datalogic hld g041 bk holder

Desk-/ wall holder, colour: black, fits for: GD4520, GD4590.

Objev podobné jako Datalogic HLD-G041-BK holder

Desk-/wall holder, colour: bílá, fits for: GD4520, GD4590.

Objev podobné jako Datalogic HLD-G041-WH holder

Desk-/ wall holder, colour: black, fits for: GD2500.

Objev podobné jako Datalogic HLD-Q040-BK holder

česká poštovní schránka BK.931.G.AM
poštovní schránka BK.210.HM s montážním materiálem
židle Autronic AZC-S2113 BK
uzavřená sluchátka Sencor SEP 701BT BK
poštovní schránka Richter BK.38.N s montážním materiálem
nerezová schránka BK.501.GW.N s klíči
pohyblivý věšák Autronic GD-176 BK
schránka Richter BK.03.HM s montážním materiálem
němý sluha 82646 BK černý kov
černá kovová poštovní schránka BK.501.GW.AM
poštovní schránka BK.506.G.AM s tubusem na tiskoviny
hnědá ocelová schránka BK.57.H Richter
poštovní schránka BK.509.G.AM s montážním materiálem
poštovní schránka Richter BK.57.N
bezdrátová sluchátka Sencor SEP 530BT BK
Autronic DR-N1006 BK stojan na kabáty

Table-/Wallmount for Datalogic Touch 65 Light/Pro.

Objev podobné jako Datalogic HLD-T010-65-BK Table-/Wallmount

Table-/Wallmount for Datalogic Touch 90 Light/Pro.

Objev podobné jako Datalogic HLD-T010-90-BK Table-/Wallmount

The HLD-P080 is a plastic holder for the PowerScan™ 8000 and PowerScan™ 9000 families of barcode readers, designed to be mounted on a wall or fixed to a desk..

Objev podobné jako Datalogic HLD-P080 držák HLD-P080

Collapsible Stand/Holder for Datalogic QuickScan Lite, colour: black.

Objev podobné jako Datalogic STD-QW20-BK stojánek/Holder

360° Forearm Holder, requires protective boot, fits for: Memor 12/17

Objev podobné jako Datalogic 94ACC0393 360° Forearm Holder

Gooseneck stand, black, for Datalogic QuickScan 2400.

Objev podobné jako Datalogic STD-QD24-BK stojánek

Sencor SEP 701BT BK jsou uzavřená bezdrátová sluchátka přes hlavu s Bluetooth 5.3 a dosahem až 12 metrů. Nabízejí výdrž baterie až 30 hodin přehrávání a dobu nabíjení přibližně 2 hodiny. Podporují audio profily A2DP, HFP, HSP a AVRCP pro širokou kompatibilitu s zařízeními.

• Bluetooth 5.3 pro stabilní přenos na vzdálenost až 12 metrů
• Výdrž baterie až 30 hodin přehrávání na jedno nabití
• Rychlé nabíjení za přibližně 2 hodiny
• Ergonomický tvar pro pohodlné nošení i při dlouhém používání

Objev podobné jako Sencor SEP 701BT BK uzavřená sluchátka, černá

Bluetooth scanner, retail, 1D, linear imager, 400 scans/sec., Bluetooth (SPP), multi-interface (RS-232, KBW, USB), IP42, incl.: cable (USB, Micro ), colour: black Datalogic QuickScan I QBT2101 I dnes se najde mnoho odvětví, kde se i nadále pracuje s 1D čárovými kódy. QBT2131 rychle zachycuje všechny běžné čárové kódy a je zvláště spolehlivá, jelikož neobsahuje pohyblivé součásti. S Bluetooth se uživatel může volně pohybovat až do 25m od základní stanice. V případě ztráty z dosahu je čtečka schopna pojmout 500 kódů. PARAMETRY Barva: černá Rozhraní: Bluetooth, RS-232 / KWB / USB (Tento set obsahuje USB propojovací kabel) Bezdrátová technologie Bluetooth s použitím kolébky - 98992576 DATALOGIC kolébka pro DATALOGIC QuickScan QBT2400 / černá - NENÍ SOUČÁSTÍ BALENÍ (pouze čtečka + kabel) Profil Bluetooth HID(Zařízení pro lidské rozhraní) SPP (profil sériového portu) Protokol Bluetooth 3.0 Certifikovaná třída 2 Rádiová frekvence: 2,4 GHz Rádiový dosah (přímý): 25,0 m Odpovídající standardum RoHS, IP42 Barcode Snímání čárových kódů: •1D: Autodiscriminates all standard 1D codes including GS1 DataBar™ linear codes •EAN/JAN Composites; GS1 DataBar Composites; GS1 DataBar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar Stacked Omnidirectional; UPC A/E Composites •Minimální šírka čárového kódu: 4 mil •Maximální přípustná vzdálenost: 70 cm •Rychlost snímání: 400 snímků / s ... Unknown localization key: "more"

