getac 590gbl000052 clam

Dual Clam Shell with Large Plate fits for: F110

Objev podobné jako Getac 590GBL000052 clam

NOVA LUCE stropní svítidlo CLAM – kouřové chromové sklo & bílý kovStropní svítidlo NOVA LUCE CLAM zaujme na první pohled svým originálním designem, který spojuje eleganci kouřového chromovaného skla s čistotou bílého kovu. Jeho precizně propracovaný povrch vytváří na stropě jedinečné světelné efekty, které dodají každému interiéru nádech luxusu i jemné extravagance.Design & inspiraceSvítidlo CLAM je ideální volbou pro moderní interiéry, které hledají spojení funkčnosti a stylu. Díky svému rozměru (průměr 300 mm, výška 120 mm) skvěle vynikne v obývacím pokoji, ložnici i v předsíni. Kouřové sklo v kombinaci s bílým kovem působí elegantně a zároveň nenarušuje čistotu prostoru.Technické parametry Napětí: 220–240 V Příkon světelného zdroje: 2 × 12 W E27 (max. 24 W) Stupeň krytí: IP44 – vhodné do koupelen a vlhkých prostor Materiál: kouřové chromované sklo, bílý kov Rozměry: průměr 300 mm, výška 120 mm Patice: E27 (žárovky nejsou součástí balení) Kolekce: CLAMProč si vybrat CLAM? Efektní rozptyl světla díky speciální struktuře skleněného stínidla Bezpečný provoz i ve vlhkých prostorách – IP44 Variabilita díky dvěma paticím E27 – možnost volby teploty i intenzity světla Snadná údržba a dlouhá životnostDoporučení architektaDoporučujeme zvolit LED žárovky s teplotou chromatičnosti 2700–3000K pro příjemné teplé osvětlení, které podtrhne charakter kouřového skla. Svítidlo CLAM je vhodné i pro energeticky úsporný provoz – doporučujeme kvalitní LED žárovky pro maximální efektivitu a životnost.Trust badges & garance Životnost: až 30 000 hodin (v závislosti na zvolených LED žárovkách) Záruka: 2 roky Certifikace: CE, RoHSFAQ – Často kladené dotazy Lze svítidlo použít do koupelny? Ano, díky stupni krytí IP44 je CLAM vhodný i do vlhkých prostor. Jaký typ žárovky doporučujete? Nejvhodnější jsou LED žárovky s paticí E27 a výkonem do 12 W. Pro útulnou atmosféru volte teplé bílé světlo (2700–3000K).

Objev podobné jako NOVA LUCE stropní svítidlo CLAM kouřové chromové sklo bílý kov E27 2x12W 230V IP44 bez žárovky 9738254

Stropní svítidlo NOVA LUCE CLAM – Elegantní kombinace čirého skla a bílého kovuStropní svítidlo NOVA LUCE CLAM představuje moderní a nadčasové řešení pro osvětlení koupelny, chodby či jiných interiérů vyžadujících zvýšenou ochranu proti vlhkosti. Precizně tvarované čiré sklo v kombinaci s decentním bílým kovem tvoří harmonický celek, který přináší jemný rozptyl světla a zároveň zůstává stylovou dominantou prostoru.Klíčové vlastnosti svítidla CLAM Rozměry: Výška 120 mm, průměr 300 mm Materiál: kvalitní čiré sklo, bílý kov Patice: 2x E27 (max. 2x 12W, celkový příkon 24W) Napětí: 220–240 V Stupeň krytí: IP44 – ideální pro koupelny a prostory se zvýšenou vlhkostí Bez žárovek: Možnost volby úsporných LED žárovek dle vlastních preferencí Kolekce: CLAMDesign, který přináší světlo i stylDíky reliéfnímu povrchu skla vytváří svítidlo atraktivní světelný efekt na stropě, čímž opticky zvětšuje a zútulňuje interiér. Kombinace jednoduchosti a luxusu z něho činí univerzální volbu pro moderní i klasicky pojaté prostory.Doporučení pro použití a výběr žárovkySvítidlo je osazeno dvojicí patic E27, což umožňuje použít jak klasické, tak i moderní LED žárovky. Pro maximální úsporu doporučujeme LED žárovky s dlouhou životností a nízkou spotřebou.Trust badges & garance Životnost LED žárovek: až 30 000 h (dle zvoleného světelného zdroje) Záruka: 2 roky Certifikace: CE, RoHSFAQ – Často kladené dotazy Lze použít stmívatelné žárovky? Ano, pokud zvolíte stmívatelné žárovky E27 a vhodný stmívač, lze regulovat intenzitu osvětlení. Pro jaké prostory je svítidlo vhodné? Díky krytí IP44 je svítidlo ideální do koupelen, chodeb, vstupních hal nebo kuchyní.Dodejte svému interiéru jedinečný charakter s elegantním stropním svítidlem NOVA LUCE CLAM a užijte si dokonalé světlo i design.

