k m 19796 tablet pc holder

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2U: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4PDU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4PU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device s internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4PDKLU Form-Fit Holder (Key-Locking) for Getac ZX10

This RAM Mounts Form Fit (combo-locking) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PD2CLU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionLockable with comboPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transferspeed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PD2CLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PD2CLU Form-Fit Holder (Combo-locking) for Honeywell RT10

This RAM Mounts Form Fit (combo-locking) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PCLU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionLockable with comboPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PCLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PCLU Form-Fit Holder (Combo-locking) for Honeywell RT10

This RAM Mounts Form Fit (combo-locking) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PDCLU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionLockable with comboPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PDCLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PDCLU Form-Fit Holder (Combo-locking) for Honeywell RT10

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PDU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionWith LatchPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PDU Form-Fit Holder (Latch) for Honeywell RT10

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PDKLU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionLockable with keyPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PDKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PDKLU Form-Fit Holder (with key-locking) for Honeywell RT10

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PKLU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionLockable with keyPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PKLU Form-Fit Holder (Key-locking) for Honeywell RT10

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell RT10 Rugged Tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back.Tablet accessories such as a hand strap or extended battery pack can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-HON9PU:Compatible with accessories e.g. hand strap or extended battery Easy insertion and removalCharging functionWith LatchPrepared for mounting additional devices such as handheldsInput Connector: 5.5mm DC-ConnectorAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON9PU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON9PU Form-Fit Holder (Latch) for Honeywell RT10

Az Eva Solo Smartmat egy dubfából készült padka, amely serpenyők és fazekak alatt használható hővédőként, ugyanakkor állványként szolgál okostelefonok vagy tabletek számára. A tablet több különböző szögben állítható, megkönnyítve az online receptek követését vagy tartalomnézéset. A termék könnyen tisztítható, és dekoratív kiegészítőként is funkcionál a konyhában.

• Kétfunkciós konyhai eszköz: hőálló padka és okoseszköz-tartó
• Dekoratív dubfa anyag, több beállítási szög a tablethez
• Könnyű tisztítás, hőálló és higiénikus felület

Objev podobné jako Dřevěná podložka pod hrnec/stojan na tablet Smartmat Eva Solo

Tablet PC, 2D, imager (standard range, N6703), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L1N-17C12S0E 2D, SR, USB, BT, Wi-Fi, 4G, NFC, Android, GMS tablet

Tablet PC, 2D, imager (6803FR), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L0N-18C22S0E 2D, USB, BT, Wi-Fi, NFC, Android tablet

Tablet PC, 2D, imager (6803FR), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L1N-18C12S0E 2D, USB, BT, Wi-Fi, 4G, NFC, Android, GMS tablet

Tablet PC, 2D, imager (6803FR), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, extended, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L1N-18C12E0E 2D, USB, BT, Wi-Fi, 4G, NFC, Android, GMS, ext. bat. tablet

Tablet PC, 2D, imager (6803FR), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L1N-18C22S0E 2D, USB, BT, Wi-Fi, 4G, NFC, Android tablet

Tablet PC, 2D, imager (6803FR), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L1N-18C12S1E Outdoor, 2D, USB, BT, Wi-Fi, 4G, NFC, Android, GMS tablet

Tablet PC, 2D, imager (standard range, N6703), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, 4G (LTE), NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L1N-17C12S1E Outdoor, 2D, SR, USB, BT, Wi-Fi, 4G, NFC, Android, GMS tablet

Tablet PC, 2D, imager (standard range, N6703), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L0N-17C12S0E 2D, SR, USB, BT, Wi-Fi, NFC, Android, GMS tablet

Tablet PC, 2D, imager (6803FR), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L0N-18C12S0E 2D, USB, BT, Wi-Fi, NFC, Android, GMS tablet

Tablet PC, 2D, imager (6803FR), 25,7cm (10,1 ), Cam (13MP), front camera (8MP), brightness: 800cd, USB (3.0, type A, type C), Bluetooth, Wi-Fi (802.11ac), audio, NFC, Micro SD-Slot, resolution: 1920x1200 pixels, Qualcomm Octa Core, 2.2GHz, RAM: 4 GB, Flash: 32 GB, Android (9.0), protection class: IP65, incl.: power supply unit, Google Mobile Services, battery, extended, stylus-pen, order separately: power cable.

