acer vero obp 15 6 protective sleeve retail pack

Acer Vero OBP 15.6\" Protective Sleeve, Retail Pack Typ: Pouzdro na notebook Pro notebooky: Do 15.6\" Vybavení: Přední kapsa, zip Fyzické vlastnosti Materiál: Z recyklovaných PET lahví 50% polyesteru rPET Ekvivalent 4,9 ks 500ml recyklovaných lahví Barva: Šedá Hmotnost: 220 g Speciální vlastnosti Z udržitelné tkaniny: Z recyklovaného materiálu Ocean Výsuvná rukojeť: Pro snadné přenášení Vnější přední kapsa: Pro příslušenství Rozměry a záruka Rozměry: 410x270x30mm Záruka: 1 rok

Objev podobné jako ACER Vero OBP 15.6" Protective Sleeve, Retail Pack

Acer Vero OBP 15.6" Backpack <img src="/image/1653336_0a-a923fdc78a71d91-851419-620-620-3.webp"> Charakteristika Typ: Batoh pro notebook Pro notebook: do 15.6" Materiál: Udržitelná tkanina z recyklovaného materiálu Ocean Barva: Šedá Vybavení batohu Polstrované pouzdro ze vzdušné síťoviny Zadní panel (na nasouvání na zavazadlo) Přední kapsa Nastavitelné polstrované popruhy Vícekomorový organizér Vnější kapsa pro rychlý přístup Fyzické vlastnosti Materiál: Přes 50% rPET polyester Rozměry: 445x305x102mm Hmotnost: 420g Záruka: 1 rok

Objev podobné jako ACER Vero OBP 15.6

Batoh na notebook s maximální uhlopříčkou do 15,6", materiál polyester, pevné dno, voděodolná úprava a vyztužená záda, objem 24,12 l, vnější rozměry (vך×h) 43 cm × 33 cm × 17 cm, hmotnost 0,4 kg, barva šedá Potřebujete notebook doma i v práci a obáváte se jeho poškození či znečištění? Acer Vero Backpack 15.6" bude sloužit coby batoh připravený k častému nošení vašeho laptopu v bezpečné kapse uhlopříčky do 15,6". Zaujme jeho pocitvé provedení, batoh na notebook Acer vám tedy bude tím nejlepším pomocníkem. Výraznou konkurenční výhodou batohu je jeho odolnost vůči pořádné srpšce vody, zajišťujcí, že veškerý obsah batohu, stejně jako notebook, nepřijdou k úhoně. Základní funkce batohu na notebook Acer Vero Backpack 15.6" Tento batoh na notebook se hodí pro uhlopříčku až 15,6" Vrchní kapsu použijete na maličkosti, jako jsou třeba sluchátka Provedení batohu je připraveno tak, aby bez problémů pojmul kancelářské potřeby a cokoliv dalšího, co pro svůj den potřebujete...

Objev podobné jako Acer Vero Backpack 15.6" (GP.BAG11.02G)

usb flash disk ve tvaru korku
parkování ve Velkých Bílovicích

Acer Protective Sleeve 15.6\" - Dual Tone temně šedá s přední kapsou PN: NP.BAG1A.293 Detailní informace produktu Pro počítač: do 15.6\" Barva: šedá Dimenze a materiál Výška: 297 mm Šířka: 412 mm Hloubka: 18 mm Materiál: stahování na kovový zip, pevná přední kapsa, voděodolný

Objev podobné jako ACER Protective Sleeve 15.6" - Dual Tone temně šedá s přední kapsou