Objev podobné jako NOVA LUCE stropní svítidlo CLAM čiré sklo bílý kov E27 2x12W 230V IP44 bez žárovky 9738255

Natec sleeve pro NB CLAM 15.6\" - eleganční ochrana pro váš notebook Natec CLAM je kvalitní a elegantní pouzdro pro váš notebook, ideální pro cestování. Design a odolnost Stylový a odolný design, k dispozici ve velikosti 15.6\". Praktický a profesionální Kompaktní velikost umožňuje snadné uložení do tašky nebo kufru. Úchyty pro pohodlné nošení Speciální šití umožňuje vytvoření úchytů pro pohodlné nošení v ruce. Ochrana proti odřením a pádům Ochranné polstrování chrání váš notebook před odřením a pádem. Hladké a měkké vnitřní polstrování Polstrování chrání vaše zařízení před škrábanci a nárazy. Odolný vůči nepříznivým povětrnostním podmínkám Vnější vrstva je vyrobena ze silného nárazuvzdorného materiálu. Prostor pro vaše potřeby Hlavní přihrádka zajišťuje ochranu proti dešti, nárazům nebo poškrábání. Extra kapsa pro drobnosti Přídavná kapsa na zip slouží pro uložení drobností nebo napájecího zdroje. Specifikace Typ: Sleeve Specializace: Notebooky Vyhrazená velikost: 15,6\" Oddíly: 1, pro notebook Kapsy: 1, pro příslušenství Počet vnějších kapes: 1 Materiál: Polyester Barva: Černá Délka: 410 mm Šířka: 20 mm Výška: 285 mm Hmotnost: 255 g

Objev podobné jako Natec sleeve pro NB CLAM 15.6" černá

LENOVO NTB ThinkPad L13 Clam G5 - Ultra5 125U Moderní notebook pro náročné uživatele. Výkon a technické parametry Procesor Intel Core™ Ultra 5 125U poskytuje vysoký výkon. S integrovanou grafickou kartou Intel Graphics. 16GB paměti LPDDR5-6400 pro rychlé a plynulé fungování. Úložiště 512GB SSD M.2 2242 pro rychlé načítání dat. Design a konstrukce Displej 13.3" WUXGA IPS proti odleskům. Podsvícená klávesnice pro pohodlné psaní. Černá barva a hliníkový kryt pro elegantní vzhled. Hmotnost od 1.23 kg pro snadnou přenositelnost. Software a konektivita Operační systém Windows 11 Pro 64 CZ/SK/EN. Bezdrátové připojení Intel Wi-Fi 6E AX211, 11ax 2x2 + BT5.3. Široká nabídka portů pro připojení periferií. Zabezpečení a soukromí Čtečka otisků prstů integrovaná v tlačítku pro zapnutí. IR kamera pro Windows Hello pro snadné přihlášení. Krytka kamery pro ochranu soukromí. Servis a certifikace Základní záruka 1 rok v servise, možnost upgrade na 3 roky Onsite. Certifikace EPEAT Gold, ENERGY STAR 8.0 a další. Splněno náročné MIL-STD-810H vojenské testy.

Objev podobné jako LENOVO NTB ThinkPad L13 Clam G5 - Ultra5 125U, 13.3" WUXGA, 16GB, 512SSD, FHD+IRcam, W11P

Výška: 120 mm, Průměr: 300 mm, Ochrana IP: IP44, Příkon sv. zdroje: 12W, Celkový příkon: 24W, Napětí: 220-240V, Patice: E27, Vč. světelného zdroje: ne, Materiál: sklo, Barva: bílá, Kolekce: CLAM, Počet světelných zdrojů: 2

Objev podobné jako NOVA LUCE stropní svítidlo CLAM bílé sklo bílý kov E27 2x12W 230V IP44 bez žárovky 9738256

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4PDU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4PU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4U:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4U Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDKLU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalLockable with keyAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE4PDKLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE4PDKLU Form-Fit Holder (Key-Locking) for Getac ZX10

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with Keys Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2KLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PD2U: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PD2U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC & USB-A Connector

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX80 rugged tablet. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PDU: Compatible with the Getac tablet accessoires Not compatible with the Getac hand strap accessory Easy insertion and removal With Latch Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Connector Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Output Cable Length: ca. 24 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PDU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Getac ZX80 Rugged Tablet - 5.5mm DC & USB-A Connector

This RAM Mounts Form-Fit (Key-Locking) holder is suitable for the Getac ZX80 rugged tablet. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. Tablet accessories such as the optional battery or the Getac 2-point hand strap can also be used. The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX80. An NFC repeater add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-GE5PKLU: Compatible with the Getac tablet accessoires Not compatible with the Getac 4-point hand strap accessory Easy insertion and removal Lockable with key Additional mounting plate for attaching additional devices or accessories Prepared for RAM Vent-Temp, Temp Right or NFC repeater Input Connector: 5.5mm DC-Buchse Input Voltage: 19V Output Voltage: 14V Input Cable Length: ca. 100 cm Certifications: FCC, IC, CE, UKCA, WEEE & RoHS Additional information: This holder is compatible with the Getac 2-point hand strap, but will not support the 4-point hand strap. Devices shown are not included in the delivery. Only the RAM-HOL-GE5PKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Getac ZX80 Rugged Tablet - 5.5mm DC Power Supply

This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM Vent-Temp can utilize the vehicle's air vents to direct hot or cold air to the Getac ZX70.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3FU:Compatible with the Getac tablet accessoiresEasy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-TempAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-GE3FU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE3FU Form-Fit Holder for Getac ZX70

This RAM Mounts Form-Fit holder is suitable for the Getac ZX70 rugged tablet.The cut-outs on the buttons and ports allow you to continue using them without any problems.The RAM NFC Extender can be used to expand the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-GE3NU:Easy insertion and removalStylus-Pen holderAdditional mounting plate for attaching additional devices or accessoriesPrepared for the RAM NFC ExtenderAdditional information: This holder version will not support the Getac Rotating Hand Strap & Kickstand accessory.Devices shown are not included in the delivery.Only the RAM-HOL-GE3NU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-GE3NU Form-Fit Holder for Getac ZX70

Getac Lind vehicle power supply, 12-16 VDC, cigarette lighter

Objev podobné jako Getac 54138307G001 Lind vehicle power supply, 12-16 VDC

Getac Lind vehicle power supply, 12-32 VDC, cigarette lighter

Objev podobné jako Getac 4421270G0008 Lind vehicle power supply, 12-32 VDC

Removable media bay battery, for Getac B300

Objev podobné jako Getac GBS9X1 media bay battery

Getac battery charging station, 2 slots, inkl.: power supply, power cord (UK), fits for: B360

Objev podobné jako Getac GCMCKH battery charging station, 2 slots, UK

Getac battery charging station, 2 slots, inkl.: power supply, power cord, fits for: B360