Objev podobné jako Honeywell RT10A RT10A-L0N-18C12E0E 2D, USB, BT, Wi-Fi, NFC, Android, GMS, ext. bat. tablet

Tablet PC, fully rugged, RFID reader, 13.56 MHz, screen size: 25.7 cm (10.1 ), capacitive, multi touch, resolution: 1920x1200 pixels, speaker, Camera (13 MP), front camera (5 MP), vibration, brightness 1000cd, connection: USB (type A), Thunderbolt 4, Bluetooth, Wi-Fi, Intel Core Ultra 5, RAM: 16 GB, SSD: 256 GB, Win, 11 Professional, incl.: power supply unit, power cable (EU, UK), battery, 4070 mAh, stylus-pen, hard handle, IP66, MIL-STD 810H

Objev podobné jako Getac UX10G5, Tablet Hard Handle, 25,7cm (10,1

Příslušenství pro dron Držák DJI Mavic Air 2/2S RC-N1 Remote Controller Tablet Holder je speciálně určený pro tablet. Spolehlivě přitom udrží tablety o velikosti 7-10" a kompatibilní je s ovladačem RC-N1. Držák je vyrobený z velmi kvalitních materiálů. DJI Mavic Air 2/2S RC-N1 Remote Controller Tablet Holder zajistí stabilní upevnění tabletu. Klíčové vlastnosti držáku DJI Mavic Air 2/2S RC-N1 Remote Controller Tablet HolderDržák určený pro tabletUdrží tablety o velikosti 7-10"Kompatibilní je s ovladačem RC-N1DJI Mavic Air 2/2S RC-N1 Remote Controller Tablet Holder je vyrobený z kvalitních materiálůBarevné provedení: černé

Objev podobné jako DJI Mavic Air 2/2S RC-N1 Remote Controller Tablet Holder (CP.MA.AS000001.01)

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with Keys Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac 4-point hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Buchse Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Certifications: FCC, IC, CE, UKCA, WEEE RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC Power Supply

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Stolní držákpro tablet i mobilVention Smartphone and Tablet Holder je kompatibilní s mobilními telefony a minitablety o velikosti 10,2–20,3 cm (7,9–10,2"). Oceníte možnost nastavení úhlu náklonu a také variabilitu vertikálního i horizontálního uchycení. Stolní držák Vention využijete v kanceláři, kuchyni i na pracovním stole. nbsp; ÚHEL NÁKLONU0–100° ROZMĚRY99 × 85 × 28 mm BARVArůžová Držák Vention je snadno přenositelnýVention Smartphone and Tablet Holder můžete nosit všude s sebou. Díky jeho možnosti složení nezabere téměř žádné místo. Zajisté oceníte jeho protiskluzové nožky pro dobrou stabilitu. Velmi praktická je možnost používání přístroje jak v horizontální, tak ve vertikální poloze. nbsp; Náklon dle potřebyVention Smartphone and Tablet Holder disponuje možností...

Objev podobné jako Vention Smartphone and Tablet Holder Pink (KCAP0)

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Stolní držákpro tablet i mobilVention Smartphone and Tablet Holder je kompatibilní s mobilními telefony a minitablety o velikosti 10,2–20,3 cm (7,9–10,2"). Oceníte možnost nastavení úhlu náklonu a také variabilitu vertikálního i horizontálního uchycení. Stolní držák Vention využijete v kanceláři, kuchyni i na pracovním stole. nbsp; ÚHEL NÁKLONU0–100° ROZMĚRY99 × 85 × 28 mm BARVAzelená Držák Vention je snadno přenositelnýVention Smartphone and Tablet Holder můžete nosit všude s sebou. Díky jeho možnosti složení nezabere téměř žádné místo. Zajisté oceníte jeho protiskluzové nožky pro dobrou stabilitu. Velmi praktická je možnost používání přístroje jak v horizontální, tak ve vertikální poloze. nbsp; Náklon dle potřebyVention Smartphone and Tablet Holder disponuje možností...

Objev podobné jako Vention Smartphone and Tablet Holder Green (KCAC0)

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Stolní držákpro tablet i mobilVention Smartphone and Tablet Holder je kompatibilní s mobilními telefony a minitablety o velikosti 10,2–20,3 cm (7,9–10,2"). Oceníte možnost nastavení úhlu náklonu a také variabilitu vertikálního i horizontálního uchycení. Stolní držák Vention využijete v kanceláři, kuchyni i na pracovním stole. nbsp; ÚHEL NÁKLONU0–100° ROZMĚRY99 × 85 × 28 mm BARVAbílá Držák Vention je snadno přenositelnýVention Smartphone and Tablet Holder můžete nosit všude s sebou. Díky jeho možnosti složení nezabere téměř žádné místo. Zajisté oceníte jeho protiskluzové nožky pro dobrou stabilitu. Velmi praktická je možnost používání přístroje jak v horizontální, tak ve vertikální poloze. nbsp; Náklon dle potřebyVention Smartphone and Tablet Holder disponuje možností...

Objev podobné jako Vention Smartphone and Tablet Holder White (KCAW0)

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Stolní držákpro tablet i mobilVention Smartphone and Tablet Holder je kompatibilní s mobilními telefony a minitablety o velikosti 10,2–20,3 cm (7,9–10,2"). Oceníte možnost nastavení úhlu náklonu a také variabilitu vertikálního i horizontálního uchycení. Stolní držák Vention využijete v kanceláři, kuchyni i na pracovním stole. nbsp; ÚHEL NÁKLONU0–100° ROZMĚRY99 × 85 × 28 mm BARVAzelená Držák Vention je snadno přenositelnýVention Smartphone and Tablet Holder můžete nosit všude s sebou. Díky jeho možnosti složení nezabere téměř žádné místo. Zajisté oceníte jeho protiskluzové nožky pro dobrou stabilitu. Velmi praktická je možnost používání přístroje jak v horizontální, tak ve vertikální poloze. nbsp; Náklon dle potřebyVention Smartphone and Tablet Holder disponuje možností...

Objev podobné jako Vention Smartphone and Tablet Holder Tint (KCAQ0)

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Stolní držákpro tablet i mobilVention Smartphone and Tablet Holder je kompatibilní s mobilními telefony a minitablety o velikosti 10,2–20,3 cm (7,9–10,2 "). Oceníte možnost nastavení úhlu náklonu a také variabilitu vertikálního i horizontálního uchycení. Stolní držák Vention využijete v kanceláři, kuchyni i na pracovním stole. nbsp; ÚHEL NÁKLONU0–100° ROZMĚRY99 × 85 × 28 mm BARVAčerná Držák Vention je snadno přenositelnýVention Smartphone and Tablet Holder můžete nosit všude s sebou. Díky jeho možnosti složení nezabere téměř žádné místo. Zajisté oceníte jeho protiskluzové nožky pro dobrou stabilitu. Velmi praktická je možnost používání přístroje jak v horizontální, tak ve vertikální poloze. nbsp; Náklon dle potřebyVention Smartphone and Tablet Holder disponuje možností...

Objev podobné jako Vention Smartphone and Tablet Holder Black (KCAB0)

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 DB9 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2-DB9KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (key-locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PDU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 DB9 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2-DB9U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PDKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Input Cable Length: ca. 100 cm Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC Power Supply

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet s scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle s vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device s internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11U: Compatible with OEM hand strap Easy insertion and removal With Latch Prepared for RAM NFC Extender RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Certifications: RoHS, WEEE, CE FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot

Držák na mobilní telefon - na stůl, mechanický, možnost nastavení polohy, max. šířka zařízení 30,48 cm Není vyplněn Alternativní text k fotografii! Držák na mobilní telefon Choetech Metal Foldable Mobile and Tablet Holder Mějte svůj telefon vždy na očích. S držákem na mobilní telefon Choetech se již vyhnete jeho hledání po bytě. nbsp;Navíc vždy pohodlně uvidíte třeba na videohovor nebo přehrávaný film. Stojánek Choetech si nastavíte tak, aby vám to vyhovovalo. Ani kvůli nabíjení nemusíte telefon ze stojánku sundávat, Choetech Metal Foldable Mobile and Tablet Holder disponuje otvorem, kterým jednoduše povedete kabel. Vhodný je pro telefon či tablet. Stabilitu držáku na mobilní telefon zajišťují silikonové podložky. Není vyplněn...

Objev podobné jako Choetech Metal Foldable Mobile and Tablet Holder (H064)

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Stolní držák pro tablet i mobil Vention Smartphone and Tablet Holder je kompatibilní s mobilními telefony a minitablety o velikosti 10,2–20,3 cm (7,9–10,2"). Oceníte možnost nastavení úhlu náklonu a také variabilitu vertikálního i horizontálního uchycení. Stolní držák Vention využijete v kanceláři, kuchyni i na pracovním stole. nbsp; ÚHEL NÁKLONU 0–100° ROZMĚRY 99 × 85 × 28 mm BARVA šedá Držák Vention je snadno přenositelný Vention Smartphone and Tablet Holder můžete nosit všude s sebou. Díky jeho možnosti složení nezabere téměř žádné místo. Zajisté oceníte jeho protiskluzové nožky pro dobrou stabilitu. Velmi praktická je možnost používání přístroje jak v horizontální, tak ve vertikální...

Objev podobné jako Vention Smartphone and Tablet Holder Gray (KCAH0)

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Sháníte držák pro telefon na sledování filmů? Vhodným řešením pro vás může být držák na mobilní telefon Orico. K praktickým funkcím patří možnost upravení polohy držáku. Držák na mobilní telefon na stůl oceníte při práci i zábavě. Hlavní přednosti držáku na telefon ORICO Phone / Tablet Holder Black Zásluhou držáku na mobilní telefon Orico bude jeho ovládání snazší K samozřejmostem patří také možnost úpravy polohy telefonu Držák na mobilní telefon Orico je vhodný na stůl

Objev podobné jako ORICO Phone / Tablet Holder Black (ORICO PH2-BK)

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Chtěli byste zakoupit držák na mobilní telefon do kanceláře? Vhodným řešením pro vás může být držák na mobilní telefon Orico. K praktickým funkcím patří možnost upravení polohy držáku. Držák na mobilní telefon na stůl s vámi zůstane při práci i při zábavě. Hlavní vlastnosti držáku na telefon ORICO Phone / Tablet Holder White S pomocí držáku na mobilní telefon Orico bude jeho ovládání praktičtější Výrobce nezapomněl ani na možnost úpravy polohy telefonu Držák na mobilní telefon Orico je nachystaný na stůl

Objev podobné jako ORICO Phone / Tablet Holder White (ORICO PH2-WH)

Držák pro tablet - do auta, mechanický, uchycení na opěrku hlavy, pro tablety o šířce 17,78 - 27,94 cm Prémiový držák tabletu s montáží na opěrku hlavy autosedačkyUniverzální držák tabletu nbsp;Trust Thano snadno připevníte na opěrku hlavy jakékoli autosedačky. Díky kvalitnímu zpracování a možnosti vertikálního i horizontálního použití si sledující mohou snadno nastavit ideální pozorovací úhel. Polstrované čelisti držáku jsou snadno přizpůsobitelné a dokážou bezpečně uchytit tablety s maximální šířkou 19,5 cm (7-11”). Držák Trust Thano nikterak nebrání přístupu k displeji, konektorům a ovládacím prvkům tabletu.Klíčové vlastnosti držáku Trust Thano Tablet Headrest Car HolderUniverzální prémiový držák tabletů nbsp;Trust Thano pro upevnění na opěrku hlavy autosedačkyNastavitelné polstrované čelisti pevně uchytí až 195 mm široké tablety (7-11")Snadná a bezpečná montáž na opěrku sedadlaDržák Trust Thano vám pomůže zabavit děti při cestování autem hrami či...

Objev podobné jako Trust Thano Tablet Headrest Car Holder (23604)

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld s scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PHU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON12PHU Form-Fit Holder for Honeywell CT40, CT45

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld s scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PDHU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON12PDHU Form-Fit Holder for Honeywell CT40, CT45