Kde se rozmanitost setkává s hodnotou - Katalo.cz

I/O ports and slots 16 SFP 100/1000 Mbps ports8 SFP dual-personality ports; 100/1000BaseX or 100/1000BASET RJ-45 Combo Ports4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 RJ-45 serial console port Power supplies 2 power supply slots1 minimum power supply required (ordered separately) Physical characteristics Dimensions17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height)Weight17.64 lb (8 kg) Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 1.5 MB Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) Performance 1000 Mb Latency < 5 µs10 Gbps Latency < 1.5 µsThroughput 96 MppsRouting/Switching capacity 128 GbpsRouting table size 512 entries (IPv4), 256 entries (IPv6)MAC address table size 16384 entries Reliability MTBF (years) 52.79 Environment Operating temperature 32°F to 113°F (0°C to 45°C)Operating relative humidity 10% to 90%, noncondensingNonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)Nonoperating/Storage relative humidity 5% to 95%, noncondensingAcoustic Low-speed fan: 47.1 dB, High-speed fan: 50.7 dB; ISO 7779 Electrical characteristics Frequency 50/60 HzMaximum heat dissipation 102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC powered units heat dissipation is 130BTU/hr min, 232BTU/hr max.AC voltage 100 - 240 VACDC voltage -48 to -60 VDCCurrent 5 AMaximum power rating 60 WIdle power 30 W Notes Idle power is the actual power consumption of the device with no ports connected.Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated.Power Ratings for AC Power Suppply indicated above.For DC input power, Idle Power is 38W and Max is 68W.DC Max input current is 8A. Units are supplied without a power supply. Customer must buy 1 or 2 JD362A(AC) or JD366A (DC) power supply. Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance Emissions EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A Immunity Generic EN 55024ESD EN300 386 Management IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

Podívejte se také Tenda TEG1050F Gigabit Switch with SFP (TEG1050F)

HPE FlexNetwork 5130 24G 4SFP+ 1-slot HI Switch (Must select min 1 power supply) JH323A RENEW

Podívejte se také Tenda TEG1024F Gigabit Fanless Rackmount Switch + SFP (TEG1024F)

I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 RJ-45 serial console port Physical characteristics Dimensions17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height)Weight11.02 lb (5 kg) Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 1.5 MB Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) Performance 1000 Mb Latency< 5 µs10 Gbps Latency< 1.5 µsThroughput 96 MppsRouting/Switching capacity 128 GbpsRouting table size 512 entries (IPv4), 256 entries (IPv6)MAC address table size 16384 entries Reliability MTBF (years) 98.1 Environment Operating temperature 32°F to 113°F (0°C to 45°C)Operating relative humidity 10% to 90%, noncondensingNonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)Nonoperating/Storage relative humidity 5% to 95%, noncondensingAcoustic High-speed fan: 39.7 dB; ISO 7779 Electrical characteristics Frequency 50/60 HzMaximum heat dissipation 64/88 BTU/hr (67.52/92.84 kJ/hr)AC voltage 100-240 VACCurrent 2 AMaximum power rating 26 WIdle power 19 W Notes Idle power is the actual power consumption of the device with no ports connected.Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance Emissions EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A Immunity Generic EN 55024ESD EN300 386 Management IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office. HPE FlexNetwork 5130 24G 4SFP+ EI Switch (JG932A) I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 RJ-45 serial console port Physical characteristics Dimensions 17.32(w) x 6.3(d) x 1.72(h) in (44 x 16 x 4.36 cm) (1U height) Weight 11.02 lb (5 kg) Memory and processor 1 GB SDRAM, 512 MB flash; packet buffer size: 1.5 MB Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) Performance IPv6 Ready Certified 1000 Mb Latency < 5 µs 10 Gbps Latency < 3 µs Throughput 96 Mpps Routing/Switching capacity 128 Gbps Routing table size 512 entries (IPv4), 256 entries (IPv6) MAC address table size 16384 entries Environment Operating temperature 23°F to 113°F (-5°C to 45°C) Operating relative humidity 10% to 90%, noncondensing Non-operating/Storage temperature -40°F to 158°F (-40°C to 70°C) Non-operating/Storage relative humidity 5% to 95%, noncondensing Acoustic High-speed fan: 39.7 dB; ISO 7779 Electrical characteristics Frequency 50/60 Hz Maximum heat dissipation 64/88 BTU/hr (67.52/92.84 kJ/hr) Voltage 100 - 240 VAC, rated Current 2 A Maximum power rating 26 W Idle power 19 W Notes - Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance Emissions EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A Immunity Generic EN 55024 ESD EN300 386 Management IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office.

Podívejte se také Microsoft Surface 127W Power Supply (US7-00019)

• Vřeteno osudu (978-80-747-5130-1)
• CUDY 4-Port Gigabit Industrial Switch with 2 Gigabit SFP Port (IG1004S2)
• CUDY 24-Port Gigabit PoE+ Switch with 2 SFP ports 300W (GS1028PS2)
• CUDY 8-Port Gigabit Industrial Switch with 2 Gigabit SFP Port (IG1008S2)
• CUDY 16-Port 10/100M PoE+ Switch with 1Gigabit Uplink and 1 Gigabit Combo SFP Port 200W (FS1018PS1 )
• CUDY 4-Port Gigabit Industrial PoE Switch with 2 Gigabit SFP Port (IG1004S2P)
• HP Desktop 65w Mini Power Supply Kit (L2X04AA#ABB)
• 1 2 Switch - Nintendo Switch (045496420185)
• Tetra Min 1 l (4004218708914)
• EVGA 850 GQ Power Supply UK (210-GQ-0850-V3)
• Elektrobock PT04-EI (0645)
• HPE MicroServer Gen10+ (P16006-421)
• HPE MicroServer Gen10+ (P18584-421)
• HPE ML30 Gen10+ (P44718-421)
• Tetra Repto Min 1 l (4004218204270)
• Target - darts Šipky steel PHIL TAYLOR POWER 9ZERO - 24g (75560)
• Vention 4-Port USB 3.0 Hub with Power Supply 0.15m Black (CHLBB)
• Vention 4-Port USB 2.0 Hub with Power Supply 0.15m Black (CHMBB)
• Vention 4-Port USB 2.0 Hub with Power Supply 1m Black (CHMBF)
• SCANGRIP POWER SUPPLY 25 W - napájecí zdroj pro světla LINE LIGHT (03.5229)

Aruba 6000 24G Class4 PoE 4SFP 370W Switch RENEW R8N87A EAN: 726316 Specifikace Porty: 24x 10/100/1000BASE-T Ports SFP porty: 4x 1G/10G PoE: Podporuje IEEE 802.3af, 802.3at USB porty: 1x USB-C Console Port, 1x USB Type-A Host port Zdroj energie a fyzické vlastnosti Zdroj energie: Pevný, až 370W třídy 4 PoE Ventilátory: Pevné Rozměry: 4.39 cm (V) x 44.2 cm (Š) x 26.82 cm (H) Hmotnost: 4.19 kg Technické parametry Procesor: Dual Core ARM Cortex A9 @ 1016 Mhz Paměť: 4 GB DDR3, 16 GB eMMC Packet Buffer: 12.38MB Kapacita přepínání: 56 Gbps Průchodová kapacita: 41.6 Mpps Prostředí Provozní teplota: 0°C do 45°C Relativní vlhkost při provozu: 15% až 95% při 40°C Maximální provozní výška: 3000 metrů Elektrické vlastnosti Frekvence: 50 / 60 Hz AC napětí: 100-127 VAC / 200-240 VAC Proud: 4.6 A / 2.3 A Bezpečnost a certifikace Bezpečnost: UL 60950-1; IEC 60950-1; EN 60950-1 Emise: VCCI-CISPR 32, Class A Montáž a skříň Montuje se do standardního 19-palcového telco racku nebo skříně pro zařízení (k dispozici montážní sada); montáž na vodorovnou plochu; montáž na stěnu.

Objev podobné jako HPE Aruba Networking CX 6000 24G Class4 PoE 4SFP 370W Switch RENEW R8N87A