Objev podobné jako Getac GCMCEH battery charging station, 2 slots

Getac battery charging station, 8 slots, inkl.: power supply, power cord, fits for: B360

Objev podobné jako Getac GCECEL battery charging station, 8 slots

Getac battery charging station, 8 slots, inkl.: power supply, power cord (UK), fits for: B360

Objev podobné jako Getac GCECKL battery charging station, 8 slots, UK

Getac keyboard, Layout: german, bluetooth

Objev podobné jako Getac 592GUK000129 keyboard, GER, bluetooth

Getac Driving Safety Utility, Hardware-Locked Perpetual License, with 3 Years Maintenance (Per Device)Available on Windows 10 Pro, Windows 11 Pro, Android 9, 10, 11, and 12 devices. (Android 9,10 for ZX70G2; Android 11,12 for ZX10)

Objev podobné jako Getac OSGDX1XXCXXX Driving Safety Utility

Dual bay main battery charger, incl. power supply (EU), fits for: Getac F110

Objev podobné jako Getac GCMCE7 charger, EU

Getac keyboard, detachable, Protection class: IP66, layout: german, fits for: F110

Objev podobné jako Getac GDKBBL keyboard, DE

Getac keyboard, detachable, Protection class: IP66, layout: US, fits for: F110

Objev podobné jako Getac GDKBUL keyboard, US

Getac keyboard, detachable, Protection class: IP66, layout: french, fits for: F110

Objev podobné jako Getac GDKBDL keyboard, FR

Getac keyboard, detachable, Protection class: IP66, layout: UK, fits for: F110

Objev podobné jako Getac GDKBCL keyboard, UK

4 point shoulder strap, please order separately: hand strap, fits for Getac F110

Objev podobné jako Getac GMS4X1 shoulder strap

Getac battery charging station, 8 slots, incl.: power supply, power cord (EU), fits for: K120

Objev podobné jako Getac GCECEA battery charging station, 8 slots, EU

Getac battery charging station, 8 slots, incl.: power supply, power cord (UK), fits for: K120

Objev podobné jako Getac GCECKA battery charging station, 8 slots, UK

Getac battery charging station, 2 slots, incl.: power supply, power cord (UK), fits for: K120

Objev podobné jako Getac GCMCKF battery charging station, 2 slots, UK

Battery charging station, 2 slots: 2x Main Battery, incl.: power supply (EU), for Getac S410G4, X600

Objev podobné jako Getac GCMCEJ battery charging station (EU)

Getac Brodit vehicle holder, fits for: T800

Objev podobné jako Getac 543312210013 Brodit vehicle holder

Getac battery charging station, 8 slots, incl.: power supply, power cord (UK), fits for: T800

Objev podobné jako Getac GCECKB battery charging station, 8 slots, UK

Wrist strap, for Getac T800

Objev podobné jako Getac GMRSX1 Wrist strap

Getac battery charging station, 8 slots, incl.: power supply, power cord (UK), fits for: UX10

Objev podobné jako Getac GCECKK battery charging station, 8 slots, UK

Getac battery charging station, 8 slots, incl.: power supply, power cord (EU), fits for: UX10

Objev podobné jako Getac GCECEK battery charging station, 8 slots, EU

Getac battery charging station, 2 slots, incl.: power supply, power cord (UK), fits for: UX10

Objev podobné jako Getac GCMCKG battery charging station, 2 slots, UK

Getac Media Bay Battery, 11.1V, typical 4200mAh (1-pack) fits for: X600Pro

Objev podobné jako Getac GBS6X2 Media Bay Battery

Getac snapback with handstrap, kickstand and smart card reader, blue, fits for: RX10 HC

Objev podobné jako Getac GOHSX2 snapback HC

Getac snapback, rubber hand strap, kick stand, smart card reader, black, fits for: RX10.

Objev podobné jako Getac GOHSX1 snapback, hand strap