ACER Adapter 65W_3PHY BLK ADAPTER - EU POWER CORD (RETAIL PACK) Originální adaptér Acer určený pro standartní notebooky. Design a výkon Adaptér v černé barvě poskytuje výkon 65 W. Specifikace Značka: Acer Název produktu: 65W Síťový adaptér PN: NP.ADT0A.036 Určení: Síťový adaptér Podporované zařízení: Notebook Vstupní napětí: 230 V AC Výstupní napětí: 19 V DC Maximální výstupní výkon/napájení: 65 W Kompatibilita: Aspire 3 (A315-22G, A315-55KG, A315-55G), Aspire 5 (A515-44G, A515-54G), Swift 3 (SF313-52, SF313-52G, SF314-41G, SF314-42, SF314-57, SF314-57G), Swift 5 (SF514-54T, SF514-54GT), Spin 3 (SP314-54N), Spin 5 (SP513-54N), TravelMate X3 (TMX314-51), TravelMate P2 (TMP215-51G, TMP215-52G), TravelMate P6 (TMP614-51T, TMP614-51) Obsah balení Nabíječka Acer Acer 65W 3phy originální adaptér

Objev podobné jako ACER Adapter 65W_3PHY BLK ADAPTER - EU POWER CORD (RETAIL PACK) pro Chromebook, S7, V13 a SW5+173

Acer Protective Sleeve 14\" - Dual Tone temně šedá s přední kapsou Chráníte svůj notebook? S touto obalovou taškou Acer to bude hračka. Bezpečí pro váš notebook Taška je určena pro notebooky do 14\". Je vyrobena z odolného materiálu a má kovový zip pro bezpečné uzavření. Pohodlné použití S rozměry 265 mm na výšku, 385 mm na šířku a hloubkou 18 mm, je taška kompaktní a snadno přenosná. Stylový design Temně šedá barva a dual tone design dodávají tašce moderní vzhled. Praktická přední kapsa Pevná přední kapsa nabízí prostor pro drobné předměty, které potřebujete mít po ruce. Voděodolná Taška je voděodolná, takže se nemusíte bát případného deště. Specifikace: EAN: 4713883711449 Pro notebooky: do 14\" Barva: šedá Výška: 265 mm Šířka: 385 mm Hloubka: 18 mm Materiál: voděodolný

Objev podobné jako ACER Protective Sleeve 14" - Dual Tone temně šedá s přední kapsou

ACER 65W USB TYPE-C ADAPTER, BLACK, EU POWER CORD (RETAIL PACK) - pro zařízení s AC adapterem Type-C Potřebujete spolehlivý a výkonný adaptér pro vaše zařízení? Acer 65W ADAPTER USB-C je ideální volbou pro všechny, kdo hledají rychlé a efektivní nabíjení. Tento adaptér je navržen tak, aby poskytoval maximální výkon a spolehlivost, kterou očekáváte od značky Acer. Klíčové vlastnosti: • Výstupní výkon: 65 W • Konektor: USB-C • Barva: Černá • Kompaktní design: Snadno přenosný a ideální pro cestování Rychlé a efektivní nabíjení: S výkonem 65 W tento adaptér zajišťuje rychlé nabíjení vašich zařízení, takže můžete být vždy připraveni na další úkoly. USB-C konektor je univerzální a kompatibilní s širokou škálou zařízení, což z něj činí všestranný doplněk pro váš každodenní život. Elegantní a praktický - černý design dodává adaptéru moderní a elegantní vzhled, který se hodí k jakémukoli zařízení. Kompaktní rozměry umožňují snadné přenášení, takže ho můžete mít vždy po ruce, ať už jste doma, v kanceláři nebo na cestách. Maximální výkon 65 W Počet konektorů 1 × Konektor notebooku USB-C Rozměry a hmotnost Šířka 90 mm Výška 30 mm Hloubka 50 mm Hmotnost cca. 195g

Objev podobné jako ACER 65W USB TYPE-C ADAPTER, BLACK, EU POWER CORD (RETAIL PACK) - pro zařízení s AC adapterem Type-C

ACER USB type C docking III BLACK WITH EU POWER CORD Univerzální dokovací stanice Acer, v černé barvě, pro efektivní práci s notebookem. Konektivity USB-C (Up Stream to NB) USB-C (Down Stream to Device) 3x USB 3.1 (one BC1.2 charging) 2x DP 1.4 (4K) HDMI 2.0 (4K) RJ45 (Gigabit) Audio universal jack Stanice je vybavena Power On/Off button a 135W DC-in. Pro zabezpečení je k dispozici Kensington lock. Produkt je balen v retail pack s EU power cord.

