anker powerwave mag go 2 in 1 dock white b2568321

Nabíjecí stojánek - celkový výkon 7,5 W, vstup USB-C, indikace nabíjení, základna pro hodinky, součástí balení 1,5m kabel se zakončením USB-C Nabíjecí stojánek Anker PowerWave Mag-Go 2-in-1 Dock pro iPhone a AirPodsMáte doma hned několik Apple zařízení a stále nemůžete najít ucelený způsob jejich nabíjení? Přesně pro tyto případy máme nachystaný multifunkční nabíjecí stojánek Anker PowerWave Mag-Go 2-in-1 Dock. Hravě bezdrátově nabije moderní iPhone s technologií MagSafe i sluchátka AirPods s Qi pouzdrem.Nabíjecí stojánek s malými rozměryMáte málo místa nebo často cestujete? V tom případě oceníte, že Anker PowerWave Mag-Go 2-in-1 Dock je o 40 % menší než klasická 0,33 l plechovka. Díky tomu se snadno vejde na každý stůl nebo do cestovní tašky.Stojánek Anker PowerWave Mag-Go 2-in-1 Dock je designován pro nové iPhonyPokud máte iPhone 13 a novější, tak jistě víte, že podporuje technologii MagSafe. Díky integrovaným magnetům je totiž používání...

Objev podobné jako Anker PowerWave Mag-Go 2-in-1 Dock White (B2568321)

Nabíjecí stojánek - celkový výkon 7,5 W, vstup USB-C, základna pro hodinky, součástí balení 1,5m kabel se zakončením USB-C Nabíjecí stojánek Anker PowerWave Mag-Go 2-in-1 Stand 5K pro iPhone a AirPodsMáte doma hned několik Apple zařízení a stále nemůžete najít ucelený způsob jejich nabíjení? Přesně pro tyto případy máme nachystaný multifunkční nabíjecí stojánek Anker PowerWave Mag-Go 2-in-1 Stand 5K. Hravě bezdrátově nabije moderní iPhone s technologií MagSafe, sluchátka AirPods s Qi pouzdrem a navíc ještě obsahuje 5 000mAh powerbanku s magnetickým přichycením na váš iPhone.Nabíjecí stojánek a powerbanka dohromadySpousta uživatelů používá takové aplikace, například hry, které zlikvidují baterii v iPhone za pár hodin. Majitel nabíjecího stojánku Anker PowerWave Mag-Go 2-in-1 Stand 5K však může i v tomto případě zůstat zcela v klidu. Součástí stojánku je i powerbanka s kapacitou 5000 mAh, která drží na stojánku a následně na iPhone pomocí magnetů.Extra...

Objev podobné jako Anker PowerWave Mag-Go 2-in-1 Stand 5K White (B25A7321)

MagSafe bezdrátová nabíječka - vstup USB-C, s indikací nabíjení, 1,5m kabel součástí Zbavte se všech kabelů a nabíjejte svá Apple zařízení bezdrátovou MagSafe nabíječkou Anker. Chtěli byste najít pohodlnější způsob nabíjení svého iPhonu v autě? Pořiďte si MagSafe bezdrátovou nabíječku do auta Anker. Bezdrátové nabíjení s nabíječkou MagSafe je hračka. Svůj iPhone připojíte pomocí silných magnetů. Stačí, když přiblížíte telefon k magnetickému bodu nabíječky, a ta se již sama postará o dokonalé srovnání polohy pro bezchybné nabíjení. Magnetické zarovnání funguje jenom s modely iPhone 14, iPhone 14 Pro, iPhone 13, iPhone 13 Pro, iPhone 12 a iPhone 12 Pro. Převažuje na ní černá barva, která dotváří celkový dojem. Hlavní vlastnosti MagSafe bezdrátové nabíječky Anker PowerWave Mag Go Car Charging Mount, Black Nabití chytrých Apple zařízení bez překážejících kabelů obstará MagSafe bezdrátová nabíječka Anker Pohodlné nabíjení Apple zařízení v autě zajistí MagSafe...