Objev podobné jako Datalogic QBT2101-BK-BTK+ bezdrátová čtečka QuickScan QBT2101, 1D snímač + USB kabel (napájecí)

Trolley holder, pack of 60, fits for: Joya Touch.

Objev podobné jako Datalogic 91ACC0047 trolley holder, pack of 60

Wearable holder, fits for: Memor 10.

Objev podobné jako Datalogic 94ACC0194 wearable holder

Scanner holder (right side), adjustable angle, fits for: Rhino II.

Objev podobné jako Datalogic 94ACC0156 scanner holder

Holder, fits for: Taskbook (7'', 10'').

Objev podobné jako Datalogic 94ACC0234 holder

Wearable 360° Forearm Holder, requires rubber boot, fits for: Memor 30/35

Objev podobné jako Datalogic 94ACC0378 Wearable 360° Forearm Holder

Trolley holder, pack of 60, order separately: trolley bracket, fits for: Joya Smart/+

Objev podobné jako Datalogic trolley holder, pack of 60

Datalogic charging-/communication station, bluetooth, Multi-Interface (USB/RS-232/Wedge), color: black, fits for: GBT4500.

Objev podobné jako Datalogic WLC4090-BK-BT charging-/communication station, bluetooth

Datalogic charging-/communication station, 433 MHz, Multi-Interface (USB/RS-232/Wedge), color: black, fits for: GM4500.

Objev podobné jako Datalogic WLC4090-BK-433 charging-/communication station, 433 MHz

Datalogic Gryphon I Smart-Stand, colour: black.

Objev podobné jako Datalogic STD-AUTO-G040-BK Smart-stojánek, black

DECODING CAPABILITY 1D / LINEAR CODES Autodiscriminates all standard 1D codes including GS1 DataBar ™ linear codes. POSTAL CODES China Post STACKED CODES GS1 DataBar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar Stacked Omnidirectional ELECTRICAL CURRENT Operating (Maximum): Operating (Typical): INPUT VOLTAGE 5 VDC +/- 5% ENVIRONMENTAL AMBIENT LIGHT 0 - 100,000 lux DROP RESISTANCE Withstands repeated drops from 1.5 m / 5.0 ft onto a concrete surface. ESD PROTECTION (AIR DISCHARGE) 16 kV HUMIDITY (NON-CONDENSING) 5 - 90% PARTICULATE AND WATER SEALING IP40 TEMPERATURE Operating: 0 to 50 °C / 32 to 122 °F Storage/Transport: -20 to 70 °C / -4 to 158 °F INTERFACES INTERFACES / USB / PHYSICAL CHARACTERISTICS COLORS AVAILABLE Black; White Other colors and custom logo options are available for minimum quantity purchase. TOP CAP DESIGN Carbon-Fiber; Silver DIMENSIONS 15.2 x 15.3 x 6.8 cm / 6.0 x 6.0 x 2.7 in WEIGHT 150.0 g / 5.3 oz READING PERFORMANCE IMAGER SENSOR CCD Solid-State (2500 pixels) PRINT CONTRAST RATIO (MINIMUM) 15% READ RATE (MAXIMUM) 270 reads/sec. READING INDICATORS Beeper (Adjustable Tone and Volume); Datalogic ‘Green Spot’ Good Read Feedback; Side and Upper Illumination Good Read LED RESOLUTION (MAXIMUM) 0.100 mm / 4 mils .

Objev podobné jako Datalogic HD3130-BK Heron HD3130, čtečka kódů, stojánek, black (bez kabelu)

Bluetooth scanner, retail, 1D, linear imager, 400 scans/sec., Bluetooth (SPP), multi-interface (RS-232, KBW, USB), IP42, incl.: cable (USB), charging/transmitter cradle, colour: black Dokonce i v dnešní době je mnoho odvětví, kde se nadále pracuje s 1D čárovými kódy. Datalogic představuje další vývoj běžného laserového skeneru s lineárním imagerem. Tato čtečka čte všechny běžné 1D kódy a je zvláště spolehlivá, jelikož neobsahuje žádné pohyblivé části.Díky bezdrátové technologii bluetooth se bude uživatel moci volně pohybovat až do vzdálenosti 25m. V případě ztráty dosahu signálu je k dispozici vnitřní paměť, která pojme 500 skenů.PARAMETRY: •Čtečka pro 1D•Rychlost čtení: 400skenů/s•Provozní teplota: 0 až 50 °C •Teplota pro uskladnění: -40 až 70 °C•Rozhraní: RS-232, KBW, USB, Bluetooth•Příslušenství: nabíjecí kolébka, USB kabel•Podpora kódů:1D: Autodiscriminates all standard 1D codes including GS1 DataBar™ linear codes.Stacked: EAN/JAN Composites; GS1 DataBar Composites; GS1 DataBar Expanded Stacked; GS1 DataBar Stacked; GS1 DataBar Stacked Omnidirectional; UPC A/E Composites MÍRY: •Rozměry: 163 x 91 x 41 mm•Hmotnost: 190 g.

Objev podobné jako Datalogic QBT2131-BK-BTK1 bezdrátová čtečka QuickScan QBT2131, 1D snímač + základna, KIT USB

Smartstand, autosense, black, fits for Datalogic QD24xx.

Objev podobné jako Datalogic STD-AUTO-QD24-BK smartstojánek

Lineární snímač obrazu. Vynikající hodnota pro ty, kdo hledají cenově výhodné řešení. • Cenově výhodné kontaktní čtečky• Možnost dvou šířek pro čtení specifických kódů• Provoz se spouští a bez spoušti• Profi modely mají více rozhraní 1D / lineární kódyTřída krytí IP30Tovární záruka 5 letProdejní místa (POS) Malý objem transakcíPOŠTA - PřepážkyZDRAVOTNICTVÍ - Evidence pacientů Decoding Capability1D / Linear Codes Autodiscriminates all standard 1D codes including GS1DataBar™ linear codes.Stacked Codes GS1 DataBar Expanded Stacked; GS1 DataBar Stacked;GS1 DataBar Stacked OmnidirectionalElectricalCurrent Operating (Typical): < 100 mA @ 5 VDCStandby/Idle (Typical): 20 mA @ 5 VDCInput Voltage 5 VDC +/- 0.5 VEnvironmentalAmbient Light 0 - 20,000 luxDrop Resistance Withstands repeated drops from 1.5 m / 5.0 ft onto a concretesurfaceES D Protection (Air Discharge) 16 kVHumidity (Non-Condensing) 5 - 95%Particulate and Water Sealing IP30Temperature Operating: 0 to 50 °C / 32 to 122 °FStorage/Transport: -20 to 70 °C / -4 to 158 °FInterfacesInterfaces RS-232 / Keyboard Wedge: Touch 65/90 LiteRS-232 / USB / Keyboard Wedge / Wand Emulation Multi-Interface: Touch 65/90 ProUSB: Touch 65/90 LitePhysical CharacteristicsColors Available Black; Other colors and custom logo options are available forminimum quantity purchase.Dimensions 65 Pro & Lite: 16.0 x 8.4 x 5.8 cm / 6.3 x 3.3 ... Unknown localization key: "more"

Objev podobné jako Datalogic TD1120-BK-90K1 Touch 90 Light, čtečka kódů, stojánek, black, USB

Držák na mobilní telefon - na stůl, bez fixace, možnost nastavení polohy Sháníte držák pro telefon na sledování filmů? Vhodným řešením pro vás může být držák na mobilní telefon Orico. K praktickým funkcím patří možnost upravení polohy držáku. Držák na mobilní telefon na stůl oceníte při práci i zábavě. Hlavní přednosti držáku na telefon ORICO Phone / Tablet Holder Black Zásluhou držáku na mobilní telefon Orico bude jeho ovládání snazší K samozřejmostem patří také možnost úpravy polohy telefonu Držák na mobilní telefon Orico je vhodný na stůl

Objev podobné jako ORICO Phone / Tablet Holder Black (ORICO PH2-BK)

Nabíjecí stojánek - maximální celkový výkon 15 W a 3 W, vstup USB-C, přepěťová ochrana, základna pro hodinky V současné době nacházíme v rodinách vícero chytrých zařízení , které je třeba stále nabíjet. K tomuto účelu skvěle poslouží nabíjecí stojánek Choetech, který disponuje spolehlivou funkčností a moderním designem. Zajímá-li vás celkový výkon nabíjení u tohoto modelu, ten činí 15 W. Díky němu je možné nabíjet až tři zařízení naráz, přičemž jednotlivé výstupy vám nabídnou výkon 3 W K napájení samotného stojánku je využíván kabel s konektorem typu USB-C. Stojánek disponuje ochranou proti přepětí. Nemusíte se bát ani přehřátí nabíjeného zařízení, protože v tomto případě by se stojánek sám vypnul. Mezi jeho další přednosti počítáme podporu moderního způsobu nabíjení společnosti Apple, a to MagSafe. Lze využít též pro nabíjení hodinek. Nabíjecí stojánek ChoeTech 3 in 1 Holder Magnetic Wireless Charger for Iphone 12/13 series (include Apple watch charge...

Objev podobné jako ChoeTech 3 in 1 Holder Magnetic Wireless Charger for Iphone 12/13 series (include Apple watch charge (T585-F-BK)

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PHU Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PDHU Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-HON12PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-HON12PLU Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transferspeed: 12MbpsInput Cable Length: ca. 100 cmOutput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, RoHS & WEEEAdditional information: Devices shown are ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PDU Form-Fit Holder for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput Voltage: 5VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PHLU Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts Form-Fit (key-locking) holder is suitable for Honeywell CT40, CT45 & CT47.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device.The spring-loaded design holds the device tightly and securely in the cradle.This dock includes an integrated stylus holder that snaps your stylus into place while not in use and is designed to accommodate OEM accessories, such as the hand strap.The cradle allows the handheld's scanning function to continue to be used because of the cutout at the back.This holder comes with optional inserts to support devices with or without the protective rubber boot.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-HON12PDHLU:Spring-loaded design for easy insertion and removelStylus-Pen holderIncluding optional insertsCharging functionHeated Pogo-PinsLockable with keyCan be used with and without rugged bootCompatible with OEM hand strapInput Connector: 5.5mm DC-ConnectorInput ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-HON12PDHLU Form-Fit Holder (key-locking) for Honeywell CT40, CT45 & CT47

This RAM Mounts GDS (Key-Locking) holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCKL-V12-ZE2434CPDHU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Heated Pogo-Pins Lockable with key Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm ... Unknown localization key: "more"

Objev podobné jako RAM Mounts GDS Holder (Key-Locking) for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - Heated Pogo-Pins - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra EC50 & EC 55 with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra EC5x secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates standard and extended battery packs as well with the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE16CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the RAM-GDS-SKIN-ZE16-NG protective sleeve. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE16CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra EC50 & EC55 in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

This RAM Mounts GDS holder is suitable for Zebra TC2x & TC5x series with the IntelliSkin protective sleeve. The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable. To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle and is also charged. While keeping the Zebra Handheld secure, the powered dock also leaves the device’s top scanner and buttons exposed and usable. Available space in the back accommodates extended battery packs and the Zebra hand strap. The back of the device holder is prepared to support a diamond ball base (not included). Product features RAM Mounts RAM-GDS-DOCK-V12-ZE2434CPDU: Only compatible with the IntelliSkin protective sleeve Spring-loaded design for easy insertion and removal Integrated Stylus holder Charging function Input Connector: USB-C Output Connector: USB-A (Peripheral output - 500mAh) Input Cable Length: ca. 100 cm Additional information: To use the holder you need the IntelliSkin protective sleeve for the Zebra handheld. Devices shown are not included in the delivery. Only the RAM-GDS-DOCK-V12-ZE2434CPDU holder is supplied.

Objev podobné jako RAM Mounts GDS Holder for Zebra TC2x & TC5x Series in IntelliSkin Protective Sleeve - USB-C & USB-A Connector

3mk Steel Bike Holder™ - Držák na kolo pro vaše dobrodružství Bezpečně projíždějte město i krajinu s naším spolehlivým držákem na kolo. Odolnost, kterou oceníte Držák 3mk Steel Bike Holder™ je symbolem odolnosti. Je vyroben z kvalitního hliníku a nerezové oceli. Vašemu smartphonu na míru Držák je připraven na každý rozměr dobrodružství. Montáž zařízení o šířce 60-90 mm je možná. Stabilita je základ Užijte si jízdu bez vibrací s 3mk Steel Bike Holder™. Telefon zůstává stabilní i při těch nejnáročnějších expedicích. Perfektní pohled Úplné nastavení polohy držáku umožňuje upravit pozorovací úhel telefonu tak, abyste se mohli plně soustředit na cestu. Styl, který upoutá Design držáku 3mk Steel Bike Holder™ kombinuje funkčnost s elegancí. Každý držák zdobí logo 3mk a náš charakteristický vzor. Přidejte se k elitnímu klubu Vyberte si 3mk Steel Bike Holder™ a zažijte jízdu na zcela nové úrovni. Objednejte nyní a pociťte rozdíl.

Objev podobné jako 3mk držák na kolo - Steel Bike Holder

ERGOTRON THIN CLIENT CPU HOLDER, BLACK TEXTURED, držák pro tenkého klienta, kompatibilní s rameny a držáky This versatile holder offers an easy method for integrating a thin client or small computer into your workspace. The universal design adapts to the dimensions of the box, while its mounting interface attaches to a variety of surfaces: a VESA plate, directly to a desk, clamped to a pole or fastened to Ergotron Wall Track. The Thin Client Mount is not just for thin clients; it’s perfect for small CPUs, the Mac mini, or other peripherals. Extremely versatile: Includes hardware for attachment to several surfaces and Ergotron mounts‡ Size-adjustable holder fits a wide range of small computers Accommodates most all thin clients on the market Perfect holder for Mac mini from Apple® (compatible with all generations) Efficiently integrates a small computer into a display-mount configuration, creating a complete workstation solution Universal VESA interface attaches to any VESA mount that includes a 100 or 75 mm hole pattern Steel construction for strength and durability Saves space Part Number: 80-107-200 Description: Thin Client Mount (black) Includes holder, mounting hardware, mounting pads, strap ‡ Mounting Options: VESA mount; between monitor and VESA plate interfaces Pole with diameter ... Unknown localization key: "more"

Objev podobné jako ERGOTRON THIN CLIENT CPU HOLDER, BLACK TEXTURED, držák pro tenkého klienta, kompatibilní s rameny a držáky

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCKL-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE20PU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AInput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE20C-NG protective sleeve.Devices shown are not included in the delivery.Only the RAM-GDS-DOCK-ZE20PU holder is supplied.

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE20PU GDS EZ-Roll'r Holder for Zebra ET40/45 (8")

This RAM Mounts GDS EZ-Roll‘r holder is suitable for Zebra ET4x 10“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCK-ZE21PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the RAM-GDS-SKIN-ZE21C-NG protective sleeve.Devices ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCK-ZE21PDU GDS EZ-Roll'r Holder for Zebra ET40/45 (10")

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PDU:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the holder you need the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PDU GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PDU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorOutput Connector: USB-A 2.0 (Peripheral output - 500mAh)Input Voltage: 19VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 24 cmCertifications: ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PDU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PHLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PHLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PHLU Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts spring loaded (key-locking) holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PLU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionLockable with keyInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PLU Form-Fit Holder (key-locking) for Zebra MC9300/9400

This RAM Mounts Form-Fit (Latch) holder is suitable for the Getac ZX10 rugged tablet.The holder is powered by a 5.5mm DC connection and charges the device in the dock.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.Tablet accessories such as the optional battery or the multifunctional Getac hard handle can also be used.The RAM Temp-Right can be added for thermal regulation in extremely cold environments, while the RAM Vent-Temp utilizes the vehicle's vents to direct hot or cold air to the Getac ZX10.An NFC repeater add-on module can be used to extend the device's internal NFC reader.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-HOL-GE4PU:Compatible with the Getac tablet accessoiresNot compatible with the Getac hand strap accessoryEasy insertion and removalWith LatchAdditional mounting plate for attaching additional devices or accessoriesPrepared for RAM Vent-Temp, Temp Right or NFC repeaterInput Connector: 5.5mm DC-ConnectorInput Voltage: 19VInput Cable Length: ca. 100 cmCertifications: FCC, IC, CE, UKCA, WEEE & RoHSAdditional information: This holder will not support the Getac hand strap accessory.Devices shown are not included in ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-HOL-GE4PU Form-Fit Holder (Latch) for Getac ZX10

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 with Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PLU:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with KeysInput Connector: USB-A Input Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PLU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE24PLU Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock.This dock has built-in heating elements that provide the necessary heat required to prevent pogo pins from locking up, allowing them to operate in wet and freezing environments.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PHU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionHeated Pogo-PinsInput Connector: 5.5mm DCInput Voltage: 9VInput Cable Length: ca. 100 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PHU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PHU Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts Form-Fit (key-locking) holder is suitable for Zebra TC22 & TC27 without Rugged Boot.The holder is powered by a USB-A connector and charges the device in the dock.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a diamond ball base (not included).Product features RAM Mounts RAM-HOL-ZE24PL-1U:Compatible with the Zebra HandstrapSpring-loaded design for easy insertion and removalIntegrated stylus holder on the side of the dockOnly usable with Rugged BootLockable with keyInput Connector: USB-AInput Cable Length: ca. 125 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE24PL-1U holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE24PL-1U Form-Fit Holder (Key-Locking) for Zebra TC22/27

This RAM Mounts spring loaded holder is suitable for Zebra MC9300 & MC9400 with or without rugged boot.The holder is powered by a 5.5mm DC connection and charges the device in the dock while peripheral support is provided by the built-in USB Type-A cable.To insert the device, pull the upper part of the cradle upwards, insert the appropriate device. The spring-loaded design holds the device tightly and securely in the cradle.The back of the device holder is prepared to support a round ball base (not included).Product features RAM Mounts RAM-HOL-ZE32PDU:Spring-loaded design for easy insertion and removalIncluding shims for use without rugged bootClip holder for stylusAllows scanning while dockedCharging functionInput Connector: 5.5mm DCOutput Connector: USB-A 2.0 (Peripheral output - 500 mAh @ 5V)Input Voltage: 9VInput Cable Length: ca. 100 cmOutput Cable Length: ca. 25 cmCertifications: FCC, CE & RoHSAdditional information: Devices shown are not included in the delivery.Only the RAM-HOL-ZE32PDU holder is supplied.

Objev podobné jako RAM Mounts RAM-HOL-ZE32PDU Form-Fit Holder for Zebra MC9300/9400

This RAM Mounts GDS Form-Fit (Key-Locking) holder is suitable for Zebra ET4x 8“ series with IntelliSkin Next Generation protective sleeve.The holder is powered by a USB-C port and charges the device in the dock while peripheral support is provided by the built-in dual USB Type-A cable.To insert the device, place the bottom of the device in the cradle and press it into the cradle until it clicks into position.The cut-outs on the buttons and ports allow you to continue using them without any problems.The cradle also allows the tablet's scanning function to continue to be used because of the cutout at the back.Tablet accessories such as PowerPack batteries can also be stored inside.The back of the device holder is prepared to support a VESA 75x75 mm or round ball base (not included).Product features RAM Mounts RAM-GDS-DOCKL-ZE20PD2U:Compatible with PowerPack batterieEasy insertion and removalAdditional mounting plate for attaching additional devices or accessoriesCan only be used with IntelliSkin Next Generation protective sleeveLockable with KeysInput Connector: USB-CPower Output: 60WOutput Voltage: 5-20V @ 3AOutput Connector: 2x USB-A 2.0 (Peripheral output - 900mAh per Port)Transfer Speed: 12MbpsInput Cable Length: ca. 21 cmOutput Cable Length: ca. 21 cmCertifications: RoHS, WEEE, CE & UKCAAdditional information: To use the ... Unknown localization key: "more"

Objev podobné jako RAM Mounts RAM-GDS-DOCKL-ZE20PD2U GDS Form-Fit Holder (Key-Locking) for Zebra ET40/45 (8")