4anglersdesign mikina carp fishing it s in my dna m

Příjemná mikina Adventer & fishing COTTON HOODIE z teplákoviny s velkou kapsou a kapucí. Stylovou khaki barvu doplňuje pískově hnědý nápis Adventer & fishing. Pohodlná mikina se stane nepostradatelným kouskem vašeho šatníku.

Objev podobné jako ADVENTER & FISHING COTTON HOODIE Pánská bavlněná mikina, khaki, velikost

Příjemná mikina Adventer & fishing COTTON HOODIE z teplákoviny s velkou kapsou a kapucí. Stylovou khaki barvu doplňuje pískově hnědý nápis Adventer & fishing. Pohodlná mikina se stane nepostradatelným kouskem vašeho šatníku.

Objev podobné jako ADVENTER & FISHING COTTON HOODIE Pánská bavlněná mikina, khaki, velikost

Příjemná mikina Adventer & fishing COTTON HOODIE z teplákoviny s velkou kapsou a kapucí. Stylovou khaki barvu doplňuje pískově hnědý nápis Adventer & fishing. Pohodlná mikina se stane nepostradatelným kouskem vašeho šatníku.

Objev podobné jako ADVENTER & FISHING COTTON HOODIE Pánská bavlněná mikina, khaki, velikost

Příjemná mikina Adventer & fishing COTTON HOODIE z teplákoviny s velkou kapsou a kapucí. Stylovou khaki barvu doplňuje pískově hnědý nápis Adventer & fishing. Pohodlná mikina se stane nepostradatelným kouskem vašeho šatníku.

Objev podobné jako ADVENTER & FISHING COTTON HOODIE Pánská bavlněná mikina, khaki, velikost

Pánská termo mikina Adventer & fishing THERMO SHIRT slouží jako ideální druhá vrstva k zateplení vašeho funkčního outfitu v nepříznivém počasí. Její materiál je poddajný a rychle schne. Mikina na zip má nadčasovou šedou barvu, černé rukávy a dvě uzavíratelné kapsy. Je skvělou volbou nejen na ryby.

Objev podobné jako ADVENTER & FISHING THERMO SHIRT Pánská hřejivá mikina Prostrech, šedá, velikost

Pánská termo mikina Adventer & fishing THERMO SHIRT slouží jako ideální druhá vrstva k zateplení vašeho funkčního outfitu v nepříznivém počasí. Její materiál je poddajný a rychle schne. Mikina na zip má nadčasovou šedou barvu, černé rukávy a dvě uzavíratelné kapsy. Je skvělou volbou nejen na ryby.

Objev podobné jako ADVENTER & FISHING THERMO SHIRT Pánská hřejivá mikina Prostrech, šedá, velikost

Pánská termo mikina Adventer & fishing THERMO SHIRT slouží jako ideální druhá vrstva k zateplení vašeho funkčního outfitu v nepříznivém počasí. Její materiál je poddajný a rychle schne. Mikina na zip má nadčasovou šedou barvu, černé rukávy a dvě uzavíratelné kapsy. Je skvělou volbou nejen na ryby.

Objev podobné jako ADVENTER & FISHING THERMO SHIRT Pánská hřejivá mikina Prostrech, šedá, velikost

Hudební CD - a dlouho očekávané desce najdete nejen současný titulní hit City in the city, ale také singly Mrazí, Adrenalin, Nádech a Křídla a dalších pět písní. Poslední dva jmenované songy navíc i ve speciálních verzích - v remixu a akusticky. Na dlouho očekávané desce najdete nejen současný titulní hit City in the city, ale také singly Mrazí, Adrenalin, Nádech a Křídla a dalších pět písní. Poslední dva jmenované songy navíc i ve speciálních verzích - v remixu a akusticky. Rok vydání : 2021 Seznam stop CD Nádech / Domovina / Mrazí / City in the city / Nech vítr vát / Adrenalin / Křídla / Hejbej boky! / Nouzová situace / Moje všechno / Křídla (acoustic) / Nádech (remix)

Objev podobné jako Like-It: City in the city - CD (8594171281297)

Flik Flak Dětské hodinky In My Bag ZFBNP247

Objev podobné jako Flik Flak Dětské hodinky In My Bag ZFBNP247

Hudební CD - Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Na CD nebo v rozšířené variantě na 2CD mimo jiné najdete duet s Robbie Williamsem nebo zbrusu novou skladbu Stop Loving Her Today. Britský rockový zpěvák a skladatel patří mezi komerčně nejúspěšnější interprety všech dob. Celosvětově prodal na 100 milionů desek, získal bezpočet různých ocenění a natočil celou řadu nezapomenutelných písní. V roce 1994 byl zvolen do rock'n'rollové síně slávy. Uznávaný hudební měsíčník Q ho v anketě o nejlepšího zpěváka všech dob zařadil na třiatřicáté místo. Seznam stop CD1 Maggie May / It Takes Two (with Robbie Williams) / Sailing / Reason To Believe / Handbags and Gladrags / Tonight's The Night (Gonna Be Alright) / I Don't Want To Talk About It / The First Cut Is The Deepest / You're In My Heart (The Final Acclaim / I Was Only...

Objev podobné jako Stewart Rod: You're In My Heart: Rod Stewart With The Royal Philharmonic Orchestra (2x CD) - CD (0349784965)

Kniha - 352 stran, anglicky, brožovaná bez přebalu matná This love is all-consuming It is in 1950s' Brighton that Marion first catches sight of the handsome and enigmatic Tom. He teaches her to swim in the shadow of the pier and Marion is smitten - determined her love will be enough for them both. A few years later in Brighton Museum Patrick meets Tom. Patrick is besotted with Tom and opens his eyes to a glamorous, sophisticated new world. Tom is their policeman, and in this age it is safer for him to marry Marion. The two lovers must share him, until one of them breaks and three lives are destroyed.

Objev podobné jako My Policeman. Tie-In: NOW A MAJOR FILM STARRING HARRY STYLES (1529115760)

LP vinyl - Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Hit Vánoc 2019, který původně vyšel na CD nebo v rozšířené variantě na 2CD, je nyní k dispozici rovněž na 2LP. Na albu mimo jiné najdete duet s Robbie Williamsem nebo zbrusu novou skladbu Stop Loving Her Today. Britský rockový zpěvák a skladatel patří mezi komerčně nejúspěšnější interprety všech dob. Celosvětově prodal na 100 milionů desek, získal bezpočet různých ocenění a natočil celou řadu nezapomenutelných písní. V roce 1994 byl zvolen do rock'n'rollové síně slávy. Uznávaný hudební měsíčník Q ho v anketě o nejlepšího zpěváka všech dob zařadil na třiatřicáté místo. Obsah: LP1 Maggie May Reason To Believe Handbags and Gladrags Sailing Tonight's The Night (Gonna Be Alright) I Don't Want To Talk About It You're In My Heart (The Final Acclaim) I Was Only Joking Young Turks Forever...

Objev podobné jako Stewart Rod: You're In My Heart: Rod Stewart With The Royal Philharmonic Orchestra (2x LP) - LP (0349784964)

Lak na nehty - lesklý, vytváří efekt gelových nehtů, barva žlutá, objem 15 ml Chcete mít hezky upravené nehty? Lak na nehty O.P.I. se vám určitě zalíbí. Díky složení uschne během chvilky, takže se po nanesení nemusíte obávat, že jej omylem setřete. Pokud máte dost laků na nehty, které jsou druhý den oloupané, představuje pro vás tato varianta s dlouhotrvajícím efektem vhodnou volbu. Gelové nehty nemusí být každému příjemné. Pokud si chcete zachovat zdravé nehty, pak vyzkoušejte tento produkt, který umí vytvořit efekt gelových nehtů. Lesklé laky na nehty O.P.I. se blýsknou při každé příležitosti, ať už chcete své nehty udělat krásnější na svatbu, dovolenou, nebo jen tak pro radost. Zásadní vlastnosti laku na nehty OPI Nail Lacquer Sun, Sea and Sand in My Pants 15 ml Velice rychle usychá Gelový lak na nehty O.P.I. Lesklá textura, se kterou nikdy nešlápnete vedle Barva laku na nehty O.P.I. je žlutá Vydrží vám na rukou déle Lak na nehty O.P.I. obdržíte o objemu...

Objev podobné jako OPI Nail Lacquer Sun, Sea and Sand in My Pants 15 ml (09415913)

LP vinyl - Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Hit Vánoc 2019, který původně vyšel na CD nebo v rozšířené variantě na 2CD, je nyní k dispozici rovněž na 2LP. Na albu mimo jiné najdete duet s Robbie Williamsem nebo zbrusu novou skladbu Stop Loving Her Today. Britský rockový zpěvák a skladatel patří mezi komerčně nejúspěšnější interprety všech dob. Celosvětově prodal na 100 milionů desek, získal bezpočet různých ocenění a natočil celou řadu nezapomenutelných písní. V roce 1994 byl zvolen do rock'n'rollové síně slávy. Uznávaný hudební měsíčník Q ho v anketě o nejlepšího zpěváka všech dob zařadil na třiatřicáté místo. Obsah: LP1 Maggie May Reason To Believe Handbags and Gladrags Sailing Tonight's The Night (Gonna Be Alright) I Don't Want To Talk About It You're In My Heart (The Final Acclaim) I Was Only Joking Young Turks Forever...

Objev podobné jako Stewart Rod: You're In My Heart: Rod Stewart With The Royal Philharmonic Orchestra (2x LP Pink Vinyl (8122790808)

Hudební CD - Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Kompilace představuje výběr největších hitů Roda Stewarta s orchestrálními aranžemi. Na CD nebo v rozšířené variantě na 2CD mimo jiné najdete duet s Robbie Williamsem nebo zbrusu novou skladbu Stop Loving Her Today. Britský rockový zpěvák a skladatel patří mezi komerčně nejúspěšnější interprety všech dob. Celosvětově prodal na 100 milionů desek, získal bezpočet různých ocenění a natočil celou řadu nezapomenutelných písní. V roce 1994 byl zvolen do rock'n'rollové síně slávy. Uznávaný hudební měsíčník Q ho v anketě o nejlepšího zpěváka všech dob zařadil na třiatřicáté místo. Seznam stop CD1 Maggie May / It Takes Two (with Robbie Williams) / Sailing / Reason To Believe / Handbags and Gladrags / Tonight's The Night (Gonna Be Alright) / I Don't Want To Talk About It / The First Cut Is The Deepest / You're In My Heart (The Final Acclaim) / I Was Only...

Objev podobné jako Stewart Rod: You're In My Heart: Rod Stewart With The Royal Philharmonic Orchestra - CD (0349784896)

LP vinyl - Skupinu The Rat Pack tvoří Frank Sinatra, Dean Martin a Sammy Davis Jr. Skupinu The Rat Pack tvoří Frank Sinatra, Dean Martin a Sammy Davis Jr. Seznam stop LP 1 Strana A / The Lady Is A Tramp - Frank Sinatra / Sam's Song - Sammy Davis Jr. & Dean Martin / A Lot Of Livin' To Do - Sammy Davis Jr / Volare - Dean Martin / Come Fly With Me - Frank Sinatra / All I Do Is Dream Of You - Dean Martin / Too Close For Comfort - Sammy Davis Jr / You Make Me Feel So Young - Frank Sinatra / LP 1 Strana B / Buona Sera - Dean Martin / Me And My Shadow - Sammy Davis Jr. & Frank Sinatra / Ring-A-Ding-Ding! - Frank Sinatra / Eee-O Eleven - Sammy Davis Jr / You're Nobody `Til Somebody Loves You - Dean Martin / Something's Coming - Sammy Davis Jr / One For My Baby (And One More For The Road) - Frank Sinatra / The Party's Over - Sammy Davis Jr

Objev podobné jako Rat Pack: It Happened In Vegas - LP (4260494436020)

Hudební CD - První album irské skupiny Inhaler. První album irské skupiny Inhaler. Rok vydání : 2021 (1.album) Seznam stop CD It Won't Always Be Like This / My Honest Face / Slide out the Window / Cheer Up Baby / A Night on the Floor / My King Will Be Kind / When It Breaks / Who's Your Money On? (Plastic House) / Totally / Strange Time to Be Alive / In My Sleep

Objev podobné jako Inhaler: It Won't Always Be Like This - CD (3585851)

LP vinyl - První album irské skupiny Inhaler. První album irské skupiny Inhaler. Rok vydání : 2021 (1.album) Seznam stop LP It Won't Always Be Like This / My Honest Face / Slide out the Window / Cheer Up Baby / A Night on the Floor / My King Will Be Kind / When It Breaks / Who's Your Money On? (Plastic House) / Totally / Strange Time to Be Alive / In My Sleep

Objev podobné jako Inhaler: It Won't Always Be Like This - LP (3566019)

Triko, co běží s tebou až do cíleS mikinou adidas Run It LS zůstaneš v pohodlí při každém kilometru. Lehký recyklovaný polyester s technologií AEROREADY efektivně odvádí pot, takže se budeš cítit svěže od startu až po finiš. Dlouhý rukáv chrání před chladem i sluncem a regular fit střih ti dá naprostou volnost pohybu. Reflexní detaily zajistí, že budeš vidět i při večerním běhu.Výhody100 % recyklovaný polyester – lehký, odolný a šetrný k planetě.Technologie AEROREADY – spolehlivý odvod vlhkosti.Dlouhé rukávy – ochrana před počasím i komfort navíc.Reflexní prvky – lepší viditelnost při slabším světle.Triko, které tě podrží při každém tréninku – funkční, lehké a vždy připravené na další běh.Aeroready. Aeroready je technologie od Adidasu, která odvádí pot, udržuje optimální teplotu a rychle schne. Je ideální pro sportovce a všechny, kteří chtějí komfortní a funkční oblečení.

Objev podobné jako adidas Run It Long Sleeve Sweatshirt S

Triko, co běží s tebou až do cíleS mikinou adidas Run It LS zůstaneš v pohodlí při každém kilometru. Lehký recyklovaný polyester s technologií AEROREADY efektivně odvádí pot, takže se budeš cítit svěže od startu až po finiš. Dlouhý rukáv chrání před chladem i sluncem a regular fit střih ti dá naprostou volnost pohybu. Reflexní detaily zajistí, že budeš vidět i při večerním běhu.Výhody100 % recyklovaný polyester – lehký, odolný a šetrný k planetě.Technologie AEROREADY – spolehlivý odvod vlhkosti.Dlouhé rukávy – ochrana před počasím i komfort navíc.Reflexní prvky – lepší viditelnost při slabším světle.Triko, které tě podrží při každém tréninku – funkční, lehké a vždy připravené na další běh.Aeroready. Aeroready je technologie od Adidasu, která odvádí pot, udržuje optimální teplotu a rychle schne. Je ideální pro sportovce a všechny, kteří chtějí komfortní a funkční oblečení.

Objev podobné jako adidas Run It Long Sleeve Sweatshirt 2XL

Triko, co běží s tebou až do cíleS mikinou adidas Run It LS zůstaneš v pohodlí při každém kilometru. Lehký recyklovaný polyester s technologií AEROREADY efektivně odvádí pot, takže se budeš cítit svěže od startu až po finiš. Dlouhý rukáv chrání před chladem i sluncem a regular fit střih ti dá naprostou volnost pohybu. Reflexní detaily zajistí, že budeš vidět i při večerním běhu.Výhody100 % recyklovaný polyester – lehký, odolný a šetrný k planetě.Technologie AEROREADY – spolehlivý odvod vlhkosti.Dlouhé rukávy – ochrana před počasím i komfort navíc.Reflexní prvky – lepší viditelnost při slabším světle.Triko, které tě podrží při každém tréninku – funkční, lehké a vždy připravené na další běh.Aeroready. Aeroready je technologie od Adidasu, která odvádí pot, udržuje optimální teplotu a rychle schne. Je ideální pro sportovce a všechny, kteří chtějí komfortní a funkční oblečení.

Objev podobné jako adidas Run It Long Sleeve Sweatshirt M

Triko, co běží s tebou až do cíleS mikinou adidas Run It LS zůstaneš v pohodlí při každém kilometru. Lehký recyklovaný polyester s technologií AEROREADY efektivně odvádí pot, takže se budeš cítit svěže od startu až po finiš. Dlouhý rukáv chrání před chladem i sluncem a regular fit střih ti dá naprostou volnost pohybu. Reflexní detaily zajistí, že budeš vidět i při večerním běhu.Výhody100 % recyklovaný polyester – lehký, odolný a šetrný k planetě.Technologie AEROREADY – spolehlivý odvod vlhkosti.Dlouhé rukávy – ochrana před počasím i komfort navíc.Reflexní prvky – lepší viditelnost při slabším světle.Triko, které tě podrží při každém tréninku – funkční, lehké a vždy připravené na další běh.Aeroready. Aeroready je technologie od Adidasu, která odvádí pot, udržuje optimální teplotu a rychle schne. Je ideální pro sportovce a všechny, kteří chtějí komfortní a funkční oblečení.

Objev podobné jako adidas Run It Long Sleeve Sweatshirt XL

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve.The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-SAM62CD2U:Compatible with GDS hand-stand Easy insertion and removalCharging functionWith LatchInput Connector: USB-CPower Output: 15WOutput Voltage: 5-12V @ 3AOutput Connector: 2x USB-A (Peripheral output - 900mAh per Port)Input Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmAdditional information: This product will not support the "No Battery Mode" function.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-SAM62CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connector

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM62CU: Compatible with GDS hand-stand & more Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 60W Output Voltage: 5-20V @ 3A Transfer Speed: 5Gbps Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM62CU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Power Supply

This RAM Mounts GDS Cool-Dock (Latch) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Latch) for Samsung Tab S7 FE, S7+, S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 und Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM62CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM62CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - With Fan - USB-C Connect

This RAM Mounts GDS Cool-Dock (Key-Locking) holder is suitable for the Samsung Tab S7 FE (SM-T736B), S7+ (12.4“ SM-T970), S8+, S9 FE+, S9+ & S10+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock including a built-in 12-VDC Axial cooling fan with a 2.2 meter long hardwire power cord. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKLF-SAM78CPU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Input Cable Length: ca. 21 cm Includes built-in 12-VDC Axial cooling fan Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKLF-SAM78CPU holder is supplied.

Objev podobné jako RAM Mounts GDS Cool-Dock Holder (Key-Locking) for Samsung Tab S8+, S9 FE+, S9+ & S10+ - in IntelliSkin Next Gen Protective Sleeve - USB-C Power Supply

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A8 (10.5“) in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm · Prepared for GDS 12-VDC Axial cooling fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A9 & A7 Lite 8.7" - in IntelliSkin Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Key-Locking) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-SAM80CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function Lockable with key Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCKL-SAM80CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Key-Locking) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connect

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-C cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62C-CU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-C (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62C-CU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Dual USB-C Connector

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab A9 & A7 Lite 8.7" in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80-MMU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9 & A7 Lite (8.7") - in IntelliSkin Next Gen Protective Sleeve - Multi-Mode - USB-C & USB-A

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A8 10.5" (SM-X200) in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM83CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM83CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A8 (10.5“) - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A9+ in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM88CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM88CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A9+ - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab Active2, Active3 and Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Prepared for GDS-FAN 12-VDC axial fan Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS Tough-Dock (Latch) holder with Multi-Mode is suitable for the Samsung Tab Active2, Active3 & Active5 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. Mutli-mode is integrated into the dock allowing centralized AI systems to perform as the host instead of the tablet, turning your IntelliSkin-wrapped tablet into a peripheral. There is no button or switch that turns this function on and off—Multi-Mode is automatically activated when the device is docked. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM62-MMU: Compatible with GDS hand-stand Easy insertion and removal Charging function Multi-mode With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max (Peripheral: 5V - 900mA max) Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This product will not support the "No Battery Mode" function. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM62-MMU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab Active3 & Active5 - in IntelliSkin Next Gen Protective Sleeve - Multi-Mode - USB-C & USB-A Co

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in Dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CD2U: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A max Output Connector: 2x USB-A (Peripheral output - 900mAh per Port) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CD2U holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C & Dual USB-A Connecto

This RAM Mounts GDS Tough-Dock (Latch) holder is suitable for the Samsung Tab A7 Lite (8.7“) & A9 in IntelliSkin Next Gen protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-SAM80CDU: Compatible with GDS hand-stand Easy insertion and removal Charging function With Latch Input Connector: USB-C Power Output: 15W Output Voltage: 5-12V @ 3A Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-SAM80CDU holder is supplied.

Objev podobné jako RAM Mounts GDS Tough-Dock Holder (Latch) for Samsung Tab A7 Lite (8.7“) & A9 - in IntelliSkin Next Gen Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 & DB9 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2-DB9KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (key-locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub-Anschluss

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDU: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PDU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form Fit (Latch) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable & DB9 connector. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2-DB9U: Compatible with OEM hand strap Easy insertion and removal Charging function With Latch Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 & DB9 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2-DB9U holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Latch) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A/DB-Sub Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PD2KLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PD2KLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & Dual USB-A Connector

This RAM Mounts Form Fit (key-locking) holder is suitable for the Honeywell ScanPal EDA10A Tablet in OEM protective boot. The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons and ports allow you to continue using them without any problems. The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back. RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Honeywell ScanPal EDA10A. An RAM NFC add-on module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included). Product features RAM Mounts RAM-HOL-HON11PDKLU: Compatible with OEM hand strap Easy insertion and removal Charging function Lockable with key Prepared for RAM NFC Extender & RAM Vent-Temp 2-Hole side mount (Diamond ball base) for additional devices or peripheral accessories Input Connector: 5.5mm DC-Connector Input Voltage: 5V Output Connector: USB-A 2.0 (Peripheral output - 500mAh) Transferspeed: 12Mbps Input Cable Length: ca. 100 cm Output Cable Length: ca. 25 cm Certifications: RoHS, WEEE, CE & FCC Additional information: Devices shown are not included in the delivery. Only the RAM-HOL-HON11PDKLU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Holder (Key-Locking) for Honeywell ScanPal EDA10A Tablet in OEM Protective Boot - 5.5mm DC & USB-A Connector

This RAM Mounts Form-Fit Low Profile (Latch) holder is suitable for Samsung Tab Active3 & Active5 in OEM or RAM protective sleeve. The holder is powered by a USB-C connection and charges the device in the dock while peripheral support is provided by the built-in USB-C/A cable. To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position. The cut-outs on the buttons allow you to continue using them without any problems. An RAM NFC-Extender module can be used to extend the device's internal NFC reader. The back of the device holder is prepared to support a round ball base (not included). Product features RAM Mounts RAM-HOL-SAM58CPT-CAU: Compatible with accessories such as RAM NFC-Repeater Can only be used with OEM or RAM skin Slim-profile design at 2.28" depth Access to the stylus pen Optional attachment of additional devices or accessories Easy insertion and removal With Latch Charging function Input Connector: USB-C Output Connector: USB-C & USB-A (Peripheral output - 900mAh per Port) Transfer-Speed: 480Mbps Input Voltage: 5.3-5.4 VDC Output Voltage: 5 VDC Input Cable Length: ca. 21 cm Output Cable Length: ca. 21 cm Additional information: This dock is not compatible with the GDS Hand-Stand, RAM Temp-Right, or GDS Roto-Mag. Devices shown are not included in the delivery. Only the RAM-HOL-SAM58CPT-CAU holder is supplied.

Objev podobné jako RAM Mounts Form-Fit Low Profile Holder (Latch) for Samsung Tab Active3 & Active5 - In OEM/RAM Sleeve - USB-C & USB-C/A Connector