Objev podobné jako ACER USB type C docking III BLACK WITH EU POWER CORD (RETAIL PACK)

Acer 65W USB TYPE-C ADAPTER Part Number: GP.ADT11.028 Všeobecné Typ zařízení: Napájecí adaptér - externíBarva: Černá EU POWER CORD (RETAIL PACK)

Objev podobné jako ACER Adapter 65W USB TYPE-C, EU POWER CORD (RETAIL PACK), Black

ACER NOTEBOOK CARRY BAG 14" BLACK (RETAIL PACK) Barva: Černá Rozměry Šířka výrobku: 42.7 cmVýška výrobku: 31.7 cmHloubka výrobku: 8.1 cmHmotnost výrobku: 0.5 kg

Objev podobné jako ACER NOTEBOOK CARRY BAG 14" BLACK (RETAIL PACK)

230W Acer Power Adaptor, 5.5mm, black with EU power cord (Retail pack)PN: GP.ADT11.00J Výkon napájecího zdroje (W): 45 W Napájecí konektor: 3.0 x 1.0 Počet konektorů: 1 Síťový kabel: Ne Kabel k napájení NTB: Ano

Objev podobné jako ACER Power Adaptor 230W, 5.5mm, black with EU power cord (Retail pack)

HP Protective Reversible 15 Grey/Mauve Sleeve - pouzdro Úchovna pro váš notebook Pouzdro na notebook HP Protective Reversible 15 Grey/Mauve Sleeve je vyrobeno z odolného neoprenového materiálu. Oboustranné provedení Toto pouzdro umožňuje změnu barvy podle vašich představ a nálad. Bezpečné zavírání Přetahovací zavírání bez zipu zajistí notebooku bezpečnou a spolehlivou ochranu. Pro notebooky do 15,6\" Pouzdro je určeno pro notebooky s úhlopříčkou až 39,6 cm (15,6\"). Vlastnosti produktu Rozměry produktu (š x h x v): 40 × 28,5 × 1 cm Hmotnost produktu: 0,19 kg Obsah balení V krabici naleznete pouzdro na notebook.

Objev podobné jako HP Protective Reversible 15 Grey/Mauve Sleeve - pouzdro

HP Protective Reversible 15 Blk/Slv Sleeve - pouzdro EAN produktu: 4580511806767 Popis produktu HP Protective Reversible Sleeve je praktické pouzdro pro notebooky do velikosti 15,6\". Vyrobeno z odolného neoprenového materiálu, který notebooku poskytne bezpečnou a spolehlivou ochranu. Oboustranné provedení Unikátní oboustranné provedení umožňuje změnu barvy pouzdra podle vaší nálady. Rozměry a hmotnost Rozměry: 40 × 28,5 × 1 cm Hmotnost: 0,19 kg Co je v balení V balení naleznete pouzdro na notebook.

Objev podobné jako HP Protective Reversible 15 Blk/Slv Sleeve - pouzdro

Sleeve na notebook 15,6\", Protective reversible, modrý/černý z neoprenu, HP HP Protective reversible sleeve je ideální doplněk pro váš notebook. Neoprenový materiál chrání váš počítač před nárazy a škrábanci. Reverzibilní design Modrý nebo černý? Vyberte si barvu podle své nálady. Stačí otočit pouzdro naruby a máte zcela nový vzhled. Technické specifikace Pro notebooky: až 39,6 cm (15,6\") Rozměry produktu: 40 × 28,5 × 1 cm Hmotnost produktu: 0,19 kg Neoprenový materiál Neopren je odolný a lehký materiál, který poskytuje vysokou míru ochrany. Váš notebook bude v bezpečí při každém přenášení.