Objev podobné jako Anker PowerWave Mag Go Car Charging Mount, Black (B2930G11)

knihovna Lime White Marbel and White
vertikální podpěra pro truhlík Magnus 80 cm
zelená zeď Green Wall Magnus
příslušenství k truhlíku Magnus
zahradní nábytek Magnus set 4 ks
nábytek Magnus pro balkon a zahradu
Wenko Magna černá
vertikální podpěra pro truhlík Magnus 100 cm
zelená zeď Magnus pro velkoobjemové truhlíky
příslušenství k truhlíku Magnus vertikální systém
velkoobjemový truhlík Magnus 100 cm terakota
truhlík Magnus pro zeleninu a okrasné rostliny
truhlík Magnus s možností koleček
zelená stěna z truhlíku Magnus
truhlík Magnus pro vertikální zahradničení
T-spojka pro MAG LOW kolejnicový systém

Powerbanka pro mobilní telefony a tablety, 5000 mAh, QI bezdrátové nabíjení 7,5Waž 5 V a 2,4 A, LED indikace stavu, nízká hmotnost Potřebujete záložní baterii pro své zařízení? Powerbanka Anker s kapacitou 5000 mAh perfektně poslouží k nabíjení mobilu, foťáku i dalších zařízení, když nemáte možnost nabít přístroj ze zásuvky. Je dodávána s kabelem USB-C. Pro zařízení vybavená touto funkcí můžete využívat výhody bezdrátového napájení s maximálním výkonem 7,5 W. Rozměry powerbanky jsou 66 × 105 × 12,8 mm. Klíčové vlastnosti powerbanky Anker PowerCore Mag-Go 5K White Powerbanka Anker slouží pro dobíjení telefonů a tabletů Powerbanka s kapacitou 5000 mAh Informace o aktuálním stavu pomocí diod Dodávána s kabelem USB-C Mezi jejími přednostmi nalezneme i bezdrátové nabíjení Výstupní proud činí 2,4 A Celková hmotnost powerbanky Anker činí 100 g Funkce a příslušenství powerbanky Anker PowerCore Mag-Go 5K White Velkou výdrž baterie oceníte zejména na výletech,...

Objev podobné jako Anker PowerCore Mag-Go 5K White (A1611G21)

Powerbanka Potřebujete spolehlivou powerbanku? Powerbanka Anker poslouží mimo jiné Funkce a příslušenství powerbanky Anker PowerCore Mag-Go 5K Black Velkokapacitní powerbanku využijete zejména na delších cestách, výletech, na dovolené a kdekoliv jinde, kde není k dispozici zásuvka.

Objev podobné jako Anker PowerCore Mag-Go 5K Black (A1611G11)

MagSafe držák na mobilní telefon - na prst, mechanický Magnetický držák pro iPhone Anker Mag Go Ring s MagSafeJe jasné, že iPhone je poměrně drahý telefon, kterému nesvědčí pády na zem. Ostatně jako kterémukoli jinému chytrému telefonu. Aby vám iPhone omylem nevyklouzl na zem, tak si pořiďte Anker Mag Go Ring. Jde šikovně navržený magnetický držák s poutkem na prst. V podstatě jde o prstýnek s přidaným magnetickým kroužkem, který díky technologii MagSafe pevně drží kompatibilní iPhone.S čím je kompatibilní Anker Mag Go Ring?Zajímavý držák Anker Mag Go Ring je kompatibilní s iPhonem 12 a novějším. Využívá totiž technologie MagSafe, která pomocí magnetů pevně drží iPhone a kompatibilní nabíječku nebo stojánek u sebe. Mimochodem, Anker Mag Go Ring udrží až 800 gramů, což násobně překonává hmotnost chytrého telefonu iPhone. A jak je to s pouzdry? Anker Mag Go Ring není možné používat s nemagnetickými pouzdry na telefony, jako jsou pouzdra OtterBox...

