Bluetooth, Wi-Fi (Wi-Fi 7 (802.11be)), NFC, Micro SD-Slot, Qualcomm Octa Core, 2.0 GHz, RAM: 6 GB, Flash: 64 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, removable battery, protection class: IP68, colour: black

Objev podobné jako Zebra ET401 ET4010B-00101B0P-A6, No Scan-Engine, 25.4 cm (10''), USB-C, BT, Wi-Fi (Wi-Fi 7), NFC, Android, GMS, RB, black

Tablet PC, 2D, imager (SE4100), screen size: 25.4 cm (10''), capacitive, multi touch, resolution: 1920x1200 pixels, speaker, Camera (16 MP), front camera (8 MP), vibration, brightness 600cd, connection: USB-C, Bluetooth, Wi-Fi (Wi-Fi 7 (802.11be)), NFC, Micro SD-Slot, Qualcomm Octa Core, 2.0 GHz, RAM: 6 GB, Flash: 64 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, removable battery, protection class: IP68, colour: black

Objev podobné jako Zebra ET401 ET4010B-001C1B0P-A6, 2D, SE4100, 25.4 cm (10''), USB-C, BT, Wi-Fi (Wi-Fi 7), NFC, Android, GMS, RB, black

Tablet PC, 2D, imager (SR500), screen size: 25.4 cm (10''), capacitive, multi touch, resolution: 1920x1200 pixels, GPS, speaker, Camera (16 MP), front camera (8 MP), vibration, brightness 600cd, connection: USB-C, Bluetooth, Wi-Fi (Wi-Fi 7 (802.11be)), SIM, eSIM, 5G, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.0 GHz, RAM: 6 GB, Flash: 64 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, removable battery, protection class: IP68, colour: black

Objev podobné jako Zebra ET401 ET401EB-301P1B2P-A6, 2D, SR500, 25.4 cm (10''), GPS, USB-C, BT, Wi-Fi (Wi-Fi 7), eSIM, 5G, NFC, Android, GMS, RB, black

Tablet PC, 2D, imager (SE4100), screen size: 25.4 cm (10''), capacitive, multi touch, resolution: 1920x1200 pixels, speaker, Camera (16 MP), front camera (8 MP), vibration, brightness 600cd, connection: USB-C, Bluetooth, Wi-Fi (Wi-Fi 7 (802.11be)), NFC, Micro SD-Slot, Qualcomm Octa Core, 2.0 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, removable battery, protection class: IP68, colour: black

Objev podobné jako Zebra ET401 ET4010B-001C2B0P-A6, 2D, SE4100, 25.4 cm (10''), USB-C, BT, Wi-Fi (Wi-Fi 7), NFC, Android, GMS, RB, black

Tablet PC, 2D, imager (SR500), screen size: 25.4 cm (10''), capacitive, multi touch, resolution: 1920x1200 pixels, GPS, speaker, Camera (16 MP), front camera (8 MP), vibration, brightness 600cd, connection: USB-C, Bluetooth, Wi-Fi (Wi-Fi 7 (802.11be)), SIM, eSIM, 5G, NFC, Micro SD-Slot, Qualcomm Octa Core, 2.0 GHz, RAM: 8 GB, Flash: 128 GB, Android, incl.: Google Mobile Services, battery, 7600 mAh, removable battery, protection class: IP68, colour: black

Objev podobné jako Zebra ET401 ET401EB-301P2B2P-A6, 2D, SR500, 25.4 cm (10''), GPS, USB-C, BT, Wi-Fi (Wi-Fi 7), eSIM, 5G, NFC, Android, GMS, RB, black

Passive Mount - Zebra ET401 8" with Rugged-Frame + Expansion Back

Objev podobné jako Passive Mount - Zebra ET401 8"

Active mount with cigarette lighter plug + USB HOST - Zebra ET401 8" with rugged frame + expansion back

Objev podobné jako Active Mount,cigarette lighter plug, USB-Host, ET401 8"

Active mount with cigarette lighter plug - Zebra ET401 8" with rugged frame + expansion back

Objev podobné jako Active Mount - ET401 8"

Active mount for fixed installation + USB HOST - Zebra ET401 8" with rugged frame + expansion back

Objev podobné jako Active Mount, Fixed installation, USB-Host, ET401 8"

Active mount for fixed installation - Zebra ET401 8" with rugged frame + expansion back

Objev podobné jako Active Mount, Fixed installation, ET401 8"

Active mount with lockable cigarette lighter plug + USB HOST - Zebra ET401 8" with rugged frame + expansion back

Objev podobné jako Active Mount, lockable cigarette lighter plug, USB-Host, ET401 8"

Active mount with lockable cigarette lighter plug - Zebra ET401 8" with rugged frame + expansion back

Objev podobné jako Active Mount, lockable cigarette lighter plug, ET401 8"

Active mount with lock, USB-C with cigarette lighter adapter - Zebra ET401 8" (without rugged frame)

Objev podobné jako Active Mount with Lock, USB-C Cigarette lighter adapter, ET401 8"