Objev podobné jako Sleeve na notebook 15,6", Protective reversible, modrý/černý z neoprenu, HP

Sleeve na notebook 15.6\", Protective reversible, stříbrný/černý z neoprenu, HP Bezpečí a styl v jednom Neoprenový obal pro notebooky až do velikosti 15.6\". Praktický a proměnlivý Sleeve můžete jednoduše otočit a měnit jeho barvu podle nálady. Technické specifikace Pro notebooky s úhlopříčkou až 39,6 cm (15,6\") Rozměry produktu (š x h x v): 40 × 28,5 × 1 cm Hmotnost produktu: 0,19 kg Obal je lehký, přitom poskytuje vynikající ochranu. Perfektní volba pro každodenní použití.

Objev podobné jako Sleeve na notebook 15.6", Protective reversible, stříbrný/černý z neoprenu, HP

HP Protective Reversible 15 Blk/Geo Sleeve - pouzdro EAN: 4580511806781 Vlastnosti produktu Materiál: Neopren Provedení: Oboustranné Zavírání: Přetahovací, bez zipu Pro notebooky: až 39,6 cm (15,6\") Rozměry a hmotnost Rozměry: 40 × 28,5 × 1 cm Hmotnost: 0,19 kg Co je obsaženo v krabici Pouzdro na notebook Design a ochrana Pouzdro HP Protective Reversible nabízí dvojí design pro změnu stylu kdykoli to budete chtít. Vyrobeno z odolného neoprenu, poskytuje spolehlivou ochranu pro váš notebook.

Objev podobné jako HP Protective Reversible 15 Blk/Geo Sleeve - pouzdro

ACER Wireless Mouse G69 White Bezdrátová myš ACER G69 vám přináší dokonalou kontrolu a pohodlí při práci na počítači. Její elegantní bílý design se skvěle hodí k jakémukoli počítači. Klíčové vlastnosti Rozlišení: 1600 dpi pro precizní pohyb kurzoru Dosah: 10m pro maximální pohodlí bez nutnosti použití kabelů Provedení: obouruké pro pohodlné použití pro praváky i leváky Kompatibilita Myš je kompatibilní s Windows, Chrome OS a MacOS. Co je v balení? Kromě myši najdete v balení také 2x AAA baterie. Užijte si pohodlí bezdrátové myši ACER G69 a zlepšete svůj počítačový zážitek.

Objev podobné jako ACER Wireless Mouse G69 White - RF2.4G, 1600 dpi, 95x58x35 mm, 10m dosah, 2x AAA, Win/Chrome/Mac, Retail Pack

ACER Vero Mouse - Bezdrátová, 2.4GHz, 1200DPI, Černá Typ připojení: Bezdrátová Rozhraní: Bluetooth Frekvenční pásmo: 2,4 GHz DPI: 1 200 Dosah: Až 10 metrů Posouvací kolečko: Plynulé a tiché Tlačítka a Baterie Počet tlačítek: Tři Baterie: 2xAAA Vyrobeno z recyklovaných materiálů Materiál: 30 % ABS (recyklovaný po průmyslové výrobě) Barva: Černá

Objev podobné jako ACER Vero Mouse - Retail pack, bezdrátová, 2.4GHz, 1200DPI, Černá