Objev podobné jako Anker Mag Go Ring Holder, White (A25A0G21)

MagSafe držák na mobilní telefon - na prst, magnetický Magnetický držák pro iPhone Anker Mag Go Ring s MagSafeJe jasné, že iPhone je poměrně drahý telefon, kterému nesvědčí pády na zem. Ostatně jako kterémukoli jinému chytrému telefonu. Aby vám iPhone omylem nevyklouzl na zem, tak si pořiďte Anker Mag Go Ring. Jde šikovně navržený magnetický držák s poutkem na prst. V podstatě jde o prstýnek s přidaným magnetickým kroužkem, který díky technologii MagSafe pevně drží kompatibilní iPhone.S čím je kompatibilní Anker Mag Go Ring?Zajímavý držák Anker Mag Go Ring je kompatibilní s iPhonem 12 a novějším. Využívá totiž technologie MagSafe, která pomocí magnetů pevně drží iPhone a kompatibilní nabíječku nebo stojánek u sebe. Mimochodem, Anker Mag Go Ring udrží až 800 gramů, což násobně překonává hmotnost chytrého telefonu iPhone. A jak je to s pouzdry? Anker Mag Go Ring není možné používat s nemagnetickými pouzdry na telefony, jako jsou pouzdra OtterBox...

Objev podobné jako Anker Mag Go Ring Holder, Blue (A25A0G31)

Nabíječka do sítě - s podporou rychlého nabíjení, celkový výkon 20 W, výstup USB-C, technologie rychlého nabíjení USB Power Delivery Nabíječka Anker PowerPort III Nano poskytne vašemu zařízení energii až třikrát rychleji než klasické nabíječky. Vysoká rychlost napájení je zaručena podporou technologie 20W Power Delivery a Anker PowerIQ 3.0 spolu s USB-C portem pro rychlonabíjení. Díky kompaktním rozměrům a nízké hmotnosti lze nabíječku Anker PowerPort III Nano bez problému vzít kamkoliv s sebou. Při používání nabíječky oceníte vysokou kvalitu zpracování a praktické bezpečnostní prvky, které zajistí dlouhou životnost a maximální spolehlivost. Široká kompatibilita umožňuje použití nabíječky Anker PowerPort III Nano s mobilními telefony, tablety, kamerami, sluchátky i dalšími zařízeními. Klíčové vlastnosti nabíječky Anker PowerPort III NanoUSB-C výstup s podporou rychlonabíjeníVysoká kvalita zpracování nabíječky Anker PowerPort III NanoNízká...

Objev podobné jako Anker PowerPort III Nano 20W USB-C EU White (A2633G22 )

NakupteReproduktor Bluetooth SOUNDCORE Anker Select 4 Go Purplez kategorieAudio, video, SAT > Přenosné reproduktory, rádia, přehrávače a diktafony > Přenosné bluetooth reproduktoryza752.00Kč

Objev podobné jako Reproduktor Bluetooth SOUNDCORE Anker Select 4 Go Purple

NakupteReproduktor Bluetooth SOUNDCORE Anker Select 4 Go Redz kategorieAudio, video, SAT > Přenosné reproduktory, rádia, přehrávače a diktafony > Přenosné bluetooth reproduktoryza752.00Kč

