Tp-link omada jetstream switch tl-sg2218p (16xgbe, 2xsfp, 16xpoe+, 150w)

TP-Link JetStream switch TL-SG2218P 18portový gigabitový smart switch JetStream s 16 porty PoE+ 150 W PoE Budget: 16× 802.3at/af kompatibilních PoE+ portů s celkovým napájením 150 W. Plně gigabitové porty: 16× gigabitové porty PoE+ a 2× gigabitové SFP sloty poskytují vysokorychlostní připojení. Integrováno do Omada SDN: Zero-Touch Provisioning (ZTP), centralizovaná správa cloudu a inteligentní monitorování. Centralizovaná správa: Přístup ke cloudu a aplikace Omada pro maximální pohodlí a snadnou správu. Static routing: Pomáhá směrovat interní provoz pro efektivnější využití síťových zdrojů. Robustní bezpečnostní strategie: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication a další. Optimalizujte hlasové a video aplikace: L2/L3/L4 QoS a IGMP snooping. IPv6: Podpora IPv6 s duálním zásobníkem IPv4/IPv6, snooping MLD, zjišťování sousedů IPv6. Learn more about TP-Link PoE technology > Learn more about Omada Cloud SDN>? Stránky produktu: https://www.tp-link.com/us/business-networking/omada-sdn-switch/tl-sg2218p/ Technické specifikace HARDWARE FEATURES Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x Interface • 16× 10/100/1000 Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) • 2× Gigabit SFP Slots Network Media • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) • 1000BASE-X: MMF, SMF Fan Quantity 1 Power Supply 100-240V AC, 50/60Hz PoE Ports (RJ45) • Standard: 802.3at/af compliant • PoE+ Ports: 16 Ports • PoE Power Budget: 150 W* Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in. (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption • 181.4 W (110 V/60 Hz) (with 150 W PD connected) • 178.3 W (220 V/50 Hz) (with 150 W PD connected) Max Heat Dissipation • 619.06 BTU/hr (110 V/60 Hz) (with 150 W PD connected) • 608.52 BTU/hr (220 V/50 Hz) (with 150 W PD connected) PERFORMANCE Switching Capacity 36 Gbps Packet Forwarding Rate 26.78 Mpps MAC Address Table 8K Packet Buffer Memory 4.1 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 802.1p CoS/DSCP priority • 8 priority queues • Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control - Port/Flow based Rating Limit • Smoother Performance • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control L2 and L2+ Features • 16 IP Interfaces - Support IPv4/IPv6 Interface • Static Routing - 32 IPv4/IPv6 Static Routes • DHCP Server • DHCP Relay - DHCP Interface Relay - DHCP VLAN Relay • DHCP L2 Relay • Static ARP • Proxy ARP • Gratuitous ARP • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection • Flow Control - 802.3x Flow Control • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED VLAN • VLAN Group - Max. 4K VLAN Groups • 802.1Q tag VLAN • MAC VLAN: 12 Entries • Protocol VLAN • GVRP • Voice VLAN Access Control List • Support up to 230 entries • Time-Range - Time Slice - Week Time-Range - Absolute Time-Range - Holiday • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - IP Protocol - TCP Flag - TCP/UDP Source Port - TCP/UDP Destination Port - DSCP/IP TOS • IPv6 ACL • Combined ACL • Rule Operation - Permit/Deny • Policy Action - Mirror - Rate Limit - Redirect - QoS Remark • ACL Rules Binding - Port Binding - VLAN Binding • Actions for flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark Security • AAA • 802.1X - Port based authentication - MAC (Host) based authentication - Authentication Method includes PAP/EAP-MD5 - MAB - Guest VLAN - Support Radius authentication and accountability • IP/IPv6-MAC Binding - 512 Binding Entries - DHCP Snooping - DHCPv6 Snooping - ARP Inspection - ND Detection • IP Source Guard - 253 Entries - Source IP+Source MAC • IPv6 Source Guard - 183 Entries - Source IPv6 Address+Source MAC • DoS Defend • Static/Dynamic/Permanent Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC based access control IPv6 • IPv6 Static Routing and ACL • IPv6 Dual IPv4/IPv6 • IPv6 Interface • Multicast Listener Discovery (MLD) Snooping • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet(v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP Advanced Features • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule MIBs • MIB II (RFC1213) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIBs • RMON MIB(RFC1757, rmon 1,2,3,9) MANAGEMENT Omada App Yes, through • Omada Cloud-Based Controller • OC300 • OC200 • Omada Software Controller Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller OC300 • Omada Hardware Controller OC200 • Omada Software Controller Cloud Access Yes, through • Omada Cloud-Based Controller • OC300 • OC200 • Omada Software Controller Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller Management Features • Web-based GUI • Command Line Interface (CLI) through telnet • SNMPv1/v2c/v3 • SNMP Trap/Inform • RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents TL-SG2218P • Power Cord • Installation Guide • Rackmount Kit • Rubber Feet System Requirements Microsoft Windows XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–50 °C (32–122 °F); • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG2218 EAN: 6935364006419 Obecný popis TP-Link JetStream TL-SG2218 je inteligentní switch s 16 gigabitovými porty RJ45 a 2 porty SFP pro vysokorychlostní připojení. Integrace do platformy Omada SDN Switch je integrován do platformy Omada SDN, která nabízí funkci ZTP (Zero-Touch Provisioning), centralizovanou cloudovou správu a inteligentní monitorování. Centralizovaná správa Pro maximální pohodlí a snadnou správu je k dispozici cloudový přístup a aplikace Omada. Statické směrování Statické směrování pomáhá směrovat tok dat po lokální síti pro efektivní využití síťových prostředků. Robustní strategie zabezpečení Switch nabízí robustní strategii zabezpečení s funkcemi jako vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS a další. Optimalizace přenosu hlasu a videa Díky funkcím L2/L3/L4 QoS a IGMP Snooping je zajištěn optimalizovaný přenos hlasu a videa v aplikacích. Samostatná správa Switch nabízí pokročilé možnosti správy prostřednictvím webového rozhraní, CLI, SNMP, RMON a funkce Dual Image. Technické specifikace Interface: 16× 10/100/1000 Mbps RJ45 Ports, 2× Gigabit SFP Slots Fan Quantity: Fanless Power Supply: 100-240 V AC 50/60 Hz Dimensions: 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting: Rack Mountable Max Power Consumption: 12.3 W (220 V/50 Hz) Max Heat Dissipation: 41.97 BTU/hr Switching Capacity: 36 Gbps Packet Forwarding Rate: 26.8 Mpps MAC Address Table: 8K Jumbo Frame: 9 KB Software Features Switch nabízí řadu software features jako 8 priority queues, 802.1p CoS/DSCP priority, Link Aggregation, Spanning Tree Protocol, Flow Control, Mirroring a mnoho dalších. VLAN Switch podporuje VLAN Group s Max 4K VLAN Groups, 802.1q Tagged VLAN, MAC VLAN, Protocol VLAN, GVRP, VLAN VPN (QinQ) a Voice VLAN. Access Control List Switch nabízí podporu pro Time-based ACL, MAC ACL, IP ACL, Combined ACL, Packet Content ACL, IPv6 ACL a Policy. Security Switch nabízí robustní zabezpečení s funkcemi jako IP-MAC-Port Binding, IPv6-MAC-Port Binding, DoS Defend, Static/Dynamic Port Security, Broadcast/Multicast/Unicast Storm Control, IP/Port/MAC based access control a 802.1X. IPv6 Switch podporuje IPv6 Dual IPv4/IPv6, Multicast Listener Discovery (MLD) Snooping, IPv6 ACL, IPv6 Interface, Static IPv6 Routing a další. L3 Features Switch podporuje 16 IPv4/IPv6 Interfaces, Static Routing, Static ARP, DHCP Server, DHCP Relay a DHCP L2 Relay. Management Switch nabízí možnosti správy prostřednictvím Web-based GUI, Command Line Interface (CLI) through console port, telnet, SNMPv1/v2c/v3, SDM Template, DHCP/BOOTP Client a další. Advanced Features Switch podporuje Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller, Automatic Device Discovery, Batch Configuration, Batch Firmware Upgrading a další. MIBs Switch podporuje MIB II (RFC1213), Bridge MIB (RFC1493), P/Q-Bridge MIB (RFC2674), Radius Accounting Client MIB (RFC2620), Radius Authentication Client MIB (RFC2618), Remote Ping, Traceroute MIB (RFC2925) a další. Management Switch podporuje Omada App, Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller, Cloud Access a Zero-Touch Provisioning. Certifikace Switch je certifikován CE, FCC, RoHS. Balení obsahuje TL-SG2218 Switch Power Cord Quick Installation Guide Rackmount Kit Rubber Feet Systémové požadavky Microsoft Windows 98SE, NT, 2000, XP, Vista™ nebo Windows 7/8/10/11, MAC OS, NetWare, UNIX nebo Linux. Provozní podmínky Provozní teplota: 0–40 °C (32–104 °F); Skladovací teplota: -40–70 °C (-40–158 °F); Provozní vlhkost: 10–90% RH non-condensing; Skladovací vlhkost: 5–90% RH non-condensing. (tonerpartner.cz)

TP-Link OMADA JetStream switch TL-SG2210MP Obecný popis 10portový gigabitový inteligentní switch JetStream s 8 porty PoE+. Vlastnosti Příkon přes PoE až 150 W 8 gigabitových portů s napájením přes PoE + 2 gigabitové SFP sloty Integrováno do Omada SDN Centralizovaná správa: Přistup do cloudu a aplikace Omada Robustní bezpečnostní strategie Optimalizace hlasových a video aplikací Technické specifikace Hardware Standardy a protokoly: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p Rozhraní: 8× 10/100/1000 Mbps RJ45 Ports, all supporting PoE+ (Auto-Negotiation/Auto MDI/MDIX) • 2× 100/1000 Mbps SFP Slots Síťové médium: 10BASE-T: UTP/STP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP/STP category 5, 5e or above cable (maximum 100m) • 100BASE-FX: MMF, SMF • 1000BASE-X: MMF, SMF Počet ventilátorů: 1 Zámek fyzické zabezpečení: Ano Napájení: 100-240V AC, 50/60Hz PoE+ Ports(RJ45): Standard: 802.3at/af compliant • PoE+ Ports: 8 Ports • Power Supply: 150 W Dimenze: 11.6 x 7.1 x 1.7 in (294 x 180 x 44 mm) Montáž: Rackmount/Desktop Maximální spotřeba energie: 12.2 W (110 V / 60 Hz with no PD connected) • 173.9 W (110 V / 60 Hz with 150 W PD connected) Maximální odvod tepla: 41.63 BTU/h (with no PD connected) • 539.35 BTU/h (with 150 W PD connected) Výkon Přepínací kapacita: 20 Gbps Rychlost předávání paketů: 14.9 Mpps Tabulka MAC adres: 8K Buffer paketů: 4.1 Mbit Jumbo Frame: 9 KB Software Kvalita služby: 802.1p CoS/DSCP priority • 8 priority queues • Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control - Port/Flow based Rating Limit • Smoother Performance • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control L2 a L2+ funkce: DHCP Relay - DHCP VLAN Relay • DHCP L2 Relay • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection • Flow Control - 802.3x Flow Control • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED ... (zbytek textu je příliš dlouhý, takže nebyl zahrnut) ... (tonerpartner.cz)

TP-Link JetStream switch TL-SG2016P 16portový gigabitový smart switch JetStream s 8 porty PoE+ 120 W PoE Budget: 8 × 802.3at/af kompatibilních PoE+ portů s celkovým napájením 120 W. Plně gigabitové porty: 8 × gigabitové porty PoE+ a 8× gigabitové porty bez PoE poskytují vysokorychlostní připojení. Integrováno do Omada SDN: Zero-Touch Provisioning, centralizovaná správa cloudu a inteligentní monitorování. Centralizovaná správa: Přístup ke cloudu a aplikace Omada pro maximální pohodlí a snadnou správu. Robustní bezpečnostní strategie: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication a další. Optimalizujte hlasové a video aplikace: L2/L3/L4 QoS a IGMP snooping. Learn more about TP-Link PoE technology > Learn more about Omada Cloud SDN>? Stránky produktu: https://www.tp-link.com/uk/business-networking/omada-sdn-switch/tl-sg2016p/ Technické specifikace HARDWARE FEATURES Standards and Protocols IEEE 802.3i, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x Interface • 16× 10/100/1000 Mbps RJ45 Ports (Ports 1–8 Support 802.3at/af PoE+) • Auto-Negotiation/Auto MDI/MDIX Network Media • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply • External Power Adapter (Output: 53.5 VDC/ 1.31 A) PoE Ports (RJ45) • Standard: 802.3af/at compliant • PoE Ports: 8 Ports • Power Supply: 120 W* Dimensions ( W x D x H ) 11.3 x 4.4 x 1.0 in (286 x 111.7 x 25.4 mm) Max Power Consumption 146.5 W (110 V/60 Hz) (with 120 W PD connected) Max Heat Dissipation 499.98 BTU/hr (110 V/60 Hz) (with 120 W PD connected) PERFORMANCE Bandwidth/Backplane 16 Gbps MAC Address Table 8k Packet Buffer Memory 4.1 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 802.1p CoS/DSCP priority • 8 priority queues • Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control - Port/Flow-based Rating Limit • Smoother Performance • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control L2 and L2+ Features • DHCP Relay - DHCP VLAN Relay • DHCP L2 Relay • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection • Flow Control - 802.3x Flow Control • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED L2 Multicast • 511 IPv4, IPv6 shared multicast groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - Static Group Config • Multicast VLAN Registration (MVR) • Multicast Filtering • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config • Limited IP Multicast (256 profiles and 16 entries per profile) IPv6 Support • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP VLAN • VLAN Group - Max. 4K VLAN Groups • 802.1Q tag VLAN • MAC VLAN: 12 Entries • Protocol VLAN • GVRP • Voice VLAN Access Control List • Support up to 230 entries • Time-Range - Time Slice - Week Time-Range - Absolute Time-Range - Holiday • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - IP Protocol - TCP Flag - TCP/UDP Source Port - TCP/UDP Destination Port - DSCP/IP TOS • IPv6 ACL • Combined ACL • Rule Operation - Permit/Deny • Policy Action - Mirror - Rate Limit - Redirect - QoS Remark • ACL Rules Binding - Port Binding - VLAN Binding • Actions for flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark Security • AAA • 802.1X - Port-based authentication - MAC (Host) based authentication - Authentication Method includes PAP/EAP-MD5 - MAB - Guest VLAN - Support Radius authentication and accountability • IP/IPv6-MAC Binding - 512 Binding Entries - DHCP Snooping - DHCPv6 Snooping - ARP Inspection - ND Detection • IP Source Guard - 253 Entries - Source IP+Source MAC • IPv6 Source Guard - 183 Entries - Source IPv6 Address+Source MAC • DoS Defend • Static/Dynamic/Permanent Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC-based access control Advanced Features • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule MIBs • MIB II (RFC1213) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIBs • RMON MIB(RFC1757, rmon 1,2,3,9) MANAGEMENT Omada App Yes, through • Omada Cloud-Based Controller • OC300 • OC200 • Omada Software Controller Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Cloud Access Yes, through • Omada Cloud-Based Controller • OC300 • OC200 • Omada Software Controller Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller Management Features • Web-based GUI • Command Line Interface (CLI) through telnet • SNMPv1/v2c/v3 • SNMP Trap/Inform • RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG2016P • Power Adapter • Installation Guide • Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–40 °C (32–104 °F); • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG3428XPP-M2 EAN: 4897098689738 Obecný popis JetStream switch TL-SG3428XPP-M2 nabízí 24 portů s 2.5G PoE++/PoE+ pro WiFi 7/6E/6 a 4 porty 10G SFP+ pro rychlý uplink. Celkový PoE rozpočet je 500 W. Vlastnosti 24× 2,5 Gbps porty 4× 10 Gbps SFP+ sloty 8× 802.3bt/at/af/-kompatibilní PoE++ porty 16× 802.3at/af-kompatibilní PoE+ porty 500 W celkové napájení PoE Integrováno do Omada SDN pro snadnou správu Robustní bezpečnostní strategie včetně IP-MAC-Port Binding, ACL, Port Security a další Technické specifikace Rozhraní 24× 2.5 Gbps RJ45 Ports, 4× 10G SFP+ Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port PoE Ports (RJ45) Standard: 802.3bt/at/af compliant, PoE++ Ports(802.3bt PoE): 8 Ports, up to 60 W per port, PoE+ Ports(802.3at PoE): 16 Ports, up to 30 W per port, Power Budget: 500 W Dimenze 17.3 × 13.0 × 1.7 in (440 × 330 × 44 mm) Výkon Přepínací kapacita 200 Gbps, rychlost předávání paketů 148.80 Mpps Software 8 prioritních front Link Aggregace Spanning Tree Protocol IGMP Snooping VLAN skupina ACL IPv6 DHCP Server Management TP-Link JetStream switch TL-SG3428XPP-M2 je kompatibilní s Omada App, Omada Cloud-Based Controller, Omada Hardware Controller (OC300, OC200), Omada Software Controller. Certifikace CE, FCC, RoHS Obsah balení TL-SG3428XPP-M2 Switch Power Cord Quick Installation Guide Rackmount Kit Rubber Feet Systémové požadavky Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Provozní podmínky Provozní teplota: 0–40 °C (32–104 °F); Skladovací teplota: -40–70 °C (-40–158 °F); Provozní vlhkost: 10–90% RH nekondenzující; Skladovací vlhkost: 5–90% RH nekondenzující. (tonerpartner.cz)

TP-Link OMADA JetStream switch TL-SX3206HPP 6portový řízený switch JetStream 10GE L2+ Bleskurychlé připojení s plnou 10G rychlostí Čtyři 10Gbit/s RJ45 porty a dva 10Gbit/s SFP+ sloty. Napájení PoE++ s výstupním výkonem až 200 W Čtyři 10G RJ45 porty podporující 802.3af/at/bt PoE++ napájení až 60 W na port. Multi-Gigabitové sítě 10G RJ45 porty podporují 5 rychlostí připojení (100M/1G/2,5G/5G/10G) a SFP+ sloty lze osadit 10G i 1G transceivery. Pokročilé L2 a L2+ funkce Podporuje kompletní sadu L2 a L2+ funkcí, jako jsou statický routing, QoS na podnikové úrovni a IGMP Snooping. Robustní bezpečnostní strategie Integrovaná funkce vázání na IP-MAC-Port, ACL, zabezpečením portů, ověřováním 802.1X a dalšími funkcemi. Statický routing Pomáhá směrovat interní provoz pro efektivnější využítí síťových prostředků. Centralizovaná cloudová správa Integrace s platformou Omada SDN pro cloudový přístup a vzdálenou správu. Samostatná správa Web, CLI (konzole port, Telnet, SSH), SNMP, RMON a Dual Image přináší výkonné možnosti správy. Technické specifikace Hardware Features 4× 100/1000/2500/5000/10000 Mbps RJ45 Ports 2× 10G SFP+ Slots 1× RJ45 Console Port 1× Micro-USB Console Port Software Features Quality of Service L2 and L2+ Features L2 Multicast VLAN Access Control List Security IPv6 L3 Features Advanced Features MIBs Management Omada App Centralized Management Cloud Access Zero-Touch Provisioning Management Features Others Certification Package Contents System Requirements Environment (tonerpartner.cz)

TP-Link JetStream switch TL-SG3210XHP-M2 EAN: 6935364030797 Popis Switch TP-Link JetStream TL-SG3210XHP-M2 je vybaven 8 porty 2.5GBASE-T s podporou PoE+ a 2 porty 10GE SFP+. Poskytuje širokou šířku pásma pro přístupové body sítě WiFi 6 a umožňuje přenos dat a napájení po jednom Ethernet kabelu. Switch je navržen pro flexibilní instalaci a různé scénáře nasazení. Porty a připojení 8 portů 2,5 Gbit/s PoE+ 2 sloty SFP+ s rychlostí 10 Gbit/s Podpora celkového rozpočtu napájení 240 W PoE Funkce Integrovaná do platformy Omada SDN Centralizovaná správa přes cloud a aplikaci Omada Statické směrování pro efektivní využití síťových prostředků Robustní strategie zabezpečení včetně funkce vázání na adresu IP-MAC, ACL, zabezpečení portů a další Optimalizace přenosu hlasu a videa v aplikacích pomocí L2/L3/L4 QoS a funkce IGMP Snooping Technické specifikace Interface: 8× 100/1000/2500 Mbps RJ45 Ports, 2× 10G SFP+ Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port Počet ventilátorů: 2 Napájení: 100-240 V AC 50/60 Hz Maximální spotřeba energie: 291.49 W (110V/60Hz) s připojeným 240 W PD Switching kapacita: 80 Gbps MAC Address Table: 16 K Jumbo Frame: 9 KB Softwareové funkce Kvalita služby: 8 prioritních front, 802.1p CoS/DSCP priorita, řízení šířky pásma, hladký výkon L2 a L2+ funkce: Link Aggregation, Spanning Tree Protocol, Loopback detekce, Flow Control, Mirroring Přístupový seznam: Time-based ACL, MAC ACL, IP ACL, Combined ACL, Packet Content ACL, IPv6 ACL Bezpečnost: IP-MAC-Port Binding, IPv6-MAC-Port Binding, DoS Defend, Static/Dynamic Port Security, 802.1X IPv6: IPv6 Dual IPv4/IPv6, Multicast Listener Discovery (MLD) Snooping, IPv6 ACL, Static IPv6 Routing L3 funkce: Statické směrování, Statický ARP, DHCP Server, DHCP Relay Management Web-based GUI Command Line Interface (CLI) přes konzolový port, telnet SNMP v1/v2c/v3 Podpora Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller Automatické objevení zařízení, hromadná konfigurace, hromadný upgrade firmware Ostatní Certifikace: CE, FCC, RoHS Systémové požadavky: Microsoft Windows 98SE, NT, 2000, XP, Vista™ nebo Windows 7/8/10/11, MAC OS, NetWare, UNIX nebo Linux. Provozní teplota: 0–50 °C (32–122 °F) Skladovací teplota: -40–70 °C (-40–158 °F) Provozní vlhkost: 10–90% RH non-condensing Skladovací vlhkost: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG2210P Výkonný 10portový gigabitový switch s 8 porty PoE+ a 2 SFP porty. Technické specifikace Hardwarové funkce TP-Link JetStream switch TL-SG2210P je vybaven 8 10/100/1000Mbps RJ45 porty a 2 1000Mbps SFP sloty. Fanless design zajistí tichý provoz. PoE s rozpočtem napájení 61 W 8 portů PoE+ vyhovujících standardu 802.3af/at s celkovým napájecím výkonem 61 W. Plně gigabitové porty 8 gigabitových portů PoE+ a 2 sloty SFP poskytují vysokorychlostní připojení. Integrace do platformy Omada SDN Switch je plně integrován do platformy Omada SDN a nabízí funkce jako ZTP (Zero-Touch Provisioning), centralizovanou cloudovou správu a inteligentní monitorování. Centralizovaná správa Cloudový přístup a aplikace Omada pro maximální pohodlí a snadnou správu. Robustní strategie zabezpečení Funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius a další funkce. Optimalizované hlasové a video aplikace L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa Webové rozhraní, CLI (Telnet, SSH), SNMP, RMON a funkce Dual Image přináší pokročilé možnosti správy. Ostatní specifikace Switch podporuje standardy IEEE 802.3i, IEEE 802.3u, IEEE 802.3z, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x. Provozní teplota je od 0°C do 40°C, skladovací teplota je od -40°C do 70°C. Provozní vlhkost je od 10% do 90% (ne-kondenzující) a skladovací vlhkost je od 5% do 90% (ne-kondenzující). Obsah balení TL-SG2210P Napájecí adaptér Instalační průvodce Gumičky na nožičky (tonerpartner.cz)

TP-Link JetStream switch TL-SL2428P EAN: 6935364030612 Přehled funkcí 24portový 10/100 Mb/s switch s 4 gigabitovými porty a 24 porty PoE+ Podpora standardů IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p, IEEE 802.3af, IEEE 802.3at Integrované strategie zabezpečení a bohaté funkce správy na 2. vrstvě Dual Firmware Image pro zvýšení spolehlivosti a doby bez výpadků Technické specifikace Hardware Interface: 24 10/100Mbps RJ45 Ports, 4 10/100/1000Mbps RJ45 Ports, 2 Combo Gigabit SFP Slots PoE Budget: 250 W Dimensions: 17.3*7.1*1.7 in.(440*180*44 mm) Max Power Consumption: 18.8 W (220 V / 50 Hz with no PD connected), 286.7 W (220 V / 50 Hz with 250 W PD connected) Performance Switching Capacity: 12.8 Gbps Packet Forwarding Rate: 9.5 Mpps MAC Address Table: 8K Jumbo Frame: 9216 Bytes Software Kvalita služby, funkce L2, podpora IPv6, kontrolní seznamy přístupu, zabezpečení a správa. Balíček obsahuje TL-SL2428P Power Cord Installation Guide Rackmount Kit Rubber Feet Systémové požadavky Microsoft Windows 98SE, NT, 2000, XP, Vista™ nebo Windows 7/8, MAC OS, NetWare, UNIX nebo Linux. Provozní prostředí Operating Temperature: 0°C 50°C (32°F 122°F) Storage Temperature: -40°C 70°C (-40°F 158°F) Operating Humidity: 10% 90% non-condensing Storage Humidity: 5% 90% non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SX3016F 16portový 10GE SFP+ L2+ řízený switch JetStream Bleskurychlá připojení 10G - 16 portů SFP+ s rychlostí 10 Gbit/s poskytuje vysoce propustné širokopásmové připojení a přepínací kapacitu 160 Gbit/s bez blokování. Integrováno do platformy Omada SDN - Funkce ZTP (Zero-Touch Provisioning), centralizovaná cloudová správa a inteligentní monitorování. Centralizovaná správa - Snadná a pohodlná správa přes cloudové rozhraní a aplikaci Omada. Statické směrování - Směruje tok dat po lokální síti, čímž zajišťuje efektivní využívání síťových prostředků. Robustní strategie zabezpečení - Funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius zajistí bezpečnost vašich dat. Optimalizované hlasové a video aplikace - L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa - Webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image přináší pokročilé možnosti správy. Více informací o Omada Cloud SDN>? Více informací o 10G multi-gigabitové technologii TP-Link > Stránky produktu: https://www.tp-link.com/cz/business-networking/managed-switch/tl-sx3016f/ Technické specifikace HARDWARE FEATURES Interface • 16× 10GE SFP+ Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity 1 Power Supply 100-240 V AC 50/60 Hz Dimensions ( W x D x H ) 17.3 × 8.7 × 1.7 in (440 × 220 × 44 mm) Mounting Rack Mountable Max Power Consumption 32.74 W (220 V / 50 Hz) Max Heat Dissipation 111.71 BTU/hr (220 V / 50 Hz) PERFORMANCE Switching Capacity 320 Gbps Packet Forwarding Rate 238.08 Mpps MAC Address Table 32 K Packet Buffer Memory 24 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - static link aggregation - 802.3ad LACP - Up to 8 aggregation groups, containing 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, Root Protect • Loopback Detection - Port based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • MVR • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1Q Tagged VLAN • MAC VLAN: 30 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • Private VLAN • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL -Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - 512 Entries - DHCP Snooping - ARP Inspection - IPv4 Source Guard: 100 Entries • IPv6-MAC-Port Binding - 512 Entries - DHCPv6 Snooping - ND Detection - IPv6 Source Guard: 100 Entries • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • 802.1X - Port base authentication - Mac base authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication andaccountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC based access control IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP - 128 Static Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay - DHCP Interface Relay - DHCP VLAN Relay • DHCP L2 Relay Advanced Features • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule MIBs • MIB II (RFC1213) • Interface MIB (RFC2233) • Ethernet Interface MIB (RFC1643) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • RMON MIB (RFC2819) • RMON2 MIB (RFC2021) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIB MANAGEMENT Omada App Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Cloud Access Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller. Management Features • Web-based GUI • Command Line Interface (CLI) through the console port, telnet • SNMP v1/v2c/v3 - Trap/Inform - RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SX3016F Switch • 2× Power Cords • Quick Installation Guide • Rackmount Kit • Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–45 °C (32–113 °F); • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG2008 Inteligentní gigabitový switch s 8 porty RJ45 pro vysokorychlostní připojení. Pokročilé funkce Integrace do platformy Omada SDN Funkce ZTP (Zero-Touch Provisioning) Centralizovaná cloudová správa a inteligentní monitorování Bezpečnost 802.1Q VLAN, ACL, zabezpečení portů, Storm Control a další Optimalizovaný přenos hlasu a videa v aplikacích: L2/L3/L4 QoS a funkce IGMP Snooping Správa Univerzální správa: řízené režimy WEB/CLI, SNMP a RMON Technické specifikace 8 10/100/1000Mbps RJ45 Ports (Auto-Negotiation/Auto MDI/MDIX) Network Media: UTP category 3, 4, 5 cable (maximum 100m); UTP category 5, 5e or above cable (maximum 100m) Fanless Power Supply: 12 VDC/1 A External Adapter or Obtain Power from PoE Source Dimensions: 8.2 × 4.9 × 1.0 in (209 × 126 × 26 mm) Výkon Bandwidth/Backplane: 16 Gbps Packet Forwarding Rate: 11.9 Mpps MAC Address Table: 8K Packet Buffer Memory: 4.1 Mbit Jumbo Frame: 9 KB Bezpečnostní funkce 802.1X: Port based authentication, MAC (Host) based authentication Authentication Method includes PAP/EAP-MD5 IP/IPv6-MAC Binding: 512 Binding Entries DoS Defend Static/Dynamic/Permanent Port Security: Up to 64 MAC addresses per port Management Centralizovaná správa: Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller Cloud Access: Ano. Vyžaduje použití OC300, OC200, nebo Omada Software Controller. Management Features: Web-based GUI, Command Line Interface (CLI) through telnet, SNMPv1/v2c/v3, SNMP Trap/Inform, RMON (1,2,3,9 groups), SDM Template, DHCP/BOOTP Client, Dual Image, Dual Configuration, CPU Monitoring, Cable Diagnostics, EEE, SNTP, System Log Balení obsahuje TL-SG2008 Power Adapter Installation Guide Rubber Feet Prostředí Operating Temperature: 0°C 40°C (32°F 104°F) Storage Temperature: -40°C 70°C (-40°F 158°F) Operating Humidity: 10% 90% non-condensing Storage Humidity: 5% 90% non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG3210 EAN: 6935364006396 Popis produktu TP-Link JetStream switch TL-SG3210 je 8portový gigabitový L2+ řízený switch s 2 SFP sloty. Poskytuje vysokorychlostní připojení díky svým plně gigabitovým portům. Je integrován do platformy Omada SDN, což umožňuje funkci ZTP (Zero-Touch Provisioning), centralizovanou cloudovou správu a inteligentní monitorování. Centralizovaná správa Switch TL-SG3210 nabízí cloudový přístup a aplikaci Omada pro maximální pohodlí a snadnou správu. Statické směrování Statické směrování pomáhá směrovat tok dat po lokální síti, čímž zajišťuje efektivní využití síťových prostředků. Robustní strategie zabezpečení Switch TL-SG3210 nabízí robustní strategie zabezpečení, včetně funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrany proti útokům DoS, funkce Storm Control, funkce DHCP Snooping a ověřování protokolem 802.1X a Radius. Optimalizovaný přenos hlasu a videa Switch TL-SG3210 je optimalizován pro přenos hlasu a videa v aplikacích díky L2/L3/L4 QoS a funkci IGMP Snooping. Samostatná správa Samostatnou správu umožňuje webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image. Technické specifikace Hardware Interface: 8× 10/100/1000 Mbps RJ45 Ports, 2× Gigabit SFP Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port Fan Quantity: Fanless Power Supply: 100-240 V AC 50/60 Hz Dimensions: 11.6×7.1×1.7 in (294×180×44 mm) Mounting: Rack Mountable / Desktop Max Power Consumption: 6.84 W (220 V/50 Hz) Max Heat Dissipation: 23.33 BTU/h (220 V/50 Hz) Performance Switching Capacity: 20 Gbps Packet Forwarding Rate: 14.89 Mpps MAC Address Table: 8K Jumbo Frame: 9 KB Software Switch TL-SG3210 nabízí širokou škálu softwarových funkcí, včetně Quality of Service, L2 a L2+ Features, L2 Multicast, VLAN, Access Control List, Security, IPv6 a L3 Features. Certifikace Switch TL-SG3210 je certifikován CE, FCC a RoHS. Balení obsahuje TL-SG3210 Switch Power Cord Quick Installation Guide Rackmount Kit Rubber Feet Provozní podmínky Provozní teplota: 0°C–45°C (32°F–113°F); Skladovací teplota: -40°C–70°C (-40°F–158°F); Provozní vlhkost: 10–90% RH non-condensing; Skladovací vlhkost: 5–90% RH non-condensing. (tonerpartner.cz)

TP-Link JetStream switch TL-SX3008F Rychlý, spolehlivý a bezpečný switch pro firemní sítě. Bleskurychlá připojení 10G 8 portů SFP+ s rychlostí 10 Gbit/s a přepínací kapacita 160 Gbit/s bez blokování. Integrováno do platformy Omada SDN Funkce ZTP (Zero-Touch Provisioning), centralizovaná cloudová správa a inteligentní monitorování. Centralizovaná správa Snadná a pohodlná správa přes cloudové rozhraní a aplikaci Omada. Statické směrování Směruje tok dat po lokální síti pro efektivní využití síťových prostředků. Robustní strategie zabezpečení Funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius. Optimalizované hlasové a video aplikace L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa Webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image. Technické specifikace 8× 10GE SFP+ Slots 1× RJ45 Console Port 1× Micro-USB Console Port Fanless Power Supply 100-240 V AC 50/60 Hz Dimensions (WxDxH) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 15.46 W (220 V / 50 Hz) Max Heat Dissipation 52.75 BTU/hr (220 V / 50 Hz) Switching Capacity 160 Gbps Packet Forwarding Rate 119.04 Mpps MAC Address Table 32 K Packet Buffer Memory 16 Mbit Jumbo Frame 9 KB (tonerpartner.cz)

TP-Link JetStream Switch TL-SG3452 Produktové číslo: 6935364010751 Výhody a hlavní funkce 48 gigabitových portů RJ45 a 4 porty SFP Integrace do platformy Omada SDN Centralizovaná cloudová správa Statické směrování pro efektivní využití sítě Robustní zabezpečení včetně vázání na IP-MAC Optimalizovaný přenos hlasu a videa Webové rozhraní pro samostatnou správu Technické specifikace Hardware Porty: 48× 10/100/1000 Mbps RJ45, 4× Gigabit SFP Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port Ventilátor: Bez ventilátoru Napájení: 100-240 V AC 50/60 Hz Rozměry: 17.3×8.7×1.7 in (440×220×44 mm) Montáž: Rack Mountable Spotřeba: 32.8 W (220 V/ 50 Hz) Dissipace tepla: 111.91 BTU/h (220 V / 50 Hz) Výkon Přepínací kapacita: 104 Gbps Rychlost předávání paketů: 77.4 Mpps MAC adresa: 16 K Buffer paměť: 12 Mbit Jumbo Frame: 9 KB Software Kvalita služby 8 prioritních front 802.1p CoS/DSCP priorita Queue scheduling Bandwidth Control Smoother Performance Action for Flows L2 a L2+ funkce Link Aggregation Spanning Tree Protocol Loopback Detection Flow Control Mirroring L2 Multicast Podpora 511 (IPv4, IPv6) IGMP skupin IGMP Snooping IGMP ověřování MVR MLD Snooping VLAN VLAN skupina 802.1q Tagged VLAN MAC VLAN: 12 Entries Protokol VLAN GVRP VLAN VPN (QinQ) Voice VLAN Access Control List Time-based ACL MAC ACL IP ACL Combined ACL Packet Content ACL IPv6 ACL Policy Zabezpečení IP-MAC-Port Binding IPv6-MAC-Port Binding DoS Defend Static/Dynamic Port Security Broadcast/Multicast/Unicast Storm Control IP/Port/MAC based access control 802.1X IPv6 IPv6 Dual IPv4/IPv6 Multicast Listener Discovery (MLD) Snooping IPv6 ACL IPv6 Interface Static IPv6 Routing IPv6 neighbor discovery (ND) Path maximum transmission unit (MTU) discovery Internet Control Message Protocol (ICMP) version 6 TCPv6/UDPv6 IPv6 aplikace L3 funkce 16 IPv4/IPv6 rozhraní Statické směrování Statické ARP 316 ARP Entries Proxy ARP Gratuitous ARP DHCP Server DHCP Relay DHCP L2 Relay Správa Webové GUI Command Line Interface (CLI) přes konzolový port, telnet SNMPv1/v2c/v3 SDM šablona DHCP/BOOTP klient 802.1ab LLDP/LLDP-MED DHCP AutoInstall Dual Image, Dual Configuration CPU Monitoring Diagnostika kabelu EEE Obnovení hesla SNTP System Log Certifikace a systémové požadavky Certifikace: CE, FCC, RoHS Systémové požadavky: Microsoft Windows 98SE, NT, 2000, XP, Vista™ nebo Windows 7/8/10/11, MAC OS, NetWare, UNIX nebo Linux. Provozní teplota: 0–40 °C Skladovací teplota: -40–70 °C Provozní vlhkost: 10–90% RH bez kondenzace Skladovací vlhkost: 5–90% RH bez kondenzace (tonerpartner.cz)

TP-Link OMADA JetStream switch TL-SG3428X Představení produktu TP-Link OMADA JetStream switch TL-SG3428X je řízený switch s vysokou propustností a pokročilými funkcemi. Hlavní výhody 4 sloty SFP+ s rychlostí 10 Gbit/s 24 gigabitových portů RJ45 Integrace do platformy Omada SDN Statické směrování pro efektivní využíví sítě Robustní strategie zabezpečení Optimalizace přenosu hlasu a videa Technické specifikace Hardware: 24× 10/100/1000 Mbps RJ45 Ports 4× 10G SFP+ Slots 1× RJ45 Console Port 1× Micro-USB Console Port Ventilátor: Fanless Napájení: 100-240 V AC 50/60 Hz Rozměry: 17.3 × 7.1 × 1.7 in Možnost montáže do racku Výkon Přepínací kapacita: 128 Gbps Rychlost předávání paketů: 95.23 Mpps Velikost MAC adresáře: 16 K Velikost paketové paměti: 12 Mbit Maximální velikost paketu: 9 KB Software Features Quality of Service L2 and L2+ Features L2 Multicast VLAN Access Control List Security IPv6 L3 Features Management Advanced Features Support Omada Hardware Controller Automatic Device Discovery Batch Configuration Batch Firmware Upgrading Intelligent Network Monitoring Abnormal Event Warnings Unified Configuration Reboot Schedule ZTP (Zero-Touch Provisioning) Management Omada App Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Centralized Management Omada Cloud-Based Controller Omada Hardware Controller (OC300) Omada Hardware Controller (OC200) Omada Software Controller Ostatní Certifikace: CE, FCC, RoHS Požadavky na systém: Microsoft Windows 98SE, NT, 2000, XP, Vista™ nebo Windows 7/8/10/11, MAC OS, NetWare, UNIX nebo Linux. Provozní teplota: 0–45 ? (32–113 ?); Skladovací teplota: -40–70 ? (-40–158 ?) Provozní vlhkost: 10–90% RH non-condensing Skladovací vlhkost: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG3452X EAN: 6935364006471 Obecný popis TP-Link JetStream switch TL-SG3452X je řízený switch L2+ s 48 gigabitovými porty a 4 10GE SFP+ sloty. Výhody produktu 4 sloty SFP+ s rychlostí 10 Gbit/s pro bleskurychlé odchozí připojení 10G. 48 gigabitových portů RJ45 pro vysokorychlostní a spolehlivé spojení. Integrováno do platformy Omada SDN pro snadnou správu a monitorování. Statické směrování pro efektivní využívání síťových prostředků. Robustní strategie zabezpečení včetně IP-MAC vázání, ACL, zabezpečení portů a další. Optimalizovaný přenos hlasu a videa v aplikacích díky L2/L3/L4 QoS a funkci IGMP Snooping. Technické specifikace Interface: 48× 10/100/1000 Mbps RJ45 Ports, 4× 10G SFP+ Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port Power Supply: 100-240 V AC 50/60 Hz Dimensions: 17.3 × 8.7 × 1.7 in (440 × 220 × 44 mm) Mounting: Rack Mountable Max Power Consumption: 32.72 W (110V/60Hz) Max Heat Dissipation: 111.65 BTU/h (110 V/60 Hz) Switching Capacity: 176 Gbps Packet Forwarding Rate: 130.9 Mpps MAC Address Table: 16 K Packet Buffer Memory: 12 Mbit Jumbo Frame: 9 KB Software Features Quality of Service, L2 and L2+ Features, L2 Multicast, VLAN, Access Control List, Security, IPv6, L3 Features, Advanced Features, MIBs Management Omada App, Centralized Management, Cloud Access, Zero-Touch Provisioning, Management Features Certification CE, FCC, RoHS Package Contents TL-SG3452X Switch, Power Cord, Quick Installation Guide, Rackmount Kit, Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment Operating Temperature: 0–45 °C (32–113 °F); Storage Temperature: -40–70 °C (-40–158 °F); Operating Humidity: 10–90% RH non-condensing; Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link OMADA JetStream switch TL-SG2008P Popis JetStream TL-SG2008P je gigabitový smart switch od společnosti TP-Link. Nabízí 8 portů, z nichž 4 jsou vybaveny funkcí PoE+. Kompatibilita a využití Switch je plně kompatibilní se všemi zařízeními PoE, jako jsou IP kamery, přístupové body a IP telefony. Lze jej také použít s kabelovými zařízeními bez PoE pro zajištění gigabitových připojení pro zařízení, jako jsou počítače, tiskárny a IPTV. PoE a rychlost připojení Nabízí 4 porty PoE+ s celkovým napájecím výkonem 62 W a 4 gigabitové porty bez PoE pro vysokorychlostní připojení. Omada SDN a cloudová správa Switch je integrován do platformy Omada SDN, což umožňuje využití funkce Zero-Touch Provisioning, centralizovanou cloudovou správu a inteligentní monitorování. Zabezpečení a přenos dat Switch nabízí robustní strategie zabezpečení a je optimalizován pro přenos hlasu a videa v aplikacích díky funkcím L2/L3/L4 QoS a IGMP Snooping. Technické specifikace Standardy a protokoly: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x Rozhraní: 8× 10/100/1000 Mbps RJ45 Ports (Ports 1–4 Support 802.3at/af PoE+) • Auto-Negotiation/Auto MDI/MDIX Síťová média: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) Ventilátor: Bez ventilátoru Napájení: External Power Adapter (Output: 53.5 VDC/ 1.31 A) Rozměry: 8.2 x 4.9 x 1.0 in (209 x 126 x 26mm) Maximální spotřeba energie: V1: 69.7 W (220 V/50 Hz) (with 62 W PD connected); 7.9 W (220 V/50 Hz) (no PD connected) • V2: 73.8 W (220 V/50 Hz) (with 62 W PD connected) • V3: 77.3 W (110 V/60 Hz) (with 62 W PD connected) Maximální odvod tepla: V1: 237.82 BTU/hr (220 V/50 Hz) (with 62 W PD connected); 26.95 BTU/hr (220 V/50 Hz) (no PD connected) • V2: 251.84 BTU/hr (220 V/50 Hz) (with 62 W PD connected) • V3: 263.6 BTU/hr (110 V/60 Hz) (with 62 W PD connected) Pásmo/Backplane: 16 Gbps MAC Address Table: 8k Packet Buffer Memory: 4.1 Mbit Jumbo Frame: 9 KB Software Vlastnosti QoS: 802.1p CoS/DSCP priority • 8 priority queues • Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control - Port/Flow-based Rating Limit • Smoother Performance • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control Funkce L2 a L2+: DHCP Relay - DHCP VLAN Relay • DHCP L2 Relay • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection • Flow Control - 802.3x Flow Control • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED Podpora IPv6: IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP VLAN: VLAN Group - Max. 4K VLAN Groups • 802.1Q tag VLAN • MAC VLAN • Protocol VLAN • GVRP • Voice VLAN Access Control List: Support up to 230 entries • Time-Range - Time Slice - Week Time-Range - Absolute Time-Range - Holiday • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - IP Protocol - TCP Flag - TCP/UDP Source Port - TCP/UDP Destination Port - DSCP/IP TOS • IPv6 ACL • Combined ACL • Rule Operation - Permit/Deny • Policy Action - Mirror - Rate Limit - Redirect - QoS Remark • ACL Rules Binding - Port Binding - VLAN Binding • Actions for flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark Zabezpečení: AAA • 802.1X - Port-based authentication - MAC (Host) based authentication - Authentication Method includes PAP/EAP-MD5 - MAB - Guest VLAN - Support Radius authentication and accountability • IP/IPv6-MAC Binding - 512 Binding Entries - DHCP Snooping - DHCPv6 Snooping - ARP Inspection - ND Detection • IP Source Guard - 253 Entries - Source IP+Source MAC • IPv6 Source Guard - 183 Entries - Source IPv6 Address+Source MAC • DoS Defend • Static/Dynamic/Permanent Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC-based access control Pokročilé funkce: Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule MIB: MIB II (RFC1213) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIBs • RMON MIB(RFC1757, rmon 1,2,3,9) Správa Omada App: Ano Centralizovaná správa: Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Přístup k cloudu: Ano (přes OC300, OC200, Omada Cloud-Based Controller nebo Omada Software Controller) Zero-Touch Provisioning: Ano. Vyžaduje použití Omada Cloud-Based Controller (podporováno TL-SG2008P v1, v3 a vyšší, zatímco TL-SG2008P v2 to nepodporuje) Funkce správy: Web-based GUI • Command Line Interface (CLI) through telnet • SNMPv1/v2c/v3 • SNMP Trap/Inform • RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • SNTP • System Log Další informace Certifikace: CE, FCC, RoHS Obsah balení: TL-SG2008P • Power Adapter • Installation Guide • Rubber Feet Požadavky na systém: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10, MAC OS, NetWare, UNIX or Linux. Provozní prostředí: Operating Temperature: 0–40 °C (32–104 °F) • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG3428 Úvod TP-Link JetStream switch TL-SG3428 je 24portový gigabitový L2+ řízený switch s 4 SFP sloty. Hardware Switch je vybaven 24 gigabitovými porty RJ45, 4 porty SFP, 1 RJ45 konzolovým portem a 1 Micro-USB konzolovým portem. Je bez ventilátoru a napájení je 100-240 V AC 50/60 Hz. Výkon Switch má přepínací kapacitu 56 Gbps a rychlost předávání paketů 41.66 Mpps. Tabulka MAC adres má kapacitu 8K a podporuje Jumbo Frame 9 KB. Software Switch nabízí kvalitu služeb, L2 a L2+ funkce, L2 Multicast, VLAN, kontrolní seznamy přístupu, zabezpečení, IPv6, L3 funkce a pokročilé funkce. Management Switch je spravován pomocí webového rozhraní, CLI, SNMP, RMON a funkcí Dual Image. Podporuje Omada Hardware Controller (OC200/OC300), Software Controller a Cloud-Based Controller. Obsah balení TL-SG3428 Switch Napájecí kabel Rychlý instalační průvodce Sada pro montáž do racku Gumové nožičky Požadavky na systém Switch je kompatibilní s operačními systémy Microsoft Windows 98SE, NT, 2000, XP, Vista™ nebo Windows 7/8/10/11, MAC OS, NetWare, UNIX nebo Linux. Provozní podmínky Provozní teplota: 0–45 °C (32–113 °F); Skladovací teplota: -40–70 °C (-40–158 °F); Provozní vlhkost: 10–90% RH nekondenzující; Skladovací vlhkost: 5–90% RH nekondenzující. (tonerpartner.cz)

TP-Link TL-SG3428X-M2 JetStream Switch Rychlost 2,5 Gb/s: Porty 24 × 2,5 Gb/s RJ45 nabízejí vysokorychlostní a spolehlivé připojení k dalším přepínačům a zařízením. 10G Lightning-Fast Uplink: 4× 10 Gbps SFP+ sloty umožňují širokopásmové připojení a neblokující přepínací kapacitu. Integrováno do Omada SDN: Zero-Touch Provisioning (ZTP), centralizovaná správa cloudu a inteligentní monitorování. Centralizovaná správa: Přístup ke cloudu a aplikace Omada pro maximální pohodlí a snadnou správu. Static Routing: Pomáhá směrovat interní provoz pro efektivnější využití síťových zdrojů. Robustní bezpečnostní strategie: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication a další. Optimalizujte hlasové a video aplikace: L2/L3/L4 QoS a IGMP snooping. Samostatná správa: Web, CLI (konzolový port, Telnet, SSH), SNMP, RMON a duální obraz přinášejí výkonné možnosti správy Learn more about Omada Cloud SDN>? Learn more about TP-Link 10G Multi-Gig technology > Stránky produktu: https://www.tp-link.com/us/business-networking/omada-sdn-switch/tl-sg3428x-m2/ Technické specifikace HARDWARE FEATURES Interface • 24× 2.5 Gbps RJ45 Ports • 4× 10G SFP+ Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity 1 Power Supply 100-240 V AC 50/60 Hz Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 45.1 W (110V/60Hz) Max Heat Dissipation 154.38 BTU/h (110 V/60 Hz) PERFORMANCE Switching Capacity 200 Gbps Packet Forwarding Rate 148.80 Mpps MAC Address Table 32 K Packet Buffer Memory 16 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - static link aggregation - 802.3ad LACP - Up to 8 aggregation groups, containing 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, Root Protect • Loopback Detection - Port based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • MVR • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1Q Tagged VLAN • MAC VLAN: 256 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL -Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - 512 Entries - DHCP Snooping - ARP Inspection - IPv4 Source Guard: 100 Entries • IPv6-MAC-Port Binding - 512 Entries - DHCPv6 Snooping - ND Detection - IPv6 Source Guard: 100 Entries • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • 802.1X - Port base authentication - Mac base authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication andaccountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC based access control IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 32 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP - 128 Static Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay - DHCP Interface Relay - DHCP VLAN Relay • DHCP L2 Relay Advanced Features • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule MIBs • MIB II (RFC1213) • Interface MIB (RFC2233) • Ethernet Interface MIB (RFC1643) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • RMON MIB (RFC2819) • RMON2 MIB (RFC2021) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIB MANAGEMENT Omada App Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Cloud Access Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller. Management Features • Web-based GUI • Command Line Interface (CLI) through the console port, telnet • SNMP v1/v2c/v3 - Trap/Inform - RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG3428X-M2 Switch • Power Cord • Quick Installation Guide • Rackmount Kit • Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–40 °C (32–104 °F); • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG2428P Produktové číslo: TL-SG2428P EAN: 6935364030650 Vlastnosti produktu Typ zařízení: 28portový gigabitový inteligentní switch Počet portů PoE+: 24 Rozpočet napájení PoE: 250 W Připojení: 24 gigabitových portů PoE+ a 4 sloty SFP Integrace: Platforma Omada SDN ZTP: Funkce Zero-Touch Provisioning Správa: Centralizovaná cloudová správa a inteligentní monitorování Statické směrování: Optimalizace toku dat v lokální síti Zabezpečení Strategie: IP-MAC binding, ACL, zabezpečení portů, ochrana proti DoS útokům, Storm Control, DHCP Snooping, 802.1X a Radius autentizace Optimalizace přenosu Hlas a video: L2/L3/L4 QoS a IGMP Snooping funkce Podpora IPv6: Duální zásobník IPv4/IPv6, MLD Snooping, IPv6 Neighbor Discovery Technické specifikace Rozměry: 17.3 × 8.7 × 1.73 in (440 × 220 × 44 mm) Montáž: Rack Mountable Maximální spotřeba energie: 32.1 W (110 V/ 60 Hz bez připojených PD) / 308.6 W (110 V/ 60 Hz s připojenými PD o výkonu 250 W) Maximální odvod tepla: 109.53 BTU/h (bez připojených PD) / 1052.94 BTU/h (s připojenými PD o výkonu 250 W) Switching kapacita: 56 Gbps Packet Forwarding Rate: 41.7 Mpps MAC Address Table: 8K Software Ovládání: Omada App Centralizovaná správa: Omada Cloud-Based Controller, Omada Hardware Controller (OC300, OC200), Omada Software Controller Cloud Access: Ano Zero-Touch Provisioning: Ano Certifikace Certifikáty: CE, FCC, RoHS Obsah balení TL-SG2428P Síťový kabel Instalační průvodce Rackmount Kit Gumové nožičky Systémové požadavky Operační systémy: Microsoft Windows XP, Vista™, Windows 7, Windows 8, Windows 10, MAC OS, NetWare, UNIX, Linux Provozní podmínky Provozní teplota: 0–50 °C (32–122 °C) Skladovací teplota: -40–70 °C (-40–158 °F) Provozní vlhkost: 10–90% RH nekondenzující Skladovací vlhkost: 5–90% RH nekondenzující (tonerpartner.cz)

TP-Link OMADA JetStream switch TL-SG3428MP EAN produktu: 6935364010737 Popis produktu 28portový gigabitový L2+ řízený switch s 24 porty PoE+ Flexibilní nasazení zařízení podporujících technologii PoE Ideální pro malé firmy hledající snížení nákladů na infrastrukturu Technické specifikace Interface: 24× 10/100/1000Mbps RJ45 Ports, 4× Gigabit SFP Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port PoE Ports (RJ45): Standard: 802.3at/af compliant, PoE+ Ports: 24 Ports, up to 30 W per port, Power Budget: 384 W* Rozměry: 17.3 × 13.0 × 1.7 in (440 × 330 × 44 mm) Montáž: Rack Mountable Výkon Switching Capacity: 56 Gbps Packet Forwarding Rate: 41.66 Mpps MAC Address Table: 8K Packet Buffer Memory: 4.1 Mbit Jumbo Frame: 9 KB Software Features Quality of Service: 8 priority queues, 802.1p CoS/DSCP priority L2 and L2+ Features: Link Aggregation, Spanning Tree Protocol, Loopback Detection, Flow Control, Mirroring L2 Multicast: Supports 511 (IPv4, IPv6) IGMP groups VLAN: VLAN Group - Max 4K VLAN Groups, 802.1Q Tagged VLAN Access Control List: Time-based ACL, MAC ACL, IP ACL, Combined ACL, Packet Content ACL, IPv6 ACL Management Omada App: Yes Centralized Management: Omada Cloud-Based Controller, Omada Hardware Controller (OC300), Omada Hardware Controller (OC200), Omada Software Controller Cloud Access: Yes Zero-Touch Provisioning: Yes Management Features: Web-based GUI, Command Line Interface (CLI) through console port, telnet, SNMPv1/v2c/v3 Certifikace CE, FCC, RoHS Obsah balení TL-SG3428MP Switch Power Cord Quick Installation Guide Rackmount Kit Rubber Feet Systémové požadavky Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Provozní prostředí Operating Temperature: 0–45 °C (32–113 °F) Storage Temperature: -40–70 °C (-40–158 °F) Operating Humidity: 10–90% RH non-condensing Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link switch TL-SG3452P Popis produktu 52portový gigabitový L2+ řízený switch JetStream se 48 porty PoE+ Switch nabízí 48 gigabitových portů RJ45 a 4 porty SFP pro vysokorychlostní připojení. Disponuje také 48 porty PoE+ odpovídajících standardu 802.3at/af s celkovým výkonem 384 W. Integrace do Omada SDN Nabízí funkce ZTP (Zero-Touch Provisioning), centralizovaná cloudová správa a inteligentní monitorování. Centralizovaná správa Cloudový přístup a aplikace Omada pro maximální pohodlí a snadnou správu. Statické směrování Pomáhá směrovat tok dat po lokální síti, zajišťuje efektivní využití síťových prostředků. Robustní strategie zabezpečení IP-MAC vázání ACL Zabezpečení portů Ochrana proti útokům DoS Storm Control DHCP Snooping Ověřování protokolem 802.1X a Radius Optimalizovaný přenos hlasu a videa L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa Webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image přináší pokročilé možnosti správy. Technické specifikace Hardware 48× 10/100/1000 Mbps RJ45 Ports 4× Gigabit SFP Slots 1× RJ45 Console Port 1× Micro-USB Console Port 3 ventilátory Napájení: 100-240 V AC 50/60 Hz 48 PoE+ Ports s výkonem až 30 W na port Maximální spotřeba energie: 52.53 W (bez PD připojení), 485.4 W (s 384 W PD připojení) Rozměry: 17.3 × 13.0 × 1.7 in (440 × 330 × 44 mm) Výkon Přepínací kapacita: 104 Gbps Rychlost předávání paketů: 77.4 Mpps MAC Address Table: 16 K Packet Buffer Memory: 12 Mbit Jumbo Frame: 9 KB Software Podporuje 8 prioritních front, 802.1p CoS/DSCP prioritu, linkovou agregaci, Spanning Tree Protocol, Flow Control, Mirroring a mnoho dalších. Certifikace CE, FCC, RoHS Obsah balení TL-SG3452P Switch Napájecí kabel Rychlý průvodce instalací Sada pro montáž do racku Gumové nožičky Požadavky na systém Microsoft Windows 98SE, NT, 2000, XP, Vista™ nebo Windows 7/8/10/11, MAC OS, NetWare, UNIX nebo Linux. Provozní podmínky Provozní teplota: 0–40 °C (32–104 °F); Skladovací teplota: -40–70 °C (-40–158 °F); Provozní vlhkost: 10–90% RH bez kondenzace; Skladovací vlhkost: 5–90% RH bez kondenzace. (tonerpartner.cz)

TP-Link JetStream TL-SG3452XP EAN: 6935364006495 Síťový switch TP-Link JetStream TL-SG3452XP nabízí 48 gigabitových portů a 4 sloty SFP+ pro rychlé a efektivní připojení. 10G připojení Čtyři sloty SFP+ s rychlostí 10 Gbit/s umožňují vysoce propustné širokopásmové připojení. PoE+ napájení 48 gigabitových portů podporuje standardy 802.3af/at a PoE+ napájení s výstupním výkonem 500 W. Cloudová správa Integrace s platformou Omada SDN umožňuje cloudový přístup a vzdálenou správu. Funkce L2 a L2+ Switch podporuje kompletní sadu L2 a L2+ funkcí včetně statického směrování, QoS na podnikové úrovni a IGMP Snooping. Bezpečnostní strategie Integrované funkce jako vázání na IP-MAC-Port, ACL, zabezpečení portů a ověřování 802.1X zajišťují robustní bezpečnost. Samostatná správa Webové rozhraní, CLI, SNMP, RMON a Dual Image přináší komplexní možnosti správy. Technické specifikace Interface: 48× 10/100/1000 Mbps RJ45 PoE+ Ports, 4× 10G SFP+ Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port Fan Quantity: 3 Power Supply: 100-240 V AC 50/60 Hz Dimensions: 17.3 × 13.0 × 1.7 in (440 × 330 × 44 mm) Mounting: Rack Mountable Pro více informací navštivte stránky produktu: https://www.tp-link.com/cz/business-networking/omada-sdn-switch/tl-sg3452xp/ (tonerpartner.cz)

TP-Link JetStream switch TL-SG3428XMP Kód produktu: 6935364030773 Vlastnosti produktu Switch TP-Link JetStream TL-SG3428XMP je řízený L2+ switch s 24 gigabitovými porty a 4 10GE SFP+ sloty. Navíc je vybaven napájením PoE+ na všech 24 portech. Flexibilní nasazení a snížení nákladů Switch umožňuje přenos dat i elektrického napájení přes jeden ethernetový kabel. To umožňuje flexibilní nasazení zařízení podporujících technologii PoE, jako jsou bezdrátové přístupové body, IP kamery nebo IP telefony. Tímto způsobem můžete snížit náklady na infrastrukturu. Vysoká rychlost a kapacita 4 sloty SFP+ s rychlostí 10 Gbit/s umožňují vysoce propustné širokopásmové připojení a přepínací kapacitu bez blokování. 24 PoE+ portů odpovídajících standardu 802.3at/af disponují celkovým výkonem 384 W. Integrace s platformou Omada SDN Funkce ZTP (Zero-Touch Provisioning), centralizovaná cloudová správa a inteligentní monitorování jsou integrovány do platformy Omada SDN. Centralizovaná správa Pro maximální pohodlí a snadnou správu je k dispozici cloudový přístup a aplikace Omada. Statické směrování Statické směrování pomáhá směrovat tok dat po lokální síti, čímž zajišťuje efektivní využívání síťových prostředků. Robustní strategie zabezpečení Switch je vybaven robustními funkcemi zabezpečení, včetně funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius a další. Optimalizovaný přenos hlasu a videa Switch je optimalizován pro přenos hlasu a videa v aplikacích díky funkcím L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa Webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image přináší pokročilé možnosti správy. Technické specifikace Interface: 24× 10/100/1000 Mbps RJ45 Ports, 4× 10G SFP+ Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port Fan Quantity: 2 Power Supply: 100-240 V AC 50/60 Hz PoE+ Ports(RJ45): Standard: 802.3at/af compliant, PoE+ Ports: 24 Ports, up to 30 W per port, Power Budget: 384 W Dimensions ( W x D x H ): 17.3 × 13.0 × 1.7 in (440 × 330 × 44 mm) Mounting: Rack Mountable Max Power Consumption: 34.4 W (110V/60Hz) ( no PD device connected), 465.8 W (110V/60Hz) ( with 384 W PD device connected) Max Heat Dissipation: 117.38 BTU/h (110 V/60 Hz) (no PD device connected), 1589.31 BTU/h (110 V/60 Hz) (with 384 W PD device connected) (tonerpartner.cz)

TP-Link TL-SG3428XF JetStream 24-Port SFP L2+ Managed Switch se 4 10GE SFP+ Sloty Bleskurychlé odchozí připojení 10G - 4 sloty SFP+ s rychlostí 10 Gbit/s umožňují vysoce propustné širokopásmové připojení a přepínací kapacitu bez blokování. Gigabitové rychlosti - 20 gigabitových portů SFP a 4 gigabitové kombinované porty SFP/RJ45 nabízí vysokorychlostní a spolehlivé spojení s dalšími switchi a zařízeními. Integrováno do platformy Omada SDN - Funkce ZTP (Zero-Touch Provisioning), centralizovaná cloudová správa a inteligentní monitorování. Centralizovaná správa - Cloudový přístup a aplikace Omada pro maximální pohodlí a snadnou správu. Statické směrování - Pomáhá směrovat tok dat po lokální síti, čímž zajišťuje efektivní využívání síťových prostředků. Robustní strategie zabezpečení - Funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius a další funkce. Optimalizovaný přenos hlasu a videa v aplikacích - L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa - Webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image přináší pokročilé možnosti správy. Stránky produktu: https://www.tp-link.com/cz/business-networking/managed-switch/tl-sg3428xf/ Technické specifikace HARDWARE FEATURES Interface • 20× Gigabit SFP Ports• 4× Gigabit SFP/RJ45 Combo Ports• 4× 10G SFP+ Slots• 1× RJ45 Console Port• 1× Micro-USB Console Port Fan Quantity 1 Fan Power Supply Dual Reduant Power Supplies100-240 V AC 50/60 Hz Dimensions (WxDxH) 17.3 × 8.7 × 1.7 in (440 × 220 × 44 mm) Mounting Rack Mountable Max Power Consumption 35.7 W (110 V/60 Hz) Max Heat Dissipation 121.81 BTU/hr (110 V/60 Hz) PERFORMANCE Switching Capacity 128 Gbps Packet Forwarding Rate 95.23 Mpps MAC Address Table 16 K Packet Buffer Memory 12 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues• 802.1p CoS/DSCP priority• Queue scheduling- SP (Strict Priority)- WRR (Weighted Round Robin)- SP+WRR• Bandwidth Control- Port/Flow based Rating Limiting• Smoother Performance• Action for Flows- Mirror (to supported interface)- Redirect (to supported interface)- Rate Limit- QoS Remark L2 and L2+ Features • Link Aggregation- static link aggregation- 802.3ad LACP- Up to 8 aggregation groups, containing 8 ports per group• Spanning Tree Protocol- 802.1d STP- 802.1w RSTP- 802.1s MSTP- STP Security: TC Protect, BPDU Filter, Root Protect• Loopback Detection- Port based- VLAN based• Flow Control- 802.3x Flow Control- HOL Blocking Prevention• Mirroring- Port Mirroring- CPU Mirroring- One-to-One- Many-to-One- Tx/Rx/Both L2 Multicast • IGMP Snooping- IGMP v1/v2/v3 Snooping- Fast Leave- IGMP Snooping Querier- IGMP Authentication• IGMP Authentication• MLD Snooping- MLD v1/v2 Snooping- Fast Leave- MLD Snooping Querier- Static Group Config- Limited IP Multicast• MVR• Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group- Max 4K VLAN Groups• 802.1Q Tagged VLAN• MAC VLAN: 30 Entries• Protocol VLAN: Protocol Template 16, Protocol VLAN 16• Private VLAN• GVRP• VLAN VPN (QinQ)- Port-Based QinQ- Selective QinQ• Voice VLAN Access Control List • Time-based ACL• MAC ACL- Source MAC- Destination MAC- VLAN ID- User Priority- Ether Type• IP ACL-Source IP- Destination IP- Fragment- IP Protocol- TCP Flag- TCP/UDP Port- DSCP/IP TOS- User Priority• Combined ACL• Packet Content ACL• IPv6 ACL• Policy- Mirroring- Redirect- Rate Limit- QoS Remark• ACL apply to Port/VLAN Security • IP-MAC-Port Binding- 512 Entries- DHCP Snooping- ARP Inspection- IPv4 Source Guard: 100 Entries• IPv6-MAC-Port Binding- 512 Entries- DHCPv6 Snooping- ND Detection- IPv6 Source Guard: 100 Entries• DoS Defend• Static/Dynamic Port Security- Up to 64 MAC addresses per port• Broadcast/Multicast/Unicast Storm Control- kbps/ratio control mode• 802.1X- Port base authentication- Mac base authentication- VLAN Assignment- MAB- Guest VLAN- Support Radius authentication andaccountability• AAA (including TACACS+)• Port Isolation• Secure web management through HTTPS with SSLv3/TLS 1.2• Secure Command Line Interface (CLI) management with SSHv1/SSHv2• IP/Port/MAC based access control IPv6 • IPv6 Dual IPv4/IPv6• Multicast Listener Discovery (MLD) Snooping• IPv6 ACL• IPv6 Interface• Static IPv6 Routing• IPv6 neighbor discovery (ND)• Path maximum transmission unit (MTU) discovery• Internet Control Message Protocol (ICMP) version 6• TCPv6/UDPv6• IPv6 applications- DHCPv6 Client- Ping6- Tracert6- Telnet (v6)- IPv6 SNMP- IPv6 SSH- IPv6 SSL- Http/Https- IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces• Static Routing- 48 static routes• Static ARP- 128 Static Entries• Proxy ARP• Gratuitous ARP• DHCP Server• DHCP Relay- DHCP Interface Relay- DHCP VLAN Relay• DHCP L2 Relay Advanced Features • Automatic Device Discovery• Batch Configuration• Batch Firmware Upgrading• Intelligent Network Monitoring• Abnormal Event Warnings• Unified Configuration• Reboot Schedule MIBs • MIB II (RFC1213)• Interface MIB (RFC2233)• Ethernet Interface MIB (RFC1643)• Bridge MIB (RFC1493)• P/Q-Bridge MIB (RFC2674)• RMON MIB (RFC2819)• RMON2 MIB (RFC2021)• Radius Accounting Client MIB (RFC2620)• Radius Authentication Client MIB (RFC2618)• Remote Ping, Traceroute MIB (RFC2925)• Support TP-Link private MIB MANAGEMENT Omada App Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Centralized Management • Omada Cloud-Based Controller• Omada Hardware Controller (OC300)• Omada Hardware Controller (OC200)• Omada Software Controlle Cloud Access Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller. Management Features • Web-based GUI• Command Line Interface (CLI) through the console port, telnet• SNMP v1/v2c/v3- Trap/Inform- RMON (1,2,3,9 groups)• SDM Template• DHCP/BOOTP Client• 802.1ab LLDP/LLDP-MED• DHCP AutoInstall• Dual Image, Dual Configuration• CPU Monitoring• Cable Diagnostics• EEE• Password Recovery• SNTP• System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG3428XF Switch• Power Cord• Quick Installation Guide• Rackmount Kit• Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–45 ? (32–113 ?);• Storage Temperature: -40–70 ? (-40–158 ?)• Operating Humidity: 10–90% RH non-condensing• Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link Easy Smart switch TL-SG1218MPE EAN: 6935364086923 Obecný popis 18portový gigabitový Easy Smart switch se 16 porty PoE+. Vyhovuje standardu 802.3af/at PoE+. Podporuje až 30 W na každém portu PoE. Celkový rozpočet napájení 250 W PoE pro 16 gigabitových portů PoE+. Plně kompatibilní s IP kamerami, přístupovými body, IP telefony, počítači, tiskárnami a dalšími zařízeními. Porty a napájení 16 gigabitových portů RJ45 PoE+. 2 gigabitové porty RJ45 bez PoE. 2 kombinované gigabitové SFP sloty. Rozpočet napájení PoE je až 250 W. Ideální volbou pro dohledové systémy v malých a středně velkých firmách. Další funkce Prioritní port pro kvalitní provoz citlivých aplikací. Funkce automatického obnovení PoE. Inteligentní řízení spotřeby. QoS pro plynulý chod aplikací citlivých na prodlevy. IGMP Snooping pro optimalizaci datových přenosů multimediálních aplikací. Technické specifikace Standards and Protocols: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1q, IEEE 802.1p Interface: 16× 10/100/1000 Mbps PoE+ RJ45 Ports, 2× 10/100/1000 Mbps non-PoE RJ45 Ports, 2× Combo Gigabit SFP Ports Fan Quantity: 2 Fans Physical Security Lock: Yes Power Supply: 100–240V AC, 50/60 Hz Dimensions: 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting: Rack Mountable Max Power Consumption: 21.4 W (220/50Hz. no PD connected), 296.3 W (220/50Hz. with 250 W PD connected) Max Heat Dissipation: 72.97 BTU/h (no PD connected), 1010.38 BTU/h (with 250 W PD connected) Switching Capacity: 36 Gbps Packet Forwarding Rate: 26.78 Mbps MAC Address Table: 8K Packet Buffer Memory: 4.1 Mbit Jumbo Frame: 10 KB (tonerpartner.cz)

TP-Link TL-SG3428X-UPS: Přehled Switch TL-SG3428X-UPS je vybaven 24 gigabitovými porty a 4 sloty 10GE SFP+. Přináší podporu pro centrální správu cloudu a softwarový kontroler. Poskytuje možnost UPS napájení pro zajištění provozu i při výpadku primárního zdroje. Klíčové vlastnosti 4× 10 Gbps SFP+ sloty pro širokopásmové připojení. 24× gigabitové porty RJ45 pro vysokorychlostní připojení. Static routing pro efektivnější využití síťových zdrojů. Robustní bezpečnostní strategie včetně IP-MAC-Port Binding, ACL, Port Security, DoS Defend a další. Optimalizace hlasových a video aplikací pomocí L2/L3/L4 QoS a IGMP snooping. Samostatná správa přes Web, CLI, SNMP, RMON a duální obraz. Technické specifikace Hardware Features: 24× 10/100/1000 Mbps RJ45 Ports, 4× 10G SFP+ Slots, 1× RJ45 Console Port, 1× Micro-USB Console Port Fanless design Power Supply: 100-240 V AC 50/60 Hz and 12 V lead-acid battery Dimensions: 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting: Rack Mountable Performance: Switching Capacity: 128 Gbps Packet Forwarding Rate: 95.23 Mpps MAC Address Table: 16 K Packet Buffer Memory: 12 Mbit Jumbo Frame: 9 KB Software Features: Quality of Service: 8 priority queues, 802.1p CoS/DSCP priority, Queue scheduling, Bandwidth Control, Action for Flows L2 and L2+ Features: Link Aggregation, Spanning Tree Protocol, Loopback Detection, Flow Control, Mirroring L2 Multicast: IGMP Snooping, MLD Snooping, MVR, Multicast Filtering VLAN: VLAN Group, 802.1Q Tagged VLAN, MAC VLAN, Protocol VLAN, Private VLAN, GVRP, VLAN VPN (QinQ), Voice VLAN Access Control List: Time-based ACL, MAC ACL, IP ACL, Combined ACL, Packet Content ACL, IPv6 ACL, Policy Security: IP-MAC-Port Binding, IPv6-MAC-Port Binding, DoS Defend, Static/Dynamic Port Security, 802.1X, AAA (including TACACS+), Port Isolation, Secure web management, Secure Command Line Interface (CLI) management IPv6: IPv6 Dual IPv4/IPv6, Multicast Listener Discovery (MLD) Snooping, IPv6 ACL, IPv6 Interface, Static IPv6 Routing, IPv6 neighbor discovery (ND), Path maximum transmission unit (MTU) discovery, Internet Control Message Protocol (ICMP) version 6, TCPv6/UDPv6, IPv6 applications L3 Features: 16 IPv4/IPv6 Interfaces, Static Routing, Static ARP, Proxy ARP, Gratuitous ARP, DHCP Server, DHCP Relay, DHCP L2 Relay Advanced Features: Automatic Device Discovery, Batch Configuration, Batch Firmware Upgrading, Intelligent Network Monitoring, Abnormal Event Warnings, Unified Configuration, Reboot Schedule Management Features: Web-based GUI, Command Line Interface (CLI), SNMP v1/v2c/v3, SDM Template, DHCP/BOOTP Client, 802.1ab LLDP/LLDP-MED, DHCP AutoInstall, Dual Image, Dual Configuration, CPU Monitoring, Cable Diagnostics, EEE, Password Recovery, SNTP, System Log Package Contents: TL-SG3428X-UPS Switch, Power Cord, Quick Installation Guide, Rackmount Kit, Rubber Feet System Requirements: Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment: Operating Temperature: 0–45 °C (32–113 °F); Storage Temperature: -40–70 °C (-40–158 °F); Operating Humidity: 10–90% RH non-condensing; Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link TL-SG116P: 16-Portový Gigabitový Switch s PoE EAN: 4895252500301 Přehled 16 × 802.3af/at-kompatibilní PoE+ porty. Vysokorychlostní připojení s 16 x gigabitovými PoE+ RJ45 porty. Dosah a priorita Přenos dat a energie až na vzdálenost 250 m v režimu Extend. Prioritní režim pro porty 1–4. Režim izolace a PoE Auto Recovery Možnost oddělit klientský provoz jedním kliknutím. Automatizovaný restart zařízení s napájením PoE. Plug and Play Žádná nutnost konfigurace. Technické specifikace 16× 10/100/1000Mbps RJ45 Ports Fanless External Power Adapter (Output: 53.5 VDC / 2.43 A) Packet Forwarding Rate: 23.8 Mpps PoE Ports: Ports 1–16 Power Supply: 120 W Mac Address Table: 8K, Auto-learning, Auto-aging Switching Capacity: 32 Gbps Dimensions: 11.3 × 4.4 × 1.0 in Software Features Compatible With IEEE 802.3af/at Compliant PDs Extend Mode Button (Ports 1–4, Up to 250 m PoE power supply and data transmission) Priority Mode Button (Ports 1–4) Isolation Mode Button (Ports 1–7 / 8-14) PoE Auto Recovery (Ports 1-16) Mac Address Auto-Learning And Auto-Aging IEEE 802.3x Flow Control 802.1p/DSCP QoS IGMP Snooping Environment Operating Temperature: 0–40 °C Storage Temperature: -40–70 °C Operating Humidity: 10–90% RH non-condensing Storage Humidity: 5–90% RH non-condensing Certification FCC, CE, RoHS Package Contents TL-SG116P Power Adapter Installation Guide (tonerpartner.cz)

TP-Link switch TL-SG1016PE 16-portový gigabitový Easy Smart switch s podporou PoE+ na 8 portech. Funkce a výhody Switch TL-SG1016PE je ideální pro rozšíření kabelové sítě. Přenáší napájení a data přes jediný ethernetový kabel. S celkovou kapacitou napájení 110 W, může switch napájet více zařízení s vysokým výkonem. Podpora PoE+ 8 portů podporuje PoE+ pro přenos dat a napájení přes jeden kabel. Toto usnadňuje připojení zařízení jako jsou bezdrátové přístupové body (AP), IP kamery nebo IP telefony. Snadná instalace a nastavení Připojení ve stylu „plug-and-play“ a snadné nastavení sítě umožňuje rychlou a efektivní konfiguraci. Technické specifikace Interface: 16 10/100/1000Mbps RJ45 Ports Network Media: UTP category 3, 4, 5 cable (maximum 100m) Fan Quantity: 1 Power Supply: 100-240VAC, 50/60Hz PoE Ports: Port 1- Port 8 PoE Power Budget: 110W Dimensions: 11.6*7.1*1.7 in. (294*180*44 mm) Energeticky efektivní Switch TL-SG1016PE dokáže ušetřit až 75% spotřeby energie. To představuje ekologické řešení pro vaši firemní síť. (tonerpartner.cz)

TP-Link CCTV switch TL-SL1218P EAN: 6935364052829 Popis produktu TP-Link switch TL-SL1218P je vybaven 16 porty RJ45 PoE + 10/100Mb/s, 2 gigabitovými porty RJ45 a 1 kombinovaným gigabitovým SFP slotem. Výkon PoE napájení Switch nabízí vysoký výkon PoE napájení, až 30 W pro každý PoE port a 150 W pro všechny PoE porty. Přenos dat a napájení Přenos dat a napájení až do vzdálenosti 250 m v režimu prodloužení, speciálně navrženého pro dohledový systém. Prioritní režim Prioritní režim pro porty 1-8 zaručuje kvalitu citlivých aplikací, jako je například video monitor. Režim izolace Režim izolace umožňuje oddělení provozu klienta jedním kliknutím pro vyšší zabezpečení a výkon. Snadné použití Switch je snadno použitelný, bez nutnosti konfigurace a instalace. Technické specifikace Interface: 16× PoE+ 10/100 Mbps RJ45 Ports, 2× 10/100/1000 Mbps RJ45 Ports, 1× Combo Gigabit SFP Slot Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100Ohm STP (maximum 100m), 100BASE-TX: UTP category 5, 5e cable (maximum 100m), EIA/TIA-568 100Ohm (maximum 100m), 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m), EIA/TIA-568 100Ohm (maximum 100m), 1000BASE-X MMF, SMF Fan Quantity: 2 Fans Physical Security Lock: Yes Power Supply: 100–240V AC, 50/60 Hz PoE+ Ports(RJ45): Standard: 802.3at/802.3af compliant, PoE Ports: Ports 1–16, PoE Power Budget: 150 W Dimensions ( W x D x H ): 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Max Power Consumption: 12.71 W (220/50Hz. no PD connected), 172.8 W (220/50Hz. with 150 W PD connected) Max Heat Dissipation: 43.34 BTU/h (no PD connected), 589.25 BTU/h (with 150 W PD connected) Switching Capacity: 7.2 Gbps Packet Forwarding Rate: 5.36 Mpps MAC Address Table: 8K Jumbo Frame: 10 KB Advanced Features: Compatible With IEEE 802.3at/af Compliant PDs, Extend Mode (Up to 250m PoE power supply and data transmission), Priority Mode, Isolation Mode, Mac Address Auto-Learning And Auto-Aging, IEEE802.3x Flow Control Transmission Method: Store-And-Forward Ostatní Certification: CE, FCC, RoHS Package Contents: TL-SL1218P, Power Cable, Installation Guide, Two mounting brackets and the fittings Environment: Operating Temperature: 0–50 °C (32–122 °F), Storage Temperature: -40–70 °C (-40–158 °F), Operating Humidity: 10–90% RH non-condensing, Storage Humidity: 5–90% RH non-condensing (tonerpartner.cz)

TP-Link switch TL-SL1218MP Produktový kód: 6935364099824 Přehled funkcí TP-Link switch TL-SL1218MP je 16portový 10/100 Mb/s + 2portový gigabitový switch do racku s 16 porty PoE+. Vyhovuje standardu 802.3af/at PoE+, který podporuje až 30 W na každém portu PoE. Celkový rozpočet napájení 250 W PoE* pro 16 portů PoE+ umožňuje široké možnosti využití. Je plně kompatibilní s IP kamerami, přístupovými body, IP telefony, počítači, tiskárnami a dalšími zařízeními. Specifikace 16 portů RJ45 PoE + 10/100Mb/s 2 gigabitové porty RJ45 2 kombinované gigabitové SFP sloty Přenos dat a napájení až do vzdálenosti 250 m Prioritní režim pro port 1-8 Vysoký výkon PoE napájení, až 30 W pro každý PoE port a 192 W pro všechny PoE porty Snadné použití bez nutnosti konfigurace a instalace Technické parametry Interface: 16 PoE+ 10/100 Mbps RJ45 Ports, 2× 10/100/1000 Mbps RJ45 Ports, 2× Combo Gigabit SFP Slots Network Media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m), EIA/TIA-568 100Ohm STP (maximum 100m) Fan Quantity: 2 Fans Power Supply: 100–240V AC, 50/60 Hz PoE+ Ports(RJ45): Standard: 802.3at/802.3af compliant, PoE Ports: Ports 1–16, PoE Power Budget: 250 W Dimensions ( W x D x H ): 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Pro více informací navštivte stránky produktu. (tonerpartner.cz)

Cisco CBS250-16P-2G Spolehlivý a cenově dostupný switch pro malé podniky. Vlastnosti produktu Switch nabízí vysoký výkon a spolehlivost v kombinaci s širokou škálou síťových funkcí. Počet portů: 18 Provedení: Rack-mount Porty: 16 x GbE RJ45, 2 x SFP, PoE+ Výkon: Switching capacity: 36.0 Gbps, Forwarding performance (64-byte packet size): 26.78 Mpps Výhody Cisco Business 250 Series Možnost 8 až 48 portů Gigabit Ethernet, GE nebo 10-GE uplink a podpora PoE+ Plug-and-play s hlasovým, bezdrátovými, datovými, video a připojenými síťovými zařízeními Další optické připojení pro vyšší šířku pásma pro uplink a rozšířené možnosti pro napájení přes PoE Integrované zabezpečení chránící Vaše obchodní data před neoprávněným přístupem Technické specifikace VLAN: Ano Protokol pro vzdálenou správu: SNMP, RMON, HTTP, HTTPS, TFTP, Telnet, SSH Standardy: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3z, IEEE 802.3x, IEEE 802.3 ad LACP, IEEE 802.1D, IEEE 802.1Q/p VLAN, IEEE 802.1w, IEEE 802.1s, IEEE 802.1X, IEEE 802.3af, IEEE 802.3at Velikost MAC tabulky: 8 000 RAM: 512 MB Flash: 256 MB Napájení: 100-240 V (50-60 Hz), interní Rozměry (Š x V x H): 268 x 297 x 44 mm Hmotnost: 2.38 kg Provozní teplota: -5 až 50°C Provozní vlhost: 10 - 90% Skladovací teplota: -25 až 70 °C (tonerpartner.cz)

Cisco switch CBS350-16P-2G-EU Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci. Stránky produktu: CBS350-16P-2G-EU Quick start guide: Quick start guide Switching capacity and forwarding rate (All switches are wire speed and nonblocking)Capacity in Millions of Packets per Second (mpps) (64-byte packets) 26,78 Switching Capacity in Gigabits per Second (Gbps) 36 Layer 2 switchingSpanning Tree Protocol (STP) Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4,094 VLANs simultaneously Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication CPE VLAN Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported) IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols. Head-of-Line (HOL) blocking HOL blocking prevention Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3IPv4 routing Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wirespeed routing of IPv6 packets Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for classless interdomain routing RIP v2 Support for Routing Information Protocol version 2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Securityecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers. IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing. Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks. IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability Secure Core Technology (SCT) Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user. Trustworthy systems Trustworthy systems provide a highly secure foundation for Cisco products Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC]) Private VLAN Private VLAN provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic; supports multiple uplinks Layer 2 isolation Private VLAN Edge (PVE) PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks Port security Ability to lock source MAC addresses to ports and limits the number of learned MAC addresses RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session Storm control Broadcast, multicast, and unknown unicast DoS prevention Denial-of-Service (DOS) attack prevention Multiple user privilege levels in CLI Level 1, 7, and 15 privilege levels ACLs Support for up to 1,024 rules Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol/User Datagram Protocol (TCP/UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported Quality of ServicePriority levels 8 hardware queues Scheduling Strict priority and Weighted Round-Robin (WRR) Class of service Port based; 802.1p VLAN priority-based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP-based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS Queue assignment based on DSCP and class of service (802.1p/CoS) Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization iSCSI traffic optimization A mechanism for giving priority to iSCSI traffic over other types of traffic Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbit/s Ethernet over fiber for LAN, IEEE 802.3an 10GBase-T 10 Gbit/s Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 826, RFC 879, RFC 896, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3176, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330 IPv6IPv6 IPv6 host mode; IPv6 over Ethernet; Dual IPv6/IPv4 stack IPv6 neighbor and router discovery (ND); IPv6 stateless address autoconfiguration; Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD); ICMP version 6 DHCPv6 stateful client IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) tunnel support USGv6 and IPv6 Gold Logo certified IPv6 QoS Prioritize IPv6 packets in hardware IPv6 ACL Drop or rate limit IPv6 packets in hardware IPv6 First Hop Security RA guard ND inspection DHCPv6 guard Neighbor binding table (snooping and static entries) Neighbor binding integrity check Multicast Listener Discovery (MLD v1/2) snooping Deliver IPv6 multicast packets only to the required receivers MLD proxy The MLD proxy provides a mechanism for multicast forwarding based on MLD membership information without the need for more complicated multicast routing protocols. IPv6 applications Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, Domain Name System (DNS) client, Telnet Client, DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, Terminal Access Controller Access Control System Plus (TACACS+) IPv6 RFCs supported RFC 4443 (which obsoletes RFC2463): ICMP version 6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address autoconfiguration RFC 1981: path MTU discovery RFC 4007: IPv6 scoped address architecture RFC 3484: default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: MIB IPv6: textual conventions and general group RFC 3595: textual conventions for IPv6 flow label ManagementCisco Business Dashboard Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site. Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips. Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience Supports Cisco PnP Connect Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM) Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration Firmware upgrade Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can be mirrored to one destination port. Flow-based redirection and mirroring Redirect or mirror traffic to a destination port or mirroring session based on flow Remote Switch Port Analyzer (RSPAN) Traffic can be mirrored across Layer 2 domain to a remote port on a different switch for easier troubleshooting sFlow agent Switch can export sFlow sample to external collectors. sFlow provides visibility into network traffic down to flow level DHCP (options 12, 59, 60, 66, 67, 82, 125, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, autoconfiguration (with configuration and image file download), DHCP relay, and hostname Secure Copy (SCP) Securely transfer files to and from the switch Autoconfiguration with Secure Copy (SCP) file download Enables secure mass deployment with protection of sensitive data Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment Smartports Simplified configuration of QoS and security capabilities Auto Smartports Applies the intelligence delivered through the Smartport roles and applies it automatically to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments Textview CLI Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI Localization Localization of GUI and documentation into multiple languages Login banner Configurable multiple banners for web as well as CLI Other management Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client (SSH secure support); automatic time settings from Management Station Green (power efficiency)Energy Detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. EEE Compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports Disable port LEDs LEDs can be manually turned off to save on energy Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up) Time-based PoE PoE power can be on or off based on user-defined schedule to save energy GeneralJumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes MAC table 16K addresses DiscoveryBonjour The switch advertises itself using the Bonjour protocol Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via Cisco Discovery Protocol Power over Ethernet802.3af PoE, 802.3at PoE+ or 60W PoE delivered over the RJ-45 ports within the listed power budgets The following switches support 802.3at PoE+, 802.3af, and Cisco prestandard (legacy) PoE. 60W PoE is also supported on select RJ-45 network ports on select models. The total power available for PoE per switch is as follows: Power dedicated to PoE 120 W Number of Ports That Support PoE 16 Hardware Power Consumption (worst case)System power consumption 110V=24.51W 220V=25.01 Power consumption (with PoE) 110V=156.4W 220V=154.5W Heat dissipation (BTU/hr) 536.39 PortsTotal system ports 18 x Gigabit Ethernet RJ-45 ports 16 x Gigabit Ethernet Combo ports (RJ-45 + SFP) 2 x SFP Console port Cisco standard RJ45 console port USB slot USB Type-A slot on the front panel of the switch for easy file and image management Buttons Reset button Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T LEDs System, Link/Act, PoE, Speed Flash 256 MB CPU 800 MHz ARM DRAM 512 MB Packet BufferPacket buffer (All numbers are aggregate across all ports as the buffers are dynamically shared:) 1,5 MB Supported SFP modulesSKU Media MGBSX1 Multimode fiber MGBLX1 Single-mode fiber MGBLH1 Single-mode fiber MGBT1 UTP cat 5e GLC-SX-MMD Multimode fiber GLC-LH-SMD Single-mode fiber GLC-BX-U Single-mode fiber GLC-BX-D Single-mode fiber GLC-TE UTP cat 5e EnvironmentalUnit dimensions (W x D x H) 268 x 297 x 44 mm (10.56 x 11.69 x 1.73 in) Unit weight 2.38 kg (5.25 lb) Power 100-240V 50-60 Hz, internal, universal Certifications UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A Operating temperature 23° to 122°F (-5° to 50°C) Storage temperature -13° to 158°F (-25° to 70°C) Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 90%, relative, noncondensing Acoustic Noise and Mean Time Between Failure (MTBF)Fan (number) Fanless Acoustic noise N/A MTBF @ 25°C (hours) 706983 Warranty Limited lifetime with next business day advance replacement Package contents Cisco Business 350 Series Managed Switch Power cord Mounting Kit Quick Start Guide Minimum Requirements Web browser: Chrome, Firefox, Edge, Safari Category 5e Ethernet network cable TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed (tonerpartner.cz)

Cisco switch CBS220-16P-2G - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Řada Cisco Business 220 jsou jednoduché a cenově dostupné chytré switche pro sítě podnikové třídy. Díky podpoře mobilních aplikací, nástroji Cisco Business Dashboard a několika možnostem PoE+ poskytuje CBS220 robustní síť v rámci omezeného rozpočtu. Stránky produktu: CBS220-16P-2G Quick start guide: Quick start guide Switching capacityForwarding rate in millions of packets per second (mpps; 64-byte packets) 26,78 Switching capacity in Gigabits per second (Gbps) 36 Layer 2 switchingMAC table Up to 8,192 Media Access Control (MAC) addresses Spanning Tree Protocol (STP) Standard 802.1d Spanning Tree support, enabled by default Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]) Multiple Spanning Tree instances using 802.1s (MSTP) 16 instances are supported Port grouping Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation Load balance based on source and destination MAC address, or source and destination MAC/IP VLAN Support for up to 256 Virtual Local Area Networks (VLANs) simultaneously Port-based and 802.1Q tag-based VLANs Management VLAN Guest VLAN Auto voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS QinQ VLAN VLANs transparently cross a service provider network while isolating traffic among customers Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain Head-of-Line (HOL) blocking HOL blocking prevention Jumbo frame Frame sizes up to 9,216 supported Loopback detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP. Automatic Media-Dependent Interface Crossover (MDIX) Automatically adjusts transmit and receive pairs if an incorrect cable type (crossover or straight-through) is installed. SecurityACLs Drop or rate limit based on source and destination MAC, VLAN ID or IP address, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol (TCP)/ User Datagram Protocol (UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, Internet Group Management Protocol (IGMP) packets, TCP flag Support up to 512 rules Port security Creates the ability to lock source MAC addresses to ports; limits the number of learned MAC addresses IEEE 802.1X (authenticator role) 802.1X: Remote Authentication Dial-in User Service (RADIUS) authentication; guest VLAN; Single-host, multiple-host, and multisession mode RADIUS, TACACS+ Supports RADIUS and Terminal Access Controller Access Control System (TACACS) authentication; switch functions as a client MAC address filtering Supported Storm control Broadcast, multicast, and unknown unicast DoS protection DOS attack prevention STP Bridge Protocol Data Unit (BPDU) Guard This security mechanism protects the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. Spanning Tree Loop Guard This feature provides additional protection against Layer 2 forwarding loops (STP loops). Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. SCP also uses SSH. SSH v1 and v2 are supported. Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch QoSPriority levels 8 hardware queues per port Scheduling Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS) Class of service Port-based; 802.1p VLAN priority-based; IPv4/v6 IP precedence, Type of Service (ToS), and DSCP-based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow-based Congestion avoidance A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization. MulticastInternet Group Management Protocol (IGMP) Versions 1, 2, and 3 Snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 256 multicast groups IGMP querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router StandardsStandards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad LACP, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, Request for Comments (RFC) 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 922, RFC 920, RFC 950, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1350, RFC 1533, RFC 1541, RFC 1624, RFC 1700, RFC 1867, RFC 2030, RFC 2616, RFC 2131, RFC 2132, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 2576, RFC 4330, RFC 1213, RFC 1215, RFC 1286, RFC 1442, RFC 1451, RFC 1493, RFC 1573, RFC 1643, RFC 1757, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2233, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 1157, RFC 1493, RFC 1215, RFC 3416 IPv6IPv6 IPv6 host mode IPv6 over Ethernet IPv6/IPv4 Dual Stack IPv6 neighbor and router discovery (ND) IPv6 stateless address auto-configuration Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD) ICMP version 6 IPv6 ACL Drop or rate limit IPv6 packets in hardware IPv6 QoS Prioritize IPv6 packets in hardware Multicast Listener Discovery (MLD v1/2) Snooping Deliver IPv6 multicast packets only to the required receivers IPv6 applications Web/SSL, Telnet server/SSH, DHCP Client, DHCP Autoconfig, Cisco Discovery Protocol (CDP), Link Layer Discovery Protocol (LLDP) IPv6 Requests for Comments (RFCs) supported RFC 4443 (which obsoletes RFC2463) - ICMP version 6 RFC 4291 (which obsoletes RFC 3513) - IPv6 address architecture RFC 4291 - IPv6 addressing architecture RFC 2460 - IPv6 specification RFC 4861 (which obsoletes RFC 2461) - Neighbor discovery for IPv6 RFC 4862 (which obsoletes RFC 2462) - IPv6 stateless address auto-configuration RFC 1981 - Path MTU discovery RFC 4007 - IPv6 scoped address architecture RFC 3484 - Default address selection mechanism ManagementCisco Business Dashboard Support direct management with Cisco Business Dashboard and mobile app. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site. Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips. Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a zero touch deployment experience. Supports Cisco PnP Connect Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, system dashboard, system maintenance, and monitoring Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment Command-line interface Scriptable CLI; a full CLI is supported. User privilege levels 1 and 15 are supported for the CLI SNMP Simple Management Network Protocol (SNMP) versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM) Standard Management Information Bases (MIBs) MIB-II (RFC1213) IF-MIB (RFC2863) Bridge-MIB (RFC4188) Bridge-MIB-Extension (RFC2674) RMON (RFC2819) Etherlike MIB (RFC3635) Radius Client MIB (RFC2618) Entity MIB (RFC2737) POWER-ETHERNET-MIB (RFC3621) Syslog MIB (RFC3164) Generic Traps MIB (RFC1215) SNMP-COMMUNITY-MIB SNMP-MIB LLDP-MIB LLDP-EXT-MED-MIB IEEE8023-LAG-MIB CISCO-PORT-SECURITY-MIB CISCO-ENVMON-MIB CISCO-CDP-MIB CISCO-CONFIG-COPY-MIB Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration Port mirroring Traffic on a port or VLAN can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. Four sessions are supported. Firmware upgrade Web browser upgrade (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP) Dual images for resilient firmware upgrades DHCP (Option 12, 66, 67, 82, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download), DHCP relay, and hostname Time synchronization Simple Network Time Protocol (SNTP) Login banner Configurable multiple banners for web as well as CLI Other management HTTP/HTTPS; TFTP upgrade; DHCP client; Bootstrap Protocol (BOOTP); cable diagnostics; ping; traceroute; syslog Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration Port mirroring Traffic on a port or VLAN can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. Four sessions are supported. Firmware upgrade Web browser upgrade (HTTP/HTTPS) and Trivial File Transfer Protocol (TFTP) Dual images for resilient firmware upgrades DHCP (Option 12, 66, 67, 82, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, auto-configuration (with configuration file download), DHCP relay, and hostname Time synchronization Simple Network Time Protocol (SNTP) Login banner Configurable multiple banners for web as well as CLI Other management HTTP/HTTPS; TFTP upgrade; DHCP client; Bootstrap Protocol (BOOTP); cable diagnostics; ping; traceroute; syslog DiscoveryBonjour The switch advertises itself using the Bonjour protocol Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED Extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones. Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. Displays brief information for connected Cisco network devices, IP phones, and wireless access points Power efficiencyEEE compliance (802.3az) Support 802.3az Energy Efficient Ethernet on all ports; substantially reduce the power consumption when link bandwidth is not at full utilization Energy Detect Automatically turns power off on Gigabit Ethernet and 10/100 RJ-45 ports when detecting a link down Active mode is resumed without loss of any packets when the switch detects the link up Disable port LEDs LEDs can be manually turned off to save on energy. Time-based PoE PoE power can be on or off based on user-defined schedule to save energy. Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up). Power over Ethernet 802.3af PoE or 802.3at PoE+ delivered over any of the RJ-45 network ports within the listed power budgets PoE Power Budget 130 W Number of Ports That Support PoE 16 Pre-standard PoE Support Cisco Pre-Standard PoE Intelligent PoE power management Support the granular power negotiation with CDP/LLDP communication with PD devices after IEEE classification HardwareButtons Reset button Cabling type Unshielded Twisted Pair (UTP) Category 5 or better for 10BASE-T/100BASE-TX; UTP Category 5 Ethernet or better for 1000BASE-T LEDs System, Link/Act, Speed Flash 64 MB CPU memory 256 MB PortsTotal system ports 18 Gigabit Ethernet RJ-45 ports 16 Gigabit Ethernet Uplink ports 2 Gigabit Ethernet Small form-factor pluggable (SFP) Packet BufferPacket buffer 4,1 Mb Supported SFP ModulesMGBSX1 Multimode fiber MGBLX1 Single-mode fiber MGBLH1 Single-mode fiber MGBT1 UTP Category 5 GLC-SX-MMD Multimode fiber GLC-LH-SMD Single-mode fiber GLC-BX-U Single-mode fiber GLC-BX-D Single-mode fiber GLC-TE UTP cat 5e EnvironmentalUnit dimensions (W x D x H) 440 x 203 x 44 mm (17.3 x 8.0 x 1.7 in) Unit weight 3.03 kg (6.68 lb) Power 100-240 V, 50-60 Hz, Internal Certifications UL (UL 60950), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A, C-tick Operating temperature 0-50° C Storage temperature –20° C to +70° C Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 90%, relative, noncondensing Power ConsumptionSystem power consumption 110V=16.8W 220V=18.3W Power consumption (with PoE) 110V=160.2W 220V=159.4W Heat dissipation (BTU/hr) 546.63 Acoustic Noise and Mean Time Between Failure (MTBF)Fan (number) Fanless Acoustic noise N/A MTBF @ 25°C (hours) 611476 Package contentsPackage contents Cisco Business 220 Series Ethernet switch Power cord or adaptor Mounting kit Quick start guide (tonerpartner.cz)

Cisco switch CBS250-16P-2G - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Řada Cisco Business 250 představuje novou generaci cenově dostupných inteligentních switchů, které kombinují vysoký síťový výkon, zabezpečení a spolehlivost s komplexní sadou síťových funkcí potřebných pro spolehlivou síť malých firem. Záruka platná do End of Support 31. 10. 2029. Oznámení End of Life pro CISCO CBS250 Stránky produktu: CBS250-16P-2G Quick start guide: Quick start guide Switching capacity (All switches are wire-speed and nonblocking)Forwarding rate in millions of packets per second (mpps; 64-byte packets) 26,78 Switching capacity in Gigabits per second (Gbps) 36 Layer 2 switchingSpanning Tree Protocol (STP) Standard 802.1d spanning tree support Fast convergence using 802.1w (Rapid Spanning Tree Protocol [RSTP]), enabled by default Multiple spanning tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+); 126 instances are supported Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 4 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad Link Aggregation Group (LAG) VLAN Support for up to 255 active VLANs simultaneously Port-based and 802.1Q tag-based VLANs Management VLAN Guest VLAN Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers networkwide zero-touch deployment of voice endpoints and call control devices Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) Protocols for automatically propagating and configuring VLANs in a bridged domain IGMP (versions 1, 2, and 3) snooping Internet Group Management Protocol (IGMP) limits bandwidth-intensive multicast traffic to only the requesters; supports 255 multicast groups (source-specific multicasting is also supported) IGMP querier Used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router HOL blocking Head-of-Line (HOL) blocking prevention Loopback detection Provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP. Layer 3 routingIPv4 routing Wire-speed routing of IPv4 packets Up to 32 static routes and up to 16 IP interfaces IPv6 routing Wire-speed routing of IPv6 packets Layer 3 interface Configuration of Layer 3 interface on physical port, LAG, VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for CIDR Dynamic Host Configuration Protocol (DHCP) relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BootP)/DHCP packets SecuritySecure Sockets Layer (SSL) SSL encrypts all HTTPS traffic, allowing secure access to the browser-based management GUI in the switch Secure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy (SCP) also uses SSH. SSH v1 and v2 are supported. IEEE 802.1X (authenticator role) Remote Authentication Dial-In User Service (RADIUS) authentication, guest VLAN, single/multiple host mode, and single/multiple sessions STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) Secure Core Technology (SCT) Ensures that the switch will receive and process management and protocol traffic no matter how much traffic is received Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plain text or encrypted is provided according to the user-configured access level and the access method of the user Trustworthy systems Trustworthy systems provide a highly secure foundation for Cisco products Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC]) Port security Ability to lock source MAC addresses to ports and limit the number of learned MAC addresses RADIUS Supports RADIUS authentication for management access. Switch functions as a client. Storm control Broadcast, multicast, and unknown unicast DoS prevention Denial-of-Service (DoS) attack prevention Multiple user privilege levels in CLI Level 1, 7, and 15 privilege levels Access Control Lists (ACLs) Support for up to 512 rules Drop or rate limit based on source and destination MAC, VLAN ID or IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, TCP/UDP source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported QoSPriority levels 8 hardware queues Scheduling Strict priority and Weighted Round-Robin (WRR) queue assignment based on DSCP and class of service (802.1p/CoS) Class of service Port based; 802.1p VLAN priority based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP based; Differentiated Services (DiffServ); classification and re-marking ACLs, trusted QoS Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based Congestion avoidance A TCP congestion avoidance algorithm is required to reduce and prevent global TCP loss synchronization StandardsStandards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3x Flow Control, IEEE 802.3 ad LACP, IEEE 802.1D (STP), IEEE 802.1Q/p VLAN, IEEE 802.1w RSTP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 879, RFC 896, RFC 826, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330 IPv6IPv6 IPv6 host mode IPv6 over Ethernet IPv6/IPv4 Dual Stack IPv6 Neighbor Discovery (ND) IPv6 stateless address auto configuration Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD) Internet Control Message Protocol (ICMP) version 6 IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) support USGv6 and IPv6 Gold Logo certified IPv6 QoS Prioritize IPv6 packets in hardware IPv6 ACL Drop or rate limit IPv6 packets in hardware Multicast Listener Discovery (MLD v1/2) snooping Deliver IPv6 multicast packets only to the required receivers IPv6 applications Web/SSL, Telnet server/SSH, Ping, Traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), Simple Network Management Protocol (SNMP), Remote Authentication Dial-In User Service (RADIUS), Syslog, DNS client, DHCP client, DHCP autoconfig IPv6 RFCs supported RFC 4443 (which obsoletes RFC 2463): ICMPv6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 Addressing Architecture RFC 2460: IPv6 Specification RFC 4861 (which obsoletes RFC 2461): Neighbor Discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 Stateless Address Autoconfiguration RFC 1981: Path MTU Discovery RFC 4007: IPv6 Scoped Address Architecture RFC 3484: Default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: Management Information Base (MIB) IPv6: Textual Conventions and General Group RFC 3595: Textual Conventions for IPv6 Flow Label ManagementCisco Business Dashboard Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site. Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips. Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience. Supports Cisco PnP Connect Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports configuration, wizards, system dashboard, system maintenance, and monitoring Basic and advanced mode for maximum operational efficiency SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP v3 User-based Security Model (USM) Remote monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration Firmware upgrade Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 4 source ports can be mirrored to one destination port VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 4 source VLANs can be mirrored to one destination port Dynamic Host Configuration Protocol (DHCP) (options 12, 59, 60, 66, 67, 125, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server), to obtain IP address, autoconfiguration (with configuration and image file download), DHCP Relay, and host name Secure Copy (SCP) Securely transfers files to and from the switch Autoconfiguration with SCP file download Enables mass deployment with protection of sensitive data Text-editable configs Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment Smartports Simplified configuration of QoS and security capabilities Auto Smartports Automatically applies the intelligence delivered through the Smartports roles to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments. Text view Command-Line Interface (CLI) Scriptable CLI. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI. Localization Localization of GUI and documentation into multiple languages Login banner Configurable multiple banners for web as well as CLI Other management Traceroute; single IP management; HTTP/HTTPS; RADIUS; port mirroring; TFTP upgrade; DHCP client; Simple Network Time Protocol (SNTP); cable diagnostics; Ping; syslog; Telnet client (SSH secure support); automatic time settings from Management Station Green (power efficiency)Energy detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link is up Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables EEE compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports Disable port LEDs LEDs can be manually turned off to save on energy Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up) Time-based PoE PoE power can be on or off based on user-defined schedule to save energy GeneralJumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes MAC table 8K addresses DiscoveryBonjour The switch advertises itself using the Bonjour protocol Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions Link Layer Discovery Protocol (LLDP) allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics using Cisco Discovery Protocol Power over Ethernet802.3at PoE+ and 802.3af PoE delivered over any of the RJ-45 ports within the listed power budgets The following switches support 802.3at PoE+, 802.3af, and Cisco prestandard (legacy) PoE. Maximum power of 30.0W to any 10/100 or Gigabit Ethernet port, until the PoE budget for the switch is reached. The total power available for PoE per switch is as follows: Power dedicated to PoE 120 W Number of ports that support PoE 16 Hardware Power ConsumptionSystem power consumption 110V=24.51W 220V=25.01W Power consumption (with PoE) 110V=156.4W 220V=154.5W Heat dissipation (BTU/hr) 536.05 PortsTotal system ports 18 Gigabit Ethernet RJ-45 ports 16 Gigabit Ethernet Combo ports (RJ-45 + SFP) 2 SFP Console port Cisco Standard RJ45 console port USB slot USB Type-A slot on the front panel of the switch for easy file and image management Buttons Reset button Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T LEDs System, Link/Act, PoE, Speed Flash 256 MB CPU 800 MHz ARM DRAM 512 MB Packet BufferPacket buffer 1,5 MB Supported SFP ModulesMGBSX1 Multimode fiber MGBLX1 Single-mode fiber MGBLH1 Single-mode fiber MGBT1 UTP Category 5 GLC-SX-MMD Multimode fiber GLC-LH-SMD Single-mode fiber GLC-BX-U Single-mode fiber GLC-BX-D Single-mode fiber GLC-TE UTP cat 5e EnvironmentalUnit dimensions (W x D x H) 268 x 297 x 44 mm (10.56 x 11.69 x 1.73 in) Unit weight 2.38 kg (5.25 lb) Power 100 to 240V 50 to 60 Hz, internal, universal Certifications UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A Operating temperature 23° to 122°F (-5° to 50°C Storage temperature -13° to 158°F (-25° to 70°C) Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 90%, relative, noncondensing Acoustic Noise and Mean Time Between Failure (MTBF)Fan (number) Fanless Acoustic noise N/A MTBF @ 25°C (hours) 706983 Warranty Limited lifetime Package contentsPackage contents Cisco Business 250 Series Smart Switch Power cord Mounting kit Quick start guide (tonerpartner.cz)

Cisco switch CBS350-16FP-2G-UK - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu UK = produkt určený pro trh v Anglii identický produkt k EU modelům s rozdílem napájecího kabelu pro UK, náhradní kabel CAB-TA-EU je součástí objednávky Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci. Záruka platná do End of Support 31. 10. 2029. Oznámení End of Life pro CISCO CBS350 Stránky produktu: CBS350-16FP-2G-EU Quick start guide: Quick start guide Switching capacity and forwarding rate (All switches are wire speed and nonblocking)Capacity in Millions of Packets per Second (mpps) (64-byte packets) 26,78 Switching Capacity in Gigabits per Second (Gbps) 36 Layer 2 switchingSpanning Tree Protocol (STP) Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4,094 VLANs simultaneously Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication CPE VLAN Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported) IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols. Head-of-Line (HOL) blocking HOL blocking prevention Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3IPv4 routing Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wirespeed routing of IPv6 packets Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for classless interdomain routing RIP v2 Support for Routing Information Protocol version 2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Securityecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers. IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing. Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks. IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability Secure Core Technology (SCT) Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user. Trustworthy systems Trustworthy systems provide a highly secure foundation for Cisco products Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC]) Private VLAN Private VLAN provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic; supports multiple uplinks Layer 2 isolation Private VLAN Edge (PVE) PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks Port security Ability to lock source MAC addresses to ports and limits the number of learned MAC addresses RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session Storm control Broadcast, multicast, and unknown unicast DoS prevention Denial-of-Service (DOS) attack prevention Multiple user privilege levels in CLI Level 1, 7, and 15 privilege levels ACLs Support for up to 1,024 rules Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol/User Datagram Protocol (TCP/UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported Quality of ServicePriority levels 8 hardware queues Scheduling Strict priority and Weighted Round-Robin (WRR) Class of service Port based; 802.1p VLAN priority-based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP-based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS Queue assignment based on DSCP and class of service (802.1p/CoS) Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization iSCSI traffic optimization A mechanism for giving priority to iSCSI traffic over other types of traffic Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbit/s Ethernet over fiber for LAN, IEEE 802.3an 10GBase-T 10 Gbit/s Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 826, RFC 879, RFC 896, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3176, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330 IPv6IPv6 IPv6 host mode; IPv6 over Ethernet; Dual IPv6/IPv4 stack IPv6 neighbor and router discovery (ND); IPv6 stateless address autoconfiguration; Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD); ICMP version 6 DHCPv6 stateful client IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) tunnel support USGv6 and IPv6 Gold Logo certified IPv6 QoS Prioritize IPv6 packets in hardware IPv6 ACL Drop or rate limit IPv6 packets in hardware IPv6 First Hop Security RA guard ND inspection DHCPv6 guard Neighbor binding table (snooping and static entries) Neighbor binding integrity check Multicast Listener Discovery (MLD v1/2) snooping Deliver IPv6 multicast packets only to the required receivers MLD proxy The MLD proxy provides a mechanism for multicast forwarding based on MLD membership information without the need for more complicated multicast routing protocols. IPv6 applications Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, Domain Name System (DNS) client, Telnet Client, DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, Terminal Access Controller Access Control System Plus (TACACS+) IPv6 RFCs supported RFC 4443 (which obsoletes RFC2463): ICMP version 6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address autoconfiguration RFC 1981: path MTU discovery RFC 4007: IPv6 scoped address architecture RFC 3484: default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: MIB IPv6: textual conventions and general group RFC 3595: textual conventions for IPv6 flow label ManagementCisco Business Dashboard Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site. Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips. Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience Supports Cisco PnP Connect Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM) Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration Firmware upgrade Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can be mirrored to one destination port. Flow-based redirection and mirroring Redirect or mirror traffic to a destination port or mirroring session based on flow Remote Switch Port Analyzer (RSPAN) Traffic can be mirrored across Layer 2 domain to a remote port on a different switch for easier troubleshooting sFlow agent Switch can export sFlow sample to external collectors. sFlow provides visibility into network traffic down to flow level DHCP (options 12, 59, 60, 66, 67, 82, 125, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, autoconfiguration (with configuration and image file download), DHCP relay, and hostname Secure Copy (SCP) Securely transfer files to and from the switch Autoconfiguration with Secure Copy (SCP) file download Enables secure mass deployment with protection of sensitive data Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment Smartports Simplified configuration of QoS and security capabilities Auto Smartports Applies the intelligence delivered through the Smartport roles and applies it automatically to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments Textview CLI Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI Localization Localization of GUI and documentation into multiple languages Login banner Configurable multiple banners for web as well as CLI Other management Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client (SSH secure support); automatic time settings from Management Station Green (power efficiency)Energy Detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. EEE Compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports Disable port LEDs LEDs can be manually turned off to save on energy Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up) Time-based PoE PoE power can be on or off based on user-defined schedule to save energy GeneralJumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes MAC table 16K addresses DiscoveryBonjour The switch advertises itself using the Bonjour protocol Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via Cisco Discovery Protocol Power over Ethernet802.3af PoE, 802.3at PoE+ or 60W PoE delivered over the RJ-45 ports within the listed power budgets The following switches support 802.3at PoE+, 802.3af, and Cisco prestandard (legacy) PoE. 60W PoE is also supported on select RJ-45 network ports on select models. The total power available for PoE per switch is as follows: Power dedicated to PoE 240 W Number of Ports That Support PoE 16 Hardware Power Consumption (worst case)System power consumption 110V=27.53W 220V=26.68 Power consumption (with PoE) 110V=284W 220V=279.8W Heat dissipation (BTU/hr) 971.78 PortsTotal system ports 18 x Gigabit Ethernet RJ-45 ports 16 x Gigabit Ethernet Combo ports (RJ-45 + SFP) 2 x SFP Console port Cisco standard RJ45 console port USB slot USB Type-A slot on the front panel of the switch for easy file and image management Buttons Reset button Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T LEDs System, Link/Act, PoE, Speed Flash 256 MB CPU 800 MHz ARM DRAM 512 MB Packet BufferPacket buffer (All numbers are aggregate across all ports as the buffers are dynamically shared:) 1,5 MB Supported SFP modulesSKU Media MGBSX1 Multimode fiber MGBLX1 Single-mode fiber MGBLH1 Single-mode fiber MGBT1 UTP cat 5e GLC-SX-MMD Multimode fiber GLC-LH-SMD Single-mode fiber GLC-BX-U Single-mode fiber GLC-BX-D Single-mode fiber GLC-TE UTP cat 5e EnvironmentalUnit dimensions (W x D x H) 268 x 308 x 44 mm (10.56 x 12.14 x 1.73 in) Unit weight 2.49 kg (5.49 lb) Power 100-240V 50-60 Hz, internal, universal Certifications UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A Operating temperature 23° to 122°F (-5° to 50°C) Storage temperature -13° to 158°F (-25° to 70°C) Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 90%, relative, noncondensing Acoustic Noise and Mean Time Between Failure (MTBF)Fan (number) Fanless Acoustic noise N/A MTBF @ 25°C (hours) 706983 Warranty Limited lifetime with next business day advance replacement Package contents Cisco Business 350 Series Managed Switch Power cord Mounting Kit Quick Start Guide Minimum Requirements Web browser: Chrome, Firefox, Edge, Safari Category 5e Ethernet network cable TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed (tonerpartner.cz)

Cisco switch CBS350-16P-E-2G-EU - REFRESH CISCO REFRESH jsou repasované produkty, které společnost CISCO dodává s certifikací kvality, zárukou a servisní podporou odpovídající ekvivalentnímu novému produktu Řízené switche řady Cisco Business 350 jsou spolehlivými stavebními prvky pro sítě malých firem. Díky intuitivnímu ovládacímu panelu, pokročilým funkcím a všudypřítomnému zabezpečení urychlují spravované switche řady Cisco Business 350 vaši digitální transformaci. Záruka platná do End of Support 31. 10. 2029. Oznámení End of Life pro CISCO CBS350 Stránky produktu: CBS350-16P-E-2G-EU Quick start guide: Quick start guide Switching capacity and forwarding rate (All switches are wire speed and nonblocking)Capacity in Millions of Packets per Second (mpps) (64-byte packets) 26,78 Switching Capacity in Gigabits per Second (Gbps) 36 Layer 2 switchingSpanning Tree Protocol (STP) Standard 802.1d Spanning Tree support Fast convergence using 802.1w (Rapid Spanning Tree [RSTP]), enabled by default Multiple Spanning Tree instances using 802.1s (MSTP); 8 instances are supported Per-VLAN Spanning Tree Plus (PVST+) and Rapid PVST+ (RPVST+); 126 instances are supported Port grouping/link aggregation Support for IEEE 802.3ad Link Aggregation Control Protocol (LACP) Up to 8 groups Up to 8 ports per group with 16 candidate ports for each (dynamic) 802.3ad link aggregation VLAN Support for up to 4,094 VLANs simultaneously Port-based and 802.1Q tag-based VLANs; MAC-based VLAN; protocol-based VLAN; IP subnet-based VLAN Management VLAN Private VLAN with promiscuous, isolated, and community port Private VLAN Edge (PVE), also known as protected ports, with multiple uplinks Guest VLAN, unauthenticated VLAN Dynamic VLAN assignment via RADIUS server along with 802.1x client authentication CPE VLAN Voice VLAN Voice traffic is automatically assigned to a voice-specific VLAN and treated with appropriate levels of QoS. Voice Services Discovery Protocol (VSDP) delivers network wide zero-touch deployment of voice endpoints and call control devices Multicast TV VLAN Multicast TV VLAN allows the single multicast VLAN to be shared in the network while subscribers remain in separate VLANs. This feature is also known as Multicast VLAN Registration (MVR) VLAN Translation Support for VLAN One-to-One Mapping. In VLAN One-to-One Mapping, on an edge interface customer VLANs (C-VLANs) are mapped to service provider VLANs (S-VLANs) and the original C-VLAN tags are replaced by the specified S-VLAN Q-in-Q VLANs transparently cross a service provider network while isolating traffic among customers Selective Q-in-Q Selective Q-in-Q is an enhancement to the basic Q-in-Q feature and provides, per edge interface, multiple mappings of different C-VLANs to separate S-VLANs Selective Q-in-Q also allows configuring of Ethertype (Tag Protocol Identifier [TPID]) of the S-VLAN tag Layer 2 protocol tunneling over Q-in-Q is also supported Generic VLAN Registration Protocol (GVRP)/Generic Attribute Registration Protocol (GARP) Generic VLAN Registration Protocol (GVRP) and Generic Attribute Registration Protocol (GARP) enable automatic propagation and configuration of VLANs in a bridged domain Unidirectional Link Detection (UDLD) UDLD monitors physical connection to detect unidirectional links caused by incorrect wiring or cable/port faults to prevent forwarding loops and black holing of traffic in switched networks Dynamic Host Configuration Protocol (DHCP) Relay at Layer 2 Relay of DHCP traffic to DHCP server in different VLAN; works with DHCP Option 82 Internet Group Management Protocol (IGMP) versions 1, 2, and 3 snooping IGMP limits bandwidth-intensive multicast traffic to only the requesters; supports 2K multicast groups (source-specific multicasting is also supported) IGMP Querier IGMP querier is used to support a Layer 2 multicast domain of snooping switches in the absence of a multicast router IGMP proxy The IGMP proxy provides a mechanism for multicast forwarding based on IGMP membership information without the need for more complicated multicast routing protocols. Head-of-Line (HOL) blocking HOL blocking prevention Loopback Detection Loopback detection provides protection against loops by transmitting loop protocol packets out of ports on which loop protection has been enabled. It operates independently of STP Layer 3IPv4 routing Wirespeed routing of IPv4 packets Up to 990 static routes and up to 128 IP interfaces IPv6 routing Wirespeed routing of IPv6 packets Layer 3 Interface Configuration of Layer 3 interface on physical port, Link Aggregation (LAG), VLAN interface, or loopback interface Classless Interdomain Routing (CIDR) Support for classless interdomain routing RIP v2 Support for Routing Information Protocol version 2 for dynamic routing Policy-Based Routing (PBR) Flexible routing control to direct packets to different next hop based on IPv4 or IPv6 Access Control List (ACL) DHCP Server Switch functions as an IPv4 DHCP server serving IP addresses for multiple DHCP pools/scopes Support for DHCP options DHCP relay at Layer 3 Relay of DHCP traffic across IP domains User Datagram Protocol (UDP) relay Relay of broadcast information across Layer 3 domains for application discovery or relaying of Bootstrap Protocol (BOOTP)/DHCP packets Securityecure Shell (SSH) Protocol SSH is a secure replacement for Telnet traffic. Secure Copy Protocol (SCP) also uses SSH. SSH v1 and v2 are supported Secure Sockets Layer (SSL) SSL support: Encrypts all HTTPS traffic, allowing highly secure access to the browser-based management GUI in the switch IEEE 802.1X (Authenticator role) 802.1X: Remote Authentication Dial-In User Service (RADIUS) authentication and accounting, MD5 hash; guest VLAN; unauthenticated VLAN, single/multiple host mode and single/multiple sessions Supports time-based 802.1X; dynamic VLAN assignment; MAC authentication IEEE 802.1X supplicant A switch can be configured to act as a supplicant to another switch. This enables extended secure access in areas outside the wiring closet (such as conference rooms) Web-based authentication Web-based authentication provides network admission control through web browser to any host devices and operating systems STP Bridge Protocol Data Unit (BPDU) Guard A security mechanism to protect the network from invalid configurations. A port enabled for BPDU Guard is shut down if a BPDU message is received on that port. This avoids accidental topology loops STP Root Guard This prevents edge devices not in the network administrator’s control from becoming Spanning Tree Protocol root nodes STP loopback guard Provides additional protection against Layer 2 forwarding loops (STP loops) DHCP snooping Filters out DHCP messages with unregistered IP addresses and/or from unexpected or untrusted interfaces. This prevents rogue devices from behaving as DHCP Servers. IP Source Guard (IPSG) When IP Source Guard is enabled at a port, the switch filters out IP packets received from the port if the source IP addresses of the packets have not been statically configured or dynamically learned from DHCP snooping. This prevents IP address spoofing. Dynamic ARP Inspection (DAI) The switch discards ARP packets from a port if there are no static or dynamic IP/MAC bindings or if there is a discrepancy between the source or destination addresses in the ARP packet. This prevents man-in-the-middle attacks. IP/MAC/Port Binding (IPMB) The preceding features (DHCP Snooping, IP Source Guard, and Dynamic ARP Inspection) work together to prevent DOS attacks in the network, thereby increasing network availability Secure Core Technology (SCT) Makes sure that the switch will receive and process management and protocol traffic no matter how much traffic is received Secure Sensitive Data (SSD) A mechanism to manage sensitive data (such as passwords, keys, and so on) securely on the switch, populating this data to other devices, and secure autoconfig. Access to view the sensitive data as plaintext or encrypted is provided according to the user-configured access level and the access method of the user. Trustworthy systems Trustworthy systems provide a highly secure foundation for Cisco products Run-time defenses (Executable Space Protection [X-Space], Address Space Layout Randomization [ASLR], Built-In Object Size Checking [BOSC]) Private VLAN Private VLAN provides security and isolation between switch ports, which helps ensure that users cannot snoop on other users’ traffic; supports multiple uplinks Layer 2 isolation Private VLAN Edge (PVE) PVE (also known as protected ports) provides Layer 2 isolation between devices in the same VLAN, supports multiple uplinks Port security Ability to lock source MAC addresses to ports and limits the number of learned MAC addresses RADIUS/TACACS+ Supports RADIUS and TACACS authentication. Switch functions as a client RADIUS accounting The RADIUS accounting functions allow data to be sent at the start and end of services, indicating the amount of resources (such as time, packets, bytes, and so on) used during the session Storm control Broadcast, multicast, and unknown unicast DoS prevention Denial-of-Service (DOS) attack prevention Multiple user privilege levels in CLI Level 1, 7, and 15 privilege levels ACLs Support for up to 1,024 rules Drop or rate limit based on source and destination MAC, VLAN ID, IPv4 or IPv6 address, IPv6 flow label, protocol, port, Differentiated Services Code Point (DSCP)/IP precedence, Transmission Control Protocol/User Datagram Protocol (TCP/UDP) source and destination ports, 802.1p priority, Ethernet type, Internet Control Message Protocol (ICMP) packets, IGMP packets, TCP flag; ACL can be applied on both ingress and egress sides Time-based ACLs supported Quality of ServicePriority levels 8 hardware queues Scheduling Strict priority and Weighted Round-Robin (WRR) Class of service Port based; 802.1p VLAN priority-based; IPv4/v6 IP precedence/Type of Service (ToS)/DSCP-based; Differentiated Services (DiffServ); classification and remarking ACLs, trusted QoS Queue assignment based on DSCP and class of service (802.1p/CoS) Rate limiting Ingress policer; egress shaping and rate control; per VLAN, per port, and flow based; 2R3C policing Congestion avoidance A TCP congestion avoidance algorithm is required to minimize and prevent global TCP loss synchronization iSCSI traffic optimization A mechanism for giving priority to iSCSI traffic over other types of traffic Standards IEEE 802.3 10BASE-T Ethernet, IEEE 802.3u 100BASE-TX Fast Ethernet, IEEE 802.3ab 1000BASE-T Gigabit Ethernet, IEEE 802.3ad Link Aggregation Control Protocol, IEEE 802.3z Gigabit Ethernet, IEEE 802.3ae 10 Gbit/s Ethernet over fiber for LAN, IEEE 802.3an 10GBase-T 10 Gbit/s Ethernet over copper twisted pair cable, IEEE 802.3x Flow Control, IEEE 802.1D (STP, GARP, and GVRP), IEEE 802.1Q/p VLAN, IEEE 802.1w Rapid STP, IEEE 802.1s Multiple STP, IEEE 802.1X Port Access Authentication, IEEE 802.3af, IEEE 802.3at, IEEE 802.1AB Link Layer Discovery Protocol, IEEE 802.3az Energy Efficient Ethernet, RFC 768, RFC 783, RFC 791, RFC 792, RFC 793, RFC 813, RFC 826, RFC 879, RFC 896, RFC 854, RFC 855, RFC 856, RFC 858, RFC 894, RFC 919, RFC 920, RFC 922, RFC 950, RFC 951, RFC 1042, RFC 1071, RFC 1123, RFC 1141, RFC 1155, RFC 1157, RFC 1213, RFC 1215, RFC 1286, RFC 1350, RFC 1442, RFC 1451, RFC 1493, RFC 1533, RFC 1541, RFC 1542, RFC 1573, RFC 1624, RFC 1643, RFC 1700, RFC 1757, RFC 1867, RFC 1907, RFC 2011, RFC 2012, RFC 2013, RFC 2030, RFC 2131, RFC 2132, RFC 2233, RFC 2576, RFC 2616, RFC 2618, RFC 2665, RFC 2666, RFC 2674, RFC 2737, RFC 2819, RFC 2863, RFC 3164, RFC 3176, RFC 3411, RFC 3412, RFC 3413, RFC 3414, RFC 3415, RFC 3416, RFC 4330 IPv6IPv6 IPv6 host mode; IPv6 over Ethernet; Dual IPv6/IPv4 stack IPv6 neighbor and router discovery (ND); IPv6 stateless address autoconfiguration; Path Maximum Transmission Unit (MTU) discovery Duplicate Address Detection (DAD); ICMP version 6 DHCPv6 stateful client IPv6 over IPv4 network with Intrasite Automatic Tunnel Addressing Protocol (ISATAP) tunnel support USGv6 and IPv6 Gold Logo certified IPv6 QoS Prioritize IPv6 packets in hardware IPv6 ACL Drop or rate limit IPv6 packets in hardware IPv6 First Hop Security RA guard ND inspection DHCPv6 guard Neighbor binding table (snooping and static entries) Neighbor binding integrity check Multicast Listener Discovery (MLD v1/2) snooping Deliver IPv6 multicast packets only to the required receivers MLD proxy The MLD proxy provides a mechanism for multicast forwarding based on MLD membership information without the need for more complicated multicast routing protocols. IPv6 applications Web/SSL, Telnet server/SSH, ping, traceroute, Simple Network Time Protocol (SNTP), Trivial File Transfer Protocol (TFTP), SNMP, RADIUS, syslog, Domain Name System (DNS) client, Telnet Client, DHCP Client, DHCP Autoconfig, IPv6 DHCP Relay, Terminal Access Controller Access Control System Plus (TACACS+) IPv6 RFCs supported RFC 4443 (which obsoletes RFC2463): ICMP version 6 RFC 4291 (which obsoletes RFC 3513): IPv6 address architecture RFC 4291: IPv6 addressing architecture RFC 2460: IPv6 specification RFC 4861 (which obsoletes RFC 2461): neighbor discovery for IPv6 RFC 4862 (which obsoletes RFC 2462): IPv6 stateless address autoconfiguration RFC 1981: path MTU discovery RFC 4007: IPv6 scoped address architecture RFC 3484: default address selection mechanism RFC 5214 (which obsoletes RFC 4214): ISATAP tunneling RFC 4293: MIB IPv6: textual conventions and general group RFC 3595: textual conventions for IPv6 flow label ManagementCisco Business Dashboard Support for embedded probe for Cisco Business Dashboard running on the switch. Eliminates the need to set up a separate hardware or virtual machine for the Cisco Business Dashboard Probe on site. Cisco Business mobile app Mobile app for Cisco Business Switch and Wireless products. Helps to set up a local network in minutes and provide easy management at your fingertips. Cisco Network Plug and Play (PnP) agent The Cisco Network Plug and Play solution provides a simple, secure, unified, and integrated offering to ease new branch or campus device rollouts or for provisioning updates to an existing network. The solution provides a unified approach to provision Cisco routers, switches, and wireless devices with a near-zero-touch deployment experience Supports Cisco PnP Connect Web user interface Built-in switch configuration utility for easy browser-based device configuration (HTTP/HTTPS). Supports simple and advanced mode, configuration, wizards, customizable dashboard, system maintenance, monitoring, online help, and universal search SNMP SNMP versions 1, 2c, and 3 with support for traps, and SNMP version 3 User-based Security Model (USM) Remote Monitoring (RMON) Embedded RMON software agent supports 4 RMON groups (history, statistics, alarms, and events) for enhanced traffic management, monitoring, and analysis IPv4 and IPv6 dual stack Coexistence of both protocol stacks to ease migration Firmware upgrade Web browser upgrade (HTTP/HTTPS) and TFTP and upgrade over SCP running over SSH Dual images for resilient firmware upgrades Port mirroring Traffic on a port can be mirrored to another port for analysis with a network analyzer or RMON probe. Up to 8 source ports can be mirrored to one destination port. VLAN mirroring Traffic from a VLAN can be mirrored to a port for analysis with a network analyzer or RMON probe. Up to 8 source VLANs can be mirrored to one destination port. Flow-based redirection and mirroring Redirect or mirror traffic to a destination port or mirroring session based on flow Remote Switch Port Analyzer (RSPAN) Traffic can be mirrored across Layer 2 domain to a remote port on a different switch for easier troubleshooting sFlow agent Switch can export sFlow sample to external collectors. sFlow provides visibility into network traffic down to flow level DHCP (options 12, 59, 60, 66, 67, 82, 125, 129, and 150) DHCP options facilitate tighter control from a central point (DHCP server) to obtain IP address, autoconfiguration (with configuration and image file download), DHCP relay, and hostname Secure Copy (SCP) Securely transfer files to and from the switch Autoconfiguration with Secure Copy (SCP) file download Enables secure mass deployment with protection of sensitive data Text-editable config files Config files can be edited with a text editor and downloaded to another switch, facilitating easier mass deployment Smartports Simplified configuration of QoS and security capabilities Auto Smartports Applies the intelligence delivered through the Smartport roles and applies it automatically to the port based on the devices discovered over Cisco Discovery Protocol or LLDP-MED. This facilitates zero-touch deployments Textview CLI Scriptable command-line interface. A full CLI as well as a menu-based CLI is supported. User privilege levels 1, 7, and 15 are supported for the CLI Localization Localization of GUI and documentation into multiple languages Login banner Configurable multiple banners for web as well as CLI Other management Traceroute; single IP management; HTTP/HTTPS; SSH; RADIUS; port mirroring; TFTP upgrade; DHCP client; BOOTP; SNTP; Xmodem upgrade; cable diagnostics; ping; syslog; Telnet client (SSH secure support); automatic time settings from Management Station Green (power efficiency)Energy Detect Automatically turns power off on RJ-45 port when detecting link down. Active mode is resumed without loss of any packets when the switch detects the link up Cable length detection Adjusts the signal strength based on the cable length. Reduces the power consumption for shorter cables. EEE Compliant (802.3az) Supports IEEE 802.3az on all copper Gigabit Ethernet ports Disable port LEDs LEDs can be manually turned off to save on energy Time-based port operation Link up or down based on user-defined schedule (when the port is administratively up) Time-based PoE PoE power can be on or off based on user-defined schedule to save energy GeneralJumbo frames Frame sizes up to 9K bytes. The default MTU is 2K bytes MAC table 16K addresses DiscoveryBonjour The switch advertises itself using the Bonjour protocol Link Layer Discovery Protocol (LLDP) (802.1ab) with LLDP-MED extensions LLDP allows the switch to advertise its identification, configuration, and capabilities to neighboring devices that store the data in a MIB. LLDP-MED is an enhancement to LLDP that adds the extensions needed for IP phones Cisco Discovery Protocol The switch advertises itself using the Cisco Discovery Protocol. It also learns the connected device and its characteristics via Cisco Discovery Protocol Power over Ethernet802.3af PoE, 802.3at PoE+ or 60W PoE delivered over the RJ-45 ports within the listed power budgets The following switches support 802.3at PoE+, 802.3af, and Cisco prestandard (legacy) PoE. 60W PoE is also supported on select RJ-45 network ports on select models. The total power available for PoE per switch is as follows: Power dedicated to PoE 120 W Number of Ports That Support PoE 16 Hardware Power Consumption (worst case)System power consumption 110V=23.65W 220V=23.68 Power consumption (with PoE) 110V=150.1W 220V=148.8W Heat dissipation (BTU/hr) 512.16 PortsTotal system ports 18 x Gigabit Ethernet RJ-45 ports 16 x Gigabit Ethernet Combo ports (RJ-45 + SFP) 2 x SFP Console port Cisco standard RJ45 console port USB slot USB Type-A slot on the front panel of the switch for easy file and image management Buttons Reset button Cabling type Unshielded Twisted Pair (UTP) Category 5e or better for 1000BASE-T LEDs System, Link/Act, PoE, Speed Flash 256 MB CPU 800 MHz ARM DRAM 512 MB Packet BufferPacket buffer (All numbers are aggregate across all ports as the buffers are dynamically shared:) 1,5 MB Supported SFP modulesSKU Media MGBSX1 Multimode fiber MGBLX1 Single-mode fiber MGBLH1 Single-mode fiber MGBT1 UTP cat 5e GLC-SX-MMD Multimode fiber GLC-LH-SMD Single-mode fiber GLC-BX-U Single-mode fiber GLC-BX-D Single-mode fiber GLC-TE UTP cat 5e EnvironmentalUnit dimensions (W x D x H) 268 x 210 x 44 mm (10.56 x 8.26x 1.73 in) Unit weight 1.42 kg (3.13 lb) Power 100-240V 50-60 Hz, external Certifications UL (UL 62368), CSA (CSA 22.2), CE mark, FCC Part 15 (CFR 47) Class A Operating temperature 23° to 122°F (-5° to 50°C) Storage temperature -13° to 158°F (-25° to 70°C) Operating humidity 10% to 90%, relative, noncondensing Storage humidity 10% to 90%, relative, noncondensing Acoustic Noise and Mean Time Between Failure (MTBF)Fan (number) Fanless Acoustic noise N/A MTBF @ 25°C (hours) 706983 Warranty Limited lifetime with next business day advance replacement Package contents Cisco Business 350 Series Managed Switch Power adapter Mounting Kit Quick Start Guide Minimum Requirements Web browser: Chrome, Firefox, Edge, Safari Category 5e Ethernet network cable TCP/IP, network adapter, and network operating system (such as Microsoft Windows, Linux, or Mac OS X) installed (tonerpartner.cz)

TP-Link switch TL-SG116 TP-Link switch TL-SG116 je stolní switch, který zvyšuje rychlost vašeho síťového serveru a páteřních připojení. Klíčové vlastnosti 16 portů RJ45 s automatickou adaptací 10/100/1000Mb/s podporujících Auto-MDI/MDIX Technologie Green Ethernet šetří spotřebu energie Řízení toku IEEE 802.3x zajišťuje spolehlivý přenos dat Ocelové pouzdro, desktopová konstruce nebo konstrukce s upevněním na stěnu Podpora 802.1p / DSCP QoS a funkce IGMP Snooping Zapoj a hraj, bez nutnosti konfigurace Technické specifikace Hardware Features Standards and Protocols: IEEE 802.3i /802.3u /802.3ab /802.3x /802.1p Interface: 16 10/100/1000Mbps Ports, Auto-Negotiation, Auto-MDI/MDIX Fan Quantity: Fanless Physical Security Lock: Yes External Power Supply: External Power Adapter (Output: 12VDC / 1.0A) LED Indicator: System Power, Link/Act indicators per port built into each RJ-45 port Dimensions ( W x D x H ): 11.26 x 4.4 x 1.0 in. (286*111.7*25.4 mm) Max Power Consumption: 10W(220V/50Hz) Max Heat Dissipation: 34.12BTU/h Performance Packet Forwarding Rate: 23.8Mpps MAC Address Table: 8K Packet Buffer Memory: 4.1Mb Jumbo Frame: 10KB Software Features Advanced Features: Green Technology, 802.3X Flow Control, 802.1p/DSCP QoS, IGMP Snooping Transfer Method: Store and Forward Others Certification: CE, FCC ,RoHS Environment: Operating Temperature: 0°C 40°C (32°F 104°F), Storage Temperature: -40°C 70°C (-40°F 158°F), Operating Humidity: 10% 90%, non-condensing, Storage Humidity: 5% 90% non-condensing Obsah balení 16-Port 10/100/1000Mbps Desktop Switch Power Adapter Installation Guide Rubber Feet (tonerpartner.cz)

TP-Link switch TL-SG1016 - 16portový gigabitový rackový switch Kód produktu: 6935364020095 Přechod na síť standardu Gigabit Ethernet je s TL-SG1016 snadný. Využijte 16 portů s funkcí Auto MDI/MDIX, které umožňují zapojit a používat bez starostí o typ kabelu. Ekologické řešení pro vaši podnikovou síť Inovativní technologie úspory energie snižuje spotřebu energie až o 40 %. TL-SG1016 je tak ekologické řešení pro vaši podnikovou síť. Vysoký výkon a široká kompatibilita Switch TL-SG1016 podporuje automatické učení adres MAC a Auto MDI/MDIX. Díky tomu je kompatibilní s širokým spektrem zařízení a zajišťuje vysoký výkon sítě. Technické specifikace Standardy a protokoly: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x Rozhraní: 16 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Síťová média: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m); 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Spotřeba: Maximum: 9.26W (220V/50Hz) Rozměry: 17.3*7.1*1.7 in. (440*180*44 mm) Přepínací kapacita: 32Gbps Obsah balení TP-Link switch TL-SG1016 Napájecí kabel Instalační manuál Montážní kit Gumové nožičky (tonerpartner.cz)

TP-Link switch TL-SG1016D, 16xGbE RJ45 EAN: 6935364020613 Přehled TP-Link switch TL-SG1016D je 16portový gigabitový switch. Je ideální pro snadný přechod na síť standardu Gigabit Ethernet. Vlastnosti Všech 16 portů podporuje funkci Auto MDI/MDIX. Inovativní technologie úspory energie snižuje spotřebu až o 40%. Ekologické řešení pro vaši podnikovou síť. Technické specifikace Standardy a protokoly: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab , IEEE 802.3x Rozhraní: 16 10/100/1000Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) Síťová media: 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) 100BASE-TX/1000BASE-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity: Fanless Power Supply: 100-240VAC, 50/60Hz Power Consumption: Maximum: 9.26W (220V/50Hz) Dimensions: 11.6*7.1*1.7 in. (294*180*44 mm) Max Power Consumption: 9.26W(220V/50Hz) Max Heat Dissipation: 31.60BTU/h Výkon Switching Capacity: 32Gbps Packet Forwarding Rate: 23.8Mpps MAC Address Table: 8K Jumbo Frame: 10KB Transfer Method: Store-and-Forward Certifikace FCC, CE, RoHs Balíček obsahuje 16-Port Gigabit Desktop/Rackmount Switch Power Cord Installation Guide Rackmount Kits Rubber Feet Provozní prostředí Operating Temperature: 0° 40° (32° 104°); Storage Temperature: -40° 70° (-40° 158°); Operating Humidity: 10% 90% non-condensing; Storage Humidity: 5% 90% non-condensing (tonerpartner.cz)

TP-Link JetStream switch TL-SG2218 16portový gigabitový inteligentní switch JetStream s 2 SFP sloty Plně gigabitové porty - 16 gigabitových portů RJ45 a 2 porty SFP poskytují vysokorychlostní připojení. Integrováno do platformy Omada SDN - Funkce ZTP (Zero-Touch Provisioning)*, centralizovaná cloudová správa a inteligentní monitorování. Centralizovaná správa - Cloudový přístup a aplikace Omada pro maximální pohodlí a snadnou správu. Statické směrování - Pomáhá směrovat tok dat po lokální síti, čímž zajišťuje efektivní využívání síťových prostředků. Robustní strategie zabezpečení - Funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius a další funkce. Optimalizovaný přenos hlasu a videa v aplikacích - L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa - Webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image přináší pokročilé možnosti správy. Stránky produktu: https://www.tp-link.com/cz/business-networking/omada-sdn-switch/tl-sg2218/ Technické specifikace HARDWARE FEATURES Interface • 16× 10/100/1000 Mbps RJ45 Ports • 2× Gigabit SFP Slots Fan Quantity Fanless Power Supply 100-240 V AC 50/60 Hz Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 12.3 W (220 V/50 Hz) Max Heat Dissipation 41.97 BTU/hr PERFORMANCE Switching Capacity 36 Gbps Packet Forwarding Rate 26.8 Mpps MAC Address Table 8K Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, BPDU Protect, Root Protect, Loop Protect • Loopback Detection - Port-based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • Supports 511 (IPv4, IPv6) IGMP groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MVR • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1q Tagged VLAN • MAC VLAN: 12 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - DHCP Snooping - ARP Inspection - IPv4 Source Guard • IPv6-MAC-Port Binding - DHCPv6 Snooping - ND Detection - IPv6 Source Guard • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio/pps control mode • IP/Port/MAC based access control • 802.1X - Port based authentication - Mac based authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication and accountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP • 316 ARP Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through console port, telnet • SNMPv1/v2c/v3 - Trap/Inform - RMON (1, 2, 3, 9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* MIBs • MIB II (RFC1213) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIBs • RMON MIB(RFC1757, rmon 1,2,3,9) MANAGEMENT Omada App Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Cloud Access Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller. Management Features • Web-based GUI • Command Line Interface (CLI) through telnet • SNMPv1/v2c/v3 • SNMP Trap/Inform • RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG2218 Switch • Power Cord • Quick Installation Guide • Rackmount Kit • Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–40 °C (32–104 °F); • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (patro.cz)

TP-Link switch TL-SG116E 16portový gigabitový Easy Smart switch pro snadné rozšíření vaší kabelové sítě. Přednosti produktu 16 10/100/1000Mb/s RJ45 portů pro rychlou a efektivní práci. Zapoj a hraj - bez nutnosti konfigurace. Odolné kovové pouzdro špičkové kvality a profesionálního vzhledu. Inteligentní správa prostřednictvím webového uživatelského rozhraní a stažitelných nástrojů. Zelená technologie pro snižování spotřeby energie. Technické specifikace Standardy a protokoly: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p Rozhraní: 16 10/100/1000Mbps RJ45 Ports, AUTO Negotiation/AUTO MDI/MDIX Síťové médium: 10BASE-T, 100BASE-TX, 1000BASE-T Ventilátor: Bez ventilátoru Napájení: Externí napájecí adaptér (Výstup: 12VDC/1.0A) Rozměry: 11.3 × 4.4 × 1.0 in. (286 × 111.7 × 25.4 mm) Maximální spotřeba energie: 9.19W(220V/50Hz) Maximální odvod tepla: 31.36BTU/h Výkon Přepínací kapacita: 32Gbps Rychlost předávání paketů: 23.81Mpps Tabulka MAC adres: 8K Buffer paměť pro pakety: 4.1Mb Jumbo Frame: 9KB Software Kvalita služeb: Podpora Port-based/802.1p/DSCP priority, 4 priority queues, Rate Limit, Storm Control L2 vlastnosti: IGMP Snooping V1/V2/V3, Static Link Aggregation, Port Mirroring, Cable Diagnostics, Loop Prevention VLAN: Podporuje až 32 VLANů současně (z 4K VLAN ID), MTU/Port/Tag VLAN Přenosová metoda: Store-And-Forward Ostatní Certifikace: FCC, CE, RoHS Balení obsahuje: TL-SG116E, Napájecí kabel, Instalační průvodce, Gumové nožičky Požadavky na systém: Microsoft Windows pro běh Utility Provozní podmínky: Teplota: 0°C 40°C, Vlhkost: 10% 90% nekondenzovaná Skladovací podmínky: Teplota: -40°C 70°C, Vlhkost: 5% 90% nekondenzovaná (tonerpartner.cz)

TP-Link Easy Smart switch TL-SG1016DE Co je to? 16portový gigabitový Easy Smart switch je ideální pro malé a střední podniky. Nabízí snadnou správu sítě a účinné řízení datových toků. Technické specifikace Switch je vybaven standardy a protokoly: IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.1q, IEEE 802.1p. Rozhraní tvoří 16 10/100/1000Mbps RJ45 portů. Je fanless, tedy bez ventilátoru, a je napájen 100-240VAC, 50/60Hz. Maximální spotřeba energie je 11.73W (220V/50Hz). Rozměry switchu jsou 11.6*7.1*1.7 in. (294*180*44 mm). Výhody produktu Monitorování sítě Prioritizace přenosů Funkce VLAN Jednoduché nastavení sítě Připojení plug-and-play Centralizovaná správa všech Easy Smart switchů Obsah balení TP-Link switch TL-SG1016DE Napájecí kabel Instalační průvodce Resource CD Rackmount Kit Gumové nožičky EAN: 6935364021269 (tonerpartner.cz)

TP-Link JetStream switch TL-SG2210MP 10portový gigabitový inteligentní switch JetStream s 8 porty PoE+ Příkon přes PoE až 150 W: 8 portů napájených přes PoE+ vyhovující standardu 802.3at/ af s celkovým napájením až 150W. Plné gigabitové porty: 8 gigabitových portů s napájením přes PoE + a 2 gigabitové SFP sloty poskytují vysokorychlostní připojení. Integrováno do Omada SDN: Zero-Touch Provisioning (ZTP)‡, Centralizovaná správa cloudů a inteligentní monitorování. Centralizovaná správa: Přistup do cloudu a aplikace Omada pro mimořádné pohodlí a snadnou správu. Robustní bezpečnostní strategie: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, ověřování dosahu, a více. Optimalizujte hlasové a video aplikace: L2/L3/L4 QoS a IGMP snooping. Stránky produktu: https://www.tp-link.com/cz/business-networking/omada-sdn-switch/tl-sg2210mp/ Technické specifikace HARDWARE FEATURES Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1x, IEEE 802.1p Interface • 8× 10/100/1000 Mbps RJ45 Ports, all supporting PoE+ (Auto-Negotiation/Auto MDI/MDIX) • 2× 100/1000 Mbps SFP Slots Network Media • 10BASE-T: UTP/STP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP/STP category 5, 5e or above cable (maximum 100m) • 100BASE-FX: MMF, SMF • 1000BASE-X: MMF, SMF Fan Quantity 1 Physical Security Lock Yes Power Supply 100-240V AC, 50/60Hz PoE+ Ports(RJ45) • Standard: 802.3at/af compliant • PoE+ Ports: 8 Ports • Power Supply: 150 W PoE Ports (RJ45) • Standard: 802.3at/af compliant • PoE+ Ports: 8 Ports • PoE Power Budget: 150 W Dimensions ( W x D x H ) 11.6 x 7.1 x 1.7 in (294 x 180 x 44 mm) Mounting Rackmount/Desktop Max Power Consumption • 12.2 W (110 V / 60 Hz with no PD connected) • 173.9 W (110 V / 60 Hz with 150 W PD connected) Max Heat Dissipation • 41.63 BTU/h (with no PD connected) • 539.35 BTU/h (with 150 W PD connected) PERFORMANCE Switching Capacity 20 Gbps Packet Forwarding Rate 14.9 Mpps MAC Address Table 8K Packet Buffer Memory 4.1 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 802.1p CoS/DSCP priority • 8 priority queues • Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control - Port/Flow based Rating Limit • Smoother Performance • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control L2 and L2+ Features • DHCP Relay - DHCP VLAN Relay • DHCP L2 Relay • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection • Flow Control - 802.3x Flow Control • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED L2 Multicast • 511 IPv4, IPv6 shared multicast groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - Static Group Config • Multicast VLAN Registration (MVR) • Multicast Filtering • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config • Limited IP Multicast (256 profiles and 16 entries per profile) IPv6 Support • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP VLAN • VLAN Group - Max. 4K VLAN Groups • 802.1Q tag VLAN • MAC VLAN • Protocol VLAN • GVRP • Voice VLAN Access Control List • Support up to 230 entries • Time-Range - Time Slice - Week Time-Range - Absolute Time-Range - Holiday • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - IP Protocol - TCP Flag - TCP/UDP Source Port - TCP/UDP Destination Port - DSCP/IP TOS • IPv6 ACL • Combined ACL • Rule Operation - Permit/Deny • Policy Action - Mirror - Rate Limit - Redirect - QoS Remark • ACL Rules Binding - Port Binding - VLAN Binding • Actions for flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark Security • AAA • 802.1X - Port based authentication - MAC (Host) based authentication - Authentication Method includes PAP/EAP-MD5 - MAB - Guest VLAN - Support Radius authentication and accountability • IP/IPv6-MAC Binding - 512 Binding Entries - DHCP Snooping - DHCPv6 Snooping - ARP Inspection - ND Detection • IP Source Guard - 253 Entries - Source IP+Source MAC • IPv6 Source Guard - 183 Entries - Source IPv6 Address+Source MAC • DoS Defend • Static/Dynamic/Permanent Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC based access control IPv6 • IPv6 Static Routing and ACL • IPv6 Dual IPv4/IPv6 • IPv6 Interface • Multicast Listener Discovery (MLD) Snooping • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet(v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP Advanced Features • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule MIBs • MIB II (RFC1213) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIBs • RMON MIB(RFC1757, rmon 1,2,3,9) MANAGEMENT Omada App Yes Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Cloud Access Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller (Supported by TL-SG2210MP v1, v3 and above, while is not supported by TL-SG2210MP v2) Management Features • Web-based GUI • Command Line Interface (CLI) through telnet • SNMPv1/v2c/v3 • SNMP Trap/Inform • RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG2210MP • Power Cord • Installation Guide • Rackmount Kit • Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–50 °C (32–122 °F); • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (patro.cz)

TL-SG2428P New JetStream 28-Port Gigabit Smart Switch with 24-Port PoE+ 250 W PoE Budget: 24× 802.3at/af-compliant PoE+ ports with a total power supply of 250 W*. Full Gigabit Ports: 24× gigabit PoE+ ports and 4× gigabit SFP Slots provide high-speed connections. Integrated into Omada SDN: Zero-Touch Provisioning (ZTP)**, Centralized Cloud Management, and Intelligent Monitoring. Centralized Management: Cloud access and Omada app for ultra convenience and easy management. Static Routing: Helps route internal traffic for more efficient use of network resources. Robust Security Strategies: IP-MAC-Port Binding, ACL, Port Security, DoS Defend, Storm control, DHCP Snooping, 802.1X, Radius Authentication, and more. Optimize Voice and Video Applications: L2/L3/L4 QoS and IGMP snooping. IPv6: IPv6 support with dual IPv4/IPv6 stack, MLD snooping, IPv6 neighbor discovery. HARDWARE FEATURES Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE802.3z, IEEE 802.3ad, IEEE 802.3x, IEEE 802.3az, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x Interface • 24× 10/100/1000 Mbps RJ45 Ports (Auto Negotiation/Auto MDI/MDIX) • 4× Gigabit SFP Slots Network Media • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) • 1000BASE-X: MMF, SMF Fan Quantity 2 PoE+ Ports(RJ45) • Standard: 802.3at/af compliant • PoE+ Ports: 24 Ports • Power Supply: 250 W Dimensions ( W x D x H ) 17.3 × 8.7 × 1.73 in (440 × 220 × 44 mm) Mounting Rack Mountable Max Power Consumption • 32.1 W (110 V/ 60 Hz with no PD connected) • 308.6 W (110 V/ 60 Hz with 250 W PD connected) Max Heat Dissipation • 109.53 BTU/h (with no PD connected) • 1052.94 BTU/h (with 250 W PD connected) PERFORMANCE Bandwidth/Backplane 56 Gbps Packet Forwarding Rate 41.7 Mpps MAC Address Table 8K Packet Buffer Memory 4.1 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 802.1p CoS/DSCP priority • 8 priority queues • Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control - Port/Flow based Rating Limit • Smoother Performance • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control L2 and L2+ Features • 16 IP Interfaces - Support IPv4/IPv6 Interface • Static Routing - 32 IPv4/IPv6 Static Routes • DHCP Server • DHCP Relay - DHCP Interface Relay - DHCP VLAN Relay • DHCP L2 Relay • Static ARP • Proxy ARP • Gratuitous ARP • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection • Flow Control - 802.3x Flow Control • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED VLAN • VLAN Group - Max. 4K VLAN Groups • 802.1Q tag VLAN • MAC VLAN • Protocol VLAN • GVRP • Voice VLAN Access Control List • Support up to 230 entries • Time-Range - Time Slice - Week Time-Range - Absolute Time-Range - Holiday • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - IP Protocol - TCP Flag - TCP/UDP Source Port - TCP/UDP Destination Port - DSCP/IP TOS • IPv6 ACL • Combined ACL • Rule Operation - Permit/Deny • Policy Action - Mirror - Rate Limit - Redirect - QoS Remark • ACL Rules Binding - Port Binding - VLAN Binding • Actions for flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark Security • AAA • 802.1X - Port based authentication - MAC (Host) based authentication - Authentication Method includes PAP/EAP-MD5 - MAB - Guest VLAN - (patro.cz)

TP-Link switch TL-SG1428PE Produktové číslo: 6935364072209 Přehled TP-Link switch TL-SG1428PE je 28portový gigabitový Easy Smart switch. Obsahuje 24 portů PoE+ a je plně kompatibilní se zařízeními PoE. Ideální pro IP kamery, přístupové body a IP telefony. Specifikace Porty: 24 porty 10/100/1000 Mbit/s RJ45 PoE+ Bez PoE: 2 porty 10/100/1000 Mbit/s RJ45 SFP sloty: 2 Rozpočet napájení PoE: až 250 W Technologie: QoS a IGMP Snooping Výhody Prioritní režim pro kvalitní provoz citlivých aplikací. Funkce automatického obnovení PoE pro stabilní provoz. Inteligentní řízení spotřeby chrání switch před přetížením. Technické parametry Standardy a protokoly: IEEE 802.3, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3x, IEEE 802.3af, IEEE 802.3at, IEEE 802.1q, IEEE 802.1p Rozměry: 17.3 × 8.7 × 1.73 in (440 × 220 × 44 mm) Počet ventilátorů: 2 Napájení: 100-240V AC, 50/60 Hz Obsah balení TL-SG1428PE Napájecí kabel Instalační průvodce Sada pro montáž do racku Gumové nožičky (tonerpartner.cz)

TP-Link JetStream switch TL-SG3428X Řízený switch JetStream L2+ s 24 gigabitovými porty a 4 10GE SFP+ sloty Bleskurychlé odchozí připojení 10G - 4 sloty SFP+ s rychlostí 10 Gbit/s umožňují vysoce propustné širokopásmové připojení a přepínací kapacitu bez blokování. Gigabitové rychlosti - 24 gigabitových portů RJ45 nabízí vysokorychlostní a spolehlivé spojení s dalšími switchi a zařízeními. Integrováno do platformy Omada SDN - Funkce ZTP (Zero-Touch Provisioning), centralizovaná cloudová správa a inteligentní monitorování. Centralizovaná správa - Cloudový přístup a aplikace Omada pro maximální pohodlí a snadnou správu. Statické směrování - Pomáhá směrovat tok dat po lokální síti, čímž zajišťuje efektivní využívání síťových prostředků. Robustní strategie zabezpečení - Funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius a další funkce. Optimalizovaný přenos hlasu a videa v aplikacích - L2/L3/L4 QoS a funkce IGMP Snooping. Samostatná správa - Webové rozhraní, CLI (konzolový port, Telnet, SSH), SNMP, RMON a funkce Dual Image přináší pokročilé možnosti správy. Stránky produktu: https://www.tp-link.com/cz/business-networking/omada-sdn-switch/tl-sg3428x/#overview Technické specifikace HARDWARE FEATURES Interface • 24× 10/100/1000 Mbps RJ45 Ports • 4× 10G SFP+ Slots • 1× RJ45 Console Port • 1× Micro-USB Console Port Fan Quantity Fanless Power Supply 100-240 V AC 50/60 Hz Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Mounting Rack Mountable Max Power Consumption 23.6 W (110V/60Hz) Max Heat Dissipation 80.353 BTU/h (110 V/60 Hz) PERFORMANCE Switching Capacity 128 Gbps Packet Forwarding Rate 95.23 Mpps MAC Address Table 16 K Packet Buffer Memory 12 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 8 priority queues • 802.1p CoS/DSCP priority • Queue scheduling - SP (Strict Priority) - WRR (Weighted Round Robin) - SP+WRR • Bandwidth Control - Port/Flow based Rating Limiting • Smoother Performance • Action for Flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark L2 and L2+ Features • Link Aggregation - static link aggregation - 802.3ad LACP - Up to 8 aggregation groups, containing 8 ports per group • Spanning Tree Protocol - 802.1d STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter, Root Protect • Loopback Detection - Port based - VLAN based • Flow Control - 802.3x Flow Control - HOL Blocking Prevention • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Tx/Rx/Both L2 Multicast • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - IGMP Authentication • IGMP Authentication • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config - Limited IP Multicast • MVR • Multicast Filtering: 256 profiles and 16 entries per profile VLAN • VLAN Group - Max 4K VLAN Groups • 802.1Q Tagged VLAN • MAC VLAN: 7 Entries • Protocol VLAN: Protocol Template 16, Protocol VLAN 16 • Private VLAN • GVRP • VLAN VPN (QinQ) - Port-Based QinQ - Selective QinQ • Voice VLAN Access Control List • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL -Source IP - Destination IP - Fragment - IP Protocol - TCP Flag - TCP/UDP Port - DSCP/IP TOS - User Priority • Combined ACL • Packet Content ACL • IPv6 ACL • Policy - Mirroring - Redirect - Rate Limit - QoS Remark • ACL apply to Port/VLAN Security • IP-MAC-Port Binding - 512 Entries - DHCP Snooping - ARP Inspection - IPv4 Source Guard: 100 Entries • IPv6-MAC-Port Binding - 512 Entries - DHCPv6 Snooping - ND Detection - IPv6 Source Guard: 100 Entries • DoS Defend • Static/Dynamic Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • 802.1X - Port base authentication - Mac base authentication - VLAN Assignment - MAB - Guest VLAN - Support Radius authentication andaccountability • AAA (including TACACS+) • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC based access control IPv6 • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 ACL • IPv6 Interface • Static IPv6 Routing • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP L3 Features • 16 IPv4/IPv6 Interfaces • Static Routing - 48 static routes • Static ARP - 128 Static Entries • Proxy ARP • Gratuitous ARP • DHCP Server • DHCP Relay - DHCP Interface Relay - DHCP VLAN Relay • DHCP L2 Relay Management • Web-based GUI • Command Line Interface (CLI) through the console port, telnet • SNMP v1/v2c/v3 - Trap/Inform - RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log Advanced Features • Support Omada Hardware Controller (OC200/OC300), Software Controller, Cloud-Based Controller • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule • ZTP (Zero-Touch Provisioning)* MIBs • MIB II (RFC1213) • Interface MIB (RFC2233) • Ethernet Interface MIB (RFC1643) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • RMON MIB (RFC2819) • RMON2 MIB (RFC2021) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIB MANAGEMENT Omada App Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Cloud Access Yes. Requiring the use of OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller. Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller. Management Features • Web-based GUI • Command Line Interface (CLI) through the console port, telnet • SNMP v1/v2c/v3 - Trap/Inform - RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • 802.1ab LLDP/LLDP-MED • DHCP AutoInstall • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • Password Recovery • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG3428X Switch • Power Cord • Quick Installation Guide • Rackmount Kit • Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10/11, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–45 ? (32–113 ?); • Storage Temperature: -40–70 ? (-40–158 ?) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (patro.cz)

TP-Link switch TL-SL1218P 16portový 10/100 Mb/s + 2portový gigabitový switch do racku s 16 porty PoE+ 16 portů RJ45 PoE + 10/100Mb/s, 2 gigabitové porty RJ45 a 1 kombinovaný gigabitový SFP slot. Vysoký výkon PoE napájení, až 30 W pro každý PoE port a 150 W pro všechny PoE porty Přenos dat a napájení až do vzdálenosti 250 m v režimu prodloužení speciálně navrženého pro dohledový systém. Prioritní režim pro porty 1-8, který zaručuje kvalitu citlivých aplikací, jako je například video monitor. Režim izolace umožňuje oddělení provozu klienta jedním kliknutím pro vyšší zabezpečení a výkon. Snadné použití bez nutnosti konfigurace a instalace. Stránky produktu: https://www.tp-link.com/cz/business-networking/unmanaged-switch/tl-sl1218p/ Technické specifikace HARDWARE FEATURES Interface • 16× PoE+ 10/100 Mbps RJ45 Ports • 2× 10/100/1000 Mbps RJ45 Ports • 1× Combo Gigabit SFP Slot Network Media • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • EIA/TIA-568 100Ohm STP (maximum 100m) • 100BASE-TX: UTP category 5, 5e cable (maximum 100m) • EIA/TIA-568 100Ohm (maximum 100m) • 1000BASE-T: UTP category 5, 5e, 6 or above cable (maximum 100m) • EIA/TIA-568 100Ohm (maximum 100m) • 1000BASE-X MMF, SMF Fan Quantity 2 Fans Physical Security Lock Yes Power Supply 100–240V AC, 50/60 Hz PoE+ Ports(RJ45) • Standard: 802.3at/802.3af compliant • PoE Ports: Ports 1–16 • PoE Power Budget: 150 W Dimensions ( W x D x H ) 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Max Power Consumption • 12.71 W (220/50Hz. no PD connected) • 172.8 W (220/50Hz. with 150 W PD connected) Max Heat Dissipation • 43.34 BTU/h (no PD connected) • 589.25 BTU/h (with 150 W PD connected) PERFORMANCE Switching Capacity 7.2 Gbps Packet Forwarding Rate 5.36 Mpps MAC Address Table 8K Jumbo Frame 10 KB SOFTWARE FEATURES Advanced Features • Compatible With IEEE 802.3at/af Compliant PDs • Extend Mode (Up to 250m PoE power supply and data transmission) • Priority Mode • Isolation Mode • Mac Address Auto-Learning And Auto-Aging • IEEE802.3x Flow Control Transmission Method Store-And-Forward OTHERS Certification CE, FCC, RoHS Package Contents • TL-SL1218P • Power Cable • Installation Guide • Two mounting brackets and the fittings Environment • Operating Temperature: 0–50 °C (32–122 °F) • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (patro.cz)

TP-Link switch TL-SL1226P Představujeme vám switch TP-Link TL-SL1226P, který je ideálním řešením pro malé a střední firmy. Tento výkonný switch nabízí 24 portů s rychlostí 10/100 Mb/s a 2 gigabitové porty. Klíčové vlastnosti 24portový 10/100 Mb/s + 2portový gigabitový switch Podpora PoE+ na všech 24 portech Přenos dat a PoE napájení až do vzdálenosti 250 m Prioritní režim pro vysokou kvalitu citlivých aplikací Režim izolace pro vyšší zabezpečení a výkon Plug and play, bez nutnosti konfigurace a instalace Technické specifikace Hardware features Interface: 24× PoE+ 10/100 Mbps RJ45 Ports 2× 10/100/1000 Mbps RJ45 Ports 2× Combo Gigabit SFP Slots Fan Quantity: 2 Fans Physical Security Lock: Yes Power Supply: 100-240 VAC, 50/60 Hz Backup Bandwidth: 8.8 Gbps Packet Forwarding Rate: 6.5472 Mpps Dimensions ( W x D x H ): 17.3 × 7.1 × 1.7 in (440 × 180 × 44 mm) Software features Advanced Features: Compatible With IEEE 802.3at/af Compliant PDs Transmission Method: Store-And-Forward Others Certification: CE, FCC, RoHS Operating Temperature: 0–50 °C (32–122 °F) Pro více informací navštivte stránky produktu. Tento switch je plně kompatibilní s IP kamerami, přístupovými body, IP telefony, počítači, tiskárnami atd. (tonerpartner.cz)

TP-Link JetStream switch TL-SG2008P 8portový gigabitový inteligentní switch JetStream se 4 porty PoE+ TL-SG2008P je plně kompatibilní se zařízeními PoE, jako jsou IP kamery, přístupové body a IP telefony. Lze také použít s kabelovými zařízeními bez PoE k zajištění gigabitových připojení pro zařízení, jako jsou počítače, tiskárny a IPTV. PoE s rozpočtem napájení 62 W - 4 porty PoE+ vyhovující standardu 802.3at/af s celkovým napájecím výkonem 62 W. Plně gigabitové porty - 4 gigabitové porty PoE+ a 4 gigabitové porty bez PoE poskytují vysokorychlostní připojení. Integrováno do platformy Omada SDN - Funkce ZTP (Zero-Touch Provisioning), centralizovaná cloudová správa a inteligentní monitorování Centralizovaná správa - Cloudový přístup a aplikace Omada pro maximální pohodlí a snadnou správu. Robustní strategie zabezpečení - Funkce vázání na adresu IP-MAC, ACL, zabezpečení portů, ochrana proti útokům DoS, funkce Storm Control, funkce DHCP Snooping, ověřování protokolem 802.1X a Radius a další funkce. Optimalizovaný přenos hlasu a videa v aplikacích - L2/L3/L4 QoS a funkce IGMP Snooping. Stránky produktu: https://www.tp-link.com/cz/business-networking/omada-sdn-switch/tl-sg2008p/ Technické specifikace HARDWARE FEATURES Standards and Protocols IEEE 802.3i, IEEE 802.3u, IEEE 802.3ab, IEEE 802.3ad, IEEE 802.3af, IEEE 802.3at, IEEE 802.3x, IEEE 802.1d, IEEE 802.1s, IEEE 802.1w, IEEE 802.1q, IEEE 802.1p, IEEE 802.1x Interface • 8× 10/100/1000 Mbps RJ45 Ports (Ports 1–4 Support 802.3at/af PoE+) • Auto-Negotiation/Auto MDI/MDIX Network Media • 10BASE-T: UTP category 3, 4, 5 cable (maximum 100m) • 100BASE-TX/1000Base-T: UTP category 5, 5e or above cable (maximum 100m) Fan Quantity Fanless Power Supply • External Power Adapter (Output: 53.5 VDC/ 1.31 A) Power Consumption • 7.9 W (220 V/50 Hz) (no PD connected) • 79.2 W (220 V/50 Hz) (with 62 W PD connected) PoE Ports (RJ45) • Standard: 802.3af/at compliant • PoE Ports: 4 Ports • Power Supply: 62 W Dimensions ( W x D x H ) 8.2 x 4.9 x 1.0 in (209 x 126 x 26mm) Max Power Consumption • V1: 69.7 W (220 V/50 Hz) (with 62 W PD connected); 7.9 W (220 V/50 Hz) (no PD connected) • V2: 73.8 W (220 V/50 Hz) (with 62 W PD connected) • V3: 77.3 W (110 V/60 Hz) (with 62 W PD connected) Max Heat Dissipation • V1: 237.82 BTU/hr (220 V/50 Hz) (with 62 W PD connected); 26.95 BTU/hr (220 V/50 Hz) (no PD connected) • V2: 251.84 BTU/hr (220 V/50 Hz) (with 62 W PD connected) • V3: 263.6 BTU/hr (110 V/60 Hz) (with 62 W PD connected) PERFORMANCE Bandwidth/Backplane 16 Gbps MAC Address Table 8k Packet Buffer Memory 4.1 Mbit Jumbo Frame 9 KB SOFTWARE FEATURES Quality of Service • 802.1p CoS/DSCP priority • 8 priority queues • Priority Schedule Mode - SP (Strict Priority) - WRR (Weighted Round Robin) • Queue Weight Config • Bandwidth Control - Port/Flow-based Rating Limit • Smoother Performance • Storm Control - Multiple Control Modes(kbps/ratio) - Broadcast/Multicast/Unknown-Unicast Control L2 and L2+ Features • DHCP Relay - DHCP VLAN Relay • DHCP L2 Relay • Link Aggregation - Static link aggregation - 802.3ad LACP - Up to 8 aggregation groups and up to 8 ports per group • Spanning Tree Protocol - 802.1D STP - 802.1w RSTP - 802.1s MSTP - STP Security: TC Protect, BPDU Filter/Protect, Root Protect • Loopback Detection • Flow Control - 802.3x Flow Control • Mirroring - Port Mirroring - CPU Mirroring - One-to-One - Many-to-One - Flow-Based - Ingress/Egress/Both • Device Link Detect Protocol (DLDP) • 802.1ab LLDP/ LLDP-MED L2 Multicast • 511 IPv4, IPv6 shared multicast groups • IGMP Snooping - IGMP v1/v2/v3 Snooping - Fast Leave - IGMP Snooping Querier - Static Group Config • Multicast VLAN Registration (MVR) • Multicast Filtering • MLD Snooping - MLD v1/v2 Snooping - Fast Leave - MLD Snooping Querier - Static Group Config • Limited IP Multicast (256 profiles and 16 entries per profile) IPv6 Support • IPv6 Dual IPv4/IPv6 • Multicast Listener Discovery (MLD) Snooping • IPv6 neighbor discovery (ND) • Path maximum transmission unit (MTU) discovery • Internet Control Message Protocol (ICMP) version 6 • TCPv6/UDPv6 • IPv6 applications - DHCPv6 Client - Ping6 - Tracert6 - Telnet (v6) - IPv6 SNMP - IPv6 SSH - IPv6 SSL - Http/Https - IPv6 TFTP VLAN • VLAN Group - Max. 4K VLAN Groups • 802.1Q tag VLAN • MAC VLAN • Protocol VLAN • GVRP • Voice VLAN Access Control List • Support up to 230 entries • Time-Range - Time Slice - Week Time-Range - Absolute Time-Range - Holiday • Time-based ACL • MAC ACL - Source MAC - Destination MAC - VLAN ID - User Priority - Ether Type • IP ACL - Source IP - Destination IP - IP Protocol - TCP Flag - TCP/UDP Source Port - TCP/UDP Destination Port - DSCP/IP TOS • IPv6 ACL • Combined ACL • Rule Operation - Permit/Deny • Policy Action - Mirror - Rate Limit - Redirect - QoS Remark • ACL Rules Binding - Port Binding - VLAN Binding • Actions for flows - Mirror (to supported interface) - Redirect (to supported interface) - Rate Limit - QoS Remark Security • AAA • 802.1X - Port-based authentication - MAC (Host) based authentication - Authentication Method includes PAP/EAP-MD5 - MAB - Guest VLAN - Support Radius authentication and accountability • IP/IPv6-MAC Binding - 512 Binding Entries - DHCP Snooping - DHCPv6 Snooping - ARP Inspection - ND Detection • IP Source Guard - 253 Entries - Source IP+Source MAC • IPv6 Source Guard - 183 Entries - Source IPv6 Address+Source MAC • DoS Defend • Static/Dynamic/Permanent Port Security - Up to 64 MAC addresses per port • Broadcast/Multicast/Unicast Storm Control - kbps/ratio control mode • Port Isolation • Secure web management through HTTPS with SSLv3/TLS 1.2 • Secure Command Line Interface (CLI) management with SSHv1/SSHv2 • IP/Port/MAC-based access control Advanced Features • Automatic Device Discovery • Batch Configuration • Batch Firmware Upgrading • Intelligent Network Monitoring • Abnormal Event Warnings • Unified Configuration • Reboot Schedule MIBs • MIB II (RFC1213) • Bridge MIB (RFC1493) • P/Q-Bridge MIB (RFC2674) • Radius Accounting Client MIB (RFC2620) • Radius Authentication Client MIB (RFC2618) • Remote Ping, Traceroute MIB (RFC2925) • Support TP-Link private MIBs • RMON MIB(RFC1757, rmon 1,2,3,9) MANAGEMENT Omada App Yes Centralized Management • Omada Cloud-Based Controller • Omada Hardware Controller (OC300) • Omada Hardware Controller (OC200) • Omada Software Controller Cloud Access Yes (Through OC300, OC200, Omada Cloud-Based Controller, or Omada Software Controller) Zero-Touch Provisioning Yes. Requiring the use of Omada Cloud-Based Controller (Supported by TL-SG2008P v1, v3 and above, while is not supported by TL-SG2008P v2) Management Features • Web-based GUI • Command Line Interface (CLI) through telnet • SNMPv1/v2c/v3 • SNMP Trap/Inform • RMON (1,2,3,9 groups) • SDM Template • DHCP/BOOTP Client • Dual Image, Dual Configuration • CPU Monitoring • Cable Diagnostics • EEE • SNTP • System Log OTHERS Certification CE, FCC, RoHS Package Contents • TL-SG2008P • Power Adapter • Installation Guide • Rubber Feet System Requirements Microsoft Windows 98SE, NT, 2000, XP, Vista™ or Windows 7/8/10, MAC OS, NetWare, UNIX or Linux. Environment • Operating Temperature: 0–40 °C (32–104 °F) • Storage Temperature: -40–70 °C (-40–158 °F) • Operating Humidity: 10–90% RH non-condensing • Storage Humidity: 5–90% RH non-condensing (patro.cz)