FOREO FAQ™ LED Panel Protective Sleeve, 1 ks, Doplňky pro ženy, Prémiová ochrana pro váš LED panel Škrábance, prach a nárazy dokážou elegantní povrch vašeho zařízení rychle poškodit. Pouzdro FOREO FAQ™ LED Panel Protective Sleeve panel spolehlivě ochrání díky odolnému vnějšímu plášti a polstrované vnitřní podšívce, která tlumí nárazy a zároveň udržuje povrch v perfektním stavu. Navíc je lehké a přenosné, takže nebude zabírat zbytečně moc místa, což z něj dělá perfektní doplněk k vašemu LED panelu. Vlastnosti: chrání panel před škrábanci, prachem a každodenním opotřebením absorbuje nárazy a tlak udržuje panel v bezchybném stavu rozměrově přizpůsobené panelu je lehké a snadno ho kamkoliv přenesete Materiály: vnější strana z vysoce pevného polyesteru – odolná proti oděru, lehká voděodolnost vnitřní strana z měkkého neoprenu – tlumí nárazy a zabraňuje poškrábání prvotřídní prošití – dodává odolnost a klasický vzhled Jak používat: Než panel uskladníte nebo s ním budete cestovat, vložte ho do pouzdra FOREO FAQ™ LED Panel Protective Sleeve, které ho těsně obepne a zajistí mu maximální ochranu.

Objev podobné jako FOREO FAQ™ LED Panel Protective Sleeve polstrované ochranné pouzdro na LED panel od značky FAQ 1 ks

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-V12-ZE2434CPDHU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

ACER 45W_USB Type C Adapter, Black Univerzální adaptér pro zařízení s USB C. Technické specifikace: Vstupní napětí: 230 V AC Výstupní napětí: 15 V DC, 20 V DC, 5 V DC, 9 V DC Maximální výstupní proud: 3 A Maximální výstupní výkon: 45 W Podporované zařízení: Chromebook Notebook Tablet PC Adaptér je dodáván v černé barvě a je součástí retailového balení.

Objev podobné jako ACER 45W_USB Type C Adapter, Black - pro zařízení s USB C, EU POWER CORD (RETAIL PACK)

This RAM Mounts GDS Desktop Dock with Power Delivery is suitable for smartphones and tablets in IntelliSkin Next Gen, IntelliSkin & IntelliSkin HD protective sleeves. The charging station offers data connectivity via USB-C and the charging function. It is also ideal for permanent use (insertion/removal). Product features RAM Mounts RAM-GDS-DOCK-D2CM-NDU-GRY: Only compatible with IntelliSkin Next Gen protective sleeve Easy insertion and removal Power Delivery & DeX Support (Next Gen) Input Connector: USB-C Output Voltage: 5V @ 2A 5V @ 3A 12V @ 1.5A 12V @ 3A Output Power: 48W Total Product dimensions: Height: 5,08 cm Width: 7,62 cm Depth: 10,41 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-D2CM-NDU-GRY Dock is supplied.

Objev podobné jako RAM Mounts GDS Desktop Dock mit Power Delivery for Smartphones and Tablets - In IntelliSkin Next Gen Protective Sleeve - DeX Support (Next Gen) - USB-

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM76CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM78CPU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AInput Cable Length: ca. 21 cmAdditional information: Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+- in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CU: Compatible with GDS hand-stand & more Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Transfer Speed: 5Gbps Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Power Supply

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connect

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CP-NFCU: Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Including RAM NFC-Extender Additional information: This product is not compatible with the GDS Hand-Stand. This holder will not support any NFC functionality of the Tab Active2 Potential interference of NFC functionality may occur when positioned close to strong magnets. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CP-NFCU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 in IntelliSkin Protective Sleeve - NFC-Extender - USB-C Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C 3.1 Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active2, Active3 & Active5 - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM76CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM76CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, S9 & S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM76CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM76CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7, S9 & S9 FE - in IntelliSkin Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab S7, Tab S9 & Tab S9 FE in IntelliSkin protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. Data synchronization via the connection is also supported. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM78CU: Compatible with GDS hand-stand Easy insertion and removal Charging function Data synchronization Lockable with key Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Input Cable Length: ca. 35 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM78CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ in IntelliSkin Protective Sleeve - USB-C Power Supp

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9 & A7 Lite 8.7" - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connect

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Dual USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80-MMU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9 & A7 Lite (8.7") - in IntelliSkin Next Gen Protective Sleeve - Multi-Mode - USB-C & USB-A

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector