getac 590gbl000903 ergonomic hand strap

Ergonomic Hand Strap with integrated easel stand, Always-On suitable for 10" tablet, fits for: ZX10

Objev podobné jako Getac 590GBL000903 Ergonomic Hand Strap

Getac snapback, rubber hand strap, kick stand, smart card reader, black, fits for: RX10.

Objev podobné jako Getac GOHSX1 snapback, hand strap

SnapBack, hand strap & kick stand, fits for: RX10

Objev podobné jako Getac GOHKX1 SnapBack, hand strap

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with Keys Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2U: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC & USB-A Connector

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC & USB-A Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac 4-point hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Buchse Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC Power Supply

Hand strap, rubber, fits for: A140

Objev podobné jako Getac GMHSXB hand strap

Hand strap, kick stand, rotating, fits for: A140

Objev podobné jako Getac GMHRX8 hand strap

Hand strap, rotating, kickstand, fits for: F110G6

Objev podobné jako Getac GMHRXJ hand strap

Hand strap, rotating, kickstand, fits for: F110G7

Objev podobné jako Getac GMHRXM hand strap

Hand strap, fits for: T800

Objev podobné jako Getac GMHSX9 hand strap

Hand strap, fits for: SnapBacks

Objev podobné jako Getac GMHSXA hand strap

Hand strap, rotating, incl.: kickstand, fits for: UX10, UX10G2, UX10G2-R, UX10G3

Objev podobné jako Getac GMHRXK hand strap, rotating, kickstand

Hand Strap with Stylus Holder, fits for: ZX70-Ex

Objev podobné jako Getac GMHRX9 hand strap

Hand strap, kick stand, rotating, incl.: stylus holder, fits for: EX80

Objev podobné jako Getac GMHRXA hand strap

4 point shoulder strap, please order separately: hand strap, fits for Getac F110

Objev podobné jako Getac GMS4X1 shoulder strap

Canon E2 Hand Strap - Popruh na dlaň Canon E2 Hand Strap je navržen pro pohodlné a bezpečné držení vaší zrcadlovky. Klíčové vlastnosti Připojuje se k boku zrcadlovky. Horní část se připojuje k poutku na popruh. Spodní část se připojuje do stativového závitu. Bezpečnost a pohodlí Díky tomuto popruhu je držení zrcadlovky jistější a bezpečnější. Umožňuje pohodlné dlouhodobé držení fotoaparátu v ruce. Snadné upevnění Upevnění k fotoaparátu je řešeno poutkem, který se provlékne v úchytu pro popruh a šroubem jdoucím do stativového závitu.

Objev podobné jako Canon E2 hand strap - popruh na dlaň

Kickstand with Rotating Hand Strap, Hand Strap is adjustable and rotatable, compatible with standard and extended battery, fits for: ET60, ET65

Objev podobné jako Zebra XBK-ET6X-KCKSTD-01 Kickstand with Rotating Hand Strap

2-point shoulder strap, order separately: hand strap, fits for: F110G3, F110G5, V110 G4

Objev podobné jako Getac GMS2X4 2-point shoulder strap

Hand strap, left hand, pack of 10, order separately: mount, fits for: 8680i.

Objev podobné jako Honeywell 8680i505LHSGH hand strap (L), pack of 10

Hand strap, right hand, pack of 10, order separately: mount, fits for: 8680i.

Objev podobné jako Honeywell 8680i505RHSGH hand strap (R), pack of 10

Honeywell CT37 – Hand Strap, Black (3-pack) Sada tří černých poutkových popruhů pro zařízení Honeywell CT37. Zajišťují pohodlné a bezpečné držení zařízení během používání v běžném provozním prostředí. *Kompatibilita: Honeywell CT37 *Provedení: standardní (černá barva) *Typ: poutko na ruku *Balení: 3 kusy

Objev podobné jako CT37 - hand strap, black

Hand strap, pack of 5, fits for: Memor 10.

Objev podobné jako Datalogic 94ACC0200 hand strap, pack of 5

Hand strap, healthcare, pack of 5, fits for: Memor 10.

Objev podobné jako Datalogic 94ACC0203 hand strap, healthcare, pack of 5

Hand Strap, fits for: QLn series, ZQ600.

Objev podobné jako Zebra P1031365-027 Hand Strap

Hand Strap, Left, pack of 10, size: large, fits for: 8765i

Objev podobné jako Honeywell 8675I505LHGL, Hand Strap

Hand strap, pack of 5, fits for: CN80 (Extended range)

Objev podobné jako Honeywell CN80-HS-5PK hand strap , pack of 5

Hand strap, pack of 5, fits for: CN80 (Standard range)

Objev podobné jako Honeywell CN80-HSNF-5PK hand strap , pack of 5

Hand strap, fits for: EDA51K.

Objev podobné jako Honeywell EDA51K-HS-1PK, hand strap

Hand strap, fits for: EDA51

Objev podobné jako Honeywell 50141384-001, hand strap

Hand strap, pack of 3, fits for: EDA61K.

Objev podobné jako Honeywell EDA61K-HS-3PK hand strap, pack of 3

Hand strap, pack of 3, fits for: pistol grip.

Objev podobné jako Honeywell EDA61K-SHS-3PK hand strap, pack of 3

Hand strap, 3 in 1, fits for: EDA70

Objev podobné jako Honeywell 50137174-001, hand strap

Honeywell hand strap, pack of 5, fits for: CK65.

Objev podobné jako Honeywell 8754-870650-01 hand strap, pack of 5

Honeywell hand strap, pack of 5, fits for: CN7X, CN7Xe

Objev podobné jako Honeywell 203-930-001, hand strap

Hand strap, pack of 3, fits for: CT50, CT60

Objev podobné jako Honeywell 213-049-001 hand strap, pack of 3

Hand strap, order separately: protective boot, fits for: EC50, EC55.

Objev podobné jako Zebra SG-EC5X-HSTRP1-01 hand strap

Hand strap, fits for: PS20.

Objev podobné jako Zebra 50-12500-066 hand strap

Hand strap, fits for: MC22.

Objev podobné jako Zebra SG-MC2X-HSTRP-01 hand strap

Hand strap, fits for: MC3100 Gun.

Objev podobné jako Zebra SG-MC3123242-01R Hand strap

Hand strap, fits for: MC3X (brick version).

Objev podobné jako Zebra SG-MC3123244-01R hand strap

Hand strap, fits for: MC3300 (gun).

Objev podobné jako Zebra SG-MC33-HDSTPG-01 hand strap

Hand strap, fits for: MC3300, MC3300 (rotating head).

Objev podobné jako Zebra SG-MC33-HDSTPB-01 hand strap

Hand strap, pack of 3, fits for: MC90XX (pistol grip).

Objev podobné jako Zebra KT-66447-03R hand strap, pack of 3

Hand strap, fits for: MC9300.

Objev podobné jako Zebra SG-MC93-HDSTPG-01 hand strap

Hand strap, fits for: TC21, TC26.

Objev podobné jako Zebra SG-TC2Y-HSTRP1-01 hand strap TC21, TC26

Hand strap, healthcare, fits for: TC21-HC, TC26-HC.

Objev podobné jako Zebra SG-TC2W-HSTRP1-01 hand strap, healthcare