Objev podobné jako Reproduktor Bluetooth SOUNDCORE Anker Select 4 Go Red

The GDS® Uni-Conn™ Powered Snap-In Wall Dock with PoE (RAM-GDS-DOCK-W5-U3-POEU) is a versatile snap-in wall docking solution for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via the JST connector and PoE Adapter. This dock installs directly over a standard rectangular electrical outlet box. The snap-in attachment method makes this wall dock ideal for high-traffic environments. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Snap-in dock featuring GDS® Technology™ uses an integrated pogo pin connector to provide high-speed charging Designed for devices enclosed in the IntelliSkin® Thin-Case™ with Rear Pogo Pads JST connector enables high-speed charging capabilities Installs directly over standard outlet boxes Hole pattern - 2-Hole 3.281" (Standard Electrical Box) Material(s) - High strength composite Output voltage - USB PD 3.0: 5V @ 3A, 9V @ 2.2A, 12V @ 1.67A Power output - 20 W max Input connector - JST Connector Input cable length - 800 mm

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Wall Dock with PoE - Rear Pogo Pads - JST Connector

The GDS® Uni-Conn™ Powered Snap-In Kiosk Dock with USB-C (RAM-GDS-DOCK-D10K-U3-C) is a free-standing, powered dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads. Securely dock and undock your device with the assistance of the mechanical attachment mechanism. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via USB-C connection. This dock features a weighted base and rubber pads that provide theft deterrence and prevent it from sliding around on surfaces. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Free-standing, powered Kiosk dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads GDS® connector and pogo pins provide charging via USB-C Weighted base with rubber pads prevents kiosk from moving Mechanic attachment mechanism allows for secure docking and undocking Product dimensions - Overall Width 5.1", Overall Height 6.71", Overall Depth 6.6" Material(s) - High strength composite Output voltage - 5V-20V @ 3A max Power output - 60W max Input connector - USB Type-C female Input cable length - 480 mm

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Kiosk Dock - Rear Pogo-Pins, USB-C

The GDS® Uni-Conn™ Powered Snap-In Kiosk Dock with USB-C - Gray (RAM-GDS-DOCK-D10K-U3-C-GRY) is a free-standing, powered dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads. Securely dock and undock your device with the assistance of the mechanical attachment mechanism. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via USB-C connection. This dock features a weighted base and rubber pads that offer theft deterrence and prevent it from sliding around on surfaces. The light gray aesthetic is ideal for sophisticated, bright workplaces. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Light gray, free-standing, powered Kiosk dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads GDS® connector and pogo pins provide charging via USB-C Weighted base with rubber pads prevents kiosk from moving Mechanical attachment mechanism allows for secure docking and undocking Product dimensions - Overall Width 5.1", Overall Height 6.71", Overall Depth 6.6" Material(s) - High strength composite Output voltage - 5V-20V @ 3A max Power output - 60W max Input connector - USB Type-C female Input cable length - 480 mm

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Kiosk Dock - Rear Pogo-Pins - USB-C Connector - Light Gray

The GDS® Uni-Conn™ Powered Snap-In Kiosk Dock with PoE (RAM-GDS-DOCK-D10K-U3-POE) is a free-standing, powered dock with ethernet capabilities for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads. Securely dock and undock your device with the assistance of the mechanical attachment mechanism. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via RJ45 (ethernet) connection. The PoE connection also allows businesses to push updates securely during downtime. This dock features a weighted base and rubber pads that provide theft deterrence and prevent it from sliding around on surfaces. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Free-standing, powered Kiosk dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads PoE (Power over Ethernet) provides charging capabilities and allows for secure software updates during downtime Weighted base with rubber pads prevents kiosk from moving Mechanic attachment mechanism allows for secure docking and undocking Product dimensions - Overall Width 5.1", Overall Height 6.71", Overall Depth 6.6" Material(s) - High strength composite Output voltage - 5V @ 3A max, 9V @ 2A max, 12V @ 2A max, 15V @ 1.5A max, 3.3-11.3V @ 2A max Power output - 24W max Input connector - ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Kiosk Dock - Rear Pogo-Pins - RJ45 Connection - PoE (Power over Ethernet)

The GDS® Uni-Conn™ Powered Snap-In Kiosk Dock with PoE - Gray (RAM-GDS-DOCK-D10K-U3-POE-GRY) is a free-standing, powered dock with ethernet capabilities for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads. Securely dock and undock your device with the assistance of the mechanical attachment mechanism. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via RJ45 (ethernet) connection. The PoE connection also allows businesses to push updates securely during downtime. This dock features a weighted base and rubber pads that provide theft deterrence and prevent it from sliding around on surfaces. The light gray aesthetic is ideal for sophisticated, bright workplaces. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Light gray, free-standing, powered Kiosk dock for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads PoE (Power over Ethernet) provides charging capabilities and allows for secure software updates during downtime Weighted base with rubber pads prevents kiosk from moving Mechanic attachment mechanism allows for secure docking and undocking Product dimensions - Overall Width 5.1", Overall Height 6.71", Overall Depth 6.6" Material(s) - High strength composite Output voltage - 5V @ 3A max, 9V @ 2A max, 12V @ 2A max, 15V @ ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Snap-In Kiosk Dock - Rear Pogo-Pins - RJ45 Connection - PoE (Power over Ethernet) - Light Gray

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9 & A7 Lite (8.7") - in IntelliSkin Next Gen Protective Sleeve - Multi-Mode - USB-C & USB-A

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Multi-Mode - USB-C & USB-A Co

The GDS® Uni-Conn™ Powered Locking Snap-In Wall Dock with PoE (RAM-GDS-DOCKL-W5-U3-POEU) is a versatile snap-in wall docking solution for devices enclosed in an IntelliSkin® Thin-Case™ with Rear Pogo Pads and features a key lock for additional theft deterrence. Power is provided to the pogo pins integrated into the GDS® Uni-Conn™ adapter via the JST connector and PoE Adapter. This dock installs directly over a standard rectangular electrical outlet box. The snap-in attachment method makes this wall dock ideal for high-traffic environments. One Dock to Connect Them All™ Always Protected. Always Connected.® Features Snap-in dock featuring GDS® Technology™ uses an integrated pogo pin connector to provide high-speed charging; right side key lock provides additional theft deterrence Designed for devices enclosed in the IntelliSkin® Thin-Case™ with Rear Pogo Pads JST connector enables high-speed charging capabilities Installs directly over standard outlet boxes Hole pattern - 2-Hole 3.281" (Standard Electrical Box) Material(s) - High strength composite Output voltage - USB PD 3.0: 5V @ 3A, 9V @ 2.2A, 12V @ 1.67A Power output - 20 W max Input connector - JST Connector Input cable length - 800 mm

Objev podobné jako RAM Mounts GDS Uni-Conn Powered Locking Snap-In Wall Dock with PoE - Rear Pogo Pads - JST Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM76CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+- in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Case - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Dual USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CP-NFCU: Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C 3.1 Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM76CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM76CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ 12.4" (SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM78CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connecto

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

LED2 6093501 MAG IN CORNER-H, W DALI je rohový spojovací modul pro magnetický kolejnicový systém MAG TRACK. Umožňuje vytvářet pravoúhlá napojení kolejnic pro osvětlení v rozích prostor. Modul je stmívatelný přes DALI systém, má napájení 48V DC a je určen výhradně pro vnitřní použití.

• Magnetický systém pro rychlou a snadnou montáž bez nástrojů
• Plně stmívatelný přes DALI systém pro inteligentní řízení osvětlení
• Kvalitní hliníková konstrukce zajišťující dlouhou životnost a odolnost
• Univerzální bílá barva pro elegantní integraci do moderních interiérů

Objev podobné jako LED2 6093501 MAG IN CORNER-H, W DALI bílá

4-Slot Wireless Charging Dock, color: white, Healthcare, fits for: Memor 17-HC

Objev podobné jako Datalogic 4-Slot Wireless Charging Dock, White, HC

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CU: Compatible with GDS hand-stand & more Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Transfer Speed: 5Gbps Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Power Supply

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connect

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector