kozena kabelka coach tabby chain clutch in signature canvas

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, Tab S9 & Tab S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 35 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM78CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ in IntelliSkin Protective Sleeve - USB-C Power Supp

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

praktický držák na kabelku
skladný držák na kabelku
kabelky na telefon
stylové kabelky
PiNK! kabelka
designové kabelky
kabelka na sklenku
kabelka na sklenku Sektu
ručně vyráběná kabelka
kabelka pro dámu
originální ručně vyráběná kabelka
sektní kabelka
kabelka na lahev

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CU: Compatible with GDS hand-stand & more Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Transfer Speed: 5Gbps Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Power Supply

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connect

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Dual USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C 3.1 Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62-MMU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Multi-Mode - USB-C & USB-A Co

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-CAU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPT-CAU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-1AU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-A 1.1 (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM60CPN-1AU holder is supplied.

Objev podobné jako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts EZ-Roll’r Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM60CPN-CAU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM60CPN-CAU holder is supplied.

Objev podobné jako RAM Mounts EZ-Roll'r Modular Holder for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C and USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CAU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLN-CAU holder is supplied.

Objev podobné jako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector

This RAM Mounts Modular Form-Fit holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLN-CU: Compatible with accessories Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Output Connector: USB-C (Peripheral output - 500mAh) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLN-CU holder is supplied.

Objev podobné jako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Power & Data Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. The included RAM NFC extender supports the NFC function with a range of up to 30 cm. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, GDS Roto-Mag and side accessory attachments. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKL-NFCU: Compatible with accessories Including RAM NFC-Extender Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKL-NFCU holder is supplied.

Objev podobné jako RAM Mounts Form- Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Modular Form-Fit (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle is compatible with most RAM dock accessories including Temperature Control Accessories, RAM NFC-Extender, GDS Roto-Mag, and side accessory attachments. Modular docks are not compatible with the GDS Hand-Stand. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLNU: Compatible with accessories and side accessory attachments Can only be used with OEM or RAM skin Access to the stylus pen Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLNU holder is supplied.

Objev podobné jako RAM Mounts Modular Form-Fit Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLT-AU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral & data support is provided by the built-in dual USB-A & RJ45 (ethernet) cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLT-RJ45AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Output Connector: USB-A & RJ45 (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLT-RJ45AU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & Dual USB-A & RJ45(Ethernet) Conne

This RAM Mounts Form-Fit Low Profile (Key-Locking) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPKLTU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal Lockable with key Charging function Input Connector: USB-C Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPKLTU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Key-Locking) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C Connector

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-1AU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Transfer-Speed: 12Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPT-1AU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-A Connector

Technic Cosmetics 3-In-1 Canvas, 8 ml, Korektory pro ženy, Chcete, aby vaše líčení nebo i téměř nenalíčený obličej nekazila ani jediná chybička na kráse? Ať už se vám na pleti nelíbí cokoli, korektor Technic Cosmetics 3-In-1 Canvas to spolehlivě zakryje. Vysoce pigmentované složení si poradí s kruhy pod očima, pupínky, pigmentovými skvrnami a nejrůznějším zarudnutím, ale třeba i pihami, pokud je budete chtít skrýt. Pomůže vám zkrátka zamaskovat veškeré nedokonalosti pleti natolik dokonale, že o nich budete vědět jen vy. Spolehněte se na korektor, který dodá vaší tváři zcela bezchybný, barevně jednotný vzhled. Vlastnosti: dlouhotrvající efekt sjednocuje odstín pleti snadno se aplikuje rozjasňuje pleť krémová textura Složení: veganský produkt Jak používat: Pomocí aplikátoru naneste korektor na místo, které si přejete zamaskovat. Rozetřete do ztracena.

Objev podobné jako Technic Cosmetics 3-In-1 Canvas dlouhotrvající korektor odstín Porcelain 8 ml

Technic Cosmetics 3-In-1 Canvas, 8 ml, Korektory pro ženy, Chcete, aby vaše líčení nebo i téměř nenalíčený obličej nekazila ani jediná chybička na kráse? Ať už se vám na pleti nelíbí cokoli, korektor Technic Cosmetics 3-In-1 Canvas to spolehlivě zakryje. Vysoce pigmentované složení si poradí s kruhy pod očima, pupínky, pigmentovými skvrnami a nejrůznějším zarudnutím, ale třeba i pihami, pokud je budete chtít skrýt. Pomůže vám zkrátka zamaskovat veškeré nedokonalosti pleti natolik dokonale, že o nich budete vědět jen vy. Spolehněte se na korektor, který dodá vaší tváři zcela bezchybný, barevně jednotný vzhled. Vlastnosti: dlouhotrvající efekt sjednocuje odstín pleti snadno se aplikuje rozjasňuje pleť krémová textura Složení: veganský produkt Jak používat: Pomocí aplikátoru naneste korektor na místo, které si přejete zamaskovat. Rozetřete do ztracena.

Objev podobné jako Technic Cosmetics 3-In-1 Canvas dlouhotrvající korektor odstín Ivory 8 ml

Kvalitní kožená kabelka s efektním proplétáním, v patchworkovém provedení. Velmi prostorná, s 2 hlavními kapsami na zip, přihrádkou na deštník v dolní části a s nastavitelným ramenním popruhem.

Objev podobné jako Kožená kabelka

Kvalitní kožená kabelka přes rameno v patchworkovém provedení. Popruh přes rameno o délce 60 cm. Vnitřní kapsa na zip. Pravá kůže. 5 vnějších kapes.

Objev podobné jako Kožená kabelka

Výborný společník, pokud hodně často cestujete: vysoce kvalitní kožená kabelka přes rameno v patchworkovém stylu. Uvnitř 1 kapsa na zip. Uvnitř 1 kapsa na zip. 5 vnějších kapsiček. Pravá kůže. Popruh přes rameno o délce 60 cm.

Objev podobné jako Kožená kabelka

Černá kožená kabelka přes rameno s kamínky - 12*18 cm Barva: černá, stříbrnáMateriál: Polyester

Objev podobné jako Černá kožená kabelka přes rameno s kamínky - 12*18 cm Clayre & Eef

Hnědo-černá kožená kabelka přes rameno Vintage - 47*36cm Barva: multiMateriál: kůže / bavlna / polyesterHmotnost: 0,7 kg

Objev podobné jako Hnědo-černá kožená kabelka přes rameno Vintage - 47*36cm Mars & More

Kožená kabelka přes rameno Vintage - 37*7*33cm Barva: multiMateriál: kůže / bavlnaHmotnost: 1 kg

Objev podobné jako Kožená kabelka přes rameno Vintage - 37*7*33cm Mars & More

Hnědá kožená kabelka přes rameno Mitti - 35*27cm Barva: bílá/hnědáMateriál: KůžeHmotnost: 0,61 kg

Objev podobné jako Hnědá kožená kabelka přes rameno Mitti - 35*27cm Mars & More

Kožená kabelka Croosbody z králičí kůže - 16*22*2cm Barva: multiMateriál: králíčí kůžeHmotnost: 0,12 kg

Objev podobné jako Kožená kabelka Croosbody z králičí kůže - 16*22*2cm Mars & More

Černo hnědá kožená kabelka přes rameno Giraffe - 27*22*0,7 cm Barva: černo hnědáMateriál: hovězí kůžeHmotnost: 0,4 kg

Objev podobné jako Černo hnědá kožená kabelka přes rameno Giraffe - 27*22*0,7 cm Mars & More

Kožená kabelka crossbody z hovězí kůže hnědá/bílá - 32*15*15cm Barva: hnědá/bíláMateriál: kůže hovězí / bavlnaHmotnost: 0,57 kg

Objev podobné jako Kožená kabelka crossbody z hovězí kůže hnědá/bílá - 32*15*15cm Mars & More

Černá kožená kabelka přes rameno se vzorem krokodýlí kůže - 19*14*5cm Barva: černáMateriál: hovězí kůže

Objev podobné jako Černá kožená kabelka přes rameno se vzorem krokodýlí kůže - 19*14*5cm Mars & More

Hnědá kulatá kožená kabelka crossbody zdobená ovčí vlnou - 24*8*24cm Barva: hnědá/ přírodní bíláMateriál: kůže / ovčí vlna

Objev podobné jako Hnědá kulatá kožená kabelka crossbody zdobená ovčí vlnou - 24*8*24cm Mars & More

Hnědá kožená kabelka crossbody s dlouhým vlasem Tibet Goat - 20*2*24cm Barva: hnědá/ přírodní bíláMateriál: kůže / tibetká koza

Objev podobné jako Hnědá kožená kabelka crossbody s dlouhým vlasem Tibet Goat - 20*2*24cm Mars & More

Dámská kožená kabelka VUCH LISON má šmrnc! Nevšední střih zaujme a upoutá pozornost mnoha očí. A nemějte jim za zlé, že vám ji budou trochu závidět. Je totiž fakt krásná, ale přitom jednoduchá a čistá svým designem i provedením.

Objev podobné jako VUCH LISON Dámská kožená kabelka, růžová, velikost

Pouzdro na mobil a peněženka v jednom Délka cca 19 cm Extra kapsa na mobilní telefon na vnější straně Vnitřní přihrádky na karty, peníze a mince. Vyrobeno z robustní hovězí kůže S elegantními raženými ornamenty Délkově nastavitelný ramenní popruh Značková kvalita od HJP Kabelka v kompaktním formátu: taštička přes rameno HJP na mobilní telefon. Ať už jste na cestách, na nákupech nebo v práci: praktická kabelka přes rameno na mobilní telefon zajistí, že budete mít vše, co potřebujete, vždy s sebou. Peníze, karty, vstupenky atd. jsou v ní hned po ruce. A ty tak budete mít vždy volné! To je praktické a dává vám to určitou svobodu v mnoha každodenních situacích: v supermarketu s nákupním vozíkem, s dětmi nebo třeba balíkem na poště... Je mnoho okamžiků, kdy se taková věc hodí! Stylový módní doplněk Kabelka přes rameno HJP na mobil je nejen praktická, ale také velmi módní doplněk. Kůže má po celém povrchu ražbu s úponkovým dekorem. Z praktického společníka pro každodenní život se tak stane prvek, který stále budete chtít nosit s sebou. Ramenní popruh lze nastavit, sami se tedy rozhodnete, jak se cítíte nejpohodlněji. Navíc se dá i úplně odstranit. • přihrádka na mobilní telefon s magnetickým zavíráním, na mobilní telefony do velikosti cca 17 x 8 cm • velká kapsa na zip • uvnitř 2 velké přihrádky, 10 přihrádek na karty, přihrádka na zip na mince • délkově nastavitelný ramenní popruh, odnímatelný pomocí karabiny Rozměry: cca 10 x 18,5 x 3,5 cm

Objev podobné jako Weltbild Dámská kožená kabelka na mobil Tendrils, magenta

Napájecí kabel ​​Napájecí kabel typu „daisy chain“ s osmi lomenými konektory pro napájení až osmi kytarových efektů současně jedním adaptérem. Délka kabelu mezi dvěma konektory odpovídá 30 cm.

Objev podobné jako Rockboard Flat Daisy Chain Cable - 8 Outputs, Angled

Napájecí kabel ​​Napájecí kabel typu „daisy chain“ s osmi rovnými konektory pro napájení až osmi kytarových efektů současně jedním adaptérem. Délka kabelu mezi dvěma konektory odpovídá 30 cm.

Objev podobné jako Rockboard Flat Daisy Chain Cable - 8 Outputs, Straight

Napájecí kabel Napájecí kabel typu „daisy chain“, který vám umožní napájet až 5 kytarových efektů současně jedním napájecím adaptérem.

Objev podobné jako Caline 1TO5 Daisy Chain

The RAM® Screen Protector for Samsung Tab A9+ with IntelliSkin® Thin-Case™ (RAP-SKIN-SP-2) is a custom-fit tempered glass screen protector engineered to pair seamlessly with the device's IntelliSkin® Thin-Case™. Designed for rugged environments, this screen protector delivers shatterproof, scratch-resistant protection to keep your device safe in demanding field conditions. Featuring a 2.5D edge profile for a smoother tactile experience, the high-definition glass ensures crystal-clear clarity without compromising touch sensitivity.The ultra-responsive surface maintains full touchscreen compatibility, including with Apple Pencil. Installation is fast and bubble-free, making it easy to equip your device with long-lasting protection. When combined with IntelliSkin® Thin-Case™, this screen protector offers enterprise-grade defense for professionals who rely on their devices in the field.FeaturesShaterproof and scratch-resistant screen protector for Samsung Tab A9+ secured in IntelliSkin® Thin-Case™Includes application kit for easy installation2.5D edge profileHigh-definition (HD) tempered glassMaterial(s) - 2.5D HD Clear Tempered Glass

Objev podobné jako RAM® Screen Protector for Samsung Tab A9+ with IntelliSkin® Thin-Case™

The RAM® Screen Protector for Samsung Tab Active5 & 3 (RAP-SKIN-SP-4) is a custom-fit tempered glass screen protector engineered to pair seamlessly with all IntelliSkin® cases. Designed for rugged environments, this screen protector delivers shatterproof, scratch-resistant protection to keep your device safe in demanding field conditions. Featuring a 2.5D edge profile for a smoother tactile experience, the high-definition glass ensures crystal-clear clarity without compromising touch sensitivity.The ultra-responsive surface maintains full touchscreen compatibility, including with Apple Pencil. Installation is fast and bubble-free, making it easy to equip your device with long-lasting protection. When combined with IntelliSkin®, this screen protector offers enterprise-grade defense for professionals who rely on their devices in the field.FeaturesShaterproof and scratch-resistant screen protector for Samsung Tab Active5 & 3 in any IntelliSkin®Includes application kit for easy installation2.5D edge profileHigh-definition (HD) tempered glassMaterial(s) - 2.5D HD Clear Tempered Glass

Objev podobné jako RAM® Screen Protector for Samsung Tab Active5 & 3

Kabelka do ruky, malá velikost, vhodná do města, designové zpracování, žádný vzor s dlouhým uchem, zapínání na zip, kožené provedení Kabelka SEGALI přinese radost každé ženě. Kabelku oceníte kdekoliv na svých cestách - ve městě i v přírodě

Objev podobné jako Kožená kabelka etue Segali A2 červená (943P)

Kabelka s praktickým členěním a velkým dvoudílným hlavním prostorem na zip, četnými kapsičkami a vnější kapsou na mobilní telefon. S nastavitelným ramenním popruhem.Vpředu 1 vnější kapsa + 2 přihrádky na zip. Zadní strana s velkou přihrádkou na zip. Boční kapsa na mobil. Pravá kůže.

Objev podobné jako Kožená kabelka Patchwork

Pravý čas na novou elegantní kabelku z pravé kůže v módním patchworkovém designu! Pečlivé zpracování a inteligentní členění: velká zdvojená hlavní kapsa se zapínáním na zip, několik dalších zipových přihrádek a vnějších kapes. Zadní strana s velkou kapsou na zip. 1 vnější kapsa vpředu + 2 zipové přihrádky. Boční kapsa na mobil. Pravá kůže. modrá.

Objev podobné jako Kožená kabelka Patchwork

Je čas na novou elegantní kabelku z pravé kůže v módním patchworkovém vzhledu! Pečlivě zpracovaná a inteligentně členěná: s velkou dvoudílnou hlavní přihrádkou na zip a četnými přihrádkami a vnější kapsou - samozřejmě na Váš mobil. S nastavitelným ramenním popruhem.1 vnější kapsa + 2 přihrádky na zip. Velká přihrádka na zip na zadní straně. Postranní kapsa na telefon. Pravá kůže .

Objev podobné jako Kožená kabelka Patchwork

Nástrojový kabel Kabely značky PRS ze série Signature jsou pečlivě navrženy a vyráběny tak, aby přenesly váš tón zcela čistě a bez jakéhokoliv rušení. Pravděpodobně jste věnovali spoustu času a peněz výběru vaší kytary, aparátu a efektů, proč je tedy nespojit tím úplně nejlepším? Kabely PRS jsou vyráběny přímo v Anglii firmou VanDamme Cabling – jejich produkty naleznete nejen u hvězd jako Radiohead, Coldplay a Foo Fighters, ale také v Abbey Road Studios.

Objev podobné jako PRS Signature Instrument Cable 10' Straight