HPE FlexNetwork 5140 24G PoE+ 4SFP+ EI Switch JL827A RENEWThe HPE FlexNetwork 5140 EI Switch Series comprises Gigabit Ethernet switches that support static, OSPF and RIP Layer 3 routing, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet. Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series. HPE FlexNetwork 5140 48G 4SFP+ EI Switch (JL829A) I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 RJ-45 serial console port Physical characteristics Dimensions 17.32(w) x 9.04(d) x 1.72(h) in (44 x 23 x 4.36 cm) (1U height) Weight 7.72 lb (3.5 kg) Memory and processor 512 MB SDRAM, 256 MB flash Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) Performance IPv6 Ready Certified 1000 Mb Latency < 5 µs 10 Gbps Latency < 3 µs Throughput 131 Mpps Routing/Switching capacity 176 Gbps Routing table size 1024 entries MAC address table size 16384 entries Environment Operating temperature 23°F to 113°F (-5°C to 45°C) Operating relative humidity 10% to 90%, noncondensing Non-operating/Storage temperature -40°F to 158°F (-40°C to 70°C) Non-operating/Storage relative humidity 5% to 95%, noncondensing Acoustic Low-speed fan: 42.2 dB, High-speed fan: 49.3 dB; ISO 7779 Electrical characteristics Frequency 50/60 Hz Maximum heat dissipation 130/153 BTU/hr (137.15/161.42 kJ/hr), For AC powered units. For DC powered units heat dissipation is 130 BTU/hr min, 171 BTU/hr max Voltage 100 - 240 VAC -48 to -60 VDC Current 10 A Maximum power rating 44 W Idle power 38 W Notes: - Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. - Power ratings for AC power indicated above. Current used is 5A Max when DC Power used. For DC input power, idle power is 38W, maximum DC power used is 50W. Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance Emissions FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 Immunity Generic EN 55024 ESD EN300 386 Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. HPE FlexNetwork 5140 24G PoE+ 4SFP+ (370W) EI Switch (JL827A ) I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T) with 4 combo ports (RJ-45 or SFP); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only Additional ports and slots 1 RJ-45 serial console port Physical characteristics Dimensions 17.32(w) x 10.24(d) x 1.72(h) in (44 x 26 x 4.36 cm) (1U height) Weight 17.64 lb (8 kg) Memory and processor 512 MB SDRAM, 256 MB flash Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) Performance IPv6 Ready Certified 1000 Mb Latency < 5 µs 10 Gbps Latency < 3 µs Throughput 95 Mpps Routing/Switching capacity 128 Gbps Routing table size 1024 entries MAC address table size 16384 entries Environment Operating temperature 23°F to 113°F (-5°C to 45°C) Operating relative humidity 10% to 90%, noncondensing Non-operating/Storage temperature -40°F to 158°F (-40°C to 70°C) Non-operating/Storage relative humidity 5% to 95%, noncondensing Acoustic Low-speed fan: 44.4 dB, High-speed fan: 53.6 dB; ISO 7779 Electrical characteristics Frequency 50/60 Hz Maximum heat dissipation 102/1569 BTU/hr (107.61/1655.29 kJ/hr), for AC Power. For DC Power min heat dissipation is 85 BTU/hr and max heat dissipation is 2695 BTU/hr Voltage 100 - 240 VAC, -54 to -57 VDC Current 10 A Maximum power rating 451 W Idle power 30 W PoE power 370 W PoE+ Notes: - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply. When supplemented with the use of an HPE RPS1600 Redundant Power System, up to 740 W of PoE+ can be supplied. - Max current rating for DC power is 25A. AC Input power is 30W typical, and 460W max(including 370W PoE+ consumption. DC Input voltage range is -54 to -57VDC. Total DC input power is 25W Typical and 790W with 740W PoE+ Power consumption. DC Input voltage range is -54VDC to -57VDC. DC Input Source is the HPE RPS1600. Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance Emissions FCC Part 15 Subpart CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 Immunity Generic EN 55024 ESD EN300 386 Management IMC - Intelligent Management Center; SmartMC; command-line interface; Web browser; SNMP Manager. Services Refer to the Hewlett Packard Enterprise website at http://www.hpe.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local Hewlett Packard Enterprise sales office. Models HPE FlexNetwork 5140 24G POE+2SFP+2XGT EI Switch JL823A HPE FlexNetwork 5140 48G PoE+ 4SFP+ EI Switch JL824A HPE FlexNetwork 5140 48G POE+ 2SFP+ 2XGT EI Switch JL825A HPE FlexNetwork 5140 24G SFP w/8G Combo 4SFP+ EI Switch JL826A HPE FlexNetwork 5140 24G PoE+ 4SFP+ EI Switch JL827A HPE FlexNetwork 5140 24G 4SFP+ EI Switch JL828A HPE FlexNetwork 5140 48G 4SFP+ EI Switch JL829A HPE FlexNetwork 5140 24G 2SFP+ 2XGT EI Switch R8J41A HPE FlexNetwork 5140 8G 2SFP 2GT Combo EI Switch R8J42A Key features Gigabit Ethernet access switch with static layer 3 routing, RIP, high density 10GbE uplinks and POE+ models for voice, video and wireless IRF technology that enables plug-and-play device aggregation and link aggregation across multiple devices Embedded network management capabilities at no additional cost with Smart Management Centre (SmartMC) Energy-saving green design features such as automatic switching of idle ports to energy-saving mode and powering down unused ports Standard Features Software-defined networking OpenFlow Supports OpenFlow 1.3 specification to enable SDN by allowing separation of the data (packet forwarding) and control (routing decision) paths Quality of Service (QoS) Broadcast control Allows limitation of broadcast traffic rate to cut down on unwanted network broadcast traffic Advanced classifier-based QoS Classifies traffic using multiple match criteria based on Layer 2, 3, and 4 information; applies QoS policies such as setting priority level and rate limit to selected traffic on a port, VLAN, or whole switch Powerful QoS feature Supports the following congestion actions: strict priority (SP) queuing, weighted round robin (WRR), and SP+WRR Traffic policing Supports Committed Access Rate (CAR) and line rate Connectivity Auto-MDIX Automatically adjusts for straight-through or crossover cables on all 10/100/1000 ports Flow control Provides back pressure using standard IEEE 802.3x, reducing congestion in heavy traffic situations High-density connectivity Provides up to 48 fixed 10/100/1000BASE-T ports in a Layer 2/Layer 3 switch IEEE 802.3at Power over Ethernet (PoE+) support Simplifies deployment and dramatically reduces installation costs by helping to eliminate the time and cost involved in supplying local power at each access point location Ethernet operations, administration and maintenance (OAM) Detects data link layer problems that occurred in the "last mile" using the IEEE 802.3ah OAM standard; monitors the status of the link between two devices Resiliency and high availability Separate data and control paths Separate control from services and keeps service processing isolated; increases security and performance External redundant power supply Provides high reliability Smart link Allows 100 ms failover between links Spanning Tree/MSTP, RSTP, PVST+, RPVST+ Link redundancy with support for protocols such as Multiple Spanning Tree Protocol (MSTP), Rapid Spanning Tree Protocol (RSTP), Per-VLAN Spanning Tree (PVST+), Rapid Per-VLAN Spanning Tree (RPVST+), Equal-Cost Multipath (ECMP), and Smart Link provides high availability Intelligent Resilient Fabric (IRF) Creates virtual resilient switching fabrics, where two or more switches perform as a single L2 switch and L3 router; switches do not have to be co-located and can be part of a disaster-recovery system; servers or switches can be attached using standard LACP for automatic load balancing and high availability; can eliminate the need for complex protocols like Spanning Tree Protocol, (), or VRRP, thereby simplifying network operation Layer 3 routing Static IP routing Provides manually configured routing for both IPv4 and IPv6 networks Open Shortest Path First (OSPF) An Interior Gateway Protocol (IGP) that uses a link state routing algorithm; supports OSPFv1/v2 and OSPFv3 Routing Information Protocol (RIP) Uses a distance vector algorithm with UDP packets for route determination; supports RIPv1 and RIPv2 routing; includes loop protection Management Remote configuration and management Enables configuration and management through a secure Web browser or a CLI located on a remote device Manager and operator privilege levels Provides read-only (operator) and read/write (manager) access on CLI and Web browser management interfaces Command authorization Leverages HWTACACS to link a custom list of CLI commands to an individual network administrator's login; also provides an audit trail Secure Web GUI Provides a secure, easy-to-use graphical interface for configuring the module via HTTPS Multiple configuration files Stores easily to the flash image Complete session logging Provides detailed information for problem identification and resolution Remote monitoring (RMON) Uses standard SNMP to monitor essential network functions; supports events, alarm, history, and statistics group plus a private alarm extension group IEEE 802.1AB Link Layer Discovery Protocol (LLDP) Advertises and receives management information from adjacent devices on a network, facilitating easy mapping by network management applications sFlow (RFC 3176) Provides scalable ASIC-based wirespeed network monitoring and accounting with no impact on network performance; this allows network operators to gather a variety of sophisticated network statistics and information for capacity planning and real-time network monitoring purposes Management VLAN Segments traffic to and from management interfaces, includingCLI/telnet, a Web browser interface, and SNMP Remote intelligent mirroring Mirrors ingress ACL-selected traffic from a switch port or VLAN to a local or remote switch port anywhere on the network Device Link Detection Protocol (DLDP) Monitors a cable between two compatible switches and shuts down the ports on both ends if the cable is broken, which prevents network problems such as loops IPv6 management Provides future-proof networking because the switch is capable of being managed whether the attached network is running IPv4 or IPv6; supports pingv6, tracertv6, Telnetv6, TFTPv6, DNSv6, syslogv6, FTPv6, SNMPv6, DHCPv6, and RADIUS for IPv6 Troubleshooting Ingress and egress port monitoring enables network problem-solving; virtual cable tests provide visibility into cable problems Smart Management Center (SmartMC) Embedded network management tool with a web-based GUI to simplify operations and facilitate centralized management. It is made available at no additional cost and offers centralized configuration backup, software version management and seamless switch replacement. HPE Intelligent Management Center (IMC) Integrates fault management, element configuration, and network monitoring from a central vantage point; built-in support for third-party devices enables network administrators to centrally manage all network elements with a variety of automated tasks, including discovery, categorization, baseline configurations, and software images; the software also provides configuration comparison tools, version tracking, change alerts, and more Network Management SNMP v1/v2c/v3, MIB-II with Traps, and RADIUS Authentication Client MIB (RFC 2618); embedded HTML management tool with secure access Security Access control lists (ACLs) Provides IP Layer 2 to Layer 4 traffic filtering; supports global ACL, VLAN ACL, port ACL, and IPv6 ACL IEEE 802.1X Industry-standard method of user authentication using an IEEE 802.1X supplicant on the client in conjunction with a RADIUS server MAC-based authentication Client is authenticated with the RADIUS server based on the client's MAC address Identity-driven security and access control - Per-user ACLs Permits or denies user access to specific network resources based on user identity and time of day, allowing multiple types of users on the same network to access specific network services without risking network security or providing unauthorized access to sensitive data - Automatic VLAN assignment Automatically assigns users to the appropriate VLAN based on their identities Secure management access Delivers secure encryption of all access methods (CLI, GUI, or MIB) through SSHv2, SSL, HTTPS and/or SNMPv3 Secure FTP/ SCP Allows secure file transfer to and from the switch; protects against unwanted file downloads or unauthorized copying of a switch configuration file Guest VLAN Provides a browser-based environment to authenticated clients that is similar to IEEE 802.1X Port security Allows access only to specified MAC addresses, which can be learned or specified by the administrator Port isolation Secures and adds privacy, and prevents malicious attackers from obtaining user information STP BPDU port protection Blocks Bridge Protocol Data Units (BPDUs) on ports that do not require BPDUs, preventing forged BPDU attacks STP root guard Protects the root bridge from malicious attacks or configuration mistakes DHCP protection Blocks DHCP packets from unauthorized DHCP servers, preventing denial-of-service attacks IP source guard Helps prevent IP spoofing attacks Dynamic ARP protection Blocks ARP broadcasts from unauthorized hosts, preventing eavesdropping or theft of network data RADIUS/HWTACACS Eases switch management security administration by using a password authentication server Performance Nonblocking architecture Up to 176 Gb/s nonblocking switching fabric provides wirespeed switching with up to 130.9 Mpps throughput Hardware-based wirespeed access control lists (ACLs) Help provide high levels of security and ease of administration without impacting network performance with a feature-rich TCAM-based ACL implementation Device support Prestandard PoE Support Detects and provides power to prestandard PoE devices such as wireless LAN access points and IP phones Convergence IEEE 802.1AB Link Layer Discovery Protocol (LLDP) Facilitates easy mapping using network management applications with LLDP automated device discovery protocol LLDP-MED Is a standard extension that automatically configures network devices, including LLDP-capable IP phones LLDP-CDP compatibility Receives and recognizes CDP packets from Cisco's IP phones for seamless interoperation IEEE 802.3at Power over Ethernet (PoE+) Provides up to 30 W per port that allows support of the latest PoE+-capable devices such as IP phones, wireless access points, and security cameras, as well as any IEEE 802.3af-compliant end device; eliminates the cost of additional electrical cabling and circuits that would otherwise be necessary in IP phone and WLAN deployments PoE allocations Supports multiple methods (automatic, IEEE 802.3af class, LLDP-MED, or user-specified) to allocate PoE power for more efficient energy savings Voice VLAN Automatically assigns VLAN and priority for IP phones, simplifying network configuration and maintenance IP multicast snooping (data-driven IGMP) Prevents flooding of IP multicast traffic Additional information Green IT and power Improves energy efficiency through the use of the latest advances in silicon development; shuts off unused ports and utilizes variable-speed fans, reducing energy costs Green initiative support Provides support for RoHS and WEEE regulations Unified Hewlett Packard Enterprise Comware operating system with modular architecture Provides an easy-to-enhance-and-extend feature set, which doesn't require whole-scale changes; all switching, routing, and security platforms leverage the Comware OS, a common unified modular operating system Energy Efficient Ethernet (EEE) Support Reduces power consumption in accordance with IEEE 802.3az Layer 2 switching 16K MAC address table Provides access to many Layer 2 devices VLAN support and tagging Supports IEEE 802.1Q with 4,094 simultaneous VLAN IDs IEEE 802.1ad QinQ and selective QinQ Increase the scalability of an Ethernet network by providing a hierarchical structure; connect multiple LANs on a high-speed campus or metro network 10GbE port aggregation Allows grouping of ports to increase overall data throughput to a remote device Device Link Detection Protocol (DLDP) Monitors link connectivity and shuts down ports at both ends if unidirectional traffic is detected, preventing loops in STP-based networks Jumbo Frame Support Improves the performance of large data transfers; supports frame size of up to 9K-bytes Layer 3 services Address Resolution Protocol (ARP) Determines the MAC address of another IP host in the same subnet; supports static ARPs; gratuitous ARP allows detection of duplicate IP addresses; proxy ARP allows normal ARP operation between subnets or when subnets are separated by a Layer 2 network Dynamic Host Configuration Protocol (DHCP) Simplifies the management of large IP networks; supports client; DHCP Relay enables DHCP operation across subnets Loopback interface address Defines an address that can always be reachable, improving diagnostic capability User Datagram Protocol (UDP) helper function Allows UDP broadcasts to be directed across router interfaces to specific IP unicast or subnet broadcast addresses and prevents server spoofing for UDP services such as DHCP Route maps Provide more control during route redistribution; allow filtering and altering of route metrics DHCP server Centralizes and reduces the cost of IPv4 address management Warranty and support Limited Lifetime Warranty See Warranty check for warranty and support information included with your product purchase. Software releases To find software for your product, refer to http://www.hpe.com/networking/support; for details on the software releases available with your product purchase, refer to Warranty check

Objev podobné jako HPE FlexNetwork 5140 24G PoE+ 4SFP+ EI Switch JL827A RENEW

Aruba 6000 48G 4SFP Switch R8N86AR RENEW EAN: 726354 Zvyšte výkon sítě s Aruba 6000 48G 4SFP Switch. Tento přepínač je ideální pro náročné sítě. Specifikace portů Přepínač Aruba 6000 48G 4SFP je vybaven 48x porty 10/100/1000BASE-T a 4x 1G/1G SFP porty. Dále obsahuje 1x USB-C Console Port a 1x USB Type-A Host port pro snadné připojení a správu. Dimenze a hmotnost Aruba 6000 48G 4SFP má rozměry 4.39 cm x 44.2 cm x 24.74 cm a váží 3.42 kg. Je kompaktní a lehký pro snadnou instalaci a přenos. Výkon a kapacita Přepínač má dvojjádrový procesor ARM Cortex A9 s frekvencí 1016 Mhz, 4 GB DDR3 paměť a 16 GB eMMC flash paměť. Jeho přepínací kapacita je 104 Gbps a propustnost 77.3 Mpps. Bezpečnost a regulace Aruba 6000 48G 4SFP splňuje bezpečnostní standardy UL 60950-1, IEC 60950-1, EN 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60825-1, UL 62368-1 Ed. 2, IEC 62368-1 Ed. 2, EN 62368-1:2014. Provozní podmínky Aruba 6000 48G 4SFP může pracovat v teplotách od 0°C do 45°C a relativní vlhkosti od 15% do 95% při teplotě 40°C. Elektrické charakteristiky Přepínač pracuje na frekvenci 50/60 Hz, napětí 100-127 VAC / 200-240 VAC a proud 0.8 A / 0.5 A. Spotřeba energie v klidu je 20.6W a maximální spotřeba (bez PoE) je 44.2W. Klíčové vlastnosti 48x porty 10/100/1000BASE-T 4x 1G/1G SFP porty USB-C Console Port a USB Type-A Host port Dvojjádrový procesor ARM Cortex A9 s frekvencí 1016 Mhz 4 GB DDR3 paměť a 16 GB eMMC flash paměť Přepínací kapacita 104 Gbps a propustnost 77.3 Mpps Dodáváme s pevnými napájecími zdroji a pevnými ventilátory pro bezproblémový provoz. Aruba 6000 48G 4SFP je ideální pro náročné sítě vyžadující vysoký výkon a spolehlivost.

Objev podobné jako HPE Aruba Networking CX 6000 48G 4SFP Switch R8N86AR RENEW

HPE Networking Comware Switch 24G SFP w/8G Combo 4SFP+ EI 5140 JL826AR RENEW HPE FlexNetwork 5140 24G SFP 4SFP+ EI Switch (JL826A) I/O ports and slots 16 SFP 100/1000 Mbps ports 8 SFP dual-personality ports - 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports 4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 RJ-45 serial console port Power supplies 2 power supply slots 1 minimum power supply required (ordered separately) Physical characteristics Dimensions 17.32(w) x 14.17(d) x 1.72(h) in (44 x 36 x 4.36 cm) (1U height) Weight 13.23 lb (6kg) Memory and processor 512 MB SDRAM, 256 MB flash; Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) Performance IPv6 Ready Certified 1000 Mb Latency < 5 µs 10 Gbps Latency < 3 µs Throughput 95 Mpps Routing/Switching capacity 128 Gbps Routing table size 1024 entries MAC address table size 16384 entries Environment Operating temperature 23°F to 113°F (-5°C to 45°C) Operating relative humidity 10% to 90%, noncondensing Non-operating/Storage temperature -40°F to 158°F (-40°C to 70°C) Non-operating/Storage relative humidity 5% to 95%, noncondensing Acoustic Low-speed fan: 41.4 dB, High-speed fan: 47.7 dB; ISO 7779 Electrical characteristics Frequency 50/60 Hz Maximum heat dissipation 102/204 BTU/hr (107.61/215.22 kJ/hr), for AC Powered units. For DC powered units heat dissipation is 130 BTU/hr min, 232 BTU/hr max. Voltage 100 - 240 VAC -48 to -60 VDC Current 5 A Maximum power rating 60 W Idle power 30 W Notes: - Idle power is the actual power consumption of the device with no ports connected. - Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. - Power Ratings for AC Power Supply indicated above. - For DC input power, Idle Power is 38W and Max is 68W. - DC Max input current is 8A. Units are supplied without a power supply. Customer must buy 1 or 2 JD362B (AC) or JD366B (DC) power supply. Safety UL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; IEC 62368-1; CAN/CSA-C22.2 No. 60950-1; EN 62368-1/A11; FDA 21 CFR Subchapter J; ROHS Compliance Emissions FCC Part 15 Subpart B CLASS A; ICES-003 CLASS A; VCCI-CISPR 32 CLASS A; EN 55032 CLASS; AS/NZS CISPR32 CLASS A; CISPR 24; EN 55024; EN 61000-3-2; EN 61000-3-3; ETSI EN 300 386; GB/T 9254; YD/T 993 Immunity Generic EN 55024 ESD EN300 386 Management IMC - Intelligent Management Center; SmartMC;command-line interface; Web browser; SNMP Manager Ports (16) SFP 100/1000 Mbps ports (8) SFP dual-personality ports - 10/100/1000BASE-T RJ-45 or 100/1000BASE-X Combo Ports (4) SFP+ fixed 1000/10000 SFP+ ports Throughput up to 96 Mpps Routing/switching capacity 128 Gbps PoE capability 370W PoE+ Maximum, depending on model Stacking capabilities IRF 9 switches Management features IMC - Intelligent Management CenterSmartMCCommand-line interfaceWeb browserSNMP manager Input voltage 100 - 240 VAC, rated -48 to -60 VDC, rated (depending on power supply chosen) Power consumption 57 W (maximum) Product dimensions (imperial) 1.72 x 17.32 x 14.17 in Weight 13.23 lbs UNSPSC code 43222612

Objev podobné jako HPE Networking Comware Switch 24G SFP w/8G Combo 4SFP+ EI 5140 JL826AR RENEW

HP 5130-48G-4SFP+ EI Switch HP RENEW 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ fixed 1000/10000 SFP+ ports

Objev podobné jako HPE 5130-48G-4SFP+ EI HP RENEW Switch JG934AR

Záruka na dobu životnosti (99 let) + NBD po celou dobu životnosti + 3-letá 24x7 Softwarová podpora v ceně Rozsáhlá síť servisních středisek HP v ČR a na Slovensku JG936AR Před objednáním si vždy vyžádejte dostupnost (Pokud nejsou skladem u ATC). Podmínky na remarket trhu se mění velmi rychle. Pokud zboží není skladem, negarantujeme dostupnost ani cenu. Přehled - Management: Fully Managed - Layer 3 Dynamic: L2 switching / L3 Static routing / RIP routing - 24x 10/100/1000 RJ45 portů + 4x 1000/10000 SFP+ porty - Budget: 370W PoE+, (IEEE 802.3at) - IRF stacking (až 9 switchů do stohu) - Montáž do 19“ racku. Úchytky jsou součástí balení. I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 RJ-45 serial console port Physical characteristics Dimensions17.32(w) x 11.81(d) x 1.72(h) in (44 x 30 x 4.37 cm) (1U height)Weight17.64 lb (8 kg) Memory and processor 1 GB SDRAM, 128 MB flash; packet buffer size: 1.5 MB Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (hardware included) Performance 1000 Mb Latency < 5 µs10 Gbps Latency < 1.5 µsThroughput 96 MppsRouting/Switching capacity 128 GbpsRouting table size 512 entries (IPv4), 256 entries (IPv6)MAC address table size 16384 entries Reliability MTBF (years) 48.3 Environment Operating temperature 32°F to 113°F (0°C to 45°C)Operating relative humidity 10% to 90%, noncondensingNonoperating/Storage temperature -40°F to 158°F (-40°C to 70°C)Nonoperating/Storage relative humidity 5% to 95%, noncondensingAcoustic Low-speed fan: 49.8 dB, High-speed fan: 52.9 dB; ISO 7779 Electrical characteristics Frequency 50/60 HzMaximum heat dissipation 102/1569 BTU/hr (107.61/1655.29 kJ/hr), for AC Power. For DC Power min heat dissipation is 85BTU/hr and max heat dissipation is 2559 BTU/hrAC voltage 100 - 240 VACCurrent 10 AMaximum power rating 460 WIdle power N/APoE power 370 W PoE+ Notes Maximum power rating and maximum heat dissipation are the worst-case theoretical maximum numbers provided for planning the infrastructure with fully loaded PoE (if equipped), 100% traffic, all ports plugged in, and all modules populated. PoE Power is the power supplied by the internal power supply. When supplemented with the use of an HP RPS1600 Redundant Power System, up to 740 W of PoE+ can be supplied.Max current rating for DC power is 25A. AC Input power is 30W typical, and 460W max(including 370W PoE+ consumption. DC Input voltage range is -54 to -57VDC. Total DC input power is 25W Typical and 790W with 740W PoE+ Power consumption. DC Input voltage range is -54VDC to -57VDC. DC Input Source is the HP RPS1600.SafetyUL 60950-1; EN 60825-1 Safety of Laser Products-Part 1; EN 60825-2 Safety of Laser Products-Part 2; IEC 60950-1; CAN/CSA-C22.2 No. 60950-1; Anatel; ULAR; GOST; EN 60950-1/A11; FDA 21 CFR Subchapter J; NOM; ROHS Compliance Emissions EMC Directive 2004/108/EC; FCC (CFR 47, Part 15) Class A; EN 61000-4-11:2004; ANSI C63.4-2009; EN 61000-3-3:2008; VCCI V-4/2012.04; EN 6100-3-2:2006+A1:2009 + A2:2009; EN 61000-3-2:2006+A1:2009+A2:2009 ; EN 61000-4-3:2006; EN 61000-4-4:2012; EN 61000-4-5:2006; EN 61000-4-6:2009; AS/NZS CISPR 22:2009 Class A; CISPR 22:2008 Class A; EN 55022:2010 Class A; EN 61000-4-29: 2000; CISPR 24:2010; EN 300 386 V1.6.1; VCCI V-3/2013.04 Class A Immunity Generic EN 55024ESD EN300 386 Management IMC - Intelligent Management Center; command-line interface; Web browser; SNMP Manager Services Refer to the HP website at: www.hp.com/networking/services for details on the service-level descriptions and product numbers. For details about services and response times in your area, please contact your local HP sales office.

Objev podobné jako HP 5130-24G-PoE+-4SFP+ (370W) EI Switch HP RENEW JG936A

Aruba 6000 48G Class4 PoE 4SFP 370W Switch EAN: 190017559742 Popis produktu Aruba 6000 48G 4SFP Switch je vybaven 48x porty 10/100/1000BASE-T a 4x 1G/10G SFP porty. Vlastnosti CPU: Dual Core ARM Cortex A9 @ 1016 Mhz Paměť a Flash: 4 GB DDR3 16 GB eMMC Packet Buffer: 12.38MB (4.5MB Ingress/7.875MB Egress) Výkon Aruba 6000 48G 4SFP Switch nabízí přepínací kapacitu 104 Gbps a propustnost 77.3 Mpps. Prostředí Při provozní teplotě 32°F to 113°F (0°C to 45°C) lze tento switch použít až do výšky 5000 ft (1.5 km). Elektrické charakteristiky Frekvence: 50 / 60 Hz AC Napětí: 100-127 VAC / 200-240 VAC Spotřeba energie (230 VAC): Idle: 30.6W Max Power (w/o PoE): 45W Max Power (w/ PoE): 480W Bezpečnost Aruba 6000 48G 4SFP Switch je certifikován dle UL 60950-1; IEC 60950-1; EN 60950-1; CAN/CSA-C22.2 No. 60950-1; EN 60825-1 UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014. Montáž a skříň Aruba 6000 48G 4SFP Switch lze namontovat do standardního 19-palcového telco racku nebo do skříně pro zařízení.

Objev podobné jako HPE Aruba Networking CX 6000 48G Class4 PoE 4SFP 370W Switch

Aruba Instant On 1930 24G 4SFP/SFP+ Switch EAN: 190017355450 Aruba Instant On 1930 24G 4SFP/SFP+ Switch je výkonný switch navržený pro malé podniky. Fyzické vlastnosti Switch má rozměry 17.42(w) x 8.72(d) x 1.73(h) palce a váží 2.41 kg. Výkon S ARM Cortex-A9 @ 800 MHz, 512 MB SDRAM a 256 MB flash dosahuje propustnost 95.23 Mpps a kapacitu 128 Gbps. Spolehlivost MTBF je 158 let. Prostředí Pracuje v teplotách od 0°C do 40°C a vlhkosti 15% až 95% při 40°C. Elektrické vlastnosti Frekvence: 50-60 Hz, napětí: 100-240V, proud: 0.5/0.3 A, maximální výkon: 22.6 W, klidový výkon: 9.3 W. Bezpečnost Switch je certifikovaný dle standardů UL 60950-1, IEC 60950-1,EN 60950-1, CAN/CSA-C22.2 No. 60950-1, EN 60825-1 a dalších. Správa zařízení Aruba Instant On Cloud; Web browser; SNMP Manager Montáž Montuje se do standardu EIA 19 in. telco rack nebo do skříně. Podporuje také stolní, stěnovou a podstolní montáž. Klíčové vlastnosti Chytrý spravovaný switch s vrstvou 2+ PoE pro napájení AP a IoT zařízení Bezpečnostní ovládání pro definování přístupu v síti Pohodlná mobilní aplikace a webové rozhraní pro nastavení a správu Standardní funkce Plug-and-play switchy, které fungují s AP Instant On hned po vybalení Mobilní aplikace pro snadné nastavení, sledování a správu sítě Automatická ochrana před DoS útoky Bez dodatečných licenčních nebo předplatných poplatků Průmyslově nejlepší omezená doživotní záruka a podpora Management Cloudové řízení celé sítě, jednoduché lokální webové GUI řízení, podpora až pěti (5) HTTP a HTTP Secure (HTTPS) relací. Kvalita služby (QoS) Prioritizace provozu, IEEE 802.1p/Q VLAN značení, třída služby (CoS), pokročilý klasifikátor na základě QoS. Bezpečnost sítě TPM-based security, IEEE 802.1Q VLAN support, IEEE 802.1X access control, automatická ochrana před DoS útoky, ochrana před bouří paketů, RADIUS, RADIUS účetnictví, Management VLAN ID, prevence proti Link Flap. Výkon a efektivita Energy Efficient Ethernet (EEE), automatické vypnutí portu, stav úspory energie, energeticky účinné chlazení, bezventilátorový provoz. Switchingové funkce IEEE 802.3x Flow control, Spanning Tree Protocol (STP), ochrana proti smyčkám, BPDU filtrování, podpora Jumbo frame, IGMP snooping v1/v2, Link agregace, LLDP/LLDP-MED (Media Endpoint Discovery), Address Resolution Protocol (ARP). Záruka, servis a podpora Aruba Instant On Limited Lifetime Support poskytuje 24X7 telefonickou podporu po prvních 90 dnech a chatovou podporu po celou dobu záruky. Komunitní podpora je zahrnuta po dobu života produktu.

Objev podobné jako HPE Networking Instant On Switch 24p Gigabit 4p SFP+ 1930 (JL682A)

HPE Networking Comware Switch 48G 4SFP+ EI 5140 The HPE Networking Comware Switch Series 5140 EI comprises Gigabit Ethernet switches that support static, OSPF and RIP Layer 3 routing, convenient fixed 10GbE uplink ports, PoE+, ACLs, IPv6 and delivers energy savings with Energy Efficient Ethernet. Unique Intelligent Resilient Fabric (IRF) technology creates a virtual fabric by managing several switches as one logical device, which increases network resilience, performance, and availability, while reducing operational complexity. These switches provide Gigabit Ethernet access and can be used at the edge of a network or to connect server clusters in small data centers. High availability, simplified management, and comprehensive security control policies are among the key features that distinguish this series. HPE FlexNetwork 5140 48G 4SFP+ EI Switch (JL829A) I/O ports and slots 48 RJ-45 autosensing 10/100/1000 ports (IEEE 802.3 Type 10BASE-T, IEEE 802.3u Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T); Duplex: 10BASE-T/100BASE-TX: half or full; 1000BASE-T: full only 4 SFP+ fixed 1000/10000 SFP+ ports Additional ports and slots 1 RJ-45 serial console port Physical characteristics Dimensions 17.32(w) x 9.04(d) x 1.72(h) in (44 x 23 x 4.36 cm) (1U height) Weight 7.72 lb (3.5 kg) Memory and processor 512 MB SDRAM, 256 MB flash Mounting and enclosure Mounts in an EIA standard 19-inch telco rack or equipment cabinet (Rack Mount Kit R8M91A sold separately) Performance IPv6 Ready Certified 1000 Mb Latency HPE Aruba Networking > Switches - FlexNetwork: 5140 EI Switch Series Transceivers SFP Transceivers Notes: Enter the following menu selections as integrated to the CTO Model X above if order is factory built. Rule # Description SKU HPE Networking X115 100M SFP LC FX Transceiver JD102B HPE Networking X110 100M SFP LC LX Transceiver JD120B HPE Networking X115 100M SFP LC BX 10-U Transceiver JD100A HPE Networking X115 100M SFP LC BX 10-D Transceiver JD101A HPE Networking X120 1G SFP LC SX Transceiver JD118B HPE Networking X120 1G SFP LC LX Transceiver JD119B HPE Networking X120 1G SFP RJ45 T Transceiver JD089B HPE Networking X120 1G SFP LC BX 10-U Transceiver JD098B HPE Networking X120 1G SFP LC BX 10-D Transceiver JD099B HPE Networking X120 1G SFP LC LH100 Transceiver JD103A SFP+ Transceivers Rule # Description SKU HPE Networking X130 10G SFP+ LC SR Transceiver JD092B HPE Networking X130 10G SFP+ LC LR Transceiver JD094B HPE X130 10G SFP+ LC BiDi 10km-Uplink Transceiver JL737A HPE X130 10G SFP+ LC BiDi 10km-Downlink Transceiver JL738A HPE X130 10G SFP+ LC BiDi 40km-Uplink Transceiver JL739A HPE X130 10G SFP+ LC BiDi 40km-Downlink Transceiver JL740A HPE Networking X240 10G SFP+ SFP+ 0.65m DAC Cable JD095C HPE Networking X240 10G SFP+ SFP+ 1.2m DAC Cable JD096C HPE Networking X240 10G SFP+ SFP+ 3m DAC Cable JD097C HPE FlexNetwork X240 10G SFP+ to SFP+ 5m Direct Attach Copper Cable JG081C HPE X2A0 10G SFP+ to SFP+ 7m Active Optical Cable JL290A HPE X2A0 10G SFP+ to SFP+ 10m Active Optical Cable JL291A HPE X2A0 10G SFP+ to SFP+ 20m Active Optical Cable JL292A Cables Multi-Mode Cables Rule # Description SKU HPE LC to LC Multi-mode OM3 2-Fiber 0.5m 1-Pack Fiber Optic Cable AJ833A HPE LC to LC Multi-mode OM3 2-Fiber 1.0m 1-Pack Fiber Optic Cable AJ834A HPE LC to LC Multi-mode OM3 2-Fiber 2.0m 1-Pack Fiber Optic Cable AJ835A HPE LC to LC Multi-mode OM3 2-Fiber 5.0m 1-Pack Fiber Optic Cable AJ836A HPE LC to LC Multi-mode OM3 2-Fiber 15.0m 1-Pack Fiber Optic Cable AJ837A HPE LC to LC Multi-mode OM3 2-Fiber 30.0m 1-Pack Fiber Optic Cable AJ838A HPE LC to LC Multi-mode OM3 2-Fiber 50.0m 1-Pack Fiber Optic Cable AJ839A HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 1m Cable QK732A HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 2m Cable QK733A HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 5m Cable QK734A HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 15m Cable QK735A HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 30m Cable QK736A HPE Premier Flex LC/LC Multi-mode OM4 2 Fiber 50m Cable QK737A Internal Power Supplies HPE X361 150W DC Power Supply Rule # Description SKU 1, 2 HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B Notes: Includes 1 x c13, 150w HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B Notes: C13 PDU Jumper Cord (NA/MEX/TW/JP) HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B Notes: C13 PDU Jumper Cord (ROW) HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B Notes: HPE 2.3m C13 to NEMA 6-15P Pwr Cord(J9936A) HPE X361 150W 100-240VAC to 12VDC Power Supply JD362B Notes: No Localized Power Cord Selected Configuration Rules Rule # Description 1 If #B2E is selected Then replace Localized option with #B2E for power supply and with #B2E for switch . (Offered only in North America, Mexico, Taiwan, and Japan) 2 Localization (Wall Power Cord) required on orders without #B2B, #B2C (PDU Power Cord) . (See Localization Menu)REMARK: When Switches/Routers are Factory Racked, Then #B2B, or #B2C should be the Defaulted Power Cable option on the Switches/Routers. Notes: - Drop down under power supply should offer the following options and results: o Switch/Router/Power Supply to PDU Power Cord - #B2B in North America, Mexico, Taiwan, and Japan or #B2C ROW. (OCA Default B2B or B2C for Rack Level CTO) o Switch/Router/Power Supply to Wall Power Cord - Localized Option (OCA Default for BTO) o High Volt Switch/Router/Power Supply to Wall Power Cord - #B2E Option. (Offered only in North America, Mexico, Taiwan, and Japan) o No Localized Power Cord Selected - #AC3 Option Switch Enclosure Options Rack Mount Kits Rule # Description SKU HPE 5140 Rack Mount Kit R8M91A External/Redundant Power Supplies Rule # Description SKU 2, 3, 5, 6 HPE Networking RPS 800 Redundant Power Supply JD183A Notes: Height = 1U includes 1 x c13, 800w 2, 3, 5 HPE RPS1600 Redundant Power System JG136A Notes: Height = 1U includes 1 x c13, 1600w and Power Supply port 1, 5 HPE RPS1600 1600W AC Power Supply JG137A Notes: Installs into JG136A only Configuration Rules Rule # Description 1 If this power supply is selected, The JG136A - HP A-RPS1600 Redundant Power System must be on order or onsite. 2 Localization required. (See Localization Menu for list.) 3 Only 1 JD183A or JG136A can be connected per switch. 5 Supported on JL827A and JL824A 6 Supported on JL826A only when connected to DC Power Supply JD366B with cable JD186A. External/Redundant Power Cables Rule # Description SKU 1 HPE X290 500 V 1m RPS Cable JD186A 2 HPE X290 1000 A JD5 2m RPS Cable JD187A 3 HPE X290 1000 A JD5 NonPoE 2m RPS Cable JD188A Configuration Rules Rule # Description 1 Supported on JL826A with JD366B to connect to JD183A. 2 Supported on JL829A, JL827A, JL823A, JL825A to connect to JG136A. 3 Supported on JG829A and JL826A to connect to JG136A.

Objev podobné jako HPE Networking Comware Switch 48G 4SFP+ EI 5140 JL829AR RENEW

HPE Aruba Networking CX 6000 24G 4SFP Switch R8N88A RENEW Model Aruba 6000 24G 4SFP Switch (R8N88A) Description 24x ports 10/100/1000BASE-T Ports 4x 1G SFP ports 1x USB-C Console Port 1x USB Type-A Host port Power supplies Fixed power supply Fans Fixed fans Dimensions (H) 4.39 cm (W) 44.2 cm (D) 20.12 cm (1.73" x 17.4" x 7.92") Configuration Weight 2.62 kg (5.78 lbs) CPU Dual Core ARM Cortex A9 @ 1016 Mhz Memory and Flash 4 GB DDR3 16 GB eMMC Packet Buffer 12.38MB (4.5MB Ingress/7.875MB Egress) Model Switching Capacity 56 Gbps Model Throughput Capacity 41.6 Mpps Average Latency (LIFO-64-bytes packets) 1 Gbps: 1.5 µSec Switched Virtual Interfaces (dual stack) 16 IPv4 Host Table (ARP) 1,024 IPv6 Host Table (ND) 512 IPv4 Unicast Routes 512 IPv6 Unicast Routes 512 MAC Table Capacity 8,192 IGMP Groups 512 MLD Groups 512 IPv4/IPv6/MAC ACL Entries (ingress) 256 / 128 / 256 Environment Operating Temperature 32°F to 113°F (0°C to 45°C) up to 5000 ft (1.5 km) derate -1°C for every 1000 ft (305 m) from 5000 ft (1.5 km) to 10000 ft (3.0 km) Operating Relative Humidity 15% to 95% at 104°F (40°C) non-condensing Non-Operating -40°F to 158°F (-40°C to 70°C) up to 15000 ft (4.6 km) Non-Operating Storage Relative Humidity 15% to 90% @ 149°F (65°C) non-condensing Max Operating Altitude 10000 feet (3 km) Max Max Non-Operating Altitude 15000 feet (4.6 km) Max Acoustic Sound Power, LWAd = 3.9 Bel Sound Pressure, LpAm (Bystander) = 20.9 dB Primary Airflow Side-to-side Aruba 6000 24G 4SFP Switch (R8N88A) Electrical Characteristics Frequency 50 / 60 Hz AC Voltage 100-127 VAC / 200-240 VAC Current 0.6 A / 0.4 A Power Consumption (230 VAC) Idle: 15.4W Max Power (w/o PoE): 33W Safety UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1 UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368- 1:2014 Emissions VCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 / CISPR-32, Class A Lasers EN 60825-1:2007 / IEC 60825- 1:2007 Class 1 Class 1 Laser Products / Laser Klasse 1 (Applicable for accessories - Optical Transceivers only) Immunity Generic CISPR 24 / CISPR 35 EN EN 55024:2010 / EN 55035:2017 ESD IEC 61000-4-2 Radiated IEC 61000-4-3 EFT/Burst IEC 61000-4-4 Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions IEC 61000-4-11 Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Mounting and Enclosure Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting

Objev podobné jako HPE Aruba Networking CX 6000 24G 4SFP Switch R8N88A RENEW

HPE Aruba Networking CX 6100 24G 4SFP+ Switch JL678A RENEW Aruba 6100 24G 4SFP+ Switch (JL678A) Electrical Characteristics Frequency 50 / 60 Hz AC Voltage 100-127 VAC / 200-240 VAC Current 0.6 A / 0.4 A Power Consumption (230 VAC) Idle: 15.4W Max Power (w/o PoE): 33W Safety UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1 UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368- 1:2014 Emissions VCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 / CISPR-32, Class A Lasers EN 60825-1:2007 / IEC 60825- 1:2007 Class 1 Class 1 Laser Products / Laser Klasse 1 (Applicable for accessories - Optical Transceivers only) Immunity Generic CISPR 24 / CISPR 35 EN EN 55024:2010 / EN 55035:2017 ESD IEC 61000-4-2 Radiated IEC 61000-4-3 EFT/Burst IEC 61000-4-4 Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions IEC 61000-4-11 Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Mounting and Enclosure Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting Standards And Protocols (Applies to all products in series) RFC 1591 DNS (client) SSHv1/SSHv2 Secure Shell IEEE 802.1D MAC Bridges IEEE 802.1p Priority IEEE 802.1Q VLANs IEEE 802.1s Multiple Spanning Trees IEEE 802.1w Rapid Reconfiguration of Spanning Tree IEEE 802.3 Type 10BASE-T IEEE 802.3ab 1000BASE-T IEEE 802.3ad Link Aggregation Control Protocol (LACP) IEEE 802.3at Power over Ethernet IEEE 802.3az Energy Efficient Ethernet IEEE 802.3x Flow Control RFC 768 UDP RFC 783 TFTP Protocol (revision 2) RFC 792 ICMP RFC 793 TCP RFC 826 ARP RFC 1350 TFTP Protocol (revision 2) RFC 2131 DHCP client RFC 4330 Simple Network Time Protocol (SNTP) v4 RFC 951 BOOTP (VLAN 1 Only) RFC 1542 BOOTP Extensions (VLAN 1 only) IGMPv2/IGMPv3 IGMP/MLD Snooping RFC 1981 IPv6 Path MTU Discovery RFC 2460 IPv6 Specification RFC 2925 Remote Operations MIB (Ping only) RFC 3315 DHCPv6 (client only) RFC 3513 IPv6 Addressing Architecture RFC 3596 DNS Extension for IPv6 RFC 3176 sFlow RFC 4022 MIB for TCP RFC 4113 MIB for UDP (Partially) RFC 4251 SSHv6 Architecture RFC 4252 SSHv6 Authentication RFC 4253 SSHv6 Transport Layer RFC 4254 SSHv6 Connection RFC 4293 MIB for IP RFC 4419 Key Exchange for SSH RFC 4443 ICMPv6 RFC 4861 IPv6 Neighbor Discovery RFC 4862 IPv6 Stateless Address Auto-configuration RFC 1213 MIB RFC 1493 Bridge MIB RFC 2674 802.1p and IEEE 802.1Q Bridge MIB (Partial support. MIB objects supported: ieee8021BridgeBasePort, ieee8021BridgeBasePort, ieee8021BridgePortMrpJoinTime, ieee8021BridgePortMrpLeaveTime, ieee8021BridgePortMrpLeaveAllTime) RFC 2737 Entity MIB RFC 2863 The Interfaces Group MIB IEEE 802.1AB Link Layer Discovery Protocol (LLDP) RFC 1098 A Simple Network Management Protocol (SNMP) ANSI/TIA-1057 LLDP Media Endpoint Discovery (LLDP-MED) SNMPv1/v2c/v3 RFC 2819 Four groups of RMON: 1 (statistics), 2 (history), 3 (alarm) and 9 (events) RFC 1098 A Simple Network Management Protocol (SNMP) RFC 2474 DiffServ precedence, with 2/4/8 queues per port RFC 2475 DiffServ Architecture RFC 2597 DiffServ Assured Forwarding (AF) RFC 2598 DiffServ Expedited Forwarding (EF) IEEE 802.1X Port Based Network Access Control RFC 1492 TACACS+ RFC 2138 RADIUS Authentication RFC 2866 RADIUS Accounting Secure Sockets Layer (SSL)

Objev podobné jako HPE Aruba Networking CX 6100 24G 4SFP+ Switch JL678A RENEW

Switch 48 portový, 1 Gbit, 4× SFP, QoS, VLAN, spravovatelný, rack Switch je aktivní síťový komponent propojující jednotlivá zařízení případně jiné prvky sítě. Slouží ke správě síťového provozu. Aruba IOn 1930 48G 4SFP+ Switch je určen k instalaci do rozvaděče. Nabízený model vás zaujme přepínací kapacitou 176 Gb/s a paketovou kapacitou 130,95 ks. Switch disponuje 48 ks RJ-45 portů, které jsou určeny k propojení se síťovými prvky. Celkem 4 konektory typu SFP využijete k přenosu dat přes optická vlákna. Technologie 10/100/1000Base-T dokáže šířit data až při rychlosti 1000 Mbit/s. Využívá Dual Personality porty, které vynikají tím, že je jejich součástí konektor RJ-45 i SFP, v konkrétním okamžiku lze však použít jen jeden z nich. Rozměry switche odpovídají hodnotám 442,5 × 282,4 × 43,9 mm. Díky technologii QoS neboli Quality of Service nedojde k zahlcení switche, dokonce si můžete seřídit přednost koncových zařízení. Tento switch navíc nabízí schopnost...

Objev podobné jako Aruba IOn 1930 48G 4SFP+ Switch (JL685A)

Aruba 6200F 24G 4SFP+ Switch JL724A RENEW Klíčové vlastnosti Konektivita na vrstvě 2 s podporou pro ACL, robustní QoS a statické směrování. Integrované uplinky 1/10GbE a až 370 W PoE třídy 4 pro podporu zařízení IoT. Inteligentní monitorování, přehled a řešení problémů s nástrojem Aruba Network Analytics Engine. Jednoduché nasazení jedním dotykem pomocí Aruba CX mobilní aplikací. Zabezpečený a jednoduchý přístup pro uživatele a IoT s technologií Aruba Dynamic Segmentation. Bezpečnost Podpora seznamu řízení přístupu (ACL) pro IPv4 i IPv6; umožňuje filtrovat provoz a zabránit tak neoprávněným uživatelům přístup k síti nebo k řízení sítě. Filtrování zdrojových portů umožňuje pouze zadaným portům komunikovat mezi sebou. Zabezpečený FTP umožňuje bezpečný přenos souborů do switche a z něj a chrání před nežádoucím stahováním souborů nebo jejich přenosem. Secure shell šifruje všechna přenášená data, aby byla bezpečná pro vzdálený přístup k CLI přes IP sítě. Zablokování adresy MAC zabraňuje tomu, aby se konkrétní adresa MAC nemohla připojit k síti.

Objev podobné jako Aruba 6200F 24G 4SFP+ Switch JL724A RENEW

Herní doplněk / DLC - Nintendo Switch, elektronická licence, klíč pro Nintendo eShop, žánr: Akční, pro uplatnění je vyžadována základní hra Super Smash Bros. Ultimate: Min Min Challenger Pack Nintendo Switch vyžaduje ke hraní vlastnictví základní hry. Min Min je 6. hrdina, který přichází do hry Super Smash Bros. Ultimate Nintendo Switch. Min Min Min Min patří mezi ikonické bojovníky a přichází jako první hrdiny v druhém balíčku Ultimate Fighters Pass. Úžasné trikyS Min Min se snadno pustíte do boje...

Objev podobné jako Super Smash Bros. Ultimate: Min Min Challenger Pack - Nintendo Switch Digital (1134625)

Aruba Instant On 1930 24G 4SFP/SFP+ Switch Aruba Instant On 1930 24G 4SFP/SFP+ Switch je vysokovýkonný, chytrě spravovaný switch navržený s ohledem na malé podniky. Snadno se implementuje a je cenově dostupný. Je navržen tak, aby zvládal dnešní náročné aplikace, jako je hlasová a video konference, a zajišťoval tak konzistentní připojení pro zlepšení výkonu. Specifikace Porty: 24 RJ-45 autosensing 10/100/1000 ports, 4 SFP+ 1/10GbE ports Rozměry: 17.42(w) x 8.72(d) x 1.73(h) in (44.25 x 22.15 x 4.39 cm) Hmotnost: 5.32 lb (2.41 kg) Procesor a paměť: ARM Cortex-A9 @ 800 MHz, 512 MB SDRAM, 256 MB flash Výkon: Průchodnost 95.23 Mpps, kapacita 128 Gbps Prostředí: Provozní teplota 32°F to 104°F (0°C to 40°C), vlhkost 15% to 95% @ 104°F (40°C) Elektrické vlastnosti: Frekvence 50-60 Hz, napětí 100-240V, proud 0.5/0.3 A, maximální výkon 22.6 W Vlastnosti Snadná instalace a správa: Aplikace Aruba Instant On umožňuje nastavit, spravovat a monitorovat switche a přístupové body přímo z vašeho telefonu. Bezpečnost: Vstavané bezpečnostní funkce chrání vaši síť před neoprávněným přístupem. Vysoký výkon: Série se skládá ze čtyř (4) třídních 4 PoE (PoE+) switchů a tří (3) non-POE switchů včetně 8- 24- a 48-portových Gigabit Ethernet switchů. Optimalizovaný uživatelský zážitek: Aplikace Aruba Instant On poskytuje běžné postupy pro switche a přístupové body Instant On, což usnadňuje konfiguraci, monitorování a správu vaší sítě na dálku. Žádné skryté poplatky: Všechny funkce jsou zahrnuty v ceně hardwaru - nejsou zde žádné opakující se poplatky za předplatné nebo licence. Bezpečnostní funkce TPM-based security: Zahrnuje Trusted Platform Module (TPM) pro bezpečné generování a ukládání kryptografických klíčů. Automatická ochrana proti DoS: Monitoruje a chrání síť před škodlivými útoky. ARP Attack prevention: Dynamická ARP ochrana blokuje ARP vysílání od neautorizovaných hostitelů. Port security: Porty v izolační skupině portů jsou omezeny na přeposílání vrstvy 2 mezi porty v této skupině. Výkon a efektivita Energy Efficient Ethernet (EEE): Splňuje požadavky standardu IEEE 802.3az pro úsporu energie během období nízké datové aktivity. Auto-port shut down: Switch šetří energii automatickým vypnutím napájení na neaktivních portech. Energy-efficient cooling: Zahrnuje proměnné rychlosti ventilátorů, které pracují pouze na rychlosti nutné k udržení provozní teploty. Switching Features IEEE 802.3x Flow control: Poskytuje mechanismus pro regulaci toku šířený sítí, aby se zabránilo ztrátě paketů na přeplněném uzlu. Spanning Tree Protocol (STP): Podporuje standardní IEEE 802.1D STP, IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) pro rychlejší konvergenci. Jumbo frame support: Podporuje až 9216 bajtů velikosti rámců pro zlepšení výkonu při přenosu velkých dat. Záruka, servis a podpora Aruba Instant On Limited Lifetime Support poskytuje 24X7 telefonickou podporu po dobu prvních 90 dnů a podporu chatu po dobu záruky. Komunitní podpora je zahrnuta po dobu života produktu.

Objev podobné jako 20 x Aruba Instant On 1930 24G 4SFP/SFP+ Switch

Síťový adaptér Napájecí zdroj 9V (center negative) pro efekty Strymon a další běžné pedály. Zdroj si poradí s napětím po celém světě a disponuje velmi tichým provozem.

Objev podobné jako Strymon Power Supply

HPE Aruba Networking CX 6100 48G Class4 PoE 4SFP+ 370W Switch RENEW JL675A Klíčové vlastnosti Konektivita na vrstvě 2 s podporou pro ACL, robustní QoS a statické směrování. Integrované uplinky 1/10GbE a až 370 W PoE třídy 4 pro podporu zařízení IoT. Kompaktní 12portový model bez ventilátoru pro tichý chod. Flexibilita správy s podporou Aruba Central, snadno použitelné webové grafické rozhraní, rozhraní CLI a Aruba NetEdit. Jednoduché nasazení s funkcí Zero Touch Provisioning. Připravenost na softwarovou definici s rozhraními REST API. Zjednodušení přidávání, přesunů a změn pomocí bezbarvého systému portů. Bezpečnost Podpora seznamu řízení přístupu (ACL) pro IPv4 i IPv6; umožňuje filtrovat provoz a zabránit tak neoprávněným uživatelům přístup k síti nebo k řízení sítě. Filtrování zdrojových portů umožňuje pouze zadaným portům komunikovat mezi sebou. Zabezpečený FTP umožňuje bezpečný přenos souborů do switche a z něj a chrání před nežádoucím stahováním souborů nebo jejich přenosem. Secure shell šifruje všechna přenášená data, aby byla bezpečná pro vzdálený přístup k CLI přes IP sítě. Zablokování adresy MAC zabraňuje tomu, aby se konkrétní adresa MAC nemohla připojit k síti. Specifications Aruba 6100 48G Class4 PoE 4SFP+ 370W Switch (JL675A) Description 48x ports 10/100/1000BASE-T Ports 4x 1G/10G SFP ports Supports PoE Standards IEEE 802.3af, 802.3at 1x USB-C Console Port 1x USB Type-A Host port Power supplies Fixed power supply (500W) Up to 370W of Class 4 PoE Power Fans Fixed fans Physical characteristics Dimensions (H) 4.39 cm (W) 44.2 cm (D) 30.48 cm (1.73" x 17.4" x 12.0") Configuration Weight 5.02 kg (11.07 lbs) Additional Specifications CPU Dual Core ARM Cortex A9 @ 1016 Mhz Memory and Flash 4 GB DDR3 16 GB eMMC Packet Buffer 12.38MB (4.5MB Ingress/7.875MB Egress) Performance Model Switching Capacity 176 Gbps Model Throughput Capacity 98.6 Mpps Average Latency (LIFO-64- bytes packets) 1 Gbps: 1.9 µSec , 10 Gbps: 1.8 µSec Switched Virtual Interfaces (dual stack) 16 IPv4 Host Table (ARP) 1,024 IPv6 Host Table (ND) 512 IPv4 Unicast Routes 512 IPv6 Unicast Routes 512 MAC Table Capacity 8,192 IGMP Groups 512 MLD Groups 512 IPv4/IPv6/MAC ACL Entries (ingress) 256 / 128 / 256 Aruba 6100 48G Class4 PoE 4SFP+ 370W Switch (JL675A)) Environment Operating Temperature 32°F to 113°F (0°C to 45°C) up to 5000 ft (1.5 km) derate -1°C for every 1000 ft (305 m) from 5000 ft (1.5 km) to 10000 ft (3.0 km) Operating Relative Humidity 15% to 95% at 104°F (40°C) non-condensing Non-Operating -40°F to 158°F (-40°C to 70°C) up to 15000 ft (4.6 km) Non-Operating Storage Relative Humidity 15% to 90% @ 149°F (65°C) non-condensing Max Operating Altitude 10000 feet (3 km) Max Max Non-Operating Altitude 15000 feet (4.6 km) Max Acoustic Sound Power, LWAd = 4.3 Bel Sound Pressure, LpAm (Bystander) = 29.8 dB Primary Airflow Side-to-side Electrical Characteristics Frequency 50 / 60 Hz AC Voltage 100-127 VAC / 200-240 VAC Current 4.9 A / 2.4 A Power Consumption (230 VAC) Idle: 30.6W Max Power (w/o PoE): 45W Max Power (w/ PoE): 480W Safety UL 60950-1; IEC 60950-1; EN 60950-1; CAN/ CSA-C22.2 No. 60950-1; EN 60825-1 UL 62368-1 Ed. 2; IEC 62368-1 Ed. 2; EN 62368-1:2014 Emissions VCCI-CISPR 32, Class A; CNS 13438; ICES-003 Issue 6 Class A; FCC CFR 47 Part 15, Class A; EN 55032: 2015 +AC:2016 / CISPR-32, Class A Aruba 6100 48G Class4 PoE 4SFP+ 370W Switch (JL675A)) Lasers EN 60825-1:2007 / IEC 60825- 1:2007 Class 1 Class 1 Laser Products / Laser Klasse 1 (Applicable for accessories - Optical Transceivers only) Immunity Generic CISPR 24 / CISPR 35 EN EN 55024:2010 / EN 55035:2017 ESD IEC 61000-4-2 Radiated IEC 61000-4-3 EFT/Burst IEC 61000-4-4 Surge IEC 61000-4-5 Conducted IEC 61000-4-6 Power frequency magnetic field IEC 61000-4-8 Voltage dips and interruptions IEC 61000-4-11 Harmonics EN 61000-3-2, IEC 61000-3-2 Flicker EN 61000-3-3, IEC 61000-3-3 Mounting and Enclosure Mounts in an EIA-standard 19-inch telco rack or equipment cabinet (rack-mounting kit available); horizontal surface mounting; wall mounting

Objev podobné jako HPE Aruba Networking CX 6100 48G Class4 PoE 4SFP+ 370W Switch RENEW JL675A

Power supply, 5 V / 7.5 W, order separately: power cord (C7)

Objev podobné jako Datalogic 90ACC0430 power supply

Power supply, order separately: power cord, fits for: L10

Objev podobné jako Zebra 450154 power supply

Power supply, 90 W, order separately: power cord.

Objev podobné jako Datalogic 94ACC0250 power supply

Power supply, 3 A, 18 W, incl.: plugs, order separately: connection cable (USB), fits for: 1 slot charging station.

Objev podobné jako Datalogic 94ACC0249 power supply

Power supply for Epson TM-P60II and TM-P80 , order separately: power cord (C13).

Objev podobné jako Epson C32C825375, power supply

Power Supply, order separately: power cord, fits for: TM-T88VII

Objev podobné jako Epson 2212332, Power Supply

Power supply for Epson TM-P60II and TM-P80 , order separately: power cord (C13).

Objev podobné jako Epson C32C825375 power supply

Power supply, fits for: TSP143II ECO

Objev podobné jako Star 30781822, power supply

Power Supply, order separately: Power Cord, fits for: Memor 30/35 Charging Docks

Objev podobné jako Datalogic 94ACC0380 Power Supply

Power supply for SP700

Objev podobné jako Star 30781650, power supply

Power supply, incl.: power cord (EU), fits for: SM-S230i

Objev podobné jako Star 39569450, power supply

Power supply, incl.: power cord (EU), fits for: Star mobile printers

Objev podobné jako Star 39569320, power supply

Power supply, incl.: power cord (EU), fits for: DP8340.

Objev podobné jako Star 30782120, power supply

Power Supply, AC, order separatly: power cord, for: PMU3300

Objev podobné jako Citizen 2000465, Power Supply

Power supply, 12V/18W, right angle plug, order separately: power-cord, fits for: Magellan 3510Hsi, 3550Hsi.

Objev podobné jako Datalogic 90ACC0358 power supply

Power supply, AC / DC, order separately: power cord (C13), fits for: VM1, VM1A, VM2, VM3, VM3A.

Objev podobné jako Honeywell VM1302PWRSPLY power supply

Power supply, fits for: NQuire750/1000II/1500

Objev podobné jako Newland ADP0042 power supply

Power supply, fits for: Nquire200/300/351 series

Objev podobné jako Newland ADP005 power supply

Power supply, 5V, 1.5 A, incl. Plugs: EU, UK, US

Objev podobné jako Newland ADP100 power supply

Power supply, EU, fits for: CMP-20, CMP-20II, CMP-30, CMP-30II, CMP-25L

Objev podobné jako Citizen 2000444, power supply

AC Adaptor, fits for: CT-S280

Objev podobné jako Citizen 28AD, power supply

Power supply, 18 VDC, 3.3 A, order separately: power cord, fits for: VH10, VC80, VC80x, VC8300

Objev podobné jako Zebra PS1450, power supply

Síťový adaptér Napájecí adaptér pro zařízení Neural DSP Quad Cortex a Nano Cortex.

Objev podobné jako Neural DSP Power Supply

Napájecí adaptér Donner DP-1 má izolovaný stejnosměrný výstup pro efektové pedály 9V/12V/18V. Spínač pro LED světlaOtočte přepínač směrem k LED světlům, aby se všechna světla rozsvítila po připojení napájení. Pokud nechcete zapnutá LED světla, otočte přepínač zpět. Nezávislé a stabilní napájeníZdroje efektů série Donner mají absolutně nezávislá napájecí rozhraní. Tento model má 18V napájení a všechny výstupy jsou navzájem nezávislé prostřednictvím obvodu regulátoru napětí. Materiál z hliníkové slitiny je pevný a kompaktní a snadno se přenáší. Ochrana proti zkratuVšech 10 výstupů v této jednotce má samostatnou ochranu proti zkratu, tzn. zkrat v jednom kanálu neovlivní funkci ostatních kanálů. Za okolností, kdy jsou všechna LED světla zapnuta, LED světlo zkratovaného kanálu zhasne, zatímco světla v ostatních normálních kanálech jsou stále zapnuta. To pomáhá lokalizovat chyby. Balení obsahuje: Napájecí kabel;Adaptér;Redukce Konektor: Barrel Napájení: 100V - 240V Napětí: 9V;12V;18V Typ: Zdroj napájení

Objev podobné jako Donner EC812 DP-1 10 Isolated Output Guitar Effect Pedals Power Supply Napájecí adaptér

Switch 48 portový, 1 Gbit, 2× SFP, QoS, VLAN, rack Switch je aktivní síťová jednotka propojující jednotlivá zařízení případně další prvky sítě. Slouží k vedení síťového provozu. Tenda TEG1050F Gigabit Switch with SFP byl navržen k umístění do racku. Tento typ dokáže zaujmout svou přepínací kapacitou 100 Gb/s a paketovou kapacitou 14,9 ks. Switch je vybaven 48 ks RJ-45 portů, které jsou poskytnuty k propojení se síťovými prvky. Celkem 2 konektory typu SFP užijete k přenosu dat skrz optická vlákna. Přepínač pracuje s technologiemi dovolující převádět data až do rychlosti 1000 Mbit/s. Využívá Dual Personality porty, které se mohou pochlubit tím, že je jejich součástí konektor RJ-45 i SFP, v jedné chvíli je možné využít jen jeden z nich. Rozměry switche byly stanoveny na 240 × 440 × 44 mm. Díky technologii QoS neboli Quality of Service není možné vytížení switche, navíc lze seřídit prioritu koncových zařízení. Integrované LAN porty podporují přenosovou rychlost...

Objev podobné jako Tenda TEG1050F Gigabit Switch with SFP (TEG1050F)

S310-48T4X (48*10/100/1000BASE-T ports, 4*10GE SFP+ ports, built-in AC power) Tento switch je vybaven 48 gigabitovými ethernetovými porty, které spolu se 4 ethernetovými SFP porty poskytují vysokorychlostní konektivitu a rychlý přenos dat. Inteligentní řízení rychlosti ventilátorů upravuje rychlost ventilátoru podle zatížení switche, čímž snižuje hlučnost a šetří energii. Switche řady S310 podporují jak režim správy v cloudu, tak režim správy v místě instalace. Tyto dva režimy správy lze flexibilně přepínat podle potřeby. - manažovatelný L2 switch - statický routing - IPV6 - funkce hibernace portů - inteligentní řízení rychlosti ventilátorů - vestavěný zdroj - režim správy z cloudu i v místě instalace - PoE Switching capacity 176 Gbps Packet forwarding 131 Mpps Fixed port 48 x 10/100/1000BASE-T ports (PoE+), 4 x 10GE SFP+ ports Chassis dimensions (H x W x D) 43.6 mm x 442 mm x 220 mm Chassis height 1 U Weight in full configuration (including packaging materials) 4,29 kg Power module type Built-in AC power module Rated voltage 100 V to 240 V AC, 50/60 Hz Maximum power consumption Without PoE: 64.7 W ƒWith PoE: 462.8 W (PoE: 380 W) Input voltage range [V] ƒ AC input: 90 V AC to 290 V AC, 45 Hz to 65 Hz Noise Sound power at normal temperature: 49.3 dB (A) ƒSound power at high temperature: 63 dB (A) ƒSound pressure at normal temperature: 37.3 dB (A) First supported version V600R023C00 Integrated fixed device Y Dimensions without packaging (H x W x D) [mm(in.)] Basic dimensions (excluding the parts protruding from the body): 43.6 mm x 442.0 mm x 220.0 mm (1.72 in. x 17.4 in. x 8.66 in.) Maximum dimensions (the depth is the distance from ports on the front panel to the parts protruding from the rear panel): 43.6 mm x 442.0 mm x 227.0 mm (1.72 in. x 17.4 in. x 8.94 in.) Dimensions with packaging (H x W x D) [mm(in.)] 90.0 mm x 550.0 mm x 360.0 mm (3.54 in. x 21.65 in. x 14.17 in.) Chassis height [U] 1 Installation type Rack mounting,Desk mounting,Wall mounting Chassis material Metal Weight without packaging [kg(lb)] 3.24 (7.14) Weight with packaging [kg(lb)] 4.29 (9.46) Typical power consumption [W] 49.44 Typical heat dissipation [BTU/hour] 168.69 Maximum power consumption [W] - Without PoE: 64.7 W - Full PoE load: 462.80 W (PoE: 380 W) Maximum heat dissipation [BTU/hour] - Without PoE: 220.76 - Full PoE load: 1579.12 Static power consumption [W] 34.04 100% power consumption [W] 49.44 MTBF [year] 48.14 MTTR [hour] 2 Availability > 0.99999 Noise at normal temperature (acoustic power) [dB(A)] 49.3 Noise at high temperature (acoustic power) [dB(A)] 63 Noise at normal temperature (acoustic pressure) [dB(A)] 37.3 Number of card slots 0 Number of power slots 0 Number of fans modules 2 Maximum number of physical ports on the entire device 52 Maximum number of 100GE ports 0 Maximum number of 40GE ports 0 Maximum number of 25GE ports 0 Maximum number of 10GE ports 4 Maximum number of 5GE ports 0 Maximum number of 2.5GE ports 0 Maximum number of GE ports 52 Maximum number of FE ports 48 Uplink ports 4 x 10GE SFP+ ports Downlink ports 48 x 10/100/1000BASE-T ports (380 W, PoE+) Dedicated stack port Not supported Redundant power supply Not supported Long-term operating temperature [°C(°F)] -5°C to +50°C (23°F to 122°F) at an altitude of 0-1800 m (0-5905.44 ft.) Restriction on the operating temperature variation rate [°C(°F)] When the altitude is 1800–5000 m (5906–16404 ft.), the highest operating temperature reduces by 1°C (1.8°F) every time the altitude increases by 220 m (722 ft.). Devices cannot start when the temperature is lower than 0°C (32°F). The operating temperature ranges from –5°C (23°F) to +45°C (113°F) when optical modules with transmission distances greater than or equal to 60 km are used. Storage temperature [°C(°F)] –40°C to +70°C (–40°F to +158°F) Long-term operating relative humidity [RH] 5% RH to 95% RH (non-condensing) Long-term operating altitude [m(ft.)] 0–5000 m (0–16404 ft.) Storage altitude [m(ft.)] 0-5000 m (0-16404 ft.) Power supply mode AC built-in Rated input voltage [V] - AC input: 100 V AC to 240 V AC, 50/60 Hz - High-voltage DC input: 240 V DC Input voltage range [V] - AC input: 90 V AC to 290 V AC; 45 Hz to 65 Hz - High-voltage DC input: 190 V DC to 290 V DC Maximum input current [A] 6 A CPU 1.1 GHz, 2 cores Memory 2 GB Flash memory Physical space: 1 GB Console port RJ45 Eth Management port Not supported USB Not supported Hardware real-time power detection Not supported Dying gasp Supported RTC Not supported RPS input Not supported Complete device sleeping Not supported Service port surge protection [kV] Common mode: ±7 kV Power supply surge protection [kV] Differential mode: ±6 kV; common mode: ±6 kV Ingress protection level (dustproof/waterproof) IP20 Types of fans Built-in Heat dissipation mode Air cooling for heat dissipation, intelligent fan speed adjustment Airflow direction Air intake from left and air exhaust from right PoE Supported Maximum PoE power consumption [W] 380 PoE+ power interfaces 48 Full load PoE power consumption 15.4W (802.3af) 24 Full load PoE power consumption 30W (802.3at) 12 Certification EMC certification Safety certification Manufacturing certification

Objev podobné jako Huawei S310-48P4X Switch (48*10/100/1000BASE-T ports(380W PoE+), 4*10GE SFP+ ports, built-in AC power)

Power Supply, Input: 100-240V, Output: 24V, 3.25A, 78W, order separately: power cord, fits for: KC50

Objev podobné jako Zebra PWR-BGA24V78W4WW Power Supply

Power Supply, Dual Split, Memor10.

Objev podobné jako Datalogic 94ACC0263 Power Supply Memor10

Vehicle power supply, 12 V / 24 V, CLA, fits for: Memor 10 vehicle dock.

Objev podobné jako Datalogic 94A050048 vehicle power supply

Power supply, USB, order separately: connection cable USB, fits for: Memor K.

Objev podobné jako Datalogic 94ACC0316 power supply, USB

Power supply cover, colour: white, fits for: TM-T88VII.

Objev podobné jako Epson C32C814618